This is a Safe Upgrade to the latest Lollipop 5.1.1 firmware (N910VVRU2BPA1) for VZW Samsung Galaxy Note 4 (SM-N910V), both Retail & Developer Editions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
★ What do you mean by "Safe Upgrade"?
The latest N910VVRU2BPA1 bootloader is incremented; i.e., if you take the OTA or flash the official firmware via Odin, you won't be able to downgrade to rootable KitKat 4.4.4.
For Retail Edition: This is very important if you want to gain ROOT access when available & keep it over OTAs then.
For Developer Edition: If the bootloader is incremented with any coming OTA, it'll block your unlocked bootloader for good & you'll end up with a Retail Edition.
Click to expand...
Click to collapse
Check this thread for more details!
Safe upgrade allows you to downgrade to any previous firmware (KK or LP)...
Click to expand...
Click to collapse
★ Disclaimer:THIS SERVICE IS FREE OF CHARGE, USE IT AT YOUR OWN RISK, TAKE IT OR LEAVE IT !
★ Instructions:
Extract the N910VVRU2BPA1_StockRestore.tar.md5 file using 7-Zip
Extract Odin v3.10.7 & open it
Reboot to Download Mode (press and hold Home + Power + Volume Down)
Connect phone and wait until you get a blue sign in Odin
Add the N910VVRU2BPA1_StockRestore.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back & wait a few minutes
Reboot into recovery (press and hold Home + Power + Volume Up)
Wipe data (Factory Reset)
Reboot to system
Special Instructions:
For Retail Edition coming from KK, flash N910VVRU1BOAF_Bootloaders.tar.md5 via Odin
<<<>>>
For Developer Edition with incremented bootloader, use the StockRestore Odin tar for Incremented Bootloader: N910VVRU2BPA1_StockRestore_Incremented.tar.md5.7z
New 5.1.1 and 6.0+ firmwares require system(less) root (SuperSU v2.67 or newer) with a patched or permissive kernel. You may flash MultiSystem kernel for TouchWiz 5.1.1.
Click to expand...
Click to collapse
If you want to root and use a custom kernel (e.g., MultiSystem kernel) with this 100% Stock ODEXED ROM, you may have to remove all KNOX apps and /system/container (check this list). You may also need to edit /system/build.prop and change the following property:
Code:
ro.securestorage.support=true
to
Code:
ro.securestorage.support=false
DO NOT UNINSTALL KNOX APPS WITH TITANIUMBACKUP ! IT REMOVES SOME SYSTEM LIBRARIES AND MAY CAUSE ISSUES.
Click to expand...
Click to collapse
DO NOT FLASH RETAIL BOORLOADER, IT WILL LOCK YOUR DEVICE !
UNCHECK "REACTIVATION LOCK" IN SETTINGS/SECURITY !
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
N910VVZW2BPA1 Stock Restore: N910VVRU2BPA1_StockRestore.tar.md5.7z
md5: 1652ccc37b2d778168ed9519ccdcb6ca
N910VVRU1BOAF Bootloaders (RetEd ONLY): N910VVRU1BOAF_Bootloaders.tar.md5.7z
md5: deeef3cde3941572b036c0f6ea6e92b3
N910VVZW2BPA1 Stock Restore (Incremented): N910VVRU2BPA1_StockRestore_Incremented.tar.md5.7z
md5: 9a377ecdea7e64bb4770634756184765
MultiSystem Kernel (LP 5.1.1): MultiSystem-Kernel_LP-5.1.1.zip
md5: e7d98a2a6d4b0f0b2122bb2353a16b84
Click to expand...
Click to collapse
This is going to make a lot of people happy. I on the other hand was to impatient and am locked in lollipop land bootloader. But awesome work @hsbadr
hsbadr said:
This is a Safe Upgrade to the latest Lollipop 5.1.1 firmware (N910VVRU2BPA1) for VZW Samsung Galaxy Note 4 (SM-N910V), both Retail & Developer Editions.
★ What do you mean by "Safe Upgrade"?
★ Disclaimer:THIS SERVICE IS FREE OF CHARGE, USE IT AT YOUR OWN RISK, TAKE IT OR LEAVE IT !
★ Instructions:
Downloads:
Click to expand...
Click to collapse
Thank you very very much.
I'm not exactly certain how this all works so please bear with me. Does it matter which version of firmware is installed before I do the update?
My Verizon Note 4 is currently on the safe upgrade to BOG5. So, can I simply flash this new firmware to directly upgrade to BPA1, or do I need to downgrade my firmware to some other version first?
Thanks again.
hsbadr said:
This is a Safe Upgrade to the latest Lollipop 5.1.1 firmware (N910VVRU2BPA1) for VZW Samsung Galaxy Note 4 (SM-N910V), both Retail & Developer Editions.
★ What do you mean by "Safe Upgrade"?
★ Disclaimer:THIS SERVICE IS FREE OF CHARGE, USE IT AT YOUR OWN RISK, TAKE IT OR LEAVE IT !
★ Instructions:
Downloads:
Click to expand...
Click to collapse
Sent from my SM-N910V using Tapatalk
Fantastic work, and I thank you very much. With that said:
I'm really curious how a safe upgrade works. I was under the impression that any tampering of the official file (without root/an unlocked bootloader) would cause it to fail/trip the unofficial firmware message, which is why you can't simply put root into the file and flash it. How did you find a way around this?
anrichardson said:
This is going to make a lot of people happy. I on the other hand was to impatient and am locked in lollipop land bootloader. But awesome work @hsbadr
Click to expand...
Click to collapse
Thanks!
Dwillian said:
Thank you very very much.
I'm not exactly certain how this all works so please bear with me. Does it matter which version of firmware is installed before I do the update?
My Verizon Note 4 is currently on the safe upgrade to BOG5. So, can I simply flash this new firmware to directly upgrade to BPA1, or do I need to downgrade my firmware to some other version first?
Thanks again.
Click to expand...
Click to collapse
Just follow the instructions from any previous Safe Upgrade or KK!
nh97103 said:
Fantastic work, and I thank you very much. With that said:
I'm really curious how a safe upgrade works. I was under the impression that any tampering of the official file (without root/an unlocked bootloader) would cause it to fail/trip the unofficial firmware message, which is why you can't simply put root into the file and flash it. How did you find a way around this?
Click to expand...
Click to collapse
Safe Upgrade includes official IMGs signed by Samsung, but it's diffrent from their official Full Firmware that increments the bootloader and prevents downgradeability to previous differently-incremented versions. Rooted IMGs fail in signature verification.
