Related
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
water30 said:
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
Click to expand...
Click to collapse
what did you do to get to this screen? Is this after or before you upgraded firmware?
GANJDROID said:
what did you do to get to this screen? Is this after or before you upgraded firmware?
Click to expand...
Click to collapse
after upgrade firmware odin show reset but the my tab not reset then i just manual reset (i can take this method for my galaxys ) after that.....
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
primeroz said:
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
Click to expand...
Click to collapse
Read my above post. Go into download mode (volume down + home + power) you'll still have the same image but the phone WILL be in download mode. Then flash your previous firmware and you're sorted.
Sent from my GT-P1000
You probably got that by messing with the kernel. Fund the zImage from the firmware, extract it with a .tar extractor then use something like heimdall to flash the kernel and it should work.
Sent from my GT-P1000 using Tapatalk
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Help please
slaia said:
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Click to expand...
Click to collapse
Having the same problem too... anyone can help?
If you see Phone-!-Pc on the Tab screen it is the download mode.
You can reflash it using Odin, however, you will need to do full Rom flash. I had similar problem and solved it by replashing.
I followed the latest guide published in this forum and Roto-JME rom with reformatting of internal sd.
Phone ! PC error FML!!!
GANJDROID said:
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
Click to expand...
Click to collapse
Where can i download the JM6 zip??
Hey guys,
I tried to manually update my tab to Gingerbread today via Odin, but it kept hanging on select partition (I discovered I used the wrong PIT for the firmware I was going to flash, but as I didn't select the firmware yet that shouldn't be a problem). At last I decided to quit Odin (which might have been stupid...) and try it again. Then it kept haning even earlier, so I tried to restart the device in download mode. However, whatever I try it keeps giving the Phone ! PC sign. If I try to just boot, if I try to go into recovery mode or if I try to go into download mode. I saw a lot of possible ways to solve the problem, but my PC doesn't recognize the tab anymore. If I connect it, it does give the "usb device connected" sound, but there is a popup which sais "USB Device not recognized. One of the USB Devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message". I already tried to reinstall the driver but it doesn't work. Also Odin and Heimdall don't detect any device.
Does anyone know a solution for this problem? Maybe taking the battery out? (for which I have to buy a new triangle screwdriver, so I need to know if it could possibly work first. It takes some weeks to order such a thing I think...)
EDIT: I played around a bit with the drivers again, and suddenly both Heimdall and Odin recognized it. However Odin stopped recognizing it again. Then I pressed "read PIT" in Heimdall, which worked. After that the device started booting up to the Samsung logo animation and then powered off again. Now it doesn't do anything anymore, not even showing the Phone ! PC screen. I'll charge it overnight (maybe it's gone empty during the process), so I hope that helps.....
In some strange way, the phone works again..... So never mind my post above.
Hey guys.
So I have a problem,
I was on darky's rom 10 and I have installed cyanogenmod7.
After that phone was woooow fast and great and everything...untill I decided to listen some tunes from external sd.
And so I have found out that I can't see external sd because I installed cyanogenmod on non froyo ROM.
Then I've tried to flash stock froyo but odin hanged a long time and I just restarted whole operation.
Now I have an icon ! that phone wants to connect to computer.
I can enter download mode with vol. down + home + power but it that state Odin cant see shiet. Only thing that can see phone in that state is windows (trying to install drivers and then fails!?) and kies (hanging on "connecting").
So, what are my options? Bricked for life? Or..... :S
k that symbol means connectivity issues, so try changing the usb port and if that fails try using another usb cable...run odin as administrator before trying all this!!
ok I've managed to get Odint to recognise it..
I've tried to flash froyo from this topic: http://forum.xda-developers.com/showthread.php?t=853950
and it doest boot, hangs at samsung/galaxy logo 4ever...
flashing darky's 9 resurection also gives no good thing.
just hangs on start samsung/galaxy logo/black screen in loop....
had the same problem as well and it was solved by plugging the usb cable at the back of the pc.
if that doesnt work try flashing other roms... you can find some tutorial on totallydubbed's youtube channel with the link of the rom in the description.
http://www.youtube.com/user/totallydubbedHD
Hey ppl,
I've had an awful fight with this phone and my brain and stupid PC.
omg
So, I have tried to flash 2.2 and it worked, then tried to flash cyanogenmod and it worked (again) but I couldn't reach external sd (again).
So I said to myself...f*** this s*** I'm going on stock,
And I did,
firmware version
2.3.4
baseband version
I9000XXJVR
kernel version
2.6.35.7-I9000XXJVR-CL425308
[email protected] #2
build number
gingerbread.xxjvr
This is what I have, and the problem I'm facing (again) is that phone or pc via USB can't recognise external SD.
