Problem turning back to any stock rom - Android One (Second-Generation) General

Hello Ma'am/Sir,
I'm having problems whenever I turn back my Android One G1 from CM to any STOCK ROMS, I'm not having problems during flashing any STOCK ROMS, It will successfully flash the zip file, but when I reboot my phone, the Boot Animation will show, then a few minutes later it will "hang" then it will reboot again then the boot animation will show again then it will "hang" again and again and again .. what could be the problem ? please someone help me ..

JanCandia said:
Hello Ma'am/Sir,
I'm having problems whenever I turn back my Android One G1 from CM to any STOCK ROMS, I'm not having problems during flashing any STOCK ROMS, It will successfully flash the zip file, but when I reboot my phone, the Boot Animation will show, then a few minutes later it will "hang" then it will reboot again then the boot animation will show again then it will "hang" again and again and again .. what could be the problem ? please someone help me ..
Click to expand...
Click to collapse
You didn't mention whether or not you did a factory reset too (wipe data and cache), that's a must if you are switching ROMs.

arvinquilao said:
You didn't mention whether or not you did a factory reset too (wipe data and cache), that's a must if you are switching ROMs.
Click to expand...
Click to collapse
I did too, that is a given step in every roms anyway ..

JanCandia said:
I did too, that is a given step in every roms anyway ..
Click to expand...
Click to collapse
which stock rom did you flashed can you send a link?
You know you're still out of warranty and you can't get updates even if you flash a custom rom in TWRP. You have to use fastboot way to get it again

Use official rom link

[thread closed]

Related

need urgent help ...

Hey.
i just s-off'd my phone, rooted it and all that fun stuff. Now when i tried to flash [ROM][Sept26][INC S]Virtuous Unity 2.39.0 Sense 3.0 Based on Pyramid. everything went well, until the installation was finished. It just stopped on the bootlogo HTC. and nothing. been this for the last 30 minutes or so. what to do ? can i pull the battery and it might boot up correctly?
EDIT:
okey, pulled the battery, managed to backup and restore. question is, will it work if i try again? hahah- im to afraid to try-
Thanks
Robin
Frantiic said:
Hey.
i just s-off'd my phone, rooted it and all that fun stuff. Now when i tried to flash [ROM][Sept26][INC S]Virtuous Unity 2.39.0 Sense 3.0 Based on Pyramid. everything went well, until the installation was finished. It just stopped on the bootlogo HTC. and nothing. been this for the last 30 minutes or so. what to do ? can i pull the battery and it might boot up correctly?
EDIT:
okey, pulled the battery, managed to backup and restore. question is, will it work if i try again? hahah- im to afraid to try-
Thanks
Robin
Click to expand...
Click to collapse
From recovery mode did you wipe data, cache and dalvik cache before you flashed the ROM? Also which recovery did you install after you S-OFF?
Did you see this note on the Original Post of the ROM:
Important Notes
If you are experiencing random freezes and/or reboots, this is likely due to your device being incapable of handling our overclocking defaults. Download and apply this flashable patch, which will reduce the maximum CPU frequency to 1Ghz and likely eliminate this issue.
You must complete a full wipe prior to installing this ROM the first time. We also recommend wiping between upgrades, but you are welcome to try upgrading without a wipe. However, no support will be provided if you file a bug without having wiped prior to submission.
Also, did you follow all of the steps that were listed in the second post?
thanks for the respons.
I used revolutinory.io to do everything.. i did wipe and all that, but still had the problem. i downloaded the patch in the topic, but how do i install it ? transfer it to my sd card and run it from the phone ? and then flash the rom?
thanks
tpbklake said:
From recovery mode did you wipe data, cache and dalvik cache before you flashed the ROM? Also which recovery did you install after you S-OFF?
Did you see this note on the Original Post of the ROM:
Important Notes
If you are experiencing random freezes and/or reboots, this is likely due to your device being incapable of handling our overclocking defaults. Download and apply this flashable patch, which will reduce the maximum CPU frequency to 1Ghz and likely eliminate this issue.
You must complete a full wipe prior to installing this ROM the first time. We also recommend wiping between upgrades, but you are welcome to try upgrading without a wipe. However, no support will be provided if you file a bug without having wiped prior to submission.
Also, did you follow all of the steps that were listed in the second post?
Click to expand...
Click to collapse
Frantiic said:
thanks for the respons.
I used revolutinory.io to do everything.. i did wipe and all that, but still had the problem. i downloaded the patch in the topic, but how do i install it ? transfer it to my sd card and run it from the phone ? and then flash the rom?
thanks
Click to expand...
Click to collapse
A patch implies that you flash the ROM and then while still in recovery you flash the patch file and then reboot.
tpbklake said:
A patch implies that you flash the ROM and then while still in recovery you flash the patch file and then reboot.
Click to expand...
Click to collapse
yeah, but when im done with the flashing of the rom, the phone stops and i cant go any further .. thats the problem. but i will transfer it to the sd card and try
Frantiic said:
yeah, but when im done with the flashing of the rom, the phone stops and i cant go any further .. thats the problem. but i will transfer it to the sd card and try
Click to expand...
Click to collapse
Some roms auto reboot after flashing.
Pull the battery, then turn phone on by holding power and volume down at same time. Choose bootloader then recovery.
Now you can flash the patch.
scoobysnacks said:
Some roms auto reboot after flashing.
Pull the battery, then turn phone on by holding power and volume down at same time. Choose bootloader then recovery.
Now you can flash the patch.
Click to expand...
Click to collapse
thanks for the respons.
I do that, but when it says "Done" nothing happens. im stuck at the white background and the green hTC logo ..
Allright. After 6 reboots and recoverys and all that kind of jazz, it worked..

