Related
I posted these step-by-step instructions in another thread but thought others might like to see them in their own thread. This works for Dev Ed Moto X's running either 4.4 or 4.4.2. If you have a non-Dev Ed with an unlockable bootloader, it works for those, too, but of course you void your warranty if you unlock your bootloader if you have a non-Dev Ed.
To unlock and root the developer edition:
1) Get the unlock code from Motorola and unlock the bootloader by following the directions in this link, including downloading the Android SDK and installing Motorola Device Manager:
Unlock Moto X Bootloader
2) Get mfastboot.exe here:
mfastboot.exe
and place it in the same directory as fastboot (fastboot is in the \sdk\platform-tools subdirectory of the Android SDK).
3) Get the TWRP custom recovery for kit kat here:
TWRP for Moto X 4.4
and place it in the same directory as fastboot.
4) On your unlocked Moto X, enable USB debugging and download SuperSU here:
SuperSU 1.93
5) Double check to make sure USB debugging has been enabled! Put your unlocked Moto X into bootloader mode by pressing the Volume Down button and then the Power button. Hold for about 3 seconds and release and you should be in bootloader mode. Connect your Moto X to your PC via a USB cable.
6) Open a command prompt on your PC and change directory to the folder where mfastboot.exe is.
7) At the command prompt type:
mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img
to flash the custom recovery to your Moto X.
8) After the custom recovery has been flashed to your Moto X, at the command prompt type:
fastboot reboot-bootloader
to reboot into the bootloader.
(I am not sure if this step is necessary but I read somewhere it was necessary and I did it and it worked).
9) Unplug your device from your PC. Then get into recovery mode by pressing the Volume Down button to highlight recovery mode and pressing the Volume Up button to select the recovery mode.
10) You should now have booted into the Team Win Recovery Project custom recovery. Click on Install to install SuperSu. Scroll down to find the sdcard and select it. Then scroll down to download and select it. Select the SuperSU zip file and swipe to install.
If you want to check to see if you successfully rooted, you can download Root Checker Basic from the playstore and it will tell you if you are rooted.
From what I have read you can use the version of TWRP I linked to above to root 4.4.2.
Remember, to take an OTA, you have to revert back to stock!
bumping this.
+1
Sent from my XT1060 using Tapatalk
Thx
Sent from my XT1058 using Tapatalk
I assume this is the same process regardless of Android build # (ie. After updating to 4.4.2) ...
Tapatalked via my moto x
YankInDaSouth said:
I assume this is the same process regardless of Android build # (ie. After updating to 4.4.2) ...
Click to expand...
Click to collapse
It works for both 4.4 and 4.4.2.
Can anyone post the steps to flash stock recovery to accept the OTA TO 4.4.2? Thanks.
Sent from my XT1060 using Tapatalk
ragingd said:
Can anyone post the steps to flash stock recovery to accept the OTA TO 4.4.2? Thanks.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
Grab the firmware for your model here: http://sbf.droid-developers.org/phone.php?device=0
Then you can follow the steps from here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images ... Of course if you don't have flash every component, only what you need. Recovery of course and perhaps system...
Tapatalked via my moto x
Assistance
Perhaps someone could shed some light on this for me. I have a T-Mobile (XT1053) with an unlocked bootloader (I'm certain it's unlocked as I get the unlocked bootloader warning). I unlocked via Motorolas site. I then attempted to install TWRP with mfastboot, which it says it has done, but then when I attempt to reboot into recovery, it just ends up at a black screen (off essentially) and I can only power up as normal. Any one have any ideas?
Tuse0708 said:
Perhaps someone could shed some light on this for me. I have a T-Mobile (XT1053) with an unlocked bootloader (I'm certain it's unlocked as I get the unlocked bootloader warning). I unlocked via Motorolas site. I then attempted to install TWRP with mfastboot, which it says it has done, but then when I attempt to reboot into recovery, it just ends up at a black screen (off essentially) and I can only power up as normal. Any one have any ideas?
Click to expand...
Click to collapse
First, with your device disconnected from any power source, boot into bootloader mode and verify that it says Device is UNLOCKED. Status Code: 3. BTW - the bootloader unlocked warning logo stays even if you relock the bootloader unless you flash a new logo.