Help please.
p.s. how can I easily go to cyanogenmod from here?
Kies is saying that "This version of the device cannot be updated."
Windows can't see either internal or external SD.
update;
I've installed Darky's 10.2 ressurection, something is very wrong with my phone.
Install went fine, rebooted ok.
Still no SD card, when I reinsert it, it says its blank or non supported format.
Tryed to reboot the phone and it just loops on darky's logo/animation.
Help?
Hi!
I just recieved a Galaxy S and i have a problem.
At the beggining, the phone bootloops. Then I full wipe it, so now doesn't have that problem. Now the problem is, that when it loaded and show the start settings (select lang, date, time etc.) every single application on the phone "Force Close" and the phone reboot itself and repeat the same procedure. I don't know what kernel, ROM the phone use, but i think it is the stock one (2.3.4 or 2.3.6)
I am able to go to Download Mode, but when I do that, the phone can't connect with ODIN, also my computer doesn't recognize my phone when i am in Download Mode (when i try to turn on the phone, then my computer recognize: Samsung Android USB ...)
I also tryed to change the ROM via recovery, but there i've got very few options (reboot, apply updates, wipe data, wipe cache), so i'm not able to change the ROM from there.
Please, tell me what to do.
Edit: Sorry for my bad english
I'm pretty sure you only installed the wrong USB drivers. There should be some sort of tutorial on the web to get the right drivers for an Odin access. Anyways, be sure that KIES and all child processes are killed when using Odin (use the task manager to look that up).
Feel free to ask further questions
Sent from my Gameboy Color
http://db.tt/BujOFVxz
Hey! Thanks for the drivers above. The funniest thing is that the computers in my school recognized my phone, so do ODIN. But my computer still not recognized the device. Tonight i will send files to my flashdrive so tomorrow i will flash ROM with ODIN in my school (i have an admin account ) When i get back from school, i'll post the results here.
[sorry for my bad english, again]
Hi, again! Today I messed everything up. First, i flashed with ODIN the Darky's ROM but after installation 20 minutes the phone freezed at the logo (no progress there). Then I flashed CWM with ODIN and tried to install CM10 without success. After the installation the only thing which was changed was the CWM (new version 6.x.x.x). Then I tried to flash new kernel (Semaphore_JB_2.5.0s) and now its freezes at the logo "SEMAPHORE". I dont have recovery anymore, only the Download Mode.
Please, give me a link with the steps or show me how to install new ROM property, because this is the 3rd day i'm trying to start the phone with new ROM. Kies don't help, because "USB Debugging" is not activated on my phone (i can't activate it, because of the problem).
Thanks.
cm9 with odin
for cm9 with odin check this link: http://forum.xda-developers.com/showthread.php?t=1419102
Flashing shouldn't take more than a few minutes. CM9 was stable for me - with cm10 I still have a few problems.
start from stock rom
I think you should flash stock rom first.
flash GB firmware 2.3.6 (recommend JVU).
flash CF-root for jvu.
you can find stock firmware easily here as well.as instructions.
make sure play around with your phone for a while after done. then go ahead to any custom rom.
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
ShahX said:
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
Click to expand...
Click to collapse
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
BWolf56 said:
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
Click to expand...
Click to collapse
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
ShahX said:
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
Click to expand...
Click to collapse
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Amazing Reply! but Still need help
BWolf56 said:
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Click to expand...
Click to collapse
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
ShahX said:
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
Click to expand...
Click to collapse
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Almost Done
BWolf56 said:
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Click to expand...
Click to collapse
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
ShahX said:
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
Click to expand...
Click to collapse
You can give Heimdall a shot (note that it will install its own drivers on the usb port you'll use it on so Odin won't work on it): http://www.mediafire.com/download/5..., NO Bootloaders, Wipe-Heimdall One-Click.zip
If that doesn't work, I can say at like 95% that your internal memory is dead and you'll have to partition an SD card if you wanna get it running. There are guides on how to do it on here.
I've seen that image often. Uninstalling then re-installing the usb drivers for Samsung helped me. Flashing a captivate can be a little convoluted granted all the different methods of acquiring root and flashing a rom that's been used through the years ... and subsequently posted somewhere on the internet. I'd suggest the following .... once your device is recognized in Odin.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Install vcom drivers properly.also i recommend win7 for spft
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Did you get it solved?
Try
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Make sure you have proper drivers installed
can you help me too, with my lenovo a7000 plus ? thanks