Related
Currently on VZN, XT1060, MotoX, DEV unlocked bootloader, TWRP, SuperSU:
version: 4.4
kernel: [email protected]#1
system: 140.45.5.ghost_verizon.Verizon.en.US
build: 13.11.1Q2.X-69-3
NO ROM And I only changed two items:
1. VzwEntitlementService.apk via [http://forum.xda-developers.com/showthread.php?t=2536166] by changing the originalVzwEntitlementService.apk to VzwEntitlementService.apk.bak
2. Remove bootloader warning image
Question: for the 4.4.2 update (hopefully coming soon)
1. Can I just get the 4.4.2 update via OTA with my current setup
2. Or do I have a to flash back to stock
Thank you much.
and I'm new to xda.
you need to flash the stock recovery and then run the OTA. after it installs flash your custom recovery back.
dray_jr said:
you need to flash the stock recovery and then run the OTA. after it installs flash your custom recovery back.
Click to expand...
Click to collapse
Thanks, if someone has an unlocked bootloader but is not rooted and they removed the bootloader unlocked message using the command:
fastboot flash logo logo.bin
and used a logo.bin file that has the original kitkat 4.4 logo in it, can they take the OTA without doing anything else?
Also, when you flash the stock recovery, you become unrooted and so then if you flash your custom recovery after the OTA, you reroot, right?
Are you supposed to wipe the davlik/cache or anything else like that before you take the OTA?
Cozume said:
Thanks, if someone has an unlocked bootloader but is not rooted and they removed the bootloader unlocked message using the command:
fastboot flash logo logo.bin
and used a logo.bin file that has the original kitkat 4.4 logo in it, can they take the OTA without doing anything else?
Also, when you flash the stock recovery, you become unrooted and so then if you flash your custom recovery after the OTA, you reroot, right?
Are you supposed to wipe the davlik/cache or anything else like that before you take the OTA?
Click to expand...
Click to collapse
as for the logo i am not sure i think you should be ok .
as for when you flash the stock recovery yes you loose root but when you reflash the custom recovery if you still dont have root just reinstall SuperSU and you will be good to go,
and anytime i flash something i always wipe the cache/davlik
dray_jr said:
and anytime i flash something i always wipe the cache/davlik
Click to expand...
Click to collapse
really so when I flashed my custom recovery to root for the first time, I should have wiped that?
Cozume said:
really so when I flashed my custom recovery to root for the first time, I should have wiped that?
Click to expand...
Click to collapse
you dont have too but it is recommended
dray_jr said:
as for when you flash the stock recovery yes you loose root but when you reflash the custom recovery if you still dont have root just reinstall SuperSU and you will be good to go
Click to expand...
Click to collapse
Hmm, I have a VZW DE, unlocked bootloader, flashed TWRP then SuperSU to get root, then flashed the stock recovery and still have root. I honestly can't remember if I re-rooted after flashing back to stock recovery, but I don't think that I did. Are you saying that flashing to stock recovery should have unrooted the phone? What does it mean if it didn't? I hope I'm remembering correctly.
I'd like to be able to get the OTA 4.4.2 update from VZW when available but I keep reading it's not possible with root. How do I remove root if reflashing the stock recovery didn't do it? I'm coming from a GNex which was much simpler so I want to make sure I'm prepared for the OTA when it arrives. Thanks!
Melarsa said:
Hmm, I have a VZW DE, unlocked bootloader, flashed TWRP then SuperSU to get root, then flashed the stock recovery and still have root. I honestly can't remember if I re-rooted after flashing back to stock recovery, but I don't think that I did. Are you saying that flashing to stock recovery should have unrooted the phone? What does it mean if it didn't? I hope I'm remembering correctly.
I'd like to be able to get the OTA 4.4.2 update from VZW when available but I keep reading it's not possible with root. How do I remove root if reflashing the stock recovery didn't do it? I'm coming from a GNex which was much simpler so I want to make sure I'm prepared for the OTA when it arrives. Thanks!