Then if it does say device is unlocked, hit Volume Down to highlight Recovery and Volume Up to select recovery. Is that when you see a black screen? It takes TWRP a little while to load.
Cozume said:
First, with your device disconnected from any power source, boot into bootloader mode and verify that it says Device is UNLOCKED. Status Code: 3. BTW - the bootloader unlocked warning logo stays even if you relock the bootloader unless you flash a new logo.
Then if it does say device is unlocked, hit Volume Down to highlight Recovery and Volume Up to select recovery. Is that when you see a black screen? It takes TWRP a little while to load.
Click to expand...
Click to collapse
Nevermind....Thanks for the help, got it going.
thanks!
jodaboda said:
thanks!
Click to expand...
Click to collapse
You are welcome!
So I'm getting an unlock code. I am currently on 4.4.2, and if I read the posts right, I don't have to downgrade to 4.4 to root, TWRP will still root 4.4.2 without issue, right?
EDIT
Nevermind. I've slapped my Moto, so I'm going to SBF back to 4.4.2 to make sure there aren't any... issues...
I'm currently rooted on 4.4. I have made changes to /system, so I can't take the OTA. I got an unlock code today. I understand that unlocking the bootloader will induce a Factory Data Reset. Do I need to SBF to stock 4.4 (or 4.2.2) before I do this? Will the FDR clear up the changes I made?
Furthermore, what order should I do these steps in? If I have 4.4 and unlock/root it, I can't take the OTA with non-stock recovery, correct? I would need a flashable ZIP for TWRP/CWM? Would it be better to unlock, FDR, take OTA to 4.4.2, then do TWRP and root?
Hopefully this isn't too silly of a question, I appreciate any advice for the best path to take on this.
Hey all, just ordered a Dev Edition to go along with my N5 and had a question regarding mfastboot. I downloaded mfastboot from one of the stickies, it was only one file and placed it in my sdk platform tools folder. I was reading on Motorola website about flashing factory images and seen this note-"NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility.". First of all, what does it mean included in Windows directory? And I'm guessing about not using the Android fastboot utility, they want you to use "mfastboot flash...." instead of "fastboot flash...."? Just trying to get some research in before I receive the device. I'm used to using fastboot on my Galaxy Nexus and now my N5. I used to have alot of Moto devices before this and using the SBF files in Moto's flashing tool, but never had an unlockable bootloader Moto device that can use some form of fastboot.
t1.8matt said:
Hey all, just ordered a Dev Edition to go along with my N5 and had a question regarding mfastboot. I downloaded mfastboot from one of the stickies, it was only one file and placed it in my sdk platform tools folder. I was reading on Motorola website about flashing factory images and seen this note-"NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility.". First of all, what does it mean included in Windows directory? And I'm guessing about not using the Android fastboot utility, they want you to use "mfastboot flash...." instead of "fastboot flash...."? Just trying to get some research in before I receive the device. I'm used to using fastboot on my Galaxy Nexus and now my N5. I used to have alot of Moto devices before this and using the SBF files in Moto's flashing tool, but never had an unlockable bootloader Moto device that can use some form of fastboot.
Click to expand...
Click to collapse
Fastboot can't handle the file sizes. So Motorola made mfastboot. You have to use it when flashing the Moto x.
Sent from my cell phone telephone....
kj2112 said:
Fastboot can't handle the file sizes. So Motorola made mfastboot. You have to use it when flashing the Moto x.
Sent from my cell phone telephone....
Click to expand...
Click to collapse
Ok, gotcha. And I've been reading a little about people wanting to downgrade from 4.4.2, but if you have a locked bootloader and upgraded to the latest bootloader, they can't without bricking. I assume this won't be an issue with an unlocked bootloader, even though I'm not sure of why you would want to downgrade. Edit: I see, for root reasons, but this shouldn't be an issue if you're flashing SuperSU in TWRP?