[Q] strange problem

i can go into download mode, recovery mode flashed stock rom, cutom rom etc but my phone is stucked on bootanimation and nothing happens from there.... i tried flashing stock rom via odin rom flashed and device reboot but cant get into homescreen same happens for any custom rom. from yesterday im facing this problem....also tried wipe cache data, factory reset etc...
please help me.
kakagi said:
i can go into download mode, recovery mode flashed stock rom, cutom rom etc but my phone is stucked on bootanimation and nothing happens from there.... i tried flashing stock rom via odin rom flashed and device reboot but cant get into homescreen same happens for any custom rom. from yesterday im facing this problem....also tried wipe cache data, factory reset etc...
please help me.
Click to expand...
Click to collapse
try to flash a firmware which has four files in it , not one package firmware
it worked thanx
kakagi said:
it worked thanx
Click to expand...
Click to collapse
Welcome
also when you get to this situation then just go to recovery and wipe data
what four files package does is it have data.rfs which wipe the data while flashing and no bootloop appears
so actually four files are not compulsary but it will also work without any problem
dhlalit11 said:
also when you get to this situation then just go to recovery and wipe data
what four files package does is it have data.rfs which wipe the data while flashing and no bootloop appears
so actually four files are not compulsary but it will also work without any problem
Click to expand...
Click to collapse
Read his post clearly he had already done it
So i suggested him four files optn

[Q] CM10.1.6 only boots one time

Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
PhurionN said:
Hi, I have flashed many roms in other devices and is the first time it happens to me and i don´t know why.
I flashed the latest firmware via odin then root and cwm, well. When I installed the CM rom with his wipes it boots first time, works perfect, but when i reboot it bootloops, but if do the wipes again it boots first time again but when I reboot bootloop again, any solutions? Thanks.
The Rom I flashed is this (winter release) http://forum.xda-developers.com/showthread.php?t=2212438
Click to expand...
Click to collapse
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
BRKsays said:
I can assure you there is nothing wrong with the rom as I have personally used that rom as well as many others. Having said that, I will ask you to do all the necessary steps to install a rom.
1. flash stock via odin.
2. root your phone and flash cwm 5.
3. boot into recovery, do factory reset, cache wipe, dalvik wipe and format system in mounts and storage.
4. check the md5 sum of the rom for it's integrity and then copy it to sd.
5. flash the rom. reboot system.
first boot will take a bit of time. after setting everything reboot. your phone will boot just fine. have patience though. booting may take time. whatever happens, you should not be in bootloop now because rom is okay. good luck:good:
Click to expand...
Click to collapse
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
PhurionN said:
I did it as you said and the rom boots, but when I reboot it goes bootloop and I don´t know why.
Click to expand...
Click to collapse
i am having a similar problem .....i cant install any rom other than ultimatum
Magpir said:
i am having a similar problem .....i cant install any rom other than ultimatum
Click to expand...
Click to collapse
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
PhurionN said:
I solved it flashing CM 10.1 by MaclawStudio, awesome ROM, recomended :laugh:
Click to expand...
Click to collapse
details please .....
Magpir said:
details please .....
Click to expand...
Click to collapse
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
PhurionN said:
Here is the ROM hope you enjoy it : http://maclaw.pl/downloads/#
Click to expand...
Click to collapse
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Magpir said:
ok thanks but my problem is in cm7 , icant install any other rom after flashing the ultimatum.
Click to expand...
Click to collapse
flash a stock firmware via odin then flash a custon rom after rooting and installing cwm, here is a tutorial, I hope this help you: http://forum.xda-developers.com/showthread.php?t=1034145