Click to expand...
Click to collapse
OK,listen and listen closely, by far the best way to accept the ota is flash stock recovery and also flash your system.img, I don't care what other folks say, I've been here for 3 ota's , this will prevent any chances of having issues when accepting the ota. You may also flash Verizon's sbf firmware when available, the later is what I prefer
Sent on my Gummy running Lenoto X
flashallthetime said:
OK,listen and listen closely, by far the best way to accept the ota is flash stock recovery and also flash your system.img, I don't care what other folks say, I've been here for 3 ota's , this will prevent any chances of having issues when accepting the ota. You may also flash Verizon's sbf firmware when available, the later is what I prefer
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
Got it, that's what I'll do when the time comes. Thanks!
flashallthetime said:
OK,listen and listen closely, by far the best way to accept the ota is flash stock recovery and also flash your system.img, I don't care what other folks say, I've been here for 3 ota's , this will prevent any chances of having issues when accepting the ota. You may also flash Verizon's sbf firmware when available, the later is what I prefer
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
Could I do a TWRP backup of /data and just flash the entire system back to new, take the OTA and TWRP restore /data?
Or does /data contain some stuff that is linked to the version of Android I did the backup with?
fbiryujin said:
Could I do a TWRP backup of /data and just flash the entire system back to new, take the OTA and TWRP restore /data?
Or does /data contain some stuff that is linked to the version of Android I did the backup with?
Click to expand...
Click to collapse
Why would you need to do that? /data isn't going anywhere in the process of flashing system and recovery and then taking an OTA
piccit said:
Why would you need to do that? /data isn't going anywhere in the process of flashing system and recovery and then taking an OTA
Click to expand...
Click to collapse
I thought it might be different because I'm rooted, and encrypted.
fbiryujin said:
Could I do a TWRP backup of /data and just flash the entire system back to new, take the OTA and TWRP restore /data?
Or does /data contain some stuff that is linked to the version of Android I did the backup with?
Click to expand...
Click to collapse
You can try to restore your data after you upgrade, there is no guarantee you won't have any issues but it won't be a huge problem, you'll just have to factory reset. It no different when you flash a custom ROM , if the developer uses a new base then often they request you to do a clean fresh install, otherwise you'll have issues
Sent on my Gummy running Lenoto X
flashallthetime said:
You can try to restore your data after you upgrade, there is no guarantee you won't have any issues but it won't be a huge problem, you'll just have to factory reset. It no different when you flash a custom ROM , if the developer uses a new base then often they request you to do a clean fresh install, otherwise you'll have issues
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I'm not using a custom ROM though.
fbiryujin said:
I'm not using a custom ROM though.
Click to expand...
Click to collapse
I understand that, try it and see what happens, you might be OK restoring your data , no harm in trying
Sent on my Gummy running Lenoto X
flashallthetime said:
I understand that, try it and see what happens, you might be OK restoring your data , no harm in trying
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
So far no official update available to me even after flashing the stock image from Moto. My biggest goal here is to find a way to backup and restore nandroids from the encrypted phone.
Flash and relock Moto X manually
No lie my a$$hole did pucker up though the whole process but... success woohoo!
I followed the instruction on Motorola website [https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images] one thing I did not have is 'Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory)' had to do some searching; came across [http://forum.xda-developers.com/showthread.php?t=1138092] Thanks for that.
DETAILS (So this is what I was working with):
VZN, XT1060, MotoX, DEV unlocked bootloader, TWRP, SuperSU:
version: 4.4 | system: 140.45.5.ghost_verizon.Verizon.en.US | build: 13.11.1Q2.X-69-3
Did this on my Mac, NOT on PC
Steps:
1. got recovery image
2. got Motorola fastboot utility from | http://forum.xda-developers.com/showthread.php?t=1138092 moto-fastboot-osx.zip
3. used the fastboot from Darwin folder
4. follow steps from motorola website, but did not oem lock [$ fastboot oem lock]
5. last step reboot [$ fastboot reboot] a$$hole pucker up
But success, everything booted up properly even had the warning bootloader unlocked image
There was one point when it got to the Verizon boot image; it took abit longer a$$hole pucker up but finished booting.