Edit again: I should read more. Rooting 4.4.2 with an unlocked bootloader isn't an issue if I follow this guide in this thread. Thanks for your help. Looking forward to getting this device.
t1.8matt said:
Ok, gotcha. And I've been reading a little about people wanting to downgrade from 4.4.2, but if you have a locked bootloader and upgraded to the latest bootloader, they can't without bricking. I assume this won't be an issue with an unlocked bootloader, even though I'm not sure of why you would want to downgrade. Edit: I see, for root reasons, but this shouldn't be an issue if you're flashing SuperSU in TWRP?
Edit again: I should read more. Rooting 4.4.2 with an unlocked bootloader isn't an issue if I follow this guide in this thread. Thanks for your help. Looking forward to getting this device.
Click to expand...
Click to collapse
Root will be easy. Same as a nexus. Unlock bootloader, flash custom recovery....root. install superSU if needed.
As far as what's NOT like a nexus....yes, you can still brick downgrading an unlocked device....even the dev edition...which is no different than any other unlocked Moto x. Without going into all the details, you can read about it all over....there is a specific way to downgrade. And you cannot take an ota after....that MAY brick any Moto x...locked or unlocked. There is tonnes of conflicting opinions on this....so read as much as you can, and decide from there. There's very specific ways to downgrade and upgrade after. In my opinion....there's risk involved in all of it.
Just Google "Moto x brick downgrade xda" to read the stories.
If you find you must downgrade from 4.4.2.....study hard before you do.
Sent from my N5, N7, Moto X,G Tab 3 or S2.....
kj2112 said:
Root will be easy. Same as a nexus. Unlock bootloader, flash custom recovery....root. install superSU if needed.
As far as what's NOT like a nexus....yes, you can still brick downgrading an unlocked device....even the dev edition...which is no different than any other unlocked Moto x. Without going into all the details, you can read about it all over....there is a specific way to downgrade. And you cannot take an ota after....that MAY brick any Moto x...locked or unlocked.
If you find you must downgrade from 4.4.2.....study hard before you do.
Sent from my N5, N7, Moto X,G Tab 3 or S2.....
Click to expand...
Click to collapse
Great info. But the only reason people are downgrading from 4.4.2 is if they have a locked bootloader and want to retain root?
Hello, I am returning my Moto X back to motorola and had a few questions. I have the Tmo US xt1053 model that i've updated to 4.4.2, unlocked the bootloader, flashed twrp and rooted. I want to return it to stock but there are no factory firmware images for the Tmobile US 4.4.2 and I would like to avoid bricking my phone. I was going to return to the stock recovery and then just factory reset it from the privacy menu but I am afraid to flash the stock recovery for fear of bricking it.
So my question is, can I flash the stock recovery found here: http://www.addictivetips.com/android/root-moto-x-install-cwm-recovery-complete-guide/ ? I can't seem to figure out if there are different recovery versions like there is bootloader versions and if I don't flash the correct one I'll brick something.
I know the bootloader was updated with 4.4.2 so I can't return to 4.4 but if I flash that stock recovery can I just use the factory restore option in the stock rom to remove all my data and root? I know the bootloader will still be unlocked but I highly doubt they will notice that since they never seem to check the bootloader unless its obviously unlocked.
Are you slow???
Turn your phone off then turn it back on and explain to me how you expect them not to notice your bootloader is unlocked?
Even if you used a different boot image to hide the warning, it shows that you're bootloader is unlocked in fastboot. I wouldn't bother hoping they don't notice, I'd hope they don't care.
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!
Did you read at all when you unlocked the bootloeader? Your warranty is voided. They do not need to have physical contact with your phone at all to determine it's voided.
Just for xt1053, you can downgrade firmware from 4.4.2 to 4.4, but just for this specific case, it doesn't mean it won't brick for other version.
SymbioticGenius said:
Are you slow???
Turn your phone off then turn it back on and explain to me how you expect them not to notice your bootloader is unlocked?
Even if you used a different boot image to hide the warning, it shows that you're bootloader is unlocked in fastboot. I wouldn't bother hoping they don't notice, I'd hope they don't care.
Click to expand...