[Q] wich stock rom ?

hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
problitz said:
hi
i have a galaxy gt-s5830 with android 2.2.1 and i want to download the stock rom but all i see its for androd 2.3 can i use them? or wich one should i use??
Click to expand...
Click to collapse
First upgrade your device to Gingerbread using Odin, follow this guide
hubix's guide
Then root your device and install CWM (custom recovery) in order to flash custom roms, doing backups, flash mods ... here you'll find all
Usefull Thread with lots of info and FAQ
Finally choose the rom you want and follow the dev's instructions to flash the selected rom
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
problitz said:
thx a lot just one more question in the Newest firmware says vietnam and im from portugal is there any problem with that?
Click to expand...
Click to collapse
The latest fw it's from Vietnam?? umm
There's no problem, but I suggest you to flash an European fw in order to avoid signal/coverage troubles because of each fw includes a modem from a different area. For me the Spanish KTM is the best
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
problitz said:
thx again i can root my phone but following the hubix tuturial trying to flash the newest firmware in odin i only can find the .ops file i cant find the boot and the others... i downloaded all the files e said to download but cant find them in all those files can help me?
Click to expand...
Click to collapse
Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
You can find all the necessary details for flashing as well as all the firmwares in this link. If your PC cannot recognize the phone, its usually the drivers. Once installed, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace (just install these zip from the recovery mode),
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
You can use the single firmware installation. No need to download files like boot, pda, etc separately. Also you can download the firmware near to your region. Hope I Helped
thx that help a lot just missing the firmware for portugal to be perfect
problitz said:
thx that help a lot just missing the firmware for portugal to be perfect
Click to expand...
Click to collapse
Glad I could help
SamMobile
problitz said:
Just missing the firmware for Portugal to be perfect
Click to expand...
Click to collapse
Download It From SamMobile.com :laugh::victory::highfive:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
problitz said:
i did it and intalled this custom rom http://forum.xda-developers.com/showthread.php?t=2635011 i like it but when i shutdown my phone and turn on again it gets stuck in the samsung logo and restars all the time i have to wipe the cashe for it to start normaly wath is this can i solve this? and wath is the more stable custom rom?
thx
Click to expand...
Click to collapse
Before you do any of these things, make sure to backup you apps. Go to CWM and do "Wipe data/ factory reset" and "Wipe Cache partition". Also go to Mount and Storage> Format /system. Finally Advanced> "Wipe Dalvik Cache" and "Wipe Battery Stat". Now reinstall the rom again. It might solve the issue. As for the stable custom rom, you can always go with CM 7 i.e. Android 2.3.7 based roms. CM 7 based roms are much stable than CM 9, CM 10 and CM 11 roms. As per xda rules, I cannot suggest you the best rom. But here is list of all roms for our Ace. You can flash this yourself to decide which is the best. Here is the link,
Know your Device:Galaxy Ace GT-S5830 ~Root~Odin~CWM~ROM LIST
Hope I Helped
i did that but still have the same problem i get a light blue screen and black and it just restarts i really liked this rom
i will try other thx anyway for the rom list
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
problitz said:
i installed the stock rom but after that it just wont start i had to install the custom rom and do wipe cache again for it to start
Click to expand...
Click to collapse
Once you have installed the stock rom, go to recovery mode and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur).
i did but still same problem
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
problitz said:
if i only restart the phone this doesnt happen, only when i shut it down i cant understand this and its so annoying
Click to expand...
Click to collapse
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i think i have done that already but im not sure my phone is charging i will download another stock rom to try it then i will post the results thx
Viper The Ripper said:
after flasing a stock rom via Odin, do wipe factory/reset and wipe cache in order to avoid the bootloop, but with CM10.x ROMS NEVER DO WIPES (data factory/reset) OR YOU'LL BREAK THE BOOT!!
To fix it do all the wipes and reflash the CM10.x rom following dev's thread
Click to expand...
Click to collapse
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
problitz said:
i did it all twice the stock rom all good installed the custom rom all good shut the phone down same problem again...
but if i shut down the phone and start with the CWM and just select reboot system now it starts without loop i cant understand this
Click to expand...
Click to collapse
Might be the problem with the custom rom. Try installing some other custom rom and see if the problem persists. Do post the result. Hope I Helped

