hello all, my x8 i can't boot to flashmode anymore.. I'm using nAa ICS 2 kernel and MiniCM9 3.0.5 by nAa.. I want to flash to nAa-jb-3 and then update to MiniCm10 but can't boot my phone to flashmode.. It just doesn't respond while I'm holding the back button..install flashtool lastest version but same, tried removing and reinstalling usb drivers, rebooting pc several times but nothing helps.
Flash tool just says that the phone is connected but usb debugging is off.. But when i boot it back into normal state or in recevory mode, debugging is on, kernel and software is recognized and everything is working as it should..bootloader unlock.
Here Log :
Code:
02/022/2013 01:22:56 - INFO - <- This level is successfully initialized
02/022/2013 01:22:56 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
02/022/2013 01:22:56 - INFO - You can drag and drop ftf files here to start flashing them
02/023/2013 01:23:03 - INFO - Device connected with USB debugging on
02/023/2013 01:23:04 - INFO - Connected device : E15
02/023/2013 01:23:04 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call binary.
02/023/2013 01:23:04 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02 / Build number : IMM76L
02/023/2013 01:23:05 - INFO - Root Access Allowed
02/023/2013 01:23:44 - INFO - Selected E15_2.6.32.60-nAa-03.ftf
02/023/2013 01:23:44 - INFO - Preparing files for flashing
02/023/2013 01:23:45 - INFO - Please connect your device into flashmode.
02/023/2013 01:23:57 - INFO - Device disconnected
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
02/024/2013 01:24:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
1 question ..driver x8 name sa0101usb or sa0102adb ?or same?
Shutdown the phone, remove battery for 2 min. And then try:thumbup:
Sent from my E15i using xda app-developers app
rmgaikwad said:
Shutdown the phone, remove battery for 2 min. And then try:thumbup:
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
doesn't work.. I'm holding the back button while the phone is off and plug the charger.. still won't boot to flashmode just blank black no green lcd.. And, as soon as i let go of the back button, the phone starts charging itself..
if your phone is charging or just connect in flash mode(greenlight) its soft brick.! can recover
if your phone is not respond to any action, its dead can recover by changing your mother BOARD
paulebe525 said:
if your phone is charging or just connect in flash mode(greenlight) its soft brick.! can recover
if your phone is not respond to any action, its dead can recover by changing your mother BOARD
Click to expand...
Click to collapse
but my phone can't boot to flashmode ,there no greenlight LED
i tired unplug usb-> power off -> hold back button -> plug usb ..holding 1-2minute just blank..relase hold back turn into offline charger
my phone brick?but anyting fine ..can boot to cwm,boot normal, just can't boot to flash mode :crying:
Disable your antivirus(if you have any) may helps
stamatis said:
Disable your antivirus(if you have any) may helps
Click to expand...
Click to collapse
i not use any antivirus but same can't boot flashmode :crying:
Stop posting same question in different threads!!
02/024/2013 01:24:13 - info - device connected with usb debugging off
Click to expand...
Click to collapse
learn to read your own posts too. Got your answer yet?
R: [Q] Cant' boot to flashmode X8
Try this: with phone attached by usb and flashtool open restart phone from power button ... the led may become green for a while.... however im sure is a pc problem.
Sent from my E15a using xda
picard80 said:
Try this: with phone attached by usb and flashtool open restart phone from power button ... the led may become green for a while.... however im sure is a pc problem.
Sent from my E15a using xda
Click to expand...
Click to collapse
yeah i think have problem with connect usb..
if i plug usb to leptop with win7 or winxp sp3, nothing driver detect just charging work ,,no usb debug connect or usb mass storage
if i plug usb to old pc with winxp sp3,,driver detect SEMC HSUSB Device (adb driver and ums driver),i update driver detected as sa0102adb.inf (sony ericsson sa0102 ADB interface device),,sa0102adb for x10 right?x8 use sa0102usb right?everyting fine if i plug x8 to old pc
just 1 problem can't put x8 to flash mode..blank screen+no led green while i power off and holding back ..i relase hold back after 1-3min ,,x8 turn to offline charging animation (1-2sec) logo nAa karnel logo show with led yellow(led stat battey)
now i wait 5-8hour..wow led change to red..but why in offline charging logo nAa battery not increase after holding back button and flashtool waiting my x8 connect to flash mode :crying::crying::crying::crying:
any solutionn /_?_?_?_?_\
i test use my sister laptop use win7 too ..x8 sync device not recornized - unkown device
tired installing driver can't install driver ADB driver
i try poweroff and hold back = greennnn led light....but still device not recornized in windows notification and in flashtool just say "device connected with usb debug off ,and be sure device 2011 not in MTP"..
what is problem ???wrong install driver ??make me confused 3 day
1. why every i plug usb to detected driver ..battery charging led light and i unplug usb led gone but icon battery still charging ..cant' to flashmode just stay offline charging after relased hold back
2. why every i plug usb to device not recornized ..battery charging led light and i unplug usb led gone icon battery gone ..but i can boot to flashmode...
somebody help meee....
sory for my bad english
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
as I said in the other thread, turn on usb debugging
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
NiM72NiK said:
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
Click to expand...