Click to collapse
Fastboot OEM lock
Problem solved?
eksasol said:
Just for xt1053, you can downgrade firmware from 4.4.2 to 4.4, but just for this specific case, it doesn't mean it won't brick for other version.
Click to expand...
Click to collapse
I hope you didn't flash the bootloader for 4.4, if you did... enjoy your new paperweight
mastarifla said:
Fastboot OEM lock
Problem solved
Click to expand...
Click to collapse
Relocking the bootloader and never locking the bootloader are completely different things. Good luck with that.
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!
SymbioticGenius said:
Relocking the bootloader and never locking the bootloader are completely different things. Good luck with that.
Click to expand...
Click to collapse
Turns out Motorola uses the QFuse system. While the bootloader will look perfectly "stock"/locked to you, Moto will be able to see that the secure boot fuse was blown, thus, re-locking your bootloader is effectively pointless.
mastarifla said:
Fastboot OEM lock
Problem solved?
I hope you didn't flash the bootloader for 4.4, if you did... enjoy your new paperweight
Click to expand...
Click to collapse
It doesn't let you downgrade it regardless, so doesn't matter.
Also fastboot oem lock only work for developer version, and you have to go through the "fastboot oem lock begin" process: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
I don't think you can relock the regular version.
eksasol said:
It doesn't let you downgrade it regardless, so doesn't matter.
Also fastboot oem lock only work for developer version, and you have to go through the "fastboot oem lock begin" process: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
I don't think you can relock the regular version.
Click to expand...
Click to collapse
...Unless if you manually flash the files, in which the problem occurs
T-Mobile version is the same as the Dev, maybe the AT&T version is different
How can I relock my bootloader (XT1092) please? I know how it is done in theory ("fastboot oem lock begin" + flashing the factory image + erasing user data/cache + ending with "fastboot oem lock"), but it just does not work - I am getting a "not signed system error" with the stock firmware for the XT1092 which I grabbed from a link in the xda forums.
Motorola published only the factory image for the XT1095, I know that too. So is this the problem, that the captured firmware (not from the Motorola website) of the XT1092 is not validated for the procedure to relock the bootloader of the XT1092?
Thanks in advance for any tip!
same problem here, Ive tried flashing the lollipop firmware but I couldnt relock. I get this problem
SST lock failure!
Now Im downloading, RETEUALL_XT1092_4.4.4_KXE21.187-42_cid7_CFC.xml.zip
and Ill try with it... no idea...
any help?
it's very important because I need to give the phone back to amazon.
What do you suggest, give it back with unlocked bootloader?
I can put the stock logo bin so they cant see the logo that tells that the phone is unlocked, hoping the man doesnt watch the bootloader screen
Hey guys,
I am currently trying to get my Moto X back to stock and relock the bootloader. Not because I need to, but just because I want to. I have a retDe XT1092 which I have converted to a XT1095. Is there any way to get the phone back to software status official and relock the bootloader? It doesn't matter to me that Motorola does know that I was unlocked before, I just want to relock it. I hope you guys can help me.
May I ask why you want to relock it? There really is no benefit to relocking it. :/
Anyway the command is:
fastboot oem lock
Sent from my XT1095
I know, but want to keep myself from flashing on this phone. I am trying to get away from rooting on non-nexus phones.
Yeah I've tried that multiple times, but as long as your software status isn't official the oem lock will fail. I'd guess this happens because most images you can download are not signed images.
Is your phone still converted to 1095? If so that is why lock wont work.
You would have to flash back the 1092 de image to be unmodified.
Sent from my XT1095
Okay good to know. I thought this wouldnt matter. But are there even any existing official images for the 1092?
Moto x firmwares:
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095
These aren't official. I've already tried them. If you flash those you won't be able to relock the bootloader. This is the reason why I opened this thread because I don't know any way of accomplishing my goal.
Bl4ckX said:
These aren't official. I've already tried them. If you flash those you won't be able to relock the bootloader. This is the reason why I opened this thread because I don't know any way of accomplishing my goal.
Click to expand...
Click to collapse
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.
juliospinoza said:
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.
Click to expand...
Click to collapse
His is retde. And these are official, they are leaks from motorola.
Sent from my XT1095
juliospinoza said:
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.