Then phone went through the setup process (like new).... It's Miller time!
Come on 4.4.2 update via OTA
_slam said:
No lie my a$$hole did pucker up though the whole process but... success woohoo!
I followed the instruction on Motorola website [https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images] one thing I did not have is 'Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory)' had to do some searching; came across [http://forum.xda-developers.com/showthread.php?t=1138092] Thanks for that.
DETAILS (So this is what I was working with):
VZN, XT1060, MotoX, DEV unlocked bootloader, TWRP, SuperSU:
version: 4.4 | system: 140.45.5.ghost_verizon.Verizon.en.US | build: 13.11.1Q2.X-69-3
Did this on my Mac, NOT on PC
Steps:
1. got recovery image
2. got Motorola fastboot utility from | http://forum.xda-developers.com/showthread.php?t=1138092 moto-fastboot-osx.zip
3. used the fastboot from Darwin folder
4. follow steps from motorola website, but did not oem lock [$ fastboot oem lock]
5. last step reboot [$ fastboot reboot] a$$hole pucker up
But success, everything booted up properly even had the warning bootloader unlocked image
There was one point when it got to the Verizon boot image; it took abit longer a$$hole pucker up but finished booting.
Then phone went through the setup process (like new).... It's Miller time!
Come on 4.4.2 update via OTA
Click to expand...
Click to collapse
I just want to make sure that when you did this all it did was remove root and replace the bootloader, not any data or settings you had on your phone. That is the only thing that worries me before I decide to do the 4.4.2 update.
_slam said:
Currently on VZN, XT1060, MotoX, DEV unlocked bootloader, TWRP, SuperSU:
version: 4.4
kernel: [email protected]#1
system: 140.45.5.ghost_verizon.Verizon.en.US
build: 13.11.1Q2.X-69-3
NO ROM And I only changed two items:
1. VzwEntitlementService.apk via [http://forum.xda-developers.com/showthread.php?t=2536166] by changing the originalVzwEntitlementService.apk to VzwEntitlementService.apk.bak
2. Remove bootloader warning image
Question: for the 4.4.2 update (hopefully coming soon)
1. Can I just get the 4.4.2 update via OTA with my current setup
2. Or do I have a to flash back to stock
Thank you much.
and I'm new to xda.
Click to expand...
Click to collapse
1) You don't need to do much. Revert the Entitlement hack you did, you need the one that came on the device, not a hacked one.
2) Flash the stock recovery back to your phone. You'll need the stock recovery to install the OTA. Just do it the same way you flashed TWRP to your phone but use the stock recovery.img file from the 4.4 .sbf ( http://sbf.droid-developers.org/download.php?device=0&file=5 )
You will NOT lose root flashing the stock recovery, you will NOT lose root taking the OTA.
After updating, use Xposed and the Moto Tether module for tethering instead of using a hacked version of the app.
shadowmonk36 said:
I just want to make sure that when you did this all it did was remove root and replace the bootloader, not any data or settings you had on your phone. That is the only thing that worries me before I decide to do the 4.4.2 update.
Click to expand...
Click to collapse
If you have the Dev edition from VZW, it's simple to install the OTA.
This is what I did as I had root and xposed installed.
1. Download 4.4.2 file from XDA and cut and paste it from download folder to root of sdcard
2. Flash stock 4.4 recovery image via fastboot.
3. Flash 4.4 system image using mfastboot (must use mfastboot)
4. Boot into recovery
5. Apply update and selected the OTA zip.
6. Reboot
7. Power down and boot back into fastboot.
8. Flash TWRP, allow it to root, reboot.
9. Reinstall Xposed framework.
All my data and settings were still there. Even my xposed modules reactivated. No additional setup and my phone was exactly the same but had 4.4.2.