Click to collapse
No i can't go into Flash Mode
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
unfortunately your phone is hard bricked as its blinking red to everything and must open your phone and hard repair it
follow the instructions on the link below
hope it helps:
http://forum.xda-developers.com/showthread.php?t=2646405
and this is the latest s1 boot .use this one
forum.xda-developers.com/attachment.php?attachmentid=2771435&d=1401467170
ok u give more details for test point and confirm we can try for z1 sir
gregbradley said:
as I said in the other thread, turn on usb debugging
Click to expand...
Click to collapse
no i cant turn usb debugging its full dead ?
srichinu said:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
Click to expand...
Click to collapse
Open Flash Tools, select FTF and wait till it says connect your phone. Now hold down volume and plug in USB to PC
If continued, be happy
If not, unplug fully, and then again hold down volume, and then a bit plug in, like image in the link below
Sorry for bad explanation
I experienced brick about five times, and this my own-made method help me
http://d-h.st/FrT
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
srichinu said:
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
Click to expand...
Click to collapse
I think I got what you said
By this method, maybe PC says USB not recognized, but flashing will be done, with no problem
Sent from my C6903 using Tapatalk
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
NiM72NiK said:
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
Click to expand...
Click to collapse
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
SaeedFazlollahzadeh said:
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
He has to open it connect the testpoint to GND and conmect the usb cable and repair it in emergency mode...
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
Next time do not be so fast and lazy to read instructions provided by developer of the thing you have flashed. Being fast and thinking wrong and fast sometimes produce fatal thing to the your phone. I am sure you will be no lazy next time and I am sure you will be very careful in operations with your next phone
Whats happening when you press and hold for about 5 secconds power + volumeup button? If you see vibration than you are not in hard brick! If there is no vibration but your phone flashing red all time than its hard brick! If not hard brick you can enter into fastboot mode: disconnect usb cable, press and hold power+volume up until you see vibration, than hold volume up button and in same time connect usb cable. After than you must see blue led! If no blue led than probably try to replace usb drivers by installing sony pc companion, reboot computer after that! Allso make sure comuter device manager detect your phone propertly! After that try again all steps. If this not help and you have red light all time than probably your phone is dead! Hope this help.
Hi everyone, i'm newbie here and, for first i'm so sorry formy bad english, but, anyway
My problem is serously hard, someone here having problem like me, for example - click.
Okey, so now my problem: Xperia C5303, i'm don't know which firmware was stay at this XPS until them became bricked, not my phone
Phone isn't boot, don't react to power\+ and - button, when i try to connect it to PC, the phone light up red when attempting to charge, remain solid red for 10 minutes before the LED switches off for around 5-7 minutes.The phone then use to go back to the red LED and the loop would continue. I take a multimeter, plug it at + and - to the batttery, when i connecting USB, RED light up, voltage going to ~3.20V, after RED light switches off and voltage going to ~2.8V and phone again charged to 3.2V and loop, loop, loop. If i disconnect USB cable with 2.9V-3.1V and press PWR button, RED light blinks 3 times, like them discharged. So, i can't put phone to Flashmode\Fastboot mod, for first i think, maybe not enough charging on battery for start flashmode\fastboot, BUT, I was wrong, i charge battery for 4-5Hrs without phone, just use AAA and AA charger laugh,voltage around 3.6V, connected to phone, connect USB and...nothing, just nothing, don't react to anyting, as I understand USB transmits a signal if battery is discharging And, when i connect charged battery and click pwr button, voltage started to fall as if the phone is switched on.
Soooo, in Flashtool, when i connected phone with pressed - button\+ button, PC determine phone like HID device!!!, wooow, how?
I install all drivers that i know, SEUS, PC Compasion, Flastool drivers, drivers from XDA worum for all Sony phones.
Flashtool log:
25/010/2014 15:10:11 - INFO - Device connected with USB debugging off
25/010/2014 15:10:11 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/010/2014 15:10:17 - INFO - Device disconnected
DeviceID in device manager:
USB\VID_0FCE&PID_D17B&REV_0000
USB\VID_0FCE&PID_D17B
So, what to do for debrick this XSP?
Maybe try to install XP? Ah, my OS is Win7 x64
Thanks for all your asweres, best regards, LiquidNettle :3
Stay awesome.