Click to expand...
Click to collapse
I was able to get the signed firmware from motorola, You have to start with fastboot oem lock begin and then flash. After flashing you use the fastboot oem lock and the bootloader will relock, however, you will still get the unlocked warning message. You will have to flash the modified logo.bin to make it go away.
AGISCI said:
His is retde. And these are official, they are leaks from motorola.
Sent from my XT1095
Click to expand...
Click to collapse
If you are so convinced that these are official I am willing to try them out but I am pretty sure they aren't
strafer69 said:
I was able to get the signed firmware from motorola, You have to start with fastboot oem lock begin and then flash. After flashing you use the fastboot oem lock and the bootloader will relock, however, you will still get the unlocked warning message. You will have to flash the modified logo.bin to make it go away.
Click to expand...
Click to collapse
This doesn't sound right. Using oem unlock begin the phone will check if each and every image is signed. You shouldn't be able to flash a modified logo.bin and the message should actually go away by itself. Are you sure your relock attempt didn't fail?
Bl4ckX said:
If you are so convinced that these are official I am willing to try them out but I am pretty sure they aren't
This doesn't sound right. Using oem unlock begin the phone will check if each and every image is signed. You shouldn't be able to flash a modified logo.bin and the message should actually go away by itself. Are you sure your relock attempt didn't fail?
Click to expand...
Click to collapse
I am 100% sure they are official because they are signed by motorola. If they were not official they wouldn't have motorola's signature.
Sent from my XT1095
AGISCI said:
I am 100% sure they are official because they are signed by motorola. If they were not official they wouldn't have motorola's signature.
Sent from my XT1095
Click to expand...
Click to collapse
I am currently downloading the XT1092 retDe image. I will report back in 6hours when I am back from work and this damn free download is finished. It takes forever..
The bootloader unlocked message would be a signed Motorola image since it is shipped with the phone. The bootloader essentially has a toggle that would switch between the normal and the unlocked message. I assume the toggle just doesn't get switched back when you OEM lock. It's not like he flashed a different custom logo or anything.
Sent from my Moto X 2014 Pure Edition using Tapatalk
Correct. You will notice the status message when you enter the bootloader there is a status code. 1=LOCKED 2=RELOCKED and 3=UNLOCKED. Once you unlock the bootloader, you can never go back to status 1 again and you will always get the bootloader unlocked message. If you read the message it states that the bootloader HAS been unlocked. There is a counter trigger in the phone telling it how many times it has been unlocked. When I had my old Galaxy S2 Skyrocket I remembered a program that would "RESET" this counter, but I do not believe one exists for Motorola. Once you unlock your bootloader there is no going back.
http://i5.androidxda.com/main/Motorola_Bootloader_Warning.png
Yeah I know about this relocked state, but it doesn't matter as I don't want to RMA the phone. I just want it locked but I wasn't able to accomplish a successful oem lock and I am now searching for a way to do so.
Edit: So this morning after the download had finished I brought my X to fastboot mode. And for whichever reason the software status was set to official even on the XT1095 image. I would have sworn that this wasn't the case when I flashed it and I have no idea why it changed. And a big thanks to you @AGISCI after typing "fastboot oem lock begin" I could flash the Image you linked here and software status stayed official and I was even able to relock the bootloader. So I simply must have had wrong images in the past, because I did entirely the same process I did now, 3 times already and it didn't work out at all.
So thanks again guys. The only annoyance is that I can't get rid of the bootloader unlocked message. This one seems to stay.
Relocked the bootloader on Droid Turbo/Moto Maxx and again try to unlock the bootloader
C:\adb>fastboot oem unlock
...
OKAY [ -0.000s]
finished. total time: -0.000s
Now this time there is no notification on the phone screen and phone reboots automatically. Now flashing the Android logo from last 5 minute.
Not able to boot in recovery mode. Only fastboot mode is working.
pedro_maciel said:
Relocked the bootloader on Droid Turbo/Moto Maxx and again try to unlock the bootloader
C:\adb>fastboot oem unlock
...
