Hi guys!!
They could help me knoww that RECOVERY is right for Marshmallow ; I tried with different ROMS and the problem arises when installing Gapps because after installing the Gapps, not start, the warning "unfortunately has stopped setup wizard " appears , or ocacionan "bootloops" .
I researched and apparently is the RECOVERY , could you please help me?.
ROMS Tested :
CM13
Xperience
BeanStealk
Gapps Tested :
OpenGAPPS
( open_gapps-arm-6.0-nano-20160124.zip , open_gapps-arm-6.0-pico-20160124.zip )
BANK_GAPPS
Dynamic BANK_GAPPS
Tested RECOVERY :
philz touch
TWRP
XT1064
PLEASE HELP!
I'm desperate
Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)
sagar846 said:
Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)
Click to expand...
Click to collapse
Thank you !
Let me try and comment .
Solved
sagar846 said:
Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)
Click to expand...
Click to collapse
Thank you
I commented that worked perfectly . :good: :laugh: :laugh:
Related
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone
Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999
how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up
1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help
What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?
I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!
Hello,
i have recently flashed this rom: http://forum.xda-developers.com/showthread.php?t=2192109 con my i9001
i then tried to flash the gapps-jb-20130301-signed.zip and a more recent 20130421 gapps pack but after flashing using the cwm touch i then reboot and the phone starts normally without any apps installed.
how can i get the gapps to install and work?
thanks
Simone
Hmm, I'd try to wipe everything (rom, dalvik cache, data etc.) and start from scratch with two packages (ROM + chosen GAPPS) then we'll see
just for all of you to know..
since my clockworkmod (i9001 Touch CWM 6.0) taken from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 kept giving me strange script errors not working i decided to change it with this one CWM6014-TOUCH-CM9-recovery.zip from the wiki page http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ClockWorkMod_Recovery
then i did again the same procedure i did a few time till now with the other cwm which is:
wipe data/factory reset
wipe cache
advanced -> wipe dalvik cache
then install from external sd, flashed the rom then flashed the gapps
then reboot phone
i can now say that everything worked fine
so problem was on the cwm! cheers
Hi all,
that's my first post, sorry about my bad english
I have problem with my Xperia Z. I flashed android 4.4.2 by Rajeev from this thread http://forum.xda-developers.com/xperia-z/development/rom-rooted-deodexed-zipaligned-stock-0-t2759467 . I folowed instruction but i had problem with flashing ROM with mounted /system (no matter TWRP or CWM) (I haven't FULL root on my 4.3 ROM, just half rooted)...i solved that this way: went to CWM and fixed permissions in advanced menu, then went to CWM and wiped /data, /cahce, /dalvik AND /SYSTEM, then flash ROM and SuperSu fix. After that I rebooted to system. Everything's fine but when i turned off phone or reboot to system or recovery it goes to bootloop, tried reset by pressing vol up+power - still bootloop.
My specyfication:
Xperia Z C6603,
Android 4.3 [10.4.B.0.569] - half rooted with SuperSu (but apps with root permissions works fine),
PhilZ Touch CWM & TWRP v2.7.62-BETA (newer version didn't work-not boot to recovery)
I tried a few times,lost many hours but still don't works...please help me because this ROM is awesome
Nobody helps me?
merque said:
Nobody helps me?
Click to expand...
Click to collapse
Bro do this
boot to recovery
Format system
format cache
format dalvik cache
format data(not internal sd)
Install rajeevs rom
flash kernel
flash SU
your problem will be solved :highfive:
androidtweaker1 said:
Bro do this
boot to recovery
Format system
format cache
format dalvik cache
format data(not internal sd)
Install rajeevs rom
flash kernel
flash SU
your problem will be solved :highfive:
Click to expand...
Click to collapse
Thx Bro, that was very helpful, now everything's fine
merque said:
Thx Bro, that was very helpful, now everything's fine
Click to expand...
Click to collapse
:good::highfive:
My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.
SHINee2 said:
My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.
Click to expand...
Click to collapse
I will give u a step by step procedure
1. Update you're twrp
2. Download the official cm 12.1 nightly
3. Copy the nightly zip to you're external SD card
4. One main thing u should update you're boot loader as you're saying that you are on stock moto 5.0.2 then your boot loader should be up to date
5. Now make a back up of current ROM
6. Wipe internal , external , dalvik cache , cache
7. Now flash the ROM and gapps and gapps I suggest u to use cm gapps
8. Wipe dalvik cache , cache
9. Reboot your device
If u face any issue after following this procedure also then you re boot to recovery and wipe both the caches
Sent from my Moto G 2014 using XDA Free mobile app
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Notice :-
I tried that with Nightly builds 20150513 and 20150514
have you try the rom without gapps?
if works you have a gapp problem.
try others rom and or gapp combinations.
i use this and is flawless.
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
http://forum.xda-developers.com/moto-g-2014/development/rom-blisspop-v3-0-t3079125
:good:
EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
Your problem is most probably because of gapps . Use different gapps I have never got such problem. I use minimal gapps .! best of luck!:good:
I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?
EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
I had this problem too. Flash a different CM build. There was a bad build that made this problem. I believe it was the May 16th one. (I may be wrong)
EAEN said:
I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?
Click to expand...
Click to collapse
It works perfectly with the XT 1068, you must download the latest cm build, because are better than the previous ones.
the problem was solved after flashing the latest build
Thanks everyone