Database Develop

[Q] GT-N7000 Stuck in loop at Samsung splash (boot screen)

I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.

TXBrnNRaised said:
I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.
Click to expand...
Click to collapse
Go to recovery and wipe cache and format data and reboot.

I can access Download (Odin) mode. No custom ROM was installed, just stock ROM that I could later root. Reads as follows:
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: SAMSUNG OFFICIAL

Found Chainfire's post in the SGSII forums about TraingleAway. I just used the param.tar file for PDA in PC Odin and now I can boot again.
FYI I had tried using Q1_20110914_16GB.pit and a stock ROM in PC Odin and the re-partition function with no luck prior to this.
All is well. Thanks to Chainfire a.k.a. one of XDA's greatest members.

Now trying to work around the 'logo_q1.jpg' draw failed issue. Found post here. Hopefully it works.

Resolved. Flash back to a stock ROM using PC Odin.

please help
Okay.. So my phones on bootloop and ahh i dunno what to do..
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : YES (2 COUNTS)
CURRENT BINARY : CUSTOM
What should i do? im so lost..please..someone..

try flash full wipe firmware
phone+csc+pda
prefarably GB
And let us if that sort u out

It's been a while but I believe I had to use PC Odin and do as ac-milan is suggesting. Find a stock ROM (I thinK I used a Carphone one) and flash phone+csc+pda. Might try the param.tar file under PDA too. Can't remember if I tried it solo or with other files. Trial and error.

Freeze on SGS3 logo

Hi
A friend has flashed the following CF-Root "CF-Root-SGS3-v6.4.tar" by mistake.
Then... stuck on Samsung's logo and "Galaxy SII" appears. He tried to flash via Odin the firmware I8190XXALK6 - Novembrer, 2012 but the problem still remains.
The Download mode is available but not the Recovery mode.
What can he do to solve this issue?
Thanks for your precious help! Don't hesitate to ask me for further information.
Galaxy SIII Mini
Android 4.1.1
GT-I8190

Flash the attached file in pda.

Thanks for your help.
I'm goign to transfer that file to my friend.
I'll keep u informed.

The phone boots without any issues except that the SGS II logo is still here.
A new flash through Odin could solve it?
Thanks again.

try to flash full firmware.

Have you Full Firmware (pda, csc,modem)?

http://www.hotfile.com/dl/181522827/74b9c77/I8190XXALK6_I8190XEFALK1_XEF.zip.html

are the 3 Files?

one file include all.

where add this file?
I have a bad flash and i now it is my internal sd not as should be.
I wanted all files for my phone for Odin (Pit file, Modem, CSC)
.

there is not pit file.
just put the tar file inside zip in pda and flash.

My mistake.
the boot logo not include in firmwares, i made one for u.
it shold work.

Memphis_ said:
The phone boots without any issues except that the SGS II logo is still here.
A new flash through Odin could solve it?
Thanks again.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35135484#post35135484

you are my hero :victory:

Thanks avicohh
I've just transfered your link to my friend.

Soft-bricked galaxy s

Today i tried to flash the galaxy sii firmware port on my galaxy s which was running cm10.1 When i installed it, it got to the opening package in recovery, the phone rebooted and now keeps rebooting and never passes the galaxy s/cynaogenmod logo
I can't enter recovery anymore, only download mode. Can someone post me some links with odin + the right pit file for flashing 2.3.6 stock firmware from sammmobile?

NimeniAltu said:
Today i tried to flash the galaxy sii firmware port on my galaxy s which was running cm10.1 When i installed it, it got to the opening package in recovery, the phone rebooted and now keeps rebooting and never passes the galaxy s/cynaogenmod logo
I can't enter recovery anymore, only download mode. Can someone post me some links with odin + the right pit file for flashing 2.3.6 stock firmware from sammmobile?
Click to expand...
Click to collapse
check it out --> http://forum.xda-developers.com/showthread.php?t=2434225
here you'll find everything you need.

[need help] galaxy note brick,custom binary count

hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:

mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...

mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app

NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do

hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:

mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.

ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image

How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?

ENter all the 3 files without PIT! and tell again!

Was scammed and bought bricked SM-G925A. Won't boot into recovery mode.