OKAY [ -0.000s]
finished. total time: -0.000s
Now this time there is no notification on the phone screen and phone reboots automatically. Now flashing the Android logo from last 5 minute.
Not able to boot in recovery mode. Only fastboot mode is working.
Click to expand...
Click to collapse
what happens if you do a factory reset from the bootloader? Also can you flash a factory image?
returns to the fastboot , and I can not flash factory image
Why did you relock the device in the first place? Not sure there is anything you can do at this point, I'm guessing you still had TWRP on the device which I believe would be the issue, but you can't remove that since your device is now locked and cannot be unlocked.
miketoasty said:
Why did you relock the device in the first place? Not sure there is anything you can do at this point, I'm guessing you still had TWRP on the device which I believe would be the issue, but you can't remove that since your device is now locked and cannot be unlocked.
Click to expand...
Click to collapse
Incorrect. With a locked bootloader, it's very possible to overwrite the recovery partition with the stock recovery menu. In fact, it's possible to flash all of the stock images with a locked bootloader. See section 0 of my guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
As for the OP's issue, I would say that if following section 0 of my guide does not solve the problem, you should probably consider your phone destroyed.
TheSt33v said:
Incorrect. With a locked bootloader, it's very possible to overwrite the recovery partition with the stock recovery menu. In fact, it's possible to to flash all of the stock images with a locked bootloader. See section 0 of my guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
As for the OP's issue, I would say that if following section 0 of my guide does not solve the problem, you should probably consider your phone destroyed.
Click to expand...
Click to collapse
Interesting, I didn't think that RSD would be able to modify the recovery partition on a locked device. Nonetheless if anything is going to work I believe what you have outlined is it St33v, best of luck to you OP.
miketoasty said:
Interesting, I didn't think that RSD would be able to modify the recovery partition on a locked device. Nonetheless if anything is going to work I believe what you have outlined is it St33v, best of luck to you OP.
Click to expand...
Click to collapse
Yep. As long as it passes the signature check, it flashes.
pedro_maciel said:
Relocked the bootloader on Droid Turbo/Moto Maxx and again try to unlock the bootloader
C:\adb>fastboot oem unlock
...
OKAY [ -0.000s]
finished. total time: -0.000s
Now this time there is no notification on the phone screen and phone reboots automatically. Now flashing the Android logo from last 5 minute.
Not able to boot in recovery mode. Only fastboot mode is working.
Click to expand...
Click to collapse
Let's be clear -- it was the Droid Turbo. Leave off the Moto Maxx part, OK?
You can lock/unlock a Moto Maxx (XT1225/XT1250) or even Moto Turbo (XT1225) all you want. In fact, the U.S. Moto Maxx XT1250 is IDENTICAL in every way to the Droid Turbo XT1254 -- radio bands, even the same FCC ID. Of all the Quarks, only Verizon's "Droid Turbo" has a carrier-locked down bootloader. All the others can be unlocked via the Motorola website. Whereas, the Droid Turbo bootloader unlock is a hack (Sunshine) that relies upon a vulnerability present in devices with Snapdragon 805.
miketoasty said:
Why did you relock the device in the first place? Not sure there is anything you can do at this point, I'm guessing you still had TWRP on the device which I believe would be the issue, but you can't remove that since your device is now locked and cannot be unlocked.
Click to expand...
Click to collapse
Yes, WHY would you do that? Devs went through all the trouble to find a vulnerability to UNlock the Droid Turbo, and you lock it back? Been posted MANY, MANY times with the Droid Turob it's a one-time unlock only, through Sunshine.
TheSt33v said:
Incorrect. With a locked bootloader, it's very possible to overwrite the recovery partition with the stock recovery menu. In fact, it's possible to to flash all of the stock images with a locked bootloader. See section 0 of my guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
As for the OP's issue, I would say that if following section 0 of my guide does not solve the problem, you should probably consider your phone destroyed.
Click to expand...
Click to collapse
While you can flash stock again with a locked bootloader and it can work, over in the Moto Maxx section many people did brick their phones because they refused to unlock their bootloaders first. They were more worried about their silly "warranty" than having a functioning device. We kept stressing, FIRST unlock your bootloader. If you mess up, it's an easy fix if a flash goes wrong. With a locked bootloader, a bad flash is a recipe for disaster.
