Hello.
I'm opening this thread because my Diamond seems to be diying and I wanted to know if someone got an idea.
Yesterday, my phone suddendly rebooted without warning after a month.
I thought It was nothing, but the phone started to reboot allthe time. The phone boot, show my operator logo (befor the winmo loading screen), and then reboot again, again and again.
I decided to do a little Mtty maintenance and reflash (from internal memory). The phone reworked for a couple of hours and restarted to do a reboot loop. I thought the rom I was using was in fault.
Re Mtty maintenant and flashing the phone with mu Prange stock rom. Several hours léter, the phone restarted to boot.
So where I am ?
If I let the phone off (like a night), he will launch windows and will works between a couple of minutes from a couple of hours befoor rebooting. If I put the phone in bootloader mode It won't reboot and will wait with his beautiful rainbow screen. But if I leav the bootloader mode, reboot over reboot, yay !
When the phonedecide to boot completly,it's a regular soft reset, not a hard reset.
Did anyone here have an idea ? Thanks !
How often did you flash since you have your diamond ?
Try to reflash a radio. Maybe your flash memory is dead =/
It sounds like the rom image might be corrupted - I had this problem with a 28003 rom I tried in which the phone would take a hard reset - boot fine - reset and reload fine... and then whenever you tried to restart it after that it went into a boot loop that eventually came up with a screen saying "the phone cannot boot because of uncertified software or incorrect shutdown procedure"
I solved it by putting the phone into bootloader (switch on holding both power key and volume down key) - connecting it to my computer and reflashing it. It DOES NOT need a activesync connection in this mode but you do need the Hard-SPL on the phone (im running olinex 1.40)
hope that helps
Jemma
Thx JoOos and Jemmauk.
But I already tried to reflash the Radio and the rom Image.
I Tried 3 different Rom images.
One orange official , aztor re-evo and an another one.
But the phone don't display any errors. It will just never stop to reboot without saying a thing.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methords and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Possible Fix?
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
DHASSIJA7 said:
Hi ,
I am new on this forum so sorry moderators if i have posted this where i shouldn't have . I recently got a ZTE NUBIA Z9 Mini and i wanted to root it so tried different methods and somehow i managed to soft brick it or as they say its in a bootloop. Whenever i try to boot the phone with volume up button + power button just the home screen nubia logo appears and it stays there. I am absolutely clueless what to do ... followed some youtube videos to flash new rom using fastboot but apparently it needs back up files which i don't have .
Someone please help me
Thanks !
Click to expand...
Click to collapse
tre251 said:
Hey have you tried to boot to recovery? it can depend where you brought it from. I got mine directly from the nubia store on thier website and it came rooted with a recovery system already in place, i had the same issue as you I booted into recovery power+vol down downloaded the rom again or most up to date rom from the website or in my case needroms website . Then i just installed the rom from update on the sd card View attachment 3357925 then it took about 3-5 mins to install and i rebooted it. View attachment 3357928 After this it should be as normal like flashing any rom onto any android device then wolla done even all my apps and data remained safe because it was only a software update flashed over.
Click to expand...
Click to collapse
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
majklB said:
I have the same problem.
If I press volume - and power device doesnt go to recovery, it just show Nubia logo on the screen for a while, then screen is black, That is all. If I plugg it into PC, computer can see one part of partiition with -Image- directory and a few unreadable partitions..
Do you know what to do, please????
Click to expand...
Click to collapse
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
I tried this already, just without sd card. Problem is, that I cannot go to recovery. If I press volume - and power I'll get just on logo screen, nothing else...
If I plug completely discharged phone on charger and press nothing, then just charging procentage appear for a while and then is dead again.
you can use one-click-tool.
first you switch off your.....try two or three times....or try again and again ....if you switch off your fone....then try to switch on in to fastboot....i have downloaded a fast boot rom..........1.16 version........extract the downloaded folder then first you click on ....z9 mini app in this folder.....and connect your mobile to pc......its start in automaticly.......wait for restart.......ohla....your mobile runs....https://drive.google.com/file/d/0B14zmeE7OLybaW5KWS1rME1Fd0U/view?usp=sharing
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
majklB said:
Problem solved!!!
This helped:
- Use a fast microSD card and copy on the root folder the original Nubia ROM (you can download it on the first page of this thread)
- Insert this microSD card into the phone
- Turn on your phone and let the battery completely discharge
- When the phone is turned off, press and hold Volume - than connect your AC adapter (USB cable connected to PC does not work), en Should start in bootloader menu
- If you can successfully start the bootloader menu, run the phone into recovery mode and than install the rom from external sd card
At the moment there is not any tool or bin format image for this phone
Click to expand...
Click to collapse
where is the rom?
Hi @ all.
I have managed this problem using volume up and power button. After first bootscreen hold the on button and wait until the second boot screen turn of. Release all keys!
Thats all.