Only caveat is only do this if you've never installed other OS's and have only taken official OTAs from VZW. You need to be on the right bootloader. Don't brick your phone.
Sent from my Dev Edition Moto X
This does work to upgrade from 4.4.2 to 4.4.4 and there was no data/setting loss. I am running Verizon, developer phone, rooted, with xposed. Here are the directions I used:
1. disable Xposed - I just went to the app and uninstalled it
2. boot into bootloader/fastboot - connect your computer to the phone via USB. Then push the down volume and power at the same time. This will take you to the bootloader/fastboot
3. flash stock recovery (fastboot flash recovery yourfilename.img) - to do this (and to flash stock system) you need the motorola fastboot files and you will need to use the command prompt on the PC. for directions and download for the fastboot files check out this link - http://www.addictivetips.com/android/root-moto-x-install-cwm-recovery-complete-guide/ To actually download the stock recovery and stock system files you can download them here (look for 4.4.2 verizon - http://sbf.droid-developers.org/phone.php?device=0. I actually pasted the recovery.img/stock.img files into the windows fastboot folder and accessed CMD prompt from there to flash them. I flashed recovery then moved onto stock. I did not reboot until both were done.
4. flash stock system (fastboot flash system yourfilename.img)
5. reboot (stay in the CMD prompt and type - fastboot reboot)
6. update via OTA
7. reboot
You are now stock unrooted 4.4.4, so just re-apply root the same way you did the first time:
1. boot into bootloader/fastboot - you should be able to follow the directions from above to do this now
2. flash custom recovery - you should be able to follow the directions from above to do this now. Note that I tried CWM and it didnt work until I used TWRP. - download the latest version here and stick in the same fastboot folder you were using above - http://teamw.in/project/twrp2
3. boot to recovery - make sure you do this from the bootloader/fastboot screen. To do it, press down until you get to recovery then up to actually select it. I kept pressing power to select which doesnt actually select it.
4. flash SuperSU - this should be on your phone from the first time you rooted. If doing a new root you will need to get it first.
5. reboot
6. re-enable Xposed - i just reinstalled it and all of my settings were back
7. reboot
- BAM you are done!
I'm curious to see if this works the same for unlocked non developer edition Moto X's on VZW too
has anyone tried this to upgrade to 4.4.4? (unlocked BL, rooted 4.4.2 on Verizon)
dhoppy said:
has anyone tried this to upgrade to 4.4.4? (unlocked BL, rooted 4.4.2 on Verizon)
Click to expand...
Click to collapse
Multiple reports all over the forum say YES. (must flash stock recovery back, FIRST -- OR just use the FXZ and don't worry about having to flash stock recovery...)
Also, to the OP: questions belong in Q&A, not General. See the 2nd Sticky post at the top of the General forum....please post in the correct forums in the future...
I have a vzw DE
I took the 4.4.4 FXZ file from the other thread and just flashed it, no prep, didn't disable xposed.I was flashing in fastboot, not recovery, so its not checking for intact files. Then had to twrp/root and re-enable xposed.
But if you want to take the OTA then your procedure would be good.
Ryphez said:
I'm curious to see if this works the same for unlocked non developer edition Moto X's on VZW too
Click to expand...
Click to collapse
There is no difference whatsoever between an unlocked dev edition and any other unlocked X. The ONLY difference is the dev edition keeps its warranty when you unlock.
Whats the best twrp for root on 4.4.4
Mickoou said:
Whats the best twrp for root on 4.4.4
Click to expand...
Click to collapse
How about the latest version from the official source? Here: http://techerrata.com/browse/twrp2/ghost
It will root for you. Just flash w/fastboot, then "fastboot reboot-bootloader", then VOL DOWN to RECOVERY, and VOL UP to select it. When you go to exit, it will offer to install SuperSU Installer. Once booted, launch SuperSU Installer, and select Play Store method.
dhoppy said:
has anyone tried this to upgrade to 4.4.4? (unlocked BL, rooted 4.4.2 on Verizon)
Click to expand...