Over in the Moto Maxx/Moto Turbo section was a write up about flashing images, similar to your write up:
http://forum.xda-developers.com/droid-turbo/help/tutorial-how-to-flash-official-firmware-t3074724
Usually people wanting to downgrade back to KitKat or flash a Quark image from another region (India Moto Turbo XT1225) got Lollipop first before Latin American Moto Maxx XT1225).
And people were able to do it with a locked bootloader -- but you have to do everything just right. In my case, first time I flashed from Moto Maxx image to Moto Turbo image, I messed up. I was looking at the example picture more than reading the instructions. But, since I had an unlocked bootloader, so what? Just did it again the correct way, the second time.
In the case of Moto Maxx brick people trying to flash to Moto Turbo, those people had to wait until Lollipop was released for their phones then try to re-flash an image made for their phones -- and HOPE it worked.
Re Unlock
I did the same thing on my xt1254 this is what Beaups told me from sunshine and it worked for me. I did it from terminal emulated on the device and then was ablebto reflash twrp
Beaups (TheRootNinja Support)
Dec 29, 17:10
tested this on my device and it worked. Keep in mind we can't guarantee it will work for you and also can't guarantee it won't kill your device (but I don't see why it should). Copy paste this command, do NOT make any errors.
From a ROOT adb shell (if you don't have root you'll need to figure out how to get it, kingroot, etc):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/sp bs=1 seek=8
It should hang for a few seconds and then you should see something like:
dd: /dev/block/platform/msm_sdcc.1/by-name/sp: No space left on device
1048569+0 records in
1048568+0 records out
1048568 bytes transferred in 7.203 secs (145573 bytes/sec)
At that point reboot to bootloader and hopefully your problem is solved. Do NOT relock that device again in the future.
--beaups
I tried what you said and I could not, Recovery does not work
A failure occurred when the step system.img_sparsechunk
How did you re-lock your bootloader? What did you do?
pedro_maciel said:
Relocked the bootloader on Droid Turbo/Moto Maxx and again try to unlock the bootloader
C:\adb>fastboot oem unlock
...
OKAY [ -0.000s]
finished. total time: -0.000s
Now this time there is no notification on the phone screen and phone reboots automatically. Now flashing the Android logo from last 5 minute.
Not able to boot in recovery mode. Only fastboot mode is working.
Click to expand...
Click to collapse
tvlovers said:
How did you re-lock your bootloader? What did you do?
Click to expand...
Click to collapse
Before I answer this question, I have to make one thing clear: DON'T EVER DO THIS!
Verizon will still replace your phone under warranty with an unlocked bootloader as long as there is no physical damage. Motorola will do the same. Even if they do decide to get picky about bootloaders, re-locking your bootloader does not erase all traces of it ever being unlocked. Your bootloader will show status code 2, which indicates that it has been unlocked and re-locked again. If you lock it before you sell it to someone else, and they try to unlock it again, the phone will be ruined. There is absolutely no reason to do this.
With that out of the way, the command is "fastboot oem lock"
Don't ever use it.
Thank youfor the warning. I should make it clear before. The reason I was asking was to make sure that no one would accidentally do it as I see no reason to lock it again once unlocked.
Besides that fastboot command is there any other way to accidentally lock it? New VZW OTA software or OEM unlocking under developer options in settings?
Please advise.
TheSt33v said:
Before I answer this question, I have to make one thing clear: DON'T EVER DO THIS!
Verizon will still replace your phone under warranty with an unlocked bootloader as long as there is no physical damage. Motorola will do the same. Even if they do decide to get picky about bootloaders, re-locking your bootloader does not erase all traces of it ever being unlocked. Your bootloader will show status code 2, which indicates that it has been unlocked and re-locked again. If you lock it before you sell it to someone else, and they try to unlock it again, the phone will be ruined. There is absolutely no reason to do this.
With that out of the way, the command is "fastboot oem lock"
Don't ever use it.
Click to expand...
