IF THIS HAS BEEN SOLVED SOMEWHERE PLEASE TELL ME ASAP
sorry this is first post. Cheers
Hello XDA!
man ive nervous to post..
BUT i have come a null/null IMEI reading after a CM10.1 bootloop issue and trying to flash a new CM.
I have been a XDA follower for about 9 months but I have never needed to post for anything, as you have carried all of the lords answers. :angel:
I have done, stock firmware reset, Param bin, wiped all done it again. etc etc.
Many a conclusion has led me to probably a service repair centre.
I believe one option will still work for my IMEI restore but my phone comes up with a command that makes no sense.
Any help would be appreciated.
I am currently using QPST Configuration to write my IMEI back to my phone.
I have got these programs http://forum.xda-developers.com/showthread.php?t=1804117
Aswell as another handy IMEI converter to make sure my IMEI HEX conversion correct. (sorry cannot link. cannot find)
I have been using QPST and can follow all steps, except my phone WILL not show on on active phones.
I have reinstalled drivers and followed all necessary steps.
I have tried it in recovery mode also in QPST and no active phone still.
I believe i can get this to work, just need it to recognize my phone, and ill write the IMEI and hopefully..
Voila.. i can call the GF and tell her to chill. :good:
IS RNDIS different to RNMET? (how big of an impact will this play on the process)
In qualcomm settings i get "RNDIS + DM + MODEM" but i do not get "RNMET + "
SOLVED:FLASH PERSEUS KERNEL AND CALL GIRLFRIEND
samsung i9305
Unitized said:
IF THIS HAS BEEN SOLVED SOMEWHERE PLEASE TELL ME ASAP
sorry this is first post. Cheers
Hello XDA!
man ive nervous to post..
BUT i have come a null/null IMEI reading after a CM10.1 bootloop issue and trying to flash a new CM.
I have been a XDA follower for about 9 months but I have never needed to post for anything, as you have carried all of the lords answers. :angel:
I have done, stock firmware reset, Param bin, wiped all done it again. etc etc.
Many a conclusion has led me to probably a service repair centre.
I believe one option will still work for my IMEI restore but my phone comes up with a command that makes no sense.
Any help would be appreciated.
I am currently using QPST Configuration to write my IMEI back to my phone.
I have got these programs http://forum.xda-developers.com/showthread.php?t=1804117
Aswell as another handy IMEI converter to make sure my IMEI HEX conversion correct. (sorry cannot link. cannot find)
I have been using QPST and can follow all steps, except my phone WILL not show on on active phones.
I have reinstalled drivers and followed all necessary steps.
I have tried it in recovery mode also in QPST and no active phone still.
I believe i can get this to work, just need it to recognize my phone, and ill write the IMEI and hopefully..
Voila.. i can call the GF and tell her to chill. :good:
IS RNDIS different to RNMET? (how big of an impact will this play on the process)
In qualcomm settings i get "RNDIS + DM + MODEM" but i do not get "RNMET + "
SOLVED:FLASH PERSEUS KERNEL AND CALL GIRLFRIEND
Click to expand...
Click to collapse
which rom u flash i having i have been googling for and tried all th steps and solution can u help me it would kindful
completely lost and its been a week of em trying to get this phone to accept sp,ething form odin and still noluck ive been glued to this computer and learned alot but nothing that has been able to fix my issue, any help would be appreciated please and thankyou
jpres1991 said:
completely lost and its been a week of em trying to get this phone to accept sp,ething form odin and still noluck ive been glued to this computer and learned alot but nothing that has been able to fix my issue, any help would be appreciated please and thankyou
Click to expand...
Click to collapse
Can you please elaborate. .what exactly the issue...what you did?
manishvy said:
Can you please elaborate. .what exactly the issue...what you did?
Click to expand...
Click to collapse
i have had my device rooted since the week i got it in october successfully, no issues. when i got the phone it was on the oi6 firmware, rooted it and put MOAR rom on it, no issues. then on the 23rd the day before i was going to go out of town i changed my primary google account password on my device, and for some reason i couldnt tell you why other than it didnt seem that it would be of any significance that OEM UNLOCK option was enabled so i turned it off not thinking anything of it, and right after i reboot the phone i found myself in a bootloop. only going to samsung galaxy note 5 powered by android with little red writing at top that says custom binary blocked by FRP lock. so i did some research and it became obvious what my issue was that the oem unlock should never had been touched. from what i figure, but that didnt validate why i was never given the chance to actually verify my account being that the device hasnt booted back into the os or any screen other than the splash screen i mentioned and download mode. thats the only two things i can access my download screen reads this
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:2 K:0 S:0
i have tried flashing stock oi6, ive tried PIT file for oi6 ive gotten errors starting from couldnt open com port ehich seems to vary from the different versions of odin more or less, ive gotten complete write fail error, ive gotten COULDNT GET PIT FOR MAPPING as well as THERE IS NO PIT, and so i tried flashing one andit failed or just wouldnt go through, i mean ive just about ran the well dry as far as what ive read to do. Odin recognozes the device, i just cant get it to flash anything. as for all i know the device is wiped. my assumption.
