Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Hold vol+ vol- home and pwr buttons at same time, when phone reboot leave only vol+ so they enter on download mode.
Then flash N920GDDU2AOL1 again.
Related
Hi,
I have a GT-S5570 in my hand, actualy....its my friends. It was broken because of fail OTA upgrade. The laucher always freezing. Knowing that, I want to help him to reflashing it. When I checked, I cannot go to download or recovery mode using combo button. I can go to download mode using adb command and it work. I can install CWM (tass-recovery-cwm.tar) which I get it from some site. I can go to CWM recovery mode, I can select the menu using volume button, but I cannot choose the menu using home button. So I try to install several CWM version. First, I try to install clockworkmod-5.0.2.8.tar.md5 (But I'm forget from where I download this file). After flashing and restart, the phone won't start the system. It always stuck on samsung logo and then restarting again. I cannot reflash, because odin no recognizing it, even adb cannot connent to device.
I use jig too (with 301K resistor), but it failed.
Conclusion:
USB JIG : FAILED
Combo button (home+power, home+vol down+power, home+vol down+vol up) : FAILED
Combo button (home+vol up) : FAILED. it only show text below :
lcd_backlight_ctrl start
determine_lcd_type, LCD Type:61bc11
Anyone can help me how to go to download mode on this situation?
If you see the samsung logo you can still go in fastboot, because this last is previous. By phone off go in fastboot and if odin doesn't recognize the phone you probably have a driver problem.
Hi,
I rooted my Samsung Note 4 a couple months ago. Everything has been working great with the rooted device. However, I want to unroot the device so that I can install Android 5 (lollipop). When I press Vol up, center and on/off button, I get the message "dm-verity verification failed". So I cannot install the stock rom with ODIN since ODIN does not recognize the device. I have downloaded the correct version of ODIN, stock rom and windows drivers for Samsung Note 4 SM-N910F.
I also tried returning to factory settings on the recovery mode, but the message is still there.
Can Anybody help me please?
You need to press and hold power button + volume Down + home button to enter download/odin mode and be able to flash via odin
First of all, i am referring to Sm-t713 device.
I had lineage os installed, and today i tried to flash the stock rom using odin
During the process (after i had enter dl mode), i got the message failed at the tablet screen.
So, after that, i pressed Volume down and Power button to reboot the tablet. The tablet screen switches off and turns on again after 1 sec showing the message :
An error has eccured while updating the device software. Use the emergency recovery function in the Smart Switch Pc software.
Is it possible the device is bricked forever?
Can i do something to fix it?
I installed Smart Switch and Samsung Kies, but they don't recognize the device
tzinaski said:
First of all, i am referring to Sm-t713 device.
I had lineage os installed, and today i tried to flash the stock rom using odin
During the process (after i had enter dl mode), i got the message failed at the tablet screen.
So, after that, i pressed Volume down and Power button to reboot the tablet. The tablet screen switches off and turns on again after 1 sec showing the message :
An error has eccured while updating the device software. Use the emergency recovery function in the Smart Switch Pc software.
Is it possible the device is bricked forever?
Can i do something to fix it?
I installed Smart Switch and Samsung Kies, but they don't recognize the device
Click to expand...
Click to collapse
Ignore that message and put the tablet back in download mode then reflash.
Hi together,
i wanted to update my galaxy s10 to android 10 using odin and flashing the firmware.
I wanted to flash bl,ap,csc and cp. during the flashing the device unplugged and I was only able to press powerbutton and vol- for 7 sec.
Then the phone rebooted and i was facing an error screen saying:
An error occured while updating the device software. Use the emergency recovery function in the Smart Switch PC software.
Now i cant get in to fastboot again and smart switch is not detecting the device.
What can i do?
Doest matter, use odin load all 4 files and it will work again
Ty for the replied I just tried IT and IT worked Ty.
Unfortunately I flashed a bad Rom to my note superiorOS rom.
As a result the put is stuck on superiorOS boot logo
I cannot with any of the usual key combos get into recovery mode or display the download mode screen.
I have tried to refresh with odin but although with the superiorOS boot logo it shows as connect to odin it will not get past setupconnection.
Any help would be really great.
Thank you in advance
TD100_1 said:
Unfortunately I flashed a bad Rom to my note superiorOS rom.
As a result the put is stuck on superiorOS boot logo
I cannot with any of the usual key combos get into recovery mode or display the download mode screen.
I have tried to refresh with odin but although with the superiorOS boot logo it shows as connect to odin it will not get past setupconnection.
Any help would be really great.
Thank you in advance
Click to expand...
Click to collapse
If you're using Note9 you can try the following:
- Connect the usb cable to your pc
- Make sure you have the drivers installed (one way to do this is installing Samsung Dex for Windows)
- Press and Hold the Volume Down + Bixby button + Power Button
- After around 7 seconds, the phone should enter Download Mode and you can flash again with Odin or others
Another thing you can do if you have TWRP is first enter on Download mode, choose Restart and immediately after press and hold Volume Up Button + Power Button and it should enter Recovery Mode and boot TWRP
VHFG22 said:
If you're using Note9 you can try the following:
- Connect the usb cable to your pc
- Make sure you have the drivers installed (one way to do this is installing Samsung Dex for Windows)
- Press and Hold the Volume Down + Bixby button + Power Button
- After around 7 seconds, the phone should enter Download Mode and you can flash again with Odin or others
Another thing you can do if you have TWRP is first enter on Download mode, choose Restart and immediately after press and hold Volume Up Button + Power Button and it should enter Recovery Mode and boot TWRP
Click to expand...
Click to collapse
Thank you for your suggestion. Unfortunately I have tried all of those options and none work. My note 9 connects to the PC when I connect it, and shows as connected in Odin however the screen os stuck on the new roms boot logo. When I try and flash firmware through Odin even if I am using the .pit file odin get stuck at setupconnection.