Flashing other roms than Andro X doesn't work

I just updated my bootloader and whenever i try to flash a rom, the booting process takes forever until i wipe my phone myself. But when i flash Andro X rom than it takes max. 3min to boot and then it works.
But i want another rom, how do i fix this?
Do you mean that when u flash lollipop based rom it gets bootloop? if yes then first flash stock lollipop firmware and then try flashing other rom. I mostly wipe my internal storage when going from Kitkat to lollipop it works for me.
Well Firstly Explain your problem clearly (I didnt quite understand it)
OK so here's my solution from what I understood..
1. Restore your stock rom Backup from recovery. Boot it once.
2. Now clean flash (Wipe System, Data , Cache, Dalvik cache) a lollipop based Rom (preferably try to clean flash cm 12.1 build)
3. Dont flash Gapps. First see if your phone boots up properly.
4. Configure data and reboot to recovery and flash Gapps.
If you dont have a Stock backup, Then download Stock Firmware images from gregor's thread and install via fastboot. Then follow from step2.
Hope this helps you.
Haroun16 said:
I just updated my bootloader and whenever i try to flash a rom, the booting process takes forever until i wipe my phone myself. But when i flash Andro X rom than it takes max. 3min to boot and then it works.
But i want another rom, how do i fix this?
Click to expand...
Click to collapse
Use easy installer first and get stock lollipop then u can simply root and install recovery then try roms?
sagar846 said:
Well Firstly Explain your problem clearly (I didnt quite understand it)
OK so here's my solution from what I understood..
1. Restore your stock rom Backup from recovery. Boot it once.
2. Now clean flash (Wipe System, Data , Cache, Dalvik cache) a lollipop based Rom (preferably try to clean flash cm 12.1 build)
3. Dont flash Gapps. First see if your phone boots up properly.
4. Configure data and reboot to recovery and flash Gapps.
If you dont have a Stock backup, Then download Stock Firmware images from gregor's thread and install via fastboot. Then follow from step2.
Hope this helps you.
Click to expand...
Click to collapse
My problem is that when i try to flash roms like CM12, Blisspop it doesn't stop booting, it was taking more than an hour so i shutdown my phone and when i flashed Andro X the booting took around 3mins.
So can anyone explain in easy steps how to fix this?
OK now I understand what your problem is. Give me your full specs (like which Model and and stuff). But if you follow what I said above it might fix your problem.
sagar846 said:
OK now I understand what your problem is. Give me your full specs (like which Model and and stuff). But if you follow what I said above it might fix your problem.
Click to expand...
Click to collapse
I got the XT1068
Haroun16 said:
I got the XT1068
Click to expand...
Click to collapse
are you fully wiping cache and userdata (factory reset) because this is most common problem moving between Roms that causes bootloops and why I include factory reset in my easy installer.
you can only dirty flash when going up (upgrading) the same rom - changing roms or downgrading nearly always causes bootloop / hang.

Categories

Resources