http://forum.xda-developers.com/showthread.php?t=3191927
FRP LOCK ON Can't ODIN firmware... Lord help me.
---------- Post added at 08:31 PM ---------- Previous post was at 08:31 PM ----------
Seems this guy got his working
Try use Samsung KIES (or Samsung Smart Switch) on Windows PC to flash/restore your firmware. I've never had to this way though.
And BTW. This is not a "hard brick", so your thread title is misleading. It's "soft"...
jpres1991 said:
i have had my device rooted since the week i got it in october successfully, no issues. when i got the phone it was on the oi6 firmware, rooted it and put MOAR rom on it, no issues. then on the 23rd the day before i was going to go out of town i changed my primary google account password on my device, and for some reason i couldnt tell you why other than it didnt seem that it would be of any significance that OEM UNLOCK option was enabled so i turned it off not thinking anything of it, and right after i reboot the phone i found myself in a bootloop. only going to samsung galaxy note 5 powered by android with little red writing at top that says custom binary blocked by FRP lock. so i did some research and it became obvious what my issue was that the oem unlock should never had been touched. from what i figure, but that didnt validate why i was never given the chance to actually verify my account being that the device hasnt booted back into the os or any screen other than the splash screen i mentioned and download mode. thats the only two things i can access my download screen reads this
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:2 K:0 S:0
i have tried flashing stock oi6, ive tried PIT file for oi6 ive gotten errors starting from couldnt open com port ehich seems to vary from the different versions of odin more or less, ive gotten complete write fail error, ive gotten COULDNT GET PIT FOR MAPPING as well as THERE IS NO PIT, and so i tried flashing one andit failed or just wouldnt go through, i mean ive just about ran the well dry as far as what ive read to do. Odin recognozes the device, i just cant get it to flash anything. as for all i know the device is wiped. my assumption.
Click to expand...
Click to collapse
just flash latest stock firmware through odin and your phone will be completely wiped and back to normal.
54NJ41 said:
just flash latest stock firmware through odin and your phone will be completely wiped and back to normal.
Click to expand...
Click to collapse
You can't if OEM UNLOCK is not enabled. ...
UpInTheAir said:
You can't if OEM UNLOCK is not enabled. ...
Click to expand...
Click to collapse
how do you reckon i flash it using kies or smart switch ? i dont have my serial number and the device isnt recognized in kies or smart switch
jpres1991 said:
how do you reckon i flash it using kies or smart switch ? i dont have my serial number and the device isnt recognized in kies or smart switch
Click to expand...
Click to collapse
It's on the box your bought it with. ...
UpInTheAir said:
You can't if OEM UNLOCK is not enabled. ...
Click to expand...
Click to collapse
for me it worked and use latest Odin
UpInTheAir said:
You can't if OEM UNLOCK is not enabled. ...
Click to expand...
Click to collapse
UpInTheAir said:
It's on the box your bought it with. ...
Click to expand...
Click to collapse
im 100 % sure ive tried all the numbers on the box
jpres1991 said:
im 100 % sure ive tried all the numbers on the box
Click to expand...
Click to collapse
I'm sorry, this is where my help ends.
Awfully suspicious if you can't find your serial number.
They all come on the sticker that seals the two halves of the box. This is standard from Samsung.
And you're in the wrong forum. .
UpInTheAir said:
I'm sorry, this is where my help ends.
Awfully suspicious if you can't find your serial number.
They all come on the sticker that seals the two halves of the box. This is standard from Samsung.
And you're in the wrong forum. .
Click to expand...