Just flashed it for my retail Note 4. Worked flawlessly. Thanks again!
Can this be dirty flashed, or should my phone be wiped? Coming from KK.
usmaak said:
Can this be dirty flashed, or should my phone be wiped? Coming from KK.
Click to expand...
Click to collapse
I dirty flashed from the first 5.0.1 update. No problems yet, but it's always recommended to wipe. Coming from Kitkat might be a little different, too.
In other news, 5.1.1 is noticeably smoother. Big difference.
I'm on the retail Note 4, still on 4.4.4 ANI1. Do I put the N910VVRU1BOAF_Bootloaders.tar.md5 file in BL section in Odin?
Been patiently waiting for this. Thanks for all your hard work hsbadr!
burntrat said:
I'm on the retail Note 4, still on 4.4.4 ANI1. Do I put the N910VVRU1BOAF_Bootloaders.tar.md5 file in BL section in Odin?
Click to expand...
Click to collapse
No put it in the AP/PDA
can i rollback ( twrp ) to BOG5??
not so fantastic - I am in bootloops. I was on BOG5 Jazmine ROM 3.1, upgraded to BAP1, and bootloops. Trying to recover T2 / A2 still, but we shall see - stand by...
I have Dev Edition and got a |tz|Fused 2 > Binary 1. Tried flashing the BOG5 version back but same thing. Does anyone know how to get the phone back to operational and not lock the bootloader?
anticloud said:
can i rollback ( twrp ) to BOG5??
Click to expand...
Click to collapse
anticloud said:
not so fantastic - I am in bootloops. I was on BOG5 Jazmine ROM 3.1, upgraded to BAP1, and bootloops. Trying to recover T2 / A2 still, but we shall see - stand by...
Click to expand...
Click to collapse
ericthered5000 said:
I have Dev Edition and got a |tz|Fused 2 > Binary 1. Tried flashing the BOG5 version back but same thing. Does anyone know how to get the phone back to operational and not lock the bootloader?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
This is for the original DEs with KK or OAF bootloader. It won't work if you have incremented partitions (e.g., sent your DE to Samsung for repair and they updated the bootloader). So, you already won't be able to roll back to KK.
I'll create a sepecial version for you. What's your current bootloader version?
Yay, thank you so much hsbadr! I've been waiting patiently for this!
revision
hsbadr said:
This is for the original DEs with KK or OAF bootloader. It won't work if you have incremented partitions (e.g., sent your DE to Samsung for repair and they updated the bootloader). So, you already won't be able to roll back to KK.
I'll create a sepecial version for you. What's your current bootloader version?
Click to expand...
Click to collapse
hi hsbadr. thanks.
I am running swrev T2 and A2, the rest are *1 versions
is this the info you are looking for?
rob
anticloud said:
hi hsbadr. thanks.
I am running swrev T2 and A2, the rest are *1 versions
is this the info you are looking for?
Click to expand...
Click to collapse
This means you've incremented bootloader, but I'm asking about the bootloader version. Anyway, I remember that Samsung upgraded your bootloader to N910VVRU2BOG5. Check your PM!
hsbadr said:
This is for the original DEs with KK or OAF bootloader. It won't work if you have incremented partitions (e.g., sent your DE to Samsung for repair and they updated the bootloader). So, you already won't be able to roll back to KK.
I'll create a sepecial version for you. What's your current bootloader version?
Click to expand...
Click to collapse
Thank you! Is there a way to look without being able to boot into the bootloader? I have sent the phone back to Sammy to have it fixed once. When I got it back (around 10/20/2015) I followed radionerd's instruction here to hopefully prevent sending it back again. Maybe there's something in the backup I took that will tell me? Also, I'm not quite sure how to use the backup either.
Thanks @hsbadr the firmware is running flawlessly
Related
Here is an almost stock 1.29.651.10 ROM, both Odex and Deodex, based on my Sprint One system dump (I RUU'd, took ota, HTCDev unlocked, TWRP, dd'd /system). I flashed both and everything appears to work fine. If anyone finds an issue, I will correct it and re-upload. You can flash this right after you flash TWRP (read below), as this has root and system write protection already disabled (read here).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DEVS - Feel free to use this as a base! All I ask is for credit in your ROM thread, thanks
Changes from "Out of the Box"
Modified boot.img to be insecure, enabled debugging, busybox run-parts
Latest busybox
Updated wp_mod.ko for new kernel from flar2 for /system rw - disabled system write protection via ramdisk
SuperSU and associated files
Re-added apps that were erased by HTCdev unlock (in /data/preload)
Removed otacerts so you can't get an OTA that will mess up your phone
DEODEX ONLY - Deodex all apps
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Requirements
Download and flash TWRP
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads
I would recommend a FULL WIPE (including /data) coming from the previous base. I do it, doesn't mean you have to, but I would.
5.17.16 - Deodex - Odex
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credits
Chainfire for SuperSU
Dees_Troy for making TWRP recovery for Sprint One
flar2 for the original wp_mod.ko
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Info
Changelog
5.17.13 - Fixed mysteriously missing Superuser.apk
5.16.13 - Initial Release
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Old Downloads
5.16.16 - Deodex - Odex
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Known Issues
None
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Before release, I tested paid apps and system write protection. Both are working on both odex and deodex builds. Please let me know if you encounter any issues
downloading now, Thanks Viper
Thanks again, Viper!
Would downloading the odex version of this and flashing over stock rooted be the best way to get the OTA updates, without having to set our apps gmail, etc. up again, or will there be a recovery flashable .zip in your opinion, that will do the trick?
I'd like to stay stock as long as possible so I can better support my clients on stock.
jcwxguy said:
downloading now, Thanks Viper
Click to expand...
Click to collapse
Welcome I'm away for the day and didn't figure I'd be on my laptop much, and of course this happens. Well, I left my charge at home figuring I wouldn't need it and my laptop is almost dead lol time to "rent" a charger from Best Buy for the day! lol
Be back in a bit to work on getting viperROM rebased
jaytv said:
Thanks again, Viper!
Would downloading the odex version of this and flashing over stock rooted be the best way to get the OTA updates, without having to set our apps gmail, etc. up again, or will there be a recovery flashable .zip in your opinion, that will do the trick?
I'd like to stay stock as long as possible so I can better support my clients on stock.
Click to expand...
Click to collapse
This is a flashable .zip for recovery. You could dirty flash, but I never do. I use Titanium Backup to backup everything, full wipe, flash new base, set up accounts again, restore apps and data.