ODIN MODE
PRODUCT NAME: SM-G925A
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 0 (0X0000)
AP SWREV: B: 4 K: 3 S: 3
Good evening,
First time poster long time reader/browser. Before posting this message I have read all other posts/threads in an attempt to fix this issue. Long story short I busted my old Samsung Galaxy S6 Edge SM-G925A AT&T and bought this one used online. The seller never mentioned it was bricked as all pictures posted of it showed it operating and at least booting up. When I received phone I turned it on and it is stuck in a boot loop. I have tried to boot in recovery mode by pressing VOL UP+HOME+POWER button and it does nothing. I am only able to boot into download mode. I have attempted to flash multiple stock firmwares which 3 have been successful and passed in ODIN, however once they pass and the phone reboots it is still stuck in a boot loop. I have been successful in flashing the below firmwares. I do not know anything about the phone besides the IMEI number, S/N, SKU and manufactured date. I do not know what firmware was on the phone originally and do not know what was flashed on phone when I received it (I'm assuming phone was flashed or rooted before due to the above stating SYSTEM STATUS: CUSTOM) Am I stuck with a bricked phone? I've attempted flashes with PIT Files, w/o PIT FILES, with just the AP file, with all 4 BL, AP, CP and CSC files and each time it gets in a bootloop. Can someone please assist me? I've read that sometimes all is needed is to wipe the cache in recovery mode and that would clear bootloop, but I cannot get into recovery mode. Any suggestions. Again, below are what I've flashed successfully but continues to bootloop. Thank you all in advance.
G925AUCS5DPJ1--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
G925AUCU3BO12--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
G925AATT3BOJ7--SUCCESSFUL ODIN FLASH-STILL BOOTLOOP
I will say after flashing the DPJ1 files I can no longer flash the BL file for either of the 2 firmwares below it (the AP, CP and CSC files all still flash successful).
I'm just about to give up and shell out the money and buy new phone. Was just hoping someone on here could provide me some advice, some sort of miracle file or a way I can odin flash a tar/md5 file that will wipe my cache/system cache like it would as if you did it in recovery mode.
OH! Also Samsung Smart-Switch will not recognize the phone. I'm able to input the model name and S/N in the emergency software initialization but as soon as I input the S/N and click ok it immediately crashes and closes out Smart-Switch. Thanks Guys!
Paul

You need to find a Marshmallow odin file. The phone has most like;y already been updated to Marshmallow in the past. Once on MM, you cant go back to Lollipop which is what those 3 files you listed are.
Edit, NM....that PJ1 file is marshmallow. Try taking it to Best Buy and having them reflash it with the latest MM file.

Thank you, I will try that. I have tried taking to AT&T but they wouldn't help at all. They said since I'm not AT&T customer then I'd have to go thru Samsung. I'm aggravated. I've been working on this off and on for 3 months now. Thanks again for the reply. I've read a lot of people saying after wiping cache partition and rebooting it fixed bootloop after successful flash.
You said I could go back to Lollipop. If I use anything other than the 3 files I listed Odin will fail with various,
Secure Check fail message. Do you know if anyone has created a Odin file that will successfully wipe the cache partition like it would via system recovery?
Thanks again for the reply.

Any updates on this ? I'm having the same issue with my G925I.

why don't you try to flash the DPK5 update from ODIN in the nougat update thread. that's the latest ODIN file I think

saketkutta said:
why don't you try to flash the DPK5 update from ODIN in the nougat update thread. that's the latest ODIN file I think
Click to expand...
Click to collapse
No matter what I flash , it's always stuck on the s6 edge logo.. And I can't enter any recovery be it stock or custom recovery. All I can do is enter download mode and flash official ROMs but none seem to work.

Thats some unfortunate situation. I don't know what to do. If official roms don't boot then it's permanent brick I think. Any senior devs know what to do?
Sent from my SAMSUNG-SM-T337A using Tapatalk

I am suffering from the similar fate,, its a friend mobile whose stuck on Samsung logo, he tried to fix it with Kies and Smart Switch and it did not workout for him.
The phone does not boot into recovery. I tried flashing G925AUCU1AOCE and G925AUCU3BOJ7 stock firmwares but no luck.
I successfully flashed G925AUCU6EQCF but it is still stuck on Samsung Logo
Any help or suggestion would be welcome
edit 3rd: Ok now I have managed to flash G925AUCS5DPJ1, still it won't boot into recovery and it is looping to Samsung logo

Same for me ... The recovery is not accessible and the phone reboots in a loop, Smart Switch tell me that the S / N does not match the phone model ...