Database Develop

[Q] Urgent Help required. Phone bricked?

Hi,
I know this is another of those phone bricked posts. But please help me guys..this is really getting me tensed..
I had installed Darky's 9.5 with his kernel.
I then installed Dungeon Defenders game and was trying it out when the phone hanged on me.
I had to remove the battery but since then it won't start.
I only shows me the Samsung GT-i9000 screen and I hear 'recover operation' in the background in a loop.
The recovery mode doesn't start giving the same error.
The download mode was working.
I tried to use ODIN 1.3 to flash stock DDJP6 rom.
It failed giving me
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.rfs
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Then the phone screen turned. No button would bring the download mode back.
I then tried removing the battery and getting into download mode again.
All I now see is an icon with the phone on the left and a computer on the right and an alert kind of icon in the center.
Please help!!!
Nilesh
UPDATED: I removed the battery and tried download mode again and it wen't it. I then flashed DDJP6 and everything is fine now!!

heya m8
i had that same problem 3 day's ago lol
when i had that display on my foon i freaked out lols
but you can still go to Download mode,, atleast i could..
so i think you should use a other mod jeh

YADRFMPP
jje

Bricked after using odin3

First of all I'm a beginner in android world .
Kernal: 2.6.32.9
[email protected] #1
The problem is:
I was trying to root my Galaxy S I9000 following the steps of [GUIDE] And then there was ROOT !
Everything was great until this step:
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
Odin gave me a red flag with " Failed " and I got this message:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I unpulged my device and turned it off, when I turned it on a device-!- computer screen appered, after many tries I took off the battery and put it then I pressed the three combo button, finally I managed to get to download mode.
Now:
-My computer recognizes the device but Kies doesn't ( although it's the latest version and I tried to reinstall the drivers.)
-Odin keeps giving me the same error, and sometimes it stay stop at <ID:0/009> SetupConnection.. ( I tried XWKDD_insecure.tar & KE2_original.zip )
-I'm stuck in download mode.
Please help me get my phone to work (I prefer to return to the same firmware if it's possible).

https://www.wuala.com/Samsung Galax...and Odin/Original Firmwares/?key=AfzUZSU4SpKU
Download your original firmware from here and flash it in odin.
E: Btw are you using latest odin?

I got same problem when i m newb so calm down first go to www.samfirware.com and select ur phone download latest europen rom it is JVR and then flash them via odin by putting file respectively
Sent from my GT-I9000 using XDA App