Yes, thanks, I know that is the preferred method. I guess I am just looking for a flashable .zip of the the OTA that will just update the stock with the new files, so that it still shows stock in about phone, etc. and is as close to stock as possible while rooted and able to add most of the goodies...LOL.
I guess I should just flash the new base using TiB as you said, and let my staying with rooted Sprint Stock obsession go...I mean, I've already installed MoDaCo to get rid of the darned menu bar!
Thanks again for all your hard work and patient answers...When my clients finally pay me for last month's work, I'll be sending a beer or two your way!
So wiping and flashing this is equivalent to taking the ota??? Or is ruu than take ota than root again than flash the way to do it???? I just wanna go the best possible way. Thanks
Sent from my HTCONE using xda premium
jaytv said:
Yes, thanks, I know that is the preferred method. I guess I am just looking for a flashable .zip of the the OTA that will just update the stock with the new files, so that it still shows stock in about phone, etc. and is as close to stock as possible while rooted and able to add most of the goodies...LOL.
I guess I should just flash the new base using TiB as you said, and let my staying with rooted Sprint Stock obsession go...I mean, I've already installed MoDaCo to get rid of the darned menu bar!
Thanks again for all your hard work and patient answers...When my clients finally pay me for last month's work, I'll be sending a beer or two your way!
Click to expand...
Click to collapse
I see what you're asking. The issue there is that it shows every apk and framework file is different from the last base because the version numbers were bumped. I'm not going to go through almost 300 files to see if it was just the version numbers that changed if you dirty flash this (no /data wipe), that would be like taking the OTA but I can't promise that it will work properly.
dandan2980 said:
So wiping and flashing this is equivalent to taking the ota??? Or is ruu than take ota than root again than flash the way to do it???? I just wanna go the best possible way. Thanks
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Don't RUU and then flash this, that's a waste of time. Read what I said above, it should help you as well.
-viperboy- said:
Read what I said above, it should help you as well.
Click to expand...
Click to collapse
any idea what rcdata.img is from the ota update?
-viperboy- said:
I see what you're asking. The issue there is that it shows every apk and framework file is different from the last base because the version numbers were bumped. I'm not going to go through almost 300 files to see if it was just the version numbers that changed if you dirty flash this (no /data wipe), that would be like taking the OTA but I can't promise that it will work properly.
Don't RUU and then flash this, that's a waste of time. Read what I said above, it should help you as well.
Click to expand...
Click to collapse
I really should just take the plunge and install ViperRom. I understand the battery life is amazing, among so many other things. I'll wait till you have the new base in, and flash. Actually, getting excited, and can hardly wait, and no, that is not any kind of an ETA question, LOL! I hate those too!
jcwxguy said:
any idea what rcdata.img is from the ota update?
Click to expand...
Click to collapse
PRI/NV stuff.
jaytv said:
I really should just take the plunge and install ViperRom. I understand the battery life is amazing, among so many other things. I'll wait till you have the new base in, and flash. Actually, getting excited, and can hardly wait, and no, that is not any kind of an ETA question, LOL! I hate those too!
Click to expand...
Click to collapse
Thanks lol working on it as we speak.
I would recommend a FULL WIPE (including /data) coming from the previous base. I do it, doesn't mean you have to, but I would.
Click to expand...
Click to collapse
Just out of curiosity, what is the order you're recommending here? Are you meaning wipe System, flash, wipe data or wip data, wipe system, mount, move ROM over PC, then flash it? I'm not quite sure what is the order of everything you're recommending.
Also, I had flashed CM10 to try it out and it borked my file structure. Will this cleaning fix that issue?
rougegoat said:
Just out of curiosity, what is the order you're recommending here? Are you meaning wipe System, flash, wipe data or wip data, wipe system, mount, move ROM over PC, then flash it? I'm not quite sure what is the order of everything you're recommending.
Also, I had flashed CM10 to try it out and it borked my file structure. Will this cleaning fix that issue?
Click to expand...
Click to collapse
Wipe cache, dalvik, data, and system and then flash the ROM.
I'm guessing not...was there baseband or kernel updated?
boomerod said:
I'm guessing not...was there baseband or kernel updated?
Click to expand...
Click to collapse
Kernel was updated, baseband I'm not sure. I did the RUU and then the OTA, so it would have flashed any firmware (stock ROMs intentionally do not touch firmware) but mine says 1.00.20.0315 for baseband.
-viperboy- said:
Kernel was updated, baseband I'm not sure. I did the RUU and then the OTA, so it would have flashed any firmware (stock ROMs intentionally do not touch firmware) but mine says 1.00.20.0315 for baseband.
Click to expand...
Click to collapse
Mine is same as yours, so appears no baseband update. Thanks, bro. Appreciate your work too!
-viperboy- said:
Kernel was updated, baseband I'm not sure. I did the RUU and then the OTA, so it would have flashed any firmware (stock ROMs intentionally do not touch firmware) but mine says 1.00.20.0315 for baseband.
Click to expand...
Click to collapse
No baseband update. Could you outline what files were removed for ota certs?
Sent From My HTC One, On The Now Network From Sprint!
Rydah805 said:
No baseband update. Could you outline what files were removed for ota certs?
Sent From My HTC One, On The Now Network From Sprint!
Click to expand...
Click to collapse
/system/etc/security/otacerts.zip
Hello guys, here i present you the stock droid maxx debloated of all garbage apk's
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did not modify any system files, just erased the verizon bloatware.
Everything works and has the same problems that stock has. (if Any)
Benefits:
Clean install as it should be
Bloatfree - Nexus Like
Faster Performance (no system apps running on background)
Everything Works (Active Display, Touchless Control, Nfc, etc)
No Annoying Verizon or Amazon Apps
This works with Droid Maxx, Droid Ultra And Droid Mini
Changelist:
Removed Wireless Charging Sound
Removed Ingress
Removed All apps Begging with VZW
Removed Hotspot Launcher
Removed all apps Beggining with Amazon
Removed NFL GAME
Removed Demo Mode
Removed Kindle App
Removed Myverizon app
Removed Vcast tone app
Removed all VZW apps
Removed VVM
Removed ECID (call id)
Removed internal folder motodemo
Removed xt926 Video from folder ETC
Removed Backup Assistant
Removed Folder of videos KnowYourDevice
For Comparison Purpouses The Original Stock Rom was 850Mb
This Debloated version its 611Mb
Thats 239Mb of Bloatware Removed, 28% of the system weight.