Click to collapse
No, you should be the guinea pig for all of us.
I can confirm that this works. I did it. I did not lose any data. It took about 20 minutes total. I already had everything installed otherwise you are looking at about 45 minutes.
The only reason to flash stock system.img before taking an OTA is if you made so many changes to system files you can't remember them to undo them. i.e. you modified your system so much that flashing system.img is the fastest way back to stock so it passes the validation checks of the OTA.
I thought there is an Xposed disabler (in the xposed thread) that you can run rather than uninstalling?
That being said.. this information has been the same for EVERY OTA Update. You have to flash stock recovery for the OTA to install, and your system can't be modified too much or it will fail the validation checks built into the OTA.zip. (i.e. there is a manifest file that checks for specific files and their check sums before it will flash the ota).
IF you are close enough to stock (like I am... stock, unlocked, rooted, with adfree, wifi tether for root, greenify, Quick boot, and a few other apps that require root), you can just flash stock recovery and take the OTA.
IF you are close enough to stock... you can also use the following... WITHOUT a PC... i.e. you haven't modified system too much, etc.
Place stock recovery.img, the latest TWRP img, the latest SuperSU.zip and the OTA.zip on your phone's DOWNLOAD folder.
Install Rashr.
Use Rashr to to flash stock recovery (select other from storage, and select your stock recovery). When it completes, pick the option to reboot to stock recovery.
From stock recovery, install the update zip and reboot the phone.
After the update install process is complete, use Rashr to flash TWRP (again, other from storage and pick your TWRP). When prompted, reboot into recovery (so twrp sticks). When in TWRP, select reboot to system.
If you lost root, reboot into TWRP recovery and install SuperSU.zip
KidJoe said:
The only reason to flash stock system.img before taking an OTA is if you made so many changes to system files you can't remember them to undo them. i.e. you modified your system so much that flashing system.img is the fastest way back to stock so it passes the validation checks of the OTA.
I thought there is an Xposed disabler (in the xposed thread) that you can run rather than uninstalling?
That being said.. this information has been the same for EVERY OTA Update. You have to flash stock recovery for the OTA to install, and your system can't be modified too much or it will fail the validation checks built into the OTA.zip. (i.e. there is a manifest file that checks for specific files and their check sums before it will flash the ota).
IF you are close enough to stock (like I am... stock, unlocked, rooted, with adfree, wifi tether for root, greenify, Quick boot, and a few other apps that require root), you can just flash stock recovery and take the OTA.
IF you are close enough to stock... you can also use the following... WITHOUT a PC... i.e. you haven't modified system too much, etc.
Place stock recovery.img, the latest TWRP img, the latest SuperSU.zip and the OTA.zip on your phone's DOWNLOAD folder.
Install Rashr.
Use Rashr to to flash stock recovery (select other from storage, and select your stock recovery). When it completes, pick the option to reboot to stock recovery.
From stock recovery, install the update zip and reboot the phone.
After the update install process is complete, use Rashr to flash TWRP (again, other from storage and pick your TWRP). When prompted, reboot into recovery (so twrp sticks). When in TWRP, select reboot to system.
If you lost root, reboot into TWRP recovery and install SuperSU.zip
Click to expand...
Click to collapse
Thanks for the tip. I believe I did it the way I mentioned because last time gravity box didnt have a wifi tether available so I had to modify the system files. this time I didnt touch them.
Flashing system.img is imo the smartest move to ensure the OTA takes. It's worth it as it only takes a minute and you don't have to even think about what you changed. Plus, it doesn't delete your data.
You are in there flashing stock recovery anyway, might as well.
Sent from my Dev Edition Moto X
Schaweet said:
Flashing system.img is imo the smartest move to ensure the OTA takes. It's worth it as it only takes a minute and you don't have to even think about what you changed. Plus, it doesn't delete your data.
You are in there flashing stock recovery anyway, might as well.
Sent from my Dev Edition Moto X
Click to expand...