The smartphone is off and you can return to recovery.
z9minimal
majklB said:
Problem solved!!!
This helped:...
-
Click to expand...
Click to collapse
Thanks a million, it saved my phone
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Problem solved!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
oleg1980 said:
Hello everyone!
I had the bootloop problem and I could solve it following your recommendations. My problem is that the original ROM installation process was suddenly stopped (I don't know exactly why) and now I have no access to the OS. Everytime I reboot it, the system goes to the bootloader showing this message:
Bootloader Menu
You entered this screen because:
No kernel (boot partition is bad)
Now you are in fastboot mode
The phone is fused
Then I have access to TWRP or to the original Nubia recovery, but I can't install a new ROM. I can restore backups but when I restart the system it goes to the bootloader menu again. Any solution for this issue?
Thank you in advance!
Click to expand...
Click to collapse
oleg1980 said:
Hi again!
I finally could flash the official ROM via TWRP. Initially I was trying to flash this ROM from the SD card, but the installation didn't work neither with TWRP nor with Nubia recovery. Then I copied the ROM to the internal storage and flashed it with TWRP with no more issues. Hope this information is useful for other members.
Thank you!
Click to expand...
Click to collapse
Hi once again, dudes!
As I told you this morning, I finally managed to fix my problem with the no-kernel message. However, after the reboot, I have lost wifi and bluetooth connections. When I turn on the wifi it doesn't even search for available networks. I have tried with official ROMs 1.16 and 1.19 and with a custom multilanguage ROM, doing factory reset (sometimes even system formats) before each ROM installation. Everything is working properly but I can't turn on the wifi and bluetooth.
Any idea or solution? Thank you very much!
Solution to WiFi and Bluetooth problems
Just to let you know that I finally managed to solve my problem with WiFi and Bluetooth. I got a backup of the 'persist' partition from a colleague's Z9 mini that worked perfectly and restored it in my device via TWRP.
RAW format image caputure
hi guys,
Since Nubia Z9 Mini runs on Android 5.0 (Lollipop version) with latest Camera 2 APIs with Manual control over camera, would like to know if the default Camera App supports Image capturing in RAW format.
Also can we use third party application like Camera FV-5 which supports RAW format image capturing feature in Nubia Z9 Mini,
Since you guys are users of Nubia Z9 Mini, pls. confirm this for me..
Thanks in advance..
Jeff72fr said:
Don't do nothing I had the same bug here with the logo Nubia again and again.
Just let the phone discharging itself (as you can't remove the battery).It will take around 24 hours.
Put an official rom on your sd card.
When the battery is out (try to power and if nothing happens it's good) just plug your phone to charge (not on pc) and try to go to the recovery.It should works.
Then load the official rom and after you will restore your backup (if you have one).
Click to expand...
Click to collapse
And how do you let the phone discharging itsel if the initial screen with nubia logo dissappears after a few seconds???
It won't discharge itself because it switchs off every time.
Anyone can tell me what to do?
Thank you.
Problem with Nubia Z9 mini
I've had this phone for 1 month and installed this ROM - http://forum.xda-developers.com/general/rooting-roms/rom-nubia-z9-mini-nx511j-rom-twrp-t3142204
Phone was working perfectly fine this morning but I noticed it had only about 30% battery left so I tried to charge it and it wouldn't charge? Tried computer cable, original Nubia cable and even others and nothing charged the phone. So decided to restart the phone to see if this fixed it and now the phone is just stuck on Nubia home screen . Can't restart or turn off or anything.... If i press volume down and power button it makes the screen print/camera sound and that's all i can do.
I'm not the most technical with all the mobile software stuff ect but can manage if guided
Also the phone is becoming really hot
Would greatly appreciate some help with this
thanks
I have a different problem here . I had stock ROM (India) when I purchased. Very laggy. I rooted, loaded TWRP, put MIUI-6, it was better, all working, but a little laggy too. Later put [email protected] The ROM is good (faster, very clean and clear voice, faster wifi etc...) but later found data not working. I read somewhere that the ROM may not be suitable for Indian version. When I want to load back the backup of MIUI-6, I am unable to boot in recovery mode. Only Nubia logo appears with all combination of switches. I am able to enter into recovery menu (Vol- and power). When I select "boot into recovery mode", only Nubia logo appears. I saw the directories in the PC, there is no TWRP directory in the internal storage. I tried to once again load TWRP, in the PC I get everything o.k, but in the phone, it strucks at recovery screen, and hangs. I have to press vol- and power to reboot again. It reboots o.k. Now, how do I get into TWRP recovery? Is there anyway to make data working with the present ROM? I tried all, like, draining the battery ...... etc.... not helping. Some information in this regard will be of great help.
I have tried everything possible as below.