Current Version: 21.11.21 (4.4.4)
Download:
https://mega.co.nz/#!5UcWgSSI!F-irfuTp3k5Ch9Q_tPcChd8KZpTU8j6pB5YeiuKZPLI
(To download From Mega From your Phone Without Mega App, Select Enable Desktop Version on Google Chrome)
WARNING DONT INSTALL THIS ROM IF YOU ARE USING SLIMKAT OR CM11 ROMS
FLASH STOCK AND THEN INSTALL THIS ROM OR YOU'LL HAVE GRAPHICAL AND BOOT ISSUES
Older Version:
19.6.3 (4.4 white status bar)
https://drive.google.com/file/d/0BxMt2eBCKvP6a0FqYURTLS1fUzA/edit?usp=sharing
im not asking you for money but if you have $1.00 spare on paypal, i can always take it,click on donate to me, thanks for the support! if this was useful to you, press thanks, its free!
if this was useful to you, press thanks, its free!
Click to expand...
Click to collapse
Oh.. Sure my friend, happy to be the first man, but may not try it now.. I will just download it and use it once needed, as I have already debloated those apps...
Any chance this might be doable for the Droid Mini? I'm assuming (yeah, I know) that if done it would be flashable on a current Mini with 4.4 (locked bootloader/unrooted) since it's still considered a "stock" 4.4. ROM?
Since the Mini only has 16GB (about 11GB usable at best) every little bit helps...
br0adband said:
Any chance this might be doable for the Droid Mini? I'm assuming (yeah, I know) that if done it would be flashable on a current Mini with 4.4 (locked bootloader/unrooted) since it's still considered a "stock" 4.4. ROM?
Since the Mini only has 16GB (about 11GB usable at best) every little bit helps...
Click to expand...
Click to collapse
How would you flash it with a locked bootloader and no root? You can't flash in stock recovery.
RSD Lite, perhaps? Honestly I didn't think about it at the time I made the post, having a "senior moment" I guess. Getting sick of flashing anything, actually.
br0adband said:
Any chance this might be doable for the Droid Mini? I'm assuming (yeah, I know) that if done it would be flashable on a current Mini with 4.4 (locked bootloader/unrooted) since it's still considered a "stock" 4.4. ROM?
Since the Mini only has 16GB (about 11GB usable at best) every little bit helps...
Click to expand...
Click to collapse
this is intended to flash it on custom recovery with obvious rooted and unlocked bootloader, not on rsd lite.
i really wish you can flash it on a locked device.
Jaocagomez, are you using this ROM now? How much is the storage used by AndroidOS in "Settings->Storage". My phone is using 6.52GB, even its de-bloated (So I have converted many apps to system app to use the FREE debloated space). If yours is showing less usage (it must be) and you are NOT having any issues (even using as daily driver), then its one of the best stock based ROMs available here, imho.
Thanks...
br0adband said:
Any chance this might be doable for the Droid Mini? I'm assuming (yeah, I know) that if done it would be flashable on a current Mini with 4.4 (locked bootloader/unrooted) since it's still considered a "stock" 4.4. ROM?
Since the Mini only has 16GB (about 11GB usable at best) every little bit helps...
Click to expand...
Click to collapse
My friend, its a stock based ROM and not a "stock" 4.4 ROM
kanagadeepan said:
Jaocagomez, are you using this ROM now? How much is the storage used by AndroidOS in "Settings->Storage". My phone is using 6.52GB, even its de-bloated (So I have converted many apps to system app to use the FREE debloated space). If yours is showing less usage (it must be) and you are NOT having any issues (even using as daily driver), then its one of the best stock based ROMs available here, imho.
Thanks...My friend, its a stock based ROM and not a "stock" 4.4 ROM
Click to expand...
Click to collapse
The system partition is what it is. You can't adjust that. The 6.52GB is the same across all stock roms.
Dear akellar, Thanks for the info...
@ OP
Whether OTA is blocked in this ROM? I mean sir, have you removed MotorolaOTA or one such app too? As OTA will fail in this ROM right?
Thanks for this ROM, as it will save lots of time debloating, when we have to flash a stock 4.4 ROM.
kanagadeepan said:
Jaocagomez, are you using this ROM now? How much is the storage used by AndroidOS in "Settings->Storage". My phone is using 6.52GB, even its de-bloated (So I have converted many apps to system app to use the FREE debloated space). If yours is showing less usage (it must be) and you are NOT having any issues (even using as daily driver), then its one of the best stock based ROMs available here, imho.
Thanks...My friend, its a stock based ROM and not a "stock" 4.4 ROM
Click to expand...
Click to collapse
yes i use it dialy, its stock rom, i just decompiled removed apps and compiled again.
akellar said:
The system partition is what it is. You can't adjust that. The 6.52GB is the same across all stock roms.
Click to expand...
Click to collapse
yes, the sistem partition its the same
kanagadeepan said:
Dear akellar, Thanks for the info...
@ OP
Whether OTA is blocked in this ROM? I mean sir, have you removed MotorolaOTA or one such app too? As OTA will fail in this ROM right?
Thanks for this ROM, as it will save lots of time debloating, when we have to flash a stock 4.4 ROM.
Click to expand...
Click to collapse
i didnt remove motorolaOTA from the apk's but i think it wouldnt work. if a new android version comes out i'll just debloat it as i already have everything setted up.
A system update will fail using this because it is debloated you will have to fxz to get the bloat back and take update
^^^^
Yes. To get OTA, we have to return to stock using rsdlite. and get ota.
Though OTA installation will fail, there is a chance to download the OTA, if we are less careful - which may lead to consumption of data. Thats why I have asked so.
May I request OP to remove MotorolaOTA apk files too in the next iteration (say for 4.4.2 or 4.4.3 in future), if its not going to be a tedious job. Hats off to you sir for your nice efforts. Sorry, if I said anything wrong or asked too much...
kanagadeepan said:
^^^^
Yes. To get OTA, we have to return to stock using rsdlite. and get ota.
Though OTA installation will fail, there is a chance to download the OTA, if we are less careful - which may lead to consumption of data. Thats why I have asked so.
May I request OP to remove MotorolaOTA apk files too in the next iteration (say for 4.4.2 or 4.4.3 in future), if its not going to be a tedious job. Hats off to you sir for your nice efforts. Sorry, if I said anything wrong or asked too much...
Click to expand...
Click to collapse
Just delete the apk yourself. Not hard at all.