[Q] Bricked after Odin flash back to stock attempt

Really need your help here guys...
Wanted to flash stock firmware back on to my i9000 on O2 UK, after its overall performance and stability had degraded over recent months. My phone was rooted and was running 2.3.6 on XXJVU I believe.
Downloaded stock firmware via samfirmware.com (can't post as actual link as I haven't posted more than 10 times) from this URL:
www .hotfile. com/dl/155165253/45ea7e1/I9000XWJVH_I9000O2UJV3_O2U.zip.html
The downloaded file I9000XWJVH_I9000O2UJV3_O2U.zip, when extracted, gave me:
SS_DL.dll
jvh_jv3_jv2.tar​
When I extracted this .tar file, the following files appeared:
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage​
I'd read that Sbl.bin was the bootloader, and I knew that 'modem' was another name for the PHONE element (a.k.a. 'baseband' I think?), so....
I used Odin3 v1.82 and selected .pit file 803, then selected jvh_jv3_jv2.tar for all four of BOOTLOADER, PDA, PHONE and CSC, and also checked Re-Partition, Auto Reboot and F. Reset Time.
The flash failed, with the following message in Odin:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.rfs
<ID:0/007> factoryfs.rfs
<ID:0/007> modem.bin
<ID:0/007> param.lfs
<ID:0/007> Sbl.bin
<ID:0/007> zImage
<ID:0/007> boot.bin
<ID:0/007> cache.rfs
<ID:0/007> factoryfs.rfs
<ID:0/007> modem.bin
<ID:0/007> param.lfs
<ID:0/007> Sbl.bin
<ID:0/007> zImage
<ID:0/007> boot.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> cache.rfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> factoryfs.rfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007>
<ID:0/007> Receive Response form LOKE
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​
So I read around a bit more about the LOKE problem and it getting stuck on factoryfs.rfs, and someone had managed to get around it by flashing the individual elements separately, i.e. first the .pit file, then the BOOTLOADER, then the PDA, etc, followed by updating the phone via Kies.
So I thought I'd give gave that a try. After unplugging and forcing then phone to restart Download mode, first I flashed the .pit file (803), after which the phone just switched off, but Odin said this was a success.
Then for each subseqent stage, again I selected jvh_jv3_jv2.tar each time, only this time flashed BOOTLOADER, PDA, PHONE and CSC separately.
According to Odin, this worked for BOOTLOADER. The Odin message was:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.rfs
<ID:0/007> factoryfs.rfs
<ID:0/007> modem.bin
<ID:0/007> param.lfs
<ID:0/007> Sbl.bin
<ID:0/007> zImage
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!​
However, when the phone then auto-rebooted into Recovery mode, it spewed out this:
E:copy_dbdata_media:Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
-- Deleting files...
E:failed to mount /dbdata (File exists)
E:delete_data_files:Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
-- Updating filesystem...
E:failed to mount /dbdata (File exists)
E:discard_filesystem_for_rfs:Can't mount /dbdata
-- Wiping cache...
Formatting /cache...
Cache wipe failed.
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/KOR/system/'.
Successfully applied multi-CSC.​
So, reacting to the parts in bold above, I first selected wipe data/factory reset, and got this message:
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Deleting Meta Data
Formatting /cache...
Data wipe complete.​
Is the bold/italic bit crucial?
I then selected wipe cache partition, and got:
-- Wiping cache...
Formatting /cache...
Cache wipe complete.​
I then thought I'd better try a reboot. The phone went through the standard shining Galaxy S logo bootload animation, but then just kept repeating it. I'm presuming this is what others have referred to as their phone being stuck in a bootload loop?!
I then forced it back into Download mode, and flashed jvh_jv3_jv2.tar as the PDA, to which Odin said:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> cache.rfs
<ID:0/007> factoryfs.rfs
<ID:0/007> modem.bin
<ID:0/007> param.lfs
<ID:0/007> Sbl.bin
<ID:0/007> zImage
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!​
The phone then auto-rebooted into Recovery mode again, and gave me the exact same series of messages as it did after flashing the new bootloader. So, again, I did a wipe data/factory reset and wipe cache partition (same output messages as before), and then rebooted.
Phone got stuck on boot animation again, so I forced it back into Download mode, and flashed jvh_jv3_jv2.tar as the PHONE.
But I just got a similar error message from Odin as when I tried flashing all 4 elements plus the .pit file together:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> cache.rfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response form LOKE
<ID:0/007> factoryfs.rfs
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007>
<ID:0/007> Receive Response form LOKE
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​
It always seems to be when Odin is trying to flash factoryfs.rfs that it fails. I have to unplug my phone when the flash has failed, and when I try to reboot, all I get is an icon with a mobile phone on the left, a PC on the right, and a dotted line running between them with an exclamation mark on an orange triangle in the middle of it. I presume this is supposed to prompt me to reconnect my phone to the PC, but until I can get the stock firmware to flash successfully, there's no point!!
I can still force the phone into Download Mode, but not into Recovery mode.
PLEASE can somebody tell me where I'm going wrong!?!
- is it a dodgy download of the firmware in the first place? If so, can anyone direct me to a reliable one that contains PDA: I9000XWJVH, PHONE: I9000BWJV2, CSC: I9000O2UJV3?
- shouldn't the PDA/PHONE/CSC files be extracted from the download as separate .tar files, and then selected individually in Odin... rather than the same .tar file being selected for each element in Odin?
- do I need to leave the .pit file and BOOTLOADER elements out of it, and just flash the PDA/PHONE/CSC?
Help!! I can't find an alternative download for the stock firmware, every other download link takes me to a page where it says 'This file is either removed due to copyright claim or is deleted by the uploader.'
Any advice/assistance you can give would be a massive help.
Thanks

