Database Develop

Random reboots after installing Gapps in Kitkat

Hi
I'm trying to install Kitkat 4.4 with Maclaws cm11. Also tried the carbon rom. All seems to work fine until I flash G apps. Then I get random reboots shortly after boot. Tried both micro and aroma Gapps from Mclaw. Am I alone with this problem? Any suggestions?
I'm using CWM for flashing and wrong cache etc. Baseband I8190XXANA2 in stock 4.1.2 (rooted) which works fine.
After more research it seems like reboots happens also without Gapps. Also happening in 4.3. There was recently a firmware update early this week. Maybe something has changed, breaking custom ROMs.

larscn said:
Hi
I'm trying to install Kitkat 4.4 with Maclaws cm11. Also tried the carbon rom. All seems to work fine until I flash G apps. Then I get random reboots shortly after boot. Tried both micro and aroma Gapps from Mclaw. Am I alone with this problem? Any suggestions?
I'm using CWM for flashing and wrong cache etc. Baseband I8190XXANA2 in stock 4.1.2 (rooted) which works fine.
After more research it seems like reboots happens also without Gapps. Also happening in 4.3. There was recently a firmware update early this week. Maybe something has changed, breaking custom ROMs.
Click to expand...
Click to collapse
Bud,
If you're on stock just do that:
1-Reboot in recovery
2-Choose Wipe data/factory reset
3-Flash cm rom
4-Flash gapps
5-Reboot
Done, that's it. Not complicate.
If you want to update cm roms:
1-Reboot in recovery
2-Flash cm update
3-Choose Wipe cache & dalvik cache
4-Reboot
Done.
You don't need to mess up with anything more. Read my FAQ here for gapps & for more doubts. Have fun

thanks...
mauam said:
Bud,
If you're on stock just do that:
1-Reboot in recovery
2-Choose Wipe data/factory reset
3-Flash cm rom
4-Flash gapps
5-Reboot
Done, that's it. Not complicate.
If you want to update cm roms:
1-Reboot in recovery
2-Flash cm update
3-Choose Wipe cache & dalvik cache
4-Reboot
Done.
You don't need to mess up with anything more. Read my FAQ here for gapps & for more doubts. Have fun
Click to expand...
Click to collapse
Thanks for the advice. I've read the faq's and followed that, but the problem is that my phone just reboots randomly a minute or so after it's booted up. Was suspecting this to be the latest firmware update, but if so the forum would probably been flooded with more with the same problem.
It might be my battery, which is bad. Just got a new one. Charging it now, and will try CM11 again tomorrow. If it still reboots I'll see if I'm able to access the logs to get an idea of whats going on. It works fine on stock, so I'm a bit puzzled... .

Solved
...and after changing battery CM11 runs smooth without reboots .
The reboots happened with the original charger plugged in. Why that didn't happen to the stock ROM I can't explain.
The original Samsung battery scares me a bit. It has become 1-2 mm thicker. Looks like an accident waiting to happen. Have to dispose of safely somehow...quick...

[Q] Official Cyamogenmod 12.1 Bootlop

Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks

Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/

I tried to flash multiple lollipop roms but they all failed to flash except titanrom

My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.

SHINee2 said:
My TWRP version is 2.8.4 and i tried to flash cm roms but they either fail or can't stream videos. Help pls I will provide any information about my phone. Right now I'm running titanrom 5.0.2 on my phone and it works fine but I wanna upgrade to 5.1.
Click to expand...
Click to collapse
I will give u a step by step procedure
1. Update you're twrp
2. Download the official cm 12.1 nightly
3. Copy the nightly zip to you're external SD card
4. One main thing u should update you're boot loader as you're saying that you are on stock moto 5.0.2 then your boot loader should be up to date
5. Now make a back up of current ROM
6. Wipe internal , external , dalvik cache , cache
7. Now flash the ROM and gapps and gapps I suggest u to use cm gapps
8. Wipe dalvik cache , cache
9. Reboot your device
If u face any issue after following this procedure also then you re boot to recovery and wipe both the caches
Sent from my Moto G 2014 using XDA Free mobile app

Problems with TWRP/CyanogenMod 12.1 - Motorola MotoG 2nd Gen XT1068

Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....

Anyone?

my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.

sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere

Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use

[Q] [HELP] Revocery It presents problems with GAPPS (MM)

Hi guys!!
They could help me knoww that RECOVERY is right for Marshmallow ; I tried with different ROMS and the problem arises when installing Gapps because after installing the Gapps, not start, the warning "unfortunately has stopped setup wizard " appears , or ocacionan "bootloops" .
I researched and apparently is the RECOVERY , could you please help me?.
ROMS Tested :
CM13
Xperience
BeanStealk
Gapps Tested :
OpenGAPPS
( open_gapps-arm-6.0-nano-20160124.zip , open_gapps-arm-6.0-pico-20160124.zip )
BANK_GAPPS
Dynamic BANK_GAPPS
Tested RECOVERY :
philz touch
TWRP
XT1064
PLEASE HELP!
I'm desperate

Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)

sagar846 said:
Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)
Click to expand...
Click to collapse
Thank you !
Let me try and comment .

Solved
sagar846 said:
Using TWRP
clean flash cm 13 ( wipe everything except internal storage and ext SD) and flash zip and gapps , wipe dalvik and cache and reboot .
Its got to work since there is no problem at all with any ROM or gapps.
If that doesn't work restore to stock and start the process again (root and stuff)
Click to expand...
Click to collapse
Thank you
I commented that worked perfectly . :good: :laugh: :laugh: