Database Develop

[Q] explanations of the files in Moto X roms?

Hi, I'm new to Moto Android phones and want to know what does the files in moto roms and what are these steps mean. Any expert can help explain? Thank you very much!!!
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear

[Q] Back to stock from NX5CM (XT1052)

Hi guys
i'd like to go back to stock from NX5CM and i have a XT1052.
Should a just do:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
I'd like to flash stock 4.4.4 XT1052
thanks guys!

just did it like i wrote above, it worked just fine

Not any different from the return to stock guide. Not sure why you thought your X would be any different.

i would consider skipping... fastboot oem config carrier vzw since you don't have a Verizon device.
Also, consider using mFastboot instead of fastboot for all commands.

daede86 said:
just did it like i wrote above, it worked just fine
Click to expand...
Click to collapse
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!

bryan.huang said:
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!
Click to expand...
Click to collapse
Check here http://sbf.droid-developers.org/phone.php?device=0

bryan.huang said:
Could you please tell me where you downloaded the xt1052 4.4.4 stock firmware? Thanks!
Click to expand...
Click to collapse
See -> http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347 it has several places to look

daede86 said:
Hi guys
i'd like to go back to stock from NX5CM and i have a XT1052.
Should a just do:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
I'd like to flash stock 4.4.4 XT1052
thanks guys!
Click to expand...
Click to collapse
Can u try RSD lite directly there no problem i was using rsd for my moto x.

base band version unknown

i have flashed my xt 1092, with the stock rom available on the motorola firmware
and now after flashing the baseband version of the phone is unknown also the imei number is erased.

tuntun_s said:
i have flashed my xt 1092, with the stock rom available on the motorola firmware
and now after flashing the baseband version of the phone is unknown also the imei number is erased.
Click to expand...
Click to collapse
Did the same thing.. Had to send it in because at the time there was no German stock firmware.. There is one now. Try to flash that.

tuntun_s said:
i have flashed my xt 1092, with the stock rom available on the motorola firmware
and now after flashing the baseband version of the phone is unknown also the imei number is erased.
Click to expand...
Click to collapse
i have the same problem,did you sovled it?

some one is wid me ... thanks
lzloob said:
i have the same problem,did you sovled it?
Click to expand...
Click to collapse
No yaar
If u solve then say me too

If efs data got wiped I think you are out of luck. With no imei, efs probably did get erased.

tuntun_s said:
No yaar
If u solve then say me too
Click to expand...
Click to collapse
hah, i find a xt1092 stock firmware , and then flash it . it works well.
download RETESALL_XT1092_4.4.4_KXE21.187-42_cid7_CFC.xml.zip(google it) and unzipped
use fastboot tools to flash
Command:
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot

system.img_sparsechunk.2
lzloob said:
hah, i find a xt1092 stock firmware , and then flash it . it works well.
download RETESALL_XT1092_4.4.4_KXE21.187-42_cid7_CFC.xml.zip(google it) and unzipped
use fastboot tools to flash
Command:
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Click to expand...
Click to collapse
System.img_sparsechunk.2
Bro can u upload please .... Its Corrupted in my dowload please bro
Please please .....please ... I hv tried it but its again corrupted ... Please upload your sparsechunk.2 ... Thanks in advance .. Please

tuntun_s said:
System.img_sparsechunk.2
Bro can u upload please .... Its Corrupted in my dowload please bro
Please please .....please ... I hv tried it but its again corrupted ... Please upload your sparsechunk.2 ... Thanks in advance .. Please
Click to expand...
Click to collapse
because i'm a new member on xda, i can not reply the download link directly, so i pm you the link. and then you can share with others who need it.

tuntun_s said:
System.img_sparsechunk.2
Bro can u upload please .... Its Corrupted in my dowload please bro
Please please .....please ... I hv tried it but its again corrupted ... Please upload your sparsechunk.2 ... Thanks in advance .. Please
Click to expand...
Click to collapse
If your IMEI is not appearing, the only steps that would way more than likely restore it are:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
You don't need all the other ones. By the way, that IMG is for Spain, which is ES.

lzloob said:
hah, i find a xt1092 stock firmware , and then flash it . it works well.
download RETESALL_XT1092_4.4.4_KXE21.187-42_cid7_CFC.xml.zip(google it) and unzipped
use fastboot tools to flash
Command:
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Click to expand...
Click to collapse
hey bro did you recover your imei and baseband

Unable to Relock Bootloader and SIM card NOT READING error on MOTO X 2014 AT&T XT1097

Unable to Relock Bootloader and SIM card NOT READING error on MOTO X 2014 AT&T XT1097
i have unlocked bootloader on my moto X 2014 (canada variant) XT1097 and status code : 3
after flashing stock roms & many attempts to relock the bootloader but no luck to lock my phone bootloader
with this cmd in the fastboot mode.
{
fastboot oem lock
(bootloader) FAIL: Please run fastboot oem lock begin first!
(bootloader) sst lock failure!
} (this statment also shows to flash any signed img (i dont know what it means))
as well as while i am flashing rom i got this errors
{
hab check failed for recovery
hab check failed for boot
} in pink colour
my phone is unable to read sim card (NO Network)
can anyone suggest any solution.

maninder.email said:
i have unlocked bootloader on my moto X 2014 (canada variant) XT1097 and status code : 3
after flashing stock roms & many attempts to relock the bootloader but no luck to lock my phone bootloader
with this cmd in the fastboot mode.
{
fastboot oem lock
(bootloader) FAIL: Please run fastboot oem lock begin first!
(bootloader) sst lock failure!
} (this statment also shows to flash any signed img (i dont know what it means))
as well as while i am flashing rom i got this errors
{
hab check failed for recovery
hab check failed for boot
} in pink colour
my phone is unable to read sim card (NO Network)
can anyone suggest any solution.
Click to expand...
Click to collapse
If you're using your ATT XT1097 with a Canadian carrier, then you need to flash the VICTARA_RETCA_XT1097_6.0 firmware:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Every single line, so that ALL files are stock. There's no advantage to relocking the bootloader, you won't get warranty back. But try relocking it after flashing the full factory firmware.

Gus Ghanem said:
If you're using your ATT XT1097 with a Canadian carrier, then you need to flash the VICTARA_RETCA_XT1097_6.0 firmware:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Every single line, so that ALL files are stock. There's no advantage to relocking the bootloader, you won't get warranty back. But try relocking it after flashing the full factory firmware.
Click to expand...
Click to collapse
yahoo! Phone is able to read my Wind sim card and i am able to make phone calls.
Thanks Gus Ghanem
I really appreciate your help
i followed your instructions.

maninder.email said:
yahoo! Phone is able to read my Wind sim card and i am able to make phone calls.
Thanks Gus Ghanem
I really appreciate your help
i followed your instructions.
Click to expand...
Click to collapse
You're welcome! I'm glad it's working

Which stock firmware do I need to use for my XT1900-1 model X4?

I have a XT1900-1 that says "android one" on bootup and has the following in the system information FCC ID idht56wk1, software variant: google_fi, software channel:retus and I am trying to find out which firmware from here I need. I got the phone from Credo Mobile which uses the Sprint network if it makes a difference.

nl3142 said:
I have a XT1900-1 that says "android one" on bootup and has the following in the system information FCC ID idht56wk1, software variant: google_fi, software channel:retus and I am trying to find out which firmware from here I need. I got the phone from Credo Mobile which uses the Sprint network if it makes a difference.
Click to expand...
Click to collapse
XT1900-1_PAYTON_FI_9.0_PPWS29.69-26-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
flash with
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash logo logo.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear

ptn107 said:
XT1900-1_PAYTON_FI_9.0_PPWS29.69-26-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
flash with
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash logo logo.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
And to update when a new security update comes out I just remove "fastboot flash partition gpt.bin" and "fastboot erase userdata" lines from what you posted above before flashing it and then after the update is installed reinstall twrp and magisk, right? Since once twrp and magisk are installed OTA updates don't work.