vindiablo said:
E:format_volume: rfs format failed on /dev/block/stl10
Click to expand...
Click to collapse
to solve this you only need to flash a dbdata.rfs file as PDA in odin3..look at My Android Solutions
vindiablo said:
Help!! I can't find an alternative download for the stock firmware, every other download link takes me to a page where it says 'This file is either removed due to copyright claim or is deleted by the uploader.'
Any advice/assistance you can give would be a massive help.
Click to expand...
Click to collapse
any firmware you need can be found at My Android Collections under ROMS
all you need to do is flash a JVU ROM with a PIT file or use a rescue kit and your problem should be resolved
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing

xsenman said:
to solve this you only need to flash a dbdata.rfs file as PDA in odin3..look at My Android Solutions
Click to expand...
Click to collapse
Removed external SD card, SIM and battery, held power button down for one minute.
Replaced battery, rebooted into download mode, then flashed dbdata.rfs as mentioned. Phone rebooted fine. Looked in 'About Phone', and had PDA: I9000XWJVH and CSC: I9000O2UJV3, exactly as I wanted, but no PHONE/BASEBAND/MODEM.
xsenman said:
any firmware you need can be found at My Android Collections under ROMS
all you need to do is flash a JVU ROM with a PIT file or use a rescue kit and your problem should be resolved
Click to expand...
Click to collapse
Downloaded PHONE_XXJVU.tar.md5 via your link, then flashed that with 803 .pit file (repartition checked). Odin confirmed flash was successful, but then the phone's screen went black and I can't get it to reboot in recovery or download mode.
I've tried a battery pull and holding power button down for a minute, tried connecting phone to PC via USB, no life from phone and not coming up as connected in Odin. Completely dead and unresponsive!!

vindiablo said:
Downloaded PHONE_XXJVU.tar.md5 via your link, then flashed that with 803 .pit file (repartition checked).
Click to expand...
Click to collapse
repartitioned is only done with a 512 PIT not 803 Pit
vindiablo said:
I've tried a battery pull and holding power button down for a minute, tried connecting phone to PC via USB, no life from phone and not coming up as connected in Odin. Completely dead and unresponsive!!
Click to expand...
Click to collapse
was your Battery fully charged or at least over 50%, when you flashed? This will only happen if bootloader failed in the starting process ...not too sure If the wrong PIT partition could cause it, anyway look at the various options for obtaining download mode in My Android Solutions and also scroll down to the solutions for unresponsive phone

Hey, you should follow this guide: http://forum.xda-developers.com/showthread.php?t=965190
Also try out this application: http://fus.nanzen.se/
First download the latest firmware with fus downloader and then use the guide above. That worked for me

i also having the same issue like this after i format /sdcard, /mmc adn everything under CWM. need urgent assist on this. @@

@vindiablo, hope you got your phone back in working condition.
@iversonltsy, try sending a private message to xsenman

[Q] HELLLP! nonworking screen turned into more serious problem while install 4.4.2!!!

i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3

tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue

Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)

SM-9208 (Taiwan) cannot flash TWRP through ODIN

HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it ( i.imgsafe.org/ce3bada933 .jpg) remove space before .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks

..

Got the same problem after latest update of my note 5 SM-N9208 from Philippines.

yogiexp said:
blue screen error with chinese text i.imgsafe.org/ce3bada933 .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
Click to expand...
Click to collapse
Tried it but doesn't work.

yogiexp said:
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
Click to expand...
Click to collapse
Just found a way to get TWRP back on my note 5.
I flashed with odin the Chainfire autoroot Auto-Root-noblelte-nobleltextc-smn9208.tar.md5
Your phone will get stuck on boot screen and it will say in left upper corner "seandroid not enforcing".
Push volume down + home + on/off, to get back in download mode.
Flash with odin the TWRP file.
Now you will have working TWRP (i rooted my phone directly)
It worked for me, let me know if it worked for you.
Regards,
Pr4d0

Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g

dhonzik said:
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
Click to expand...
Click to collapse
thanks i think its the issue with crom unlock, but i see warning everywhere it will knockout knox! i was trying to have twrp without rooting or disable knox, but i guess i dont have choice with my model.