______
I will add, that's what Flashtool showin when pressing Devices - Check drivers:
5/006/2014 16:06:17 - INFO - Device connected with USB debugging off
25/006/2014 16:06:17 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/006/2014 16:06:20 - INFO - List of connected devices (Device Id) :
25/006/2014 16:06:20 - INFO - - USB\VID_0FCE&PID_D17B\5&10EF021E&0&2 Driver installed : true
25/006/2014 16:06:21 - INFO - - HID\VID_0FCE&PID_D17B\6&17F701B0&2&0000 Driver installed : true
25/006/2014 16:06:21 - INFO - List of ADB devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:21 - INFO - List of fastboot devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:22 - INFO - Device disconnected
Flash an FTF file (original firmware) using Flashtool.
They can be found on this forum.
Gamm86 said:
Flash an FTF file (original firmware) using Flashtool.
They can be found on this forum.
Click to expand...
Click to collapse
Thanks for fast answer but how? I can't put phone to flashmode!
Let your phone charge with a wall socket charger (preferably the original one) for atleast 12 hours and then try again.
Done, I will inform you 12 hours pass
@Liquid have this Problem too. Have u found a answer
Gesendet von meinem SGP521 mit Tapatalk 4
arty06 said:
@Liquid have this Problem too. Have u found a answer
Gesendet von meinem SGP521 mit Tapatalk 4
Click to expand...
Click to collapse
Hi arty
No, not found yet :c
Right now, whaiting 12hrs like Gamm say. I installed WinXP and he, too, see the phone as a HID device, WHY? And, if i trying put original, ADB drivers i get an error :c
So, we can't coop with you, arty and try to find how to unbrick our phones
@LiquidNettle
Your phone is indeed hard bricked. Sorry for that. You can try connecting to flashmode by using the technique this guy did: http://forum.xda-developers.com/showpost.php?p=54541794&postcount=1870
[/COLOR]
LiquidNettle said:
Hi arty
No, not found yet :c
Right now, whaiting 12hrs like Gamm say. I installed WinXP and he, too, see the phone as a HID device, WHY? And, if i trying put original, ADB drivers i get an error :c
So, we can't coop with you, arty and try to find how to unbrick our phones
Click to expand...
Click to collapse
Do u have CWM on ur Device? I flash my ROM new with it and it works.:victory:
LiquidNettle said:
Hi everyone, i'm newbie here and, for first i'm so sorry formy bad english, but, anyway
My problem is serously hard, someone here having problem like me, for example - click.
Okey, so now my problem: Xperia C5303, i'm don't know which firmware was stay at this XPS until them became bricked, not my phone
Phone isn't boot, don't react to power\+ and - button, when i try to connect it to PC, the phone light up red when attempting to charge, remain solid red for 10 minutes before the LED switches off for around 5-7 minutes.The phone then use to go back to the red LED and the loop would continue. I take a multimeter, plug it at + and - to the batttery, when i connecting USB, RED light up, voltage going to ~3.20V, after RED light switches off and voltage going to ~2.8V and phone again charged to 3.2V and loop, loop, loop. If i disconnect USB cable with 2.9V-3.1V and press PWR button, RED light blinks 3 times, like them discharged. So, i can't put phone to Flashmode\Fastboot mod, for first i think, maybe not enough charging on battery for start flashmode\fastboot, BUT, I was wrong, i charge battery for 4-5Hrs without phone, just use AAA and AA charger laugh,voltage around 3.6V, connected to phone, connect USB and...nothing, just nothing, don't react to anyting, as I understand USB transmits a signal if battery is discharging And, when i connect charged battery and click pwr button, voltage started to fall as if the phone is switched on.
Soooo, in Flashtool, when i connected phone with pressed - button\+ button, PC determine phone like HID device!!!, wooow, how?
I install all drivers that i know, SEUS, PC Compasion, Flastool drivers, drivers from XDA worum for all Sony phones.
Flashtool log:
25/010/2014 15:10:11 - INFO - Device connected with USB debugging off
25/010/2014 15:10:11 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/010/2014 15:10:17 - INFO - Device disconnected
DeviceID in device manager:
USB\VID_0FCE&PID_D17B&REV_0000
USB\VID_0FCE&PID_D17B
So, what to do for debrick this XSP?
Maybe try to install XP? Ah, my OS is Win7 x64
Thanks for all your asweres, best regards, LiquidNettle :3
Stay awesome.