Click to collapse
WELL THANKYOU for your detective like skills considering i know my imei and meid by heart would you like photographs of my box
fact of the matter is is smart switch DOES NOT recognize the numbers give it a try detective
model number is SM-N920P
MEID_DEC: 256691545905342464
MEID_HEX: 99000583518500
ESN_HEX: 80ED70AD
ESN_DEC: 12815560877
SPC: 970920
jpres1991 said:
i have had my device rooted since the week i got it in october successfully, no issues. when i got the phone it was on the oi6 firmware, rooted it and put MOAR rom on it, no issues. then on the 23rd the day before i was going to go out of town i changed my primary google account password on my device, and for some reason i couldnt tell you why other than it didnt seem that it would be of any significance that OEM UNLOCK option was enabled so i turned it off not thinking anything of it, and right after i reboot the phone i found myself in a bootloop. only going to samsung galaxy note 5 powered by android with little red writing at top that says custom binary blocked by FRP lock. so i did some research and it became obvious what my issue was that the oem unlock should never had been touched. from what i figure, but that didnt validate why i was never given the chance to actually verify my account being that the device hasnt booted back into the os or any screen other than the splash screen i mentioned and download mode. thats the only two things i can access my download screen reads this
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:2 K:0 S:0
i have tried flashing stock oi6, ive tried PIT file for oi6 ive gotten errors starting from couldnt open com port ehich seems to vary from the different versions of odin more or less, ive gotten complete write fail error, ive gotten COULDNT GET PIT FOR MAPPING as well as THERE IS NO PIT, and so i tried flashing one andit failed or just wouldnt go through, i mean ive just about ran the well dry as far as what ive read to do. Odin recognozes the device, i just cant get it to flash anything. as for all i know the device is wiped. my assumption.
Click to expand...
Click to collapse
mate, its really nothing to worry about, it isnt hard bricked,
i had the exam same issue, that oem lock can be a real pain in the arse,
all you need to do is download the firmware, and i mean not just the same android version, but the same, as in oc1 ok1, what ever version you were rocking,
in my case it was the latest firmware available on sammobile,
and flash it via odin,
after that you must wipe cache, data, and factory reset to be a able to use your phone,
once booted,
you can login with you google account, enable oem unlock from dev mode, and install custom recovery and do what you do from there.
cheers
UpInTheAir said:
I'm sorry, this is where my help ends.
Awfully suspicious if you can't find your serial number.
They all come on the sticker that seals the two halves of the box. This is standard from Samsung.
And you're in the wrong forum. .
Click to expand...
Click to collapse
urmother93 said:
mate, its really nothing to worry about, it isnt hard bricked,
i had the exam same issue, that oem lock can be a real pain in the arse,
all you need to do is download the firmware, and i mean not just the same android version, but the same, as in oc1 ok1, what ever version you were rocking,
in my case it was the latest firmware available on sammobile,
and flash it via odin,
after that you must wipe cache, data, and factory reset to be a able to use your phone,
once booted,
you can login with you google account, enable oem unlock from dev mode, and install custom recovery and do what you do from there.
cheers
Click to expand...
Click to collapse
SO dont do the ok3 if thats not what i was on prior to this happening?
my phone isnt recgonized in odin now for some reason. it has been up until now
I can solve your problem with Fap Lock On
hoangps said:
I can solve your problem with Fap Lock On
Click to expand...
Click to collapse
ALL EARS
So long as you are using genuine Samsung firmware or smart switch you do not need OEM unlocked.
If Odin is not recognizing your phone something has gone wrong with either your drivers or your phone is in a bad state.
Power down your phone, if you have to because it is restarting, catch it so you get back into download mode.
Then follow these steps exactly as they are laid out.
Open Smart Switch, click MORE, click Emergency software recovery and initialization, click device initialization, type in your model number using caps and dashes such as SM-N9200 or whatever your device is, then input your serial number again using caps for all the letters in your SN, finally connect your phone to your PC and continue with the prompts from Smart Switch.
The problem is since you have a carrier version, smart switch may not work. There was a guy who said it would not work for an AT&T phone.
Good luck.
Edit: I checked in smart switch using the sprint model number and it took it so you should be good to go.
CodeNameRedNeck said:
So long as you are using genuine Samsung firmware or smart switch you do not need OEM unlocked.
If Odin is not recognizing your phone something has gone wrong with either your drivers or your phone is in a bad state.
Power down your phone, if you have to because it is restarting, catch it so you get back into download mode.
Then follow these steps exactly as they are laid out.
Open Smart Switch, click MORE, click Emergency software recovery and initialization, click device initialization, type in your model number using caps and dashes such as SM-N9200 or whatever your device is, then input your serial number again using caps for all the letters in your SN, finally connect your phone to your PC and continue with the prompts from Smart Switch.