Sent from my XT1080 using xda app-developers app
Sorry for the noob sounding question, but what recovery would you recommend for this almost stock rom?
I have tried CWM - 6.26.6~ which was modified by another dev -
but it would not load this rom just got stuck in a boot loop -
did work with Cyanogen so not sure what the difference was, but they do not have a stable build for my
Moto Maxx Dev edition -
Any better suggestions for the recovery?
Thanks,
I am looking forward to a debloated 4.4 rom -
LTE said:
Sorry for the noob sounding question, but what recovery would you recommend for this almost stock rom?
I have tried CWM - 6.26.6~ which was modified by another dev -
but it would not load this rom just got stuck in a boot loop -
did work with Cyanogen so not sure what the difference was, but they do not have a stable build for my
Moto Maxx Dev edition -
Any better suggestions for the recovery?
Thanks,
I am looking forward to a debloated 4.4 rom -
Click to expand...
Click to collapse
your best shot its TWRP, its on my signature.
Jaocagomez said:
your best shot its TWRP, its on my signature.
Click to expand...
Click to collapse
Awesome - worked like a charm! Thanks
Can anyone upload the file none of the links work for me
Sent from my unknown using XDA Premium 4 mobile app
Is there anyway to disable the system update notification? I obviously can't take the OTA since I'm debloated.
notjaykay said:
Is there anyway to disable the system update notification? I obviously can't take the OTA since I'm debloated.
Click to expand...
Click to collapse
Use TiB to freeze the app MotorolaOTA.
Sent From Droid Ultra
If I helped you, consider hitting thanks.
notjaykay said:
Is there anyway to disable the system update notification? I obviously can't take the OTA since I'm debloated.
Click to expand...
Click to collapse
not that i know, sorry.
----
Hello guys, im currently working on the debloated 19.6.3 but i need two things first:
a reliable place to upload it and...
people willing to test the most recent build without fear of experiencing some bug
RELAX!!!
Now I think they're releasing this update just to mess with us. Go to About Phone and check for updates. I haven't installed it yet, but most likely a patch for Heartbleed, or something.
Enjoy? :silly:
Source: http://www.androidpolice.com/2014/0...ements-still-languishing-on-jelly-bean-4-1-1/
quasihellfish said:
RELAX!!!
Now I think they're releasing this update just to mess with us. Go to About Phone and check for updates. I haven't installed it yet, but most likely a patch for Heartbleed, or something.
Enjoy? :silly:
Source: http://www.androidpolice.com/2014/0...ements-still-languishing-on-jelly-bean-4-1-1/
Click to expand...
Click to collapse
Unlocked bootloader patch as well as a heartbleed fix is my guess.....forgot to charge before bed last night and I only have 43% battery....Once I'm charged, I'll flash back to stock and I'll upload this new OTA for us all. Give me about 3 hours......luckily it's a rainy day and I don't have crap to do.
skeevydude said:
Unlocked bootloader patch..
Click to expand...
Click to collapse
Meaning, they're trying to re-lock the bootloader? That would be disappointing.
quasihellfish said:
Meaning, they're trying to re-lock the bootloader? That would be disappointing.
Click to expand...
Click to collapse
Probably just trying to prevent others from unlocking; like what the last Verizon JB OTA did to the XT926.
BUT
There's speculation on the RHD forums that the kernel used in the XT926 OTA will able to be used in unlocking the bootloader. Only time will tell, but that's good news at any rate.
now at 82% charge....
In any case i think this are good news, maybe the kitkat update its not that far away... update installed
---------- Post added at 11:58 AM ---------- Previous post was at 11:50 AM ----------
i noticed that my phone cant stop rebooting with this update. It asks me to install untrusted zip and i say yes but it reboots again. maybe its the CWM recovery?
matiamb said:
In any case i think this are good news, maybe the kitkat update its not that far away... update installed
---------- Post added at 11:58 AM ---------- Previous post was at 11:50 AM ----------
i noticed that my phone cant stop rebooting with this update. It asks me to install untrusted zip and i say yes but it reboots again. maybe its the CWM recovery?
Click to expand...
Click to collapse
It (CWM) wouldn't surprise me that much. I'm running my backups right now and once done I'm flashing back to pure stock....no CWM or anything...
skeevydude said:
It (CWM) wouldn't surprise me that much. I'm running my backups right now and once done I'm flashing back to pure stock....no CWM or anything...
Click to expand...
Click to collapse
Yeah im gonna do the same thing later today. NO CUSTOM RECOVERY GUYS
matiamb said:
Yeah im gonna do the same thing later today. NO CUSTOM RECOVERY GUYS
Click to expand...
Click to collapse
Don't jump the gun just yet....it might only need that annoying install-recovery.sh removed/renamed.
And this nandroid needs to hurry up....and I wonder if we're going to have a new kernel...
skeevydude said:
Don't jump the gun just yet....it might only need that annoying install-recovery.sh removed/renamed.
And this nandroid needs to hurry up....and I wonder if we're going to have a new kernel...
Click to expand...
Click to collapse
Lol! ok let us know! Its has been so long since the last update that im exited
matiamb said:
Lol! ok let us know! Its has been so long since the last update that im exited
Click to expand...
Click to collapse
I will, but it's going to take a bit longer than I planned on. Just got a call and I gotta run some errands for work. Not sure when I'll be done. Probably 3 to 5 hours. Pisses me off. I was looking forward to an update, even if it is only for AT&T JB.
That's not what I expected from ATT but at least, they dont forget our update. Hope that kitkat will come soon.
So.
Who got the update already?
Arjomer said:
Who got the update already?
Click to expand...
Click to collapse
I do. It's a whopping 6.2mb....gotta root and copy it. Should have it uploaded within the half hour.
EDIT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT2:
The OTA is attached below. About to flash it.
EDIT3:
Using the Settings>About Phone way, I updated it with Philz CWM installed and it's working just fine. Looks like it contains the heartbleed fix. a modem update, camera/various lib updates....Not sure why it's labeled Blur_Version.98.4.20.MB886.ATT.en.US.zip when it installs 98.5.38...though I'd have preferred a 4.20 version
EDIT4:
Forgot to mention. You HAVE to be running the latest stock AT&T firmware to install or even flash this. It won't work for any other Atrix HD JB rom, stock or custom.
skeevydude said:
I do. It's a whopping 6.2mb....gotta root and copy it. Should have it uploaded within the half hour.
EDIT:
EDIT2:
The OTA is attached below. About to flash it.
