Database Develop

[PROBLEM SOLVED]Odin keep failed

I was trying to root my galaxy note, I download the rooted stock rom (N7000DXLC2) from here http://forum.xda-developers.com/showthread.php?t=1535025
but the odin failed and showing this
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000DXLC2.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000OLBLC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then my phone can't boot anymore, it jus stuck at the samsung n7000 screen,
i tried to download stock rom and flash again, but it failed like above,
and when i go try to flash the kernel, it success to go to the recovery mode,
but it showing error like
E:Error in /cache/recovery/sec_csc.zip (status 7)
And i maybe forgot to enable usb debugging before i root, is this the cause? how i enable it now?
what can i do now? I tried to change port, change pc, uninstall kies, reinstall driver, close antivirus, and all doesn't work, please help...

To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and setting it in the options anyway.

bioweb said:
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and set it in the options anyway.
Click to expand...
Click to collapse
I tried that, and I uninstalled the kies,
but the odin still showing the same error.

PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......

17n337 said:
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
Click to expand...
Click to collapse
CAUTION : Just dont go on blindly flashing the PIT file. Its a repartitioning file. To be used only when your partition is corrupted.

Galaxy Note stuck
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???

vinay28761 said:
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
...
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but
...
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
...
Can anyone explain my current situation...???
Click to expand...
Click to collapse
First: this thread is marked as solved since april. Chances are very low for a reaction (but at least I did)
Second: Make a new one in Q&A
Third: What do you mean with "Took the TB"? Especially when you flash a new Stock Rom after
Fourth: Did you put the tar-file under "Phone"? Should be "PDA".
Fifth: Read a lot in the stickies here - good start for handling Odin is Dr. Ketan's thread
Sixth: your current situation might result from not reading enough. I hope you didn't brick your device and can restore a running Rom with the instructions from the stickies. Good Luck

how exactly did you reach this situation?

Did you resolve this ?
vinay28761 said:
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
Click to expand...
Click to collapse
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?

dannyogolo said:
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
Click to expand...
Click to collapse
Yes, i resolved it. I just followed dr. ketan's guide to flash through ODIN properly and exactly as described. I would request you to do the same.
Hope it solves your error too. If not, please post your screenshots.

could you jst give me details about dis nand write fail problem?i m having same problem in my gt n7000

Does anyone know where i can download PIT file for samsung gts6802 and a bootloader?
It woulb be very helpful. Thank You

[SOLVED] Can't install for latest CWM recovery and CM

Hello all, I'm new.
Last night, I've already flashed to ClockworkMod recovery (5.8.1.8) after following the instruction from wiki, then I formatted all for data, cache, preload and sdcard (except emmc), and then also I tried to download latest version of ClockworkMod recovery and CyanogenMod stable or nightly builds for her Samsung Galaxy Note (GT-N7000) phone.
The biggest problem before I tried to install for stable or latest nightly builds of CyanogenMod, but it doesn't work due for asserting failure (the console log shows 'assert failed: getprop("ro.product.device") == "galaxynote"') as in status 7 of error.
And then, I can't install for latest ClockworkMod recovery while freezes and the message says "Replacing stock recovery with ClockworkMod recovery".
I need to teach for how to install, but could you please help me?
(Note: Sorry for bad English, but I could not understand anymore.)

You can't install recovery directly.. You need to use a custom kernel like Philz or Speedmod. Then you can go about cleaning and wiping.

nokiamodeln91 said:
You can install recovery directly.. You need to use a custom kernel like Philz or Speedmod. Then you can go about cleaning and wiping.
Click to expand...
Click to collapse
I've already cleaned and wiped for her's phone, and then I tried to install for latest Philz' CWM recovery, but what happens... it doesn't work.
So here is the recovery console log.
Code:
This package is for 'galaxynote,n7000,N7000,GT-N700' devices; this is a ''.
E: Error in /emmc/philz_touch_6.07.9-n7000.zip
(Status 7)
Installation aborted.

GrandChaos9000 said:
I've already cleaned and wiped for her's phone, and then I tried to install for latest Philz' CWM recovery, but what happens... it doesn't work.
So here is the recovery console log.
Code:
This package is for 'galaxynote,n7000,N7000,GT-N700' devices; this is a ''.
E: Error in /emmc/philz_touch_6.07.9-n7000.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
I meant to say you CANT install recovery directly.
If that does not work then use Philz kernel that's is a tar.md5 file and use Odin to flash on PDA.