The problem is since you have a carrier version, smart switch may not work. There was a guy who said it would not work for an AT&T phone.
Good luck.
Edit: I checked in smart switch using the sprint model number and it took it so you should be good to go.
Click to expand...
Click to collapse
yes i can get it in download mode ive installed the drivers from samsung website for the note 5, and installed them. is there other drivers i should install fgor it to recognize it? i also am successful in getting smart switch to recognize the SM-N920P for my phone model but i am unclear on how to obtain the serial number that smart switch wants. ive tried the dec hex the imei esn hex and the spc none of which it accepts. i have the box and it doesnt say serial number anywhere so im lost when i get to that point
jpres1991 said:
i am unclear on how to obtain the serial number that smart switch wants. ive tried the dec hex the imei esn hex and the spc none of which it accepts. i have the box and it doesnt say serial number anywhere so im lost when i get to that point
Click to expand...
Click to collapse
That is a problem then because you need that number. It should be labeled SN and should be a mix of letters and numbers. Perhaps sprint keeps those records on file.
Good luck.
Hey guys.
Ok so I deleted some of my photos by mistake so i tried to recover them so I use "DR.Fone" programm ,
after that I see some annoyin message on notification screen "Unauthorized actions detected. Please reactivate your device to undo any unauthorized changes made"
and doesnt matter what I try to do it wont go ( I tried : restart phone, hard reset, wipe cache ,reset factory settings) nothing helped,
after that I also noticed that when I tried to update my phone by OTA updates it also gives me an error
"An unauthorized change was made to your device's operating system. Try downloading software support by smart transfer on your computer or visiting a customer service center"
I really want to fix it and I have no idea how , my phone is only 1 month old,
Big thanks for helpers!
Phone : Samsung Galaxy 7S SM-G930F
SpaanKk said:
Hey guys.
Ok so I deleted some of my photos by mistake so i tried to recover them so I use "DR.Fone" programm ,
after that I see some annoyin message on notification screen "Unauthorized actions detected. Please reactivate your device to undo any unauthorized changes made"
and doesnt matter what I try to do it wont go ( I tried : restart phone, hard reset, wipe cache ,reset factory settings) nothing helped,
after that I also noticed that when I tried to update my phone by OTA updates it also gives me an error
"An unauthorized change was made to your device's operating system. Try downloading software support by smart transfer on your computer or visiting a customer service center"
I really want to fix it and I have no idea how , my phone is only 1 month old,
Big thanks for helpers!
Phone : Samsung Galaxy 7S SM-G930F
Click to expand...
Click to collapse
Try using Samsung SmartSwitch
Or
Try flashing your stock firmware for your country/region/carrier via Odin. Do a Google search for:
"Return to stock (your model number)"
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Try using Samsung SmartSwitch
Or
Try flashing your stock firmware for your country/region/carrier via Odin. Do a Google search for:
"Return to stock (your model number)"
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Yup thats exactlyy what Ive done.
1) download odin
2)download stock ROM from sammobile
3)flash them via odin
4) done.
I've seen alot of people asking about it online so heres the solution if someones looking maybe they will see that.
Thanks anyways
Hi, I have a Galaxy S6 unlocked, before was with T-Mobile. It was rooted and has a problem with service. Always that I was trying to connect with a network says "No Registered". I heard that updating my S6 will help, so I used Smart Switch to do it, I did a backup of everything before starting, but when the installation finished, a litlle message appears saying that I have to install DRK first.
I don't know anything about it and I got scared because I dont know what to do, I hope someone can help me, and if it was a post of this before, please forgive, but I gave up searching for solutions.
nestacash said:
Hi, I have a Galaxy S6 unlocked, before was with T-Mobile. It was rooted and has a problem with service. Always that I was trying to connect with a network says "No Registered". I heard that updating my S6 will help, so I used Smart Switch to do it, I did a backup of everything before starting, but when the installation finished, a litlle message appears saying that I have to install DRK first. I don't know anything about it and I got scared because I dont know what to do, I hope someone can help me, and if it was a post of this before, please forgive, but I gave up searching for solutions.
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3110220
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
DRK Issues tend to be fixed by using combination firmware. It tends to live in either The Modem Firmware, or in the recovery image. Flashing the Combination Firmware for the bootloader revision tends to fix this problem. I've only seen it not fix the issue like one time because it was a modified combination firmware to begin with.