As the above case, I am also using Indian version of Z9 Mini. I have flashed TWRP and then flashed MIUI6 & 7 and after that I came back to original rom through backup. Then after that, once again I came to MIUI7, after that when I tried to came to original rom, I can't. So I have downloaded last ROM from [email protected] , that is 3.61 . I that, my sim cards were not detecting. After that, when I tried to open TWRP , I can't. Just Nubia logo screen. After that I tried One Click Root Tool to flash TWRP. At that time , when my phone gone for rebooting , it's gone. Now whenever I tried to boot the phone or boot into bootloader , only that nubia logo screen appears. When I tried to flash through fastboot , device is not detecting. Why so ? . No partitions are seen on computer . I have tried all above steps , but no help . When I tried that fastboot flashable ROM by vijay2 , phone reboots to bootloader and in computer, it flashes everything. But after reboot , it is as same as before . What to do ? . If it is the case of missing driver , then please give me a link for it.
I have a MI3 for almost a year now. When I unplugged it from the charger last sunday, the phone totally blocked. Continuously apps block and shut-down (with the white attention: report MIUI or shut down), even the most important, such like the operating system.
The phone now doesn't go past the installation screen (choose language and WIFI etc.). When it does go past that screen, the screen turns black. I tried the recovery mode to reboot and I tried to flash it on my computer. Both didn't work. The computer doesn't even recognize the phone as a device.
Is this a common problem? And the most important question: how to solve it?
Thnx
1st you need to update your usb drivers and see that your pc is now recognizing your device or not...
And now you can flash miui stock rom with fastboot mode..
You can find the full flashing guide here http://forum.xda-developers.com/xiaomi-mi-3/help/fix-bricked-xiaomi-mi3-mi4-t3154558
I hope it will help you..
Hello,
I've recently bout this tablet Air III and I've immediately put the new bios on to make it dual boot with windows. All went fine and I had Android + Windows on it. Few days ago I did a factory reset on Android and for some reason it didnt work properly - it got stuck on "Erasing" with a little droid logo (I even left it once overnight, thinking that it might be taking a lot of time to finish). To fix that, I've decided to reflash just Android, using Mirek's tools. It all went well (at least according to the tools), but now when I boot the tablet, Teclast logo is displayed for about 5 seconds and then a black screen and nothing happens. Again, I've tried waiting for hours on that black screen, nothing happens.
Does anyone have any idea what seems to be the problem?
You might try resetting the BIOS to defaults, after that entering into DnX-Mode and make a clean flash of Mireks ROM? (Which Air III - version do you have? 32 gb (M5C5) or 64 gb?)
kelebek said:
You might try resetting the BIOS to defaults, after that entering into DnX-Mode and make a clean flash of Mireks ROM? (Which Air III - version do you have? 32 gb (M5C5) or 64 gb?)
Click to expand...
Click to collapse
I tried all of that already, no effect sadly. I have 32GB - M5C5
Sounds like you've flashed the wrong BIOS.
You should be able to use the DNX flash tool to flash a new BIOS. If not then you'll have to reprogram/replace the BIOS chip on your device.
cscz23 said:
Sounds like you've flashed the wrong BIOS.
You should be able to use the DNX flash tool to flash a new BIOS. If not then you'll have to reprogram/replace the BIOS chip on your device.
Click to expand...
Click to collapse
Have you got any advice on how to flash a new bios and what tools to use? All the guides I could find required being able to boot into Android first.
arczi19 said:
... All the guides I could find required being able to boot into Android first.
Click to expand...
Click to collapse
You should find solutions on how to flash the BIOS from fastboot- as well as from DnX-Mode.
EDIT: Problem is solved. Issue was an old BIOS version. After flashing to 2.02 it does work. Don't know why dual boot was working before though.
Hey guys,
I've got a Teclast X98 Air 3G for repair here which is giving me a hard time. First of all: I flashed tons of those devices already, so I know what I am doing.
So here is the issue:
I am unable to restore dual boot on this C8J6 model, which has been lost after trying to re-install Windows. Usually it is very easy to do this: Restore the Android, afterwards boot the tablet from a WINPE stick along another NTFS stick containing the factory restore image for Windows. Well, exactly this is what does not work. I can flash Android and Android does boot. However, Android is the only thing that boots on this tablet. The dual boot menu does not appear anymore. If in Android I select "boot to Windows" it just reboots to Android. If I boot up with Vol+, it still does only boot to Android. If I select my WINPE stick in the BIOS (boot override), the screen goes black for a short time and then I am back inside the BIOS menu. This also happens with a pure Windows 10 stick that boots flawlessly on any other device.
I tried the following things to fix this but without results:
- Flash Mirek V7 using the entire 64GB storage and then restore the original partition layout
- Flash the official Android 5.0 image
- Flash the originale Android 4.4.4 image the tablet shipped with
None of these procedures brought back the ability to boot any other OS than Android.
Now my last hope is that someone of you guys has an idea on how to get rid of this issue.
Cheers,
Chris