Flash philz ((kernel)) from this thread:
http://forum.xda-developers.com/showthread.php?t=1901191
Then you're good to go.

nokiamodeln91 said:
I meant to say you CANT install recovery directly.
If that does not work then use Philz kernel that's is a tar.md5 file and use Odin to flash on PDA.
Click to expand...
Click to collapse
I switched to Windows 7 after boot selection (I have a triple boot with my Debian-based distro, Ubuntu and Windows 7), running/downloading older to latest Odin3, power on to download mode, and then connect into my computer, but it won't appear in the yellow box of USB ID COM after installed/replaced the drivers from zadlg.

Anyone?

GrandChaos9000 said:
Anyone?
Click to expand...
Click to collapse
try installing driver from here.. Once installed connect the phone in normal power on mode and then let windows install the drivers...

nokiamodeln91 said:
Once installed connect the phone in normal power on mode and then let windows install the drivers...
Click to expand...
Click to collapse
Okay... but now what?

GrandChaos9000 said:
Okay... but now what?
Click to expand...
Click to collapse
Then boot into download mode and flash Philz kernel from there... Philz tar.md5 file selected in PDA and phone in download mode.

nokiamodeln91 said:
Philz tar.md5 file selected in PDA and phone in download mode.
Click to expand...
Click to collapse
Is it both all in PDA and phone before installing?

GrandChaos9000 said:
Is it both all in PDA and phone before installing?
Click to expand...
Click to collapse
It is just in PDA, he is saying to put the phone in download mode by pressing volume down+power+home button to be able to do that.

PDA and phone won't install due in the red box of failure, so here is my log.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: I've removed anti-virus and Kies (except for mobile drivers), but it failed again.

Anyone how to resolve this?

It seems you keep flashing PhilZ recovery. Don't do that. You need to flash PhilZ kernel which inlude recovery in it. Download from here latest one.
http://forum.xda-developers.com/showthread.php?p=31911620
Sent from my GT-N7000 using Tapatalk 2

U come from where? Gingerbread/ics/jb n what baseband u use
Phone status
Gingerbread
Ics
Jb?
Baseband?
Make sure philz kernel is compatible u device
GrandChaos9000 said:
PDA and phone won't install due in the red box of failure, so here is my log.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

AMUK0110 said:
Phone status
Gingerbread
ICS
JB?
Baseband?
Click to expand...
Click to collapse
Uhm... Jelly Bean 4.1 Stock with apps in Germany about her phone.

U baseband?
Etc
GrandChaos9000 said:
Uhm... Jelly Bean 4.1 Stock with apps in Germany about her phone.
Click to expand...
Click to collapse

AMUK0110 said:
Your baseband?
Click to expand...
Click to collapse
N7000XXLSA in baseband version I guess...

And finally, I installed Philz CWM recovery (Version 5.15.0 - CWM base version 6.0.3.7) and it works for XXLTA-ATL baseband instead.
So here is my another log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)

[Q] Galaxy S5 G900A Stuck In Downloading/Firmware Upgrade Mode

I have searched for about the past 3-4 hours which is a lot longer than it usually takes for me to get to the bottom of these dang things. My phone (Galaxy S5 G900A Lollipop 5.0) has been really screwy on the WiFi lately (home, out in public, family members homes) so I decided (after a factory reset, safe mode, etc failing) to go ahead and try to downgrade my phone. So I went online and found out you can do it with Odin (3.09, 3.10, 3.06) and attempted it. I downloaded a stock 4.4.4 firmware and went to work. Immediately it failed with the error I am still getting which is the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Example of the firmware update screen: Unable to post outside link, just google "firmware update encountered an issue galaxt s5" it's the first image.
Example of the download screen I use with Odin (as instructed): Unable to post outside link, just google "download mode glaaxy s5" it's the first image.
I have attempted using both the old and new version of Kies to perform the emergency and normal firmware update procedures. My phone does not show in the emergency firmware recovery screen and the firmware update mode ends in an error telling me to use the emergency firmware update, which as mentioned does not work.
With Odin I have attempted: Multiple computers, multiple USB ports on each computer, reinstalling Samsung drivers, restarting computer, multiple Odin versions, multiple firmware files (4.4.4, 4.4.2), running as administrator
Windows 8.1
Update on errors: My screen shows the following error on my phone in RED under "UDC Start" when Odin Fails:
SYS REV CHECK FAIL : Refer 2 > Binary 1
SECURE CHECK FAIL : system

You can't downgrade from 5.0. Flash 5.0 and you will be fine. If I'm not mistaken, the new bootloader is not backwards compatible and therefore won't let a downgrade happen.

Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.

daddynexxus said:
Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.
Click to expand...
Click to collapse
You won't be able to downgrade and that was your problem in the beginning

Same issue
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary

Rayman3030 said:
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary
Click to expand...
Click to collapse
Go here and follow direction. Do the last section of the OP.
http://forum.xda-developers.com/showthread.php?p=60012961
Sent from my SAMSUNG-SM-G900A

5.1.1 Bricked after ota update then tried downgrade to 4.4.2

I did something stupid I know and I have looked everywhere and seem to find only info about rooted fixes Here is the steps that now have me brickked:
Started with 4.4.1 Rooted
Flashed via Oden 4.4.2 Stock
Then Did OTA updates to 5.1.1
Tried To Revert to 4.4.2 Stock Via ODEN - Phone Said Firmware Error Load KIES and restore... never worked again
Tried Loading G900A_OC4_Stock_Partitions.tar.md5 got me to Black and white Samsing Logo Nothing Else
I dont care what I get I just need a phone, HELP!!!!!

Flash the 5.0 file and you will be good once you upgrade to lollipop you can't go back to 4.4.4 after upgrading and there is no way to go back after
Sent from my SAMSUNG-SM-G900A using Tapatalk

I have looked for 5.0 files where might I find one?
Tried this G900AUCU3BOC4_OneClick
but it fails and goes to SW REV FAIL : [aboot]Fused 4 > Binary 3
On Oden it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> One Click Downloader Mode
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
ThanksTons!

Since you did OTA updates, your bootloader has been updated and you can NOT revert back to older version. You basically need to reflash 5.1.1 firmware and stay there. Try to restore using Kies application.

LoSt180 said:
Since you did OTA updates, your bootloader has been updated and you can NOT revert back to older version. You basically need to reflash 5.1.1 firmware and stay there. Try to restore using Kies application.
Click to expand...
Click to collapse
Again tried Kies, Kies 3, and the new smart swap, nothing allows me to complete this they all say no repair option available when tools and emergency recovery is selected. Tried initialization and it tried v 4.4.2 which crashes.
HELP!!

You should be able to use ODIN and the link to the 5.1.1 firmware in the top of this post http://forum.xda-developers.com/att...w-to-update-to-g900aoi5-5-1-unrooted-t3235774

Did you figure out what to do? I'm in the same boat. My phone boots to "Firmware Upgrade encountered an issue". Kies does not find the phone. I was on OF3 trying to downgrade to stock ROM. Link posted above does not have ODIN flashable files except for bootloader it seems.
Found out how to go back to working phone by flashing file at the end of first post here (http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652)

Mine still is bricked did anyone have a fix?

This is the OI5 files. Try and see if these work in Odin.
http://forum.xda-developers.com/showthread.php?t=3360699
Sent from my SAMSUNG-SM-G870A using Tapatalk

Only able to go to Download mode and Android Recovery

Ok guys, so I flashed 5.1.1 on my phone but I lost root. So I decided to root using the Skipsoft Toolkit. I think it tried to install a bootloader (pretty sure it did). Before this I tried to use the chainfire root but didnt work. ok So then the phone started boot-looping and I decided to flash 4.4.4 back on. But now Odin keeps giving me this error
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
On the phone side the error I'm getting is this:
Code:
UDC START
SW REV CHECK FAIL : [ABOOT]Fused 2 > Binary 1
[1] eMMC write fail: ABOOT
Idk what to do at this point. I'm assuming I have to flash the boot-loader right?
If I could get some advice, so I don't brick my phone further.
Please please please, help! v__v

If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.

PanchoPlanet said:
If you mean latest 5.1.1 you most likely have updated Samsung kernel security that won't let you downgrade bootloader, you need to flash current stock firmware to recover your device.
Pp.
Click to expand...
Click to collapse
I tried flashing 5.1.1 But to no avail. Anything else I could do?

I had a similar problem with my note 3. What in did was I backed up my sd card and wiped it, redownloaded stock bootloader and firmwares, and used a different usb cable and port . Then odin worked like charm

My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.

ChameleonQS said:
My friend ended up putting 4.4.4 on it somehow. Maybe it was just an issue with my computer? Thank you guys for your suggestions btw. I tried all of them.
Click to expand...
Click to collapse
Do you happen to have the link to the 4.4 build? I'm trying to downgrade from 5.1.1 as well