______
I will add, that's what Flashtool showin when pressing Devices - Check drivers:
5/006/2014 16:06:17 - INFO - Device connected with USB debugging off
25/006/2014 16:06:17 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/006/2014 16:06:20 - INFO - List of connected devices (Device Id) :
25/006/2014 16:06:20 - INFO - - USB\VID_0FCE&PID_D17B\5&10EF021E&0&2 Driver installed : true
25/006/2014 16:06:21 - INFO - - HID\VID_0FCE&PID_D17B\6&17F701B0&2&0000 Driver installed : true
25/006/2014 16:06:21 - INFO - List of ADB devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:21 - INFO - List of fastboot devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:22 - INFO - Device disconnected
Click to expand...
Click to collapse
@Liquid: I am also facing the same problem. My phone is not responding to any hardware activity. Did you tried to connect the phone in flash mode after removing battery.? Tell me if this works.
Hi all guys, thanks for your activity ^)
TechnoSparks said:
@LiquidNettle
Your phone is indeed hard bricked. Sorry for that. You can try connecting to flashmode by using the technique this guy did: http://forum.xda-developers.com/showpost.php?p=54541794&postcount=1870
Click to expand...
Click to collapse
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
arty06 said:
[/COLOR]
Do u have CWM on ur Device? I flash my ROM new with it and it works.:victory:
Click to expand...
Click to collapse
I don't know what this phone have or haven't, i doesnt see this phone when them switched on, but congratulations you're lucky
And i can't isntall anything, beaucase i can't enter in fastboot :c
SumitDhingra said:
@Liquid: I am also facing the same problem. My phone is not responding to any hardware activity. Did you tried to connect the phone in flash mode after removing battery.? Tell me if this works.
Click to expand...
Click to collapse
How? Connect USB with pressing - button and remove battery or remove batter and connect USB with minus button?
Oh, somethimes, phone conenctng as QHSUSB_DLOAD what is it?
LiquidNettle said:
Hi all guys, thanks for your activity ^)
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
I don't know what this phone have or haven't, i doesnt see this phone when them switched on, but congratulations you're lucky
And i can't isntall anything, beaucase i can't enter in fastboot :c
How? Connect USB with pressing - button and remove battery or remove batter and connect USB with minus button?
Click to expand...
Click to collapse
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
SumitDhingra said:
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
Click to expand...
Click to collapse
Xperia SP's battery is built-in.
LiquidNettle said:
Hi all guys, thanks for your activity ^)
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
Click to expand...
Click to collapse
I can't check it out, but do stay tune as I will post it shortly.
You do not need to think about how was it detected by your computer. You just need to make sure it is connected to Flashtool. Either way, you must retry the method I have linked you to, or try the one in this link: http://forum.xda-developers.com/showpost.php?p=54634835&postcount=35
Does your phone able to connect to your computer by any means? I mean does Windows ever detect any presence of device (noticeably the usual "installing driver" balloon or the "hardware connect" sound)?
SumitDhingra said:
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
Click to expand...
Click to collapse
Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
TechnoSparks said:
Xperia SP's battery is built-in.
I can't check it out, but do stay tune as I will post it shortly.
You do not need to think about how was it detected by your computer. You just need to make sure it is connected to Flashtool. Either way, you must retry the method I have linked you to, or try the one in this link: http://forum.xda-developers.com/showpost.php?p=54634835&postcount=35
Does your phone able to connect to your computer by any means? I mean does Windows ever detect any presence of device (noticeably the usual "installing driver" balloon or the "hardware connect" sound)?
Click to expand...
Click to collapse
Still nothing
Yeah, its all okey
E=LiquidNettle;55717389]Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
Still nothing
Yeah, its all okey[/QUOTE]
Can you tell me how did you bricked your phone?
SumitDhingra said:
E=LiquidNettle;55717389]Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
Still nothing
Yeah, its all okey
Click to expand...
Click to collapse
Can you tell me how did you bricked your phone?[/QUOTE]
I can't :laugh:
Its not my phone, I got a freebie. Guy, who gave me this phone say, what his girlfriend dropped and LCD is damaged, that's all.
Phone not powering up
Phone not powering up
My phone Sony Xperia SP went dead after flashing the kernal mentioned in http://forum.xda-developers.com/show...697865&page=36
Not showing any activity.
Now phone is not powering on ..
I was having a unlocked bootloader + root + cm11
I flashed the new kernal using Flash tool.
Can anyone please help me.
This issue is resolved.
Please find the solution here
sanusunnyk said:
Phone not powering up
My phone Sony Xperia SP went dead after flashing the kernal mentioned in http://forum.xda-developers.com/show...697865&page=36
Not showing any activity.
Now phone is not powering on ..
I was having a unlocked bootloader + root + cm11
I flashed the new kernal using Flash tool.
Can anyone please help me.
Click to expand...
Click to collapse
Flash stock ftf via flashtool
rdlegy said:
Flash stock ftf via flashtool
Click to expand...
Click to collapse
His phone has already working normally. He should edit the question when he succeeded with his phone though.