EDIT3:
Using the Settings>About Phone way, I updated it with Philz CWM installed and it's working just fine. Looks like it contains the heartbleed fix. a modem update, camera/various lib updates....Not sure why it's labeled Blur_Version.98.4.20.MB886.ATT.en.US.zip when it installs 98.5.38...though I'd have preferred a 4.20 version
EDIT4:
Forgot to mention. You HAVE to be running the latest stock AT&T firmware to install or even flash this. It won't work for any other Atrix HD JB rom, stock or custom.
Click to expand...
Click to collapse
Which version of Philz CWM are u using? im running 6.0.44 but its classic CWM
matiamb said:
Which version of Philz CWM are u using? im running 6.0.44 but its classic CWM
Click to expand...
Click to collapse
Whatever the newest one is that's available to download for moto-msm8960 common because that's what I flashed to get root and rip the OTA (I'm lazy dammit). It's over here at the RAZR HD threads.
Here are the detail of our update I suppose
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/91832
swapnil0545 said:
Here are the detail of our update I suppose
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/91832
Click to expand...
Click to collapse
I think it's for the existing 4.1.1 JB. The new update yesterday is 98.5.38.MB886.ATT.en.US at this link: https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/99457/p/30,6720,8558
skeevydude said:
It's a whopping 6.2mb....gotta root and copy it. Should have it uploaded within the half hour.
I updated it with Philz CWM installed and it's working just fine. Looks like it contains the heartbleed fix. a modem update, camera/various lib updates....Not sure why it's labeled Blur_Version.98.4.20.MB886.ATT.en.US.zip when it installs 98.5.38...though I'd have preferred a 4.20 version
Click to expand...
Click to collapse
For just 6mb, it sure does patch a hell of a lot of files and partitions.... It's a miracle nothing borked, considering you used Philz and all lol
P.S. You might be an xda old timer if you know who skeevy420 is!
progrockguy said:
For just 6mb, it sure does patch a hell of a lot of files and partitions.... It's a miracle nothing borked, considering you used Philz and all lol
P.S. You might be an xda old timer if you know who skeevy420 is!
Click to expand...
Click to collapse
That's kind of what I was thinking, but me using Philz to take the OTA lets me know that it does work as well as knowing that others shouldn't have a difficult time with it. Besides, if it did go bad I had a terminal open with all the fastboot commands ready to go...I was prepared for a soft brick.
skeevydude said:
I do. It's a whopping 6.2mb....gotta root and copy it. Should have it uploaded within the half hour.
EDIT:
EDIT2:
The OTA is attached below. About to flash it.
EDIT3:
Using the Settings>About Phone way, I updated it with Philz CWM installed and it's working just fine. Looks like it contains the heartbleed fix. a modem update, camera/various lib updates....Not sure why it's labeled Blur_Version.98.4.20.MB886.ATT.en.US.zip when it installs 98.5.38...though I'd have preferred a 4.20 version
EDIT4:
Forgot to mention. You HAVE to be running the latest stock AT&T firmware to install or even flash this. It won't work for any other Atrix HD JB rom, stock or custom.
Click to expand...
Click to collapse
Hey skeevydude should I download this update on my cellphone? I'm running jb 4.1.1 stock rooted. Will this unroot my phone?
Sent from my MB886 using Tapatalk
This is a patched Lollipop 5.0.1 update for Verizon Samsung Galaxy Note 4 Developer Edition. It upgrades the firmware using the official OTA updates:
N910VVRU1ANJ5 to N910VVRU1ANK5
N910VVRU1ANK5 to N910VVRU1BOAF
You can flash the 1st OTA only to stay on an updated KK 4.4.4 (NK5) if you depend on Xposed (more stable on KK) OR go to the end for LP 5.0.1 (OAF).
Devs: You can use this as a base for your ROMs, if you wish.
★ Disclaimer:THIS SERVICE IS FREE OF CHARGE, USE IT AT YOUR OWN RISK, TAKE IT OR LEAVE IT !
Installation Instructions:
Update: You can now odin this tar to update directly from KK to LP in a single step.
Flash N910VVRU1ANJ5_StockRestore.tar.md5 via Odin
Flash TWRP & reboot to recovery
Flash N910V_DevEd_NJ5-to-NK5.zip in TWRP & reboot to recovery
Flash N910V_DevEd_NK5-to-OAF.zip in TWRP & reboot to Download mode
Flash N910VVRU1BOAF_PartialFirmware_DevEd.tar.md5 via Odin
Reboot to recovery & flash UPDATE-SuperSU-v2.46.zip
Do a Factory Reset from within ROM (in Settings) & Enjoy
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Known Issues:
Screen brightness can't be adjusted (FIXED HERE)
Click to expand...
Click to collapse
Downloads:
N910VVRU1ANJ5 Stock Restore: N910VVRU1ANJ5_StockRestore.tar.md5.7z
md5: 5ad7ef8dca09fe45791698340dd9d987
N910VVRU1ANJ5 to N910VVRU1ANK5 OTA: N910V_DevEd_NJ5-to-NK5.zip
md5: 3a38828722cef013b846ef52e28ce8e8
N910VVRU1ANK5 to N910VVRU1BOAF OTA: N910V_DevEd_NK5-to-OAF.zip
md5: b4faa618c688f55ae28851861a7c73df
N910VVRU1BOAF Partial Firmware: N910VVRU1BOAF_PartialFirmware_DevEd.tar.md5.7z
md5: 46166a6d65846b03b7b667101ec6215f
Click to expand...
Click to collapse
Contributors:
@hsbadr
@Misterxtc
hsbadr said:
This is Odin-flashable patched Lollipop 5.0.1 N910VVRU1BOAF firmware update for Verizon Samsung Galaxy Note 4 Developer Edition.
Installation Instructions:
Downloads:
Contributors:
@hsbadr
@Misterxtc
Click to expand...
Click to collapse
Nice!
thank you sir
Still uploading? Thanks for this, can't wait to try.
anticloud said:
thank you sir
Click to expand...
Click to collapse
You're welcome!
bobbarker2 said:
Still uploading? Thanks for this, can't wait to try.
Click to expand...
Click to collapse
Uploaded. @Misterxtc is testing the final tar before we post the link.
U rock man! Thx
Thanks man. Once flashed, does the twrp Odin file still work?
Sent from my SM-N910V using Tapatalk
Thank you.
jbombs16 said:
Thanks man. Once flashed, does the twrp Odin file still work?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
It should. Nothings changed there. Ur still flashing an img to a partition. But I'm not 100% sure.