Click to collapse
tvlovers said:
Thank youfor the warning. I should make it clear before. The reason I was asking was to make sure that no one would accidentally do it as I see no reason to lock it again once unlocked.
Besides that fastboot command is there any other way to accidentally lock it? New VZW OTA software or OEM unlocking under developer options in settings?
Please advise.
Click to expand...
Click to collapse
A verizon OTA probably will not, but it's best to wait until someone here confirms that. In the past, they have not, but you never know what they'll try next. The OEM unlock setting in developer options does nothing on a Turbo. It's intended for true dev phones (or phones designed for carriers less tyrannical than Verizon) that can be unlocked and re-locked easily. It disables the "fastboot oem unlock" command that someone with a dev phone would normally use to easily unlock the bootloader. There are no other ways to lock the bootloader that I know of.
bubblesd306 said:
I did the same thing on my xt1254 this is what Beaups told me from sunshine and it worked for me. I did it from terminal emulated on the device and then was ablebto reflash twrp
Beaups (TheRootNinja Support)
Dec 29, 17:10
tested this on my device and it worked. Keep in mind we can't guarantee it will work for you and also can't guarantee it won't kill your device (but I don't see why it should). Copy paste this command, do NOT make any errors.
From a ROOT adb shell (if you don't have root you'll need to figure out how to get it, kingroot, etc):
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/sp bs=1 seek=8
It should hang for a few seconds and then you should see something like:
dd: /dev/block/platform/msm_sdcc.1/by-name/sp: No space left on device
1048569+0 records in
1048568+0 records out
1048568 bytes transferred in 7.203 secs (145573 bytes/sec)
At that point reboot to bootloader and hopefully your problem is solved. Do NOT relock that device again in the future.
--beaups
Click to expand...
Click to collapse
Has anyone that has unlocked using this method been able to flash CM or a CM-based ROM?
Sent from my XT1254 using Tapatalk
richii0207 said:
Has anyone that has unlocked using this method been able to flash CM or a CM-based ROM?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
This isn't unlocking for a first time. This is unlocking for a second time.
Typically when you unlock a bootloader you can relock and unlock easily in adb.
For our device this is not the case and it should never be relocked.
A few have and have always succeeded with those commands.
Again this is only for a previously unlocked boot loader.
Sent from my DROID Turbo using XDA-Developers mobile app
mrkhigh said:
This isn't unlocking for a first time. This is unlocking for a second time.
Typically when you unlock a bootloader you can relock and unlock easily in adb.
For our device this is not the case and it should never be relocked.
A few have and have always succeeded with those commands.
Again this is only for a previously unlocked boot loader.
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
Ya. I did unlock, relock, then unlock again. I am able to install TWRP, and use CF ROM with no issues but if I install CM, I get data but NO voice which is very odd.
Reflashing radios and messing with the network configurations did not help.
I've seen people that have unlocked twice and are able to run CM without any issues.
I've tried reflashing firmware, Reflashing SU38 and OTAing to 44 to no avail. I used to run CM before I relocked without a problem.
Although I do get errors flashing GPT partition, it says that it flashes backup GPT instead of primary.
Sent from my XT1254 using Tapatalk
richii0207 said:
Ya. I did unlock, relock, then unlock again. I am able to install TWRP, and use CF ROM with no issues but if I install CM, I get data but NO voice which is very odd.
Reflashing radios and messing with the network configurations did not help.
I've seen people that have unlocked twice and are able to run CM without any issues.
I've tried reflashing firmware, Reflashing SU38 and OTAing to 44 to no avail. I used to run CM before I relocked without a problem.
Although I do get errors flashing GPT partition, it says that it flashes backup GPT instead of primary.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Is it possible you're not doing a full wipe? What version of twrp are you flashing with?
Sent from my DROID Turbo using XDA-Developers mobile app
mrkhigh said:
Is it possible you're not doing a full wipe? What version of twrp are you flashing with?
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
I realized that I can only make calls when VoLTE is enabled on stock. If I turn it off, I cannot make any phone calls but can access data still. I went into diagnostic mode and it showed " Phone ICCID compare with sim CCID error" with "UNKNOWN" under Phone ICCID. Hmmm..