Thank you very much, i really appreciate it.
You shouldn't have to flash the NJ5 firmware and TWRP if you already have them right?
stueycaster said:
You shouldn't have to flash the NJ5 firmware and TWRP if you already have them right?
Click to expand...
Click to collapse
I think the reason for the stockrestore is to make sure you are flashing on top of unmodified system files.
---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------
Followed the instructions to the letter, booting up now. Looking good! But oh god that stock DPI..
bobbarker2 said:
I think the reason for the stockrestore is to make sure you are flashing on top of unmodified system files.
Click to expand...
Click to collapse
I always wipe internal storage before I flash. Isn't that a better solution?
Update: Ok I'll follow the directions.
Wow, OTA on Thursday, DE upgrade process on Sunday. Thank you for your hard and quick work!
Unfortunately i followed the steps right but when i go to factory reset it says failed then reboots. also when it does, i cant turn the screen brightness down at all. im trying another factory reset and see what happens. hopefully this is a minor glitch and not something that everyone will go through.
csstamatin said:
Unfortunately i followed the steps right but when i go to factory reset it says failed then reboots. also when it does, i cant turn the screen brightness down at all. im trying another factory reset and see what happens. hopefully this is a minor glitch and not something that everyone will go through.
Click to expand...
Click to collapse
I did factory reset and booted up. But I can't turn down brightness either.
bobbarker2 said:
I did factory reset and booted up. But I can't turn down brightness either.
Click to expand...
Click to collapse
likewise
Blackiisky said:
likewise
Click to expand...
Click to collapse
Hell kinda glad I'm not the only one that means I didn't mess up. but it does mean we will have to wait longer which I don't care about.
csstamatin said:
Hell kinda glad I'm not the only one that means I didn't mess up. but it does mean we will have to wait longer which I don't care about.
Click to expand...
Click to collapse
Same thing here. It might be a bug in lollipop or it could just be the update. Hopefully it's fixed when the Odin tar is out but this is good for now. Things are running smoother for me.
Install a power toggles type app and see if that can turn it down. Please let us know if it helps. I'm staying on AICP if the brightness can't be adjusted.
Hello if you own an LG G Pad 7.0 v400 and for some reason you didn't get an lollipop update or you coming back from a x ROM and want to flash
lollipop immediately instead of downgrading to KK and then updating it I have a KDZ for you.
*Due to locked bootloader on 5.0.2 you can only root it, flashing custom recovery will brick your device.
Click to expand...
Click to collapse
** If your tablet falls into bootloop after downgrading to lollipop or going back to stock (Kitkat/Lollipop) from a custom ROM, it will fall into bootloop. Don't worry, all you have to do is just to perform a factory reset.
Click to expand...
Click to collapse
Version:
V40020B - Lollipop 5.0.2
Downloads:
LG Driver for windows
V40020B_00 - Google drive
V40020B_00 - AndroidFileHost
md5: 3222c3582a12dc59e411853e0a150a15
LGFlashTool2014
Click to expand...
Click to collapse
INSTALLATION:
1. Download and extract zip file, inside it you should find a V40020b_00.kdz file
2. Boot your tablet into a download mode
3. Now we need to open a LG Flash Tool...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. In the first box, "select type" you need to select the 3GQCT option.
5. In "phone mode" select "emergency"
6. Now click on the little folder to choose your file
7. Navigate to your file location, select it and press open
8. Now just click on "Normal Flash"
9. Now on your screen should pop up the window where you select the country and language. You don't need to care about it,
language will automatically change to english.
10. LG Support Tool window should pop up
11. You would probably get an software update error but again you do not need to care about it.
Just press ok.
12. As you see on the picture do not unplug your tablet! It is upgrading just now! You'll see files flashing into your tablet and progress bar going further and further.
13. DO NOT close the window until your tablet reboots.
14. Perform a factory reset and enjoy Android LOLLIPOP
Is there any way to use TWRP recovery on it? I've tried with no result, the same as flashing without recovery (with FlashFire).
Hammerhand.17 said:
Is there any way to use TWRP recovery on it? I've tried with no result, the same as flashing without recovery (with FlashFire).
Click to expand...
Click to collapse
No, you need to extract the zip file. Inside it you've got a normal kdz which you can easily flash using LG Flash Tool 2014
Thank you. I meant if there were any way to install TWRP that I unknow. Hope somebody updates TWRP to use it in Lollipop.
Hammerhand.17 said:
Thank you. I meant if there were any way to install TWRP that I unknow. Hope somebody updates TWRP to use it in Lollipop.
Click to expand...
Click to collapse
Actually it might be due to locked bootloader on 5.0.2, tried flash something via Flashfire but it says it cannot overwrite anything over existing data, or simply just says flashing was successful and boots LG's soft..
Maybe we could make something in the future. I'll keep trying and thinking.
Thank you for your work
Just to be clear I have some questions :
1 - Will I be able to flash KitKat KDZ over any ROM via this guide? (Can I downgrade from Lollipop?)
2 - This should help me after downgrading to root then install TWRP and then basically any ROM I need.. right?
3 - I heard about some devices (v410 specifically) when downgrading.. It makes the internal storage only 4 GB.. Do we have this issue on any of our KDZ on v400?
4 - and only two last questions that are unrelated to the topic (sorry)
Does this tablet support OTG?
And when installing CM12.1 can I have OTG (if supported) and IR working?
Thanks again for your time.. Have fun making our LG tablets better
Kindly press thanks if I helped
Dr.TheMaster said:
Thank you for your work
Just to be clear I have some questions :
1 - Will I be able to flash KitKat KDZ over any ROM via this guide? (Can I downgrade from Lollipop?)
2 - This should help me after downgrading to root then install TWRP and then basically any ROM I need.. right?
3 - I heard about some devices (v410 specifically) when downgrading.. It makes the internal storage only 4 GB.. Do we have this issue on any of our KDZ on v400?
4 - and only two last questions that are unrelated to the topic (sorry)
Does this tablet support OTG?
And when installing CM12.1 can I have OTG (if supported) and IR working?
Thanks again for your time.. Have fun making our LG tablets better
Kindly press thanks if I helped
Click to expand...
Click to collapse
1 - Yes you can, when I was making this guide I was downgrading to the stock 5.0.2 (the one in the guide) from cm13 android 6.0.1. When you downgrade it to either KitKat or Lollipop (KDZ) from any ROM it will bootloop, you need to factory reset it manually and you're ready to go! It is the same for downgrading it from this 5.0.2 kdz to Kitkat. If you anyway want to downgrade it straight to KitKat just use V40010c kdz instead, it is available from a while..
2 - Unfortunately Lollipop 5.0.2 in this device has a locked bootloader what means you can't do anything, anything except root (same method as on 4.4.2 confirmed working) but that's basically all. If you want to flash the ROM as I do you have to downgrade it straight to KitKat, root it, flash recovery via app like flashify ( for some reason it does not support fastboot ) and then flash the ROM.
3 - I'm not actually sure what you mean but in this tablet (doesn't matter what ROM or firmware you're running) you'll always have 4GB of memory for your usage. partition is divided into two: 4GB of memory for you and 4GB is taken by the system. I'm pretty sure cyanogenmod needs less space but I never tried messing up with my tablets data partition. I think it is possible though but I just don't recommend it, high risk of literally breaking your tablet. I tried to extend data partition on RemixOS, I did something wrong and it never boot up. Tablet is not a memory stick, you can't just format everything.
4 - Yes, it does support OTG, confirmed working on firmware 5.0.2, CM12.1 snapshot, EuphoriaOS and CM13. Doesn't work in the recovery. And about IR blaster - Simply no, cm and other ROMs are almost stock android that doesn't even know what IR blaster is and any LG APP cannot be installed on different source code than their's.
Thank you so much for your explanation.. When I meant 4 GB.. I mean 2 or even less available for user.. The default in this device is 8 GB.. 4 GB for user.. But it seems like there's definitely no issue at all when installing ROMs and moving between them.. Thanks again..
Kindly press thanks if I helped
Dr.TheMaster said:
Thank you so much for your explanation.. When I meant 4 GB.. I mean 2 or even less available for user.. The default in this device is 8 GB.. 4 GB for user.. But it seems like there's definitely no issue at all when installing ROMs and moving between them.. Thanks again..
Kindly press thanks if I helped
Click to expand...
Click to collapse
I flashed ROMs and reflashed firmware about 70 times altogether and never got that issue.. Kinda weird...
Adam Myczkowski said:
I flashed ROMs and reflashed firmware about 70 times altogether and never got that issue.. Kinda weird...
Click to expand...
Click to collapse
Yeah it happens with v410 devices (LTE)
That's why I asked about this device
Kindly press thanks if I helped
a small question
V40010c_00.kdz is KitKat
V40020B is Lilliopop
right? thanks @Adam Myczkowski
Dr.TheMaster said:
a small question
V40010c_00.kdz is KitKat
V40020B is Lilliopop
right? thanks @Adam Myczkowski
Click to expand...
Click to collapse
Yes you're right
hello brother, apology writing I'm using google translator, I followed your videos on youtube and all, I have a lg v400 Gpad 7.0 5.0.2 android version of the software and my v40020b ... this update is really bad because games are super slow especially Asphalt 8 ..... I want to install cm12.1 or 13, I have my tablet rooteada, to install TWRP 2.8.5.0 with flashify did all your procedures and reboot I get:
error: verify certification boot
and restarts and me back to the home screen .... I'm talking from peru .... greetings for your great work ......
how could return to kikkat I think that in this version the games were more fluid ..... I have searched and can not find the KDZ besides I could not even make a backup because I can not install the TWRP ..... if that tutorial it works to return to kitkak you would be obliged ....... goodnight ....
edwinperu said:
hello brother, apology writing I'm using google translator, I followed your videos on youtube and all, I have a lg v400 Gpad 7.0 5.0.2 android version of the software and my v40020b ... this update is really bad because games are super slow especially Asphalt 8 ..... I want to install cm12.1 or 13, I have my tablet rooteada, to install TWRP 2.8.5.0 with flashify did all your procedures and reboot I get:
error: verify certification boot
and restarts and me back to the home screen .... I'm talking from peru .... greetings for your great work ......
how could return to kikkat I think that in this version the games were more fluid ..... I have searched and can not find the KDZ besides I could not even make a backup because I can not install the TWRP ..... if that tutorial it works to return to kitkak you would be obliged ....... goodnight ....
Click to expand...
Click to collapse
I think you didn't my video's description properly, 5.0.2 has locked bootloader so you have to return to kitkat to flash the recovery. You can revert to kitkat by following this tutorial with the exception of using this kdz file: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW975106432109876543213/V40010c_00.kdz
Adam Myczkowski said:
I think you didn't my video's description properly, 5.0.2 has locked bootloader so you have to return to kitkat to flash the recovery. You can revert to kitkat by following this tutorial with the exception of using this kdz file: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW975106432109876543213/V40010c_00.kdz
Click to expand...
Click to collapse
Hey bro, I have a LG G Pad running official 5.0.2 firmware with a software version V40020b do you know where do I find this KDZ?
This link you have posted doesn't work anymore... Thanks.
PaideLis said:
Hey bro, I have a LG G Pad running official 5.0.2 firmware with a software version V40020b do you know where do I find this KDZ?
This link you have posted doesn't work anymore... Thanks.
Click to expand...
Click to collapse
Which kdz? 5.0.2 or 4.4.2? For 5.0.2 use Androidfileshost link from first post, for 4.4.2 use the link from the post you have quoted. It does work, download starts automaticly
Adam Myczkowski said:
Which kdz? 5.0.2 or 4.4.2? For 5.0.2 use Androidfileshost link from first post, for 4.4.2 use the link from the post you have quoted. It does work, download starts automaticly
Click to expand...
Click to collapse
Thanks man, I don't know why my Google Chrome shows a blank page and don't start download so I used a download manager and it's downloading.
Last question, can I use this KDZ (4.4.2 V40010c) on my tablet (V40020b)?
PaideLis said:
Thanks man, I don't know why my Google Chrome shows a blank page and don't start download so I used a download manager and it's downloading.
Last question, can I use this KDZ (4.4.2 V40010c) on my tablet (V40020b)?
Click to expand...
Click to collapse
Yes, if you want to flash custom ROMs. KitKat bootloader is a must
Adam Myczkowski said:
Yes, if you want to flash custom ROMs. KitKat bootloader is a must
Click to expand...
Click to collapse
Now I swear that's really the last question :laugh:
My tablet will stay in portuguese using the V40010c? Because it's a Brazilian version and I'm brazilian.
PaideLis said:
Now I swear that's really the last question :laugh:
My tablet will stay in portuguese using the V40010c? Because it's a Brazilian version and I'm brazilian.
Click to expand...
Click to collapse
English is default but you can change it to any language, not a problem