Click to collapse
+1 :good:
Schaweet said:
Flashing system.img is imo the smartest move to ensure the OTA takes. It's worth it as it only takes a minute and you don't have to even think about what you changed. Plus, it doesn't delete your data.
You are in there flashing stock recovery anyway, might as well.
Sent from my Dev Edition Moto X
Click to expand...
Click to collapse
I'm getting an error while attempting to flash the system.img. I don't remember the exact wording but it was something like "data exceeds download buffer". I flashed the recovery.img without issue. I tried to take the OTA and it gets halfway through and craps out with the red exclamation triangle... Any ideas?
zoid_99 said:
I'm getting an error while attempting to flash the system.img. I don't remember the exact wording but it was something like "data exceeds download buffer". I flashed the recovery.img without issue. I tried to take the OTA and it gets halfway through and craps out with the red exclamation triangle... Any ideas?
Click to expand...
Click to collapse
Are you using mfastboot to flash system.img? You can't use regular fastboot. Just search for mfastboot.
Sent from my Dev Edition Moto X
Schaweet said:
Are you using mfastboot to flash system.img? You can't use regular fastboot. Just search for mfastboot.
Sent from my Dev Edition Moto X
Click to expand...
Click to collapse
Thank you Thank you.... That was it.
dhoppy said:
has anyone tried this to upgrade to 4.4.4? (unlocked BL, rooted 4.4.2 on Verizon)
Click to expand...
Click to collapse
1.6 SU was the only issue I had, I got the latest and had no issue
http://download.chainfire.eu/supersu
KidJoe said:
[*]Place stock recovery.img, the latest TWRP img, the latest SuperSU.zip and the OTA.zip on your phone's DOWNLOAD folder.
Click to expand...
Click to collapse
Where do I get the stock recovery.img file?
Thank you!
fede_arg said:
Where do I get the stock recovery.img file?
Thank you!
Click to expand...
Click to collapse
The OP tells you in the very first post...
First of all I just bought Global Moto G 2014 (XT1063) from US Amazon and that was KXH21.85-23 (not updatable to Lollipop via shared OTA.)
So I did manage to unlocked the bootloader and flashed KXH21.85-17 and tried to flash the "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US" which supposed to flash the Lollipop.
Unfortunately at first it failed to update me because "Printspooler.apk" mismatch the hash check. After attempt to flash (yes, I ignore the abort message and redo the process, It passed.... I don't know why) and stuck at some "xxx.apk" mismatch the hash again. After redo the process and bypass (for unknown reason that redo bypass the mismatch) I stuck at "velvet.apk" mismatch and this time It won't let me bypass and keep going on update to lollipop.
In my theory, Is it possible that I flash KXH21.85-17 from other country? Yes, any XT1063 (latin american, whereever on earth) supposed to flashable, but maybe the different country has slightly different apk. So that's why I failed the hash check.
Can anyone give me a URL or mirror to USA XT1063 for KXH21.85-17 that confirmed updatable to Lollipop? Since SBF-Dev and MotoFirmware is now down I couldn't find any.
I know what I'm saying is sound ridiculous, but I have no other theory that support my conspiracy anymore.
Hi @bankkung, I was facing similar problems. First you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Lamech242 said:
Hi @bankkungFirst you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
Click to expand...
Click to collapse
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
Lamech242 said:
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Click to expand...
Click to collapse
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
bankkung said:
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
Click to expand...
Click to collapse
Yes once you place the backup on your SD card, flash TWRP, reboot into recovery and go to advanced then go to file manager, then finish following the instructions above. Once you place it in the right place then you restore it. As of the stock recovery issue, it wouldn't make much sense to do that unless you followed the first option, where the stock recovery would actually be needed. But if you find a recovery image then yeah. If you do the second method you won't be able to receive updates nor update it manually unless doing the first method.. But the TWRP backup is the latest lollipop so enjoy!
If you still need help you can just flash TWRP recovery, and download this and flash it. http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57438355#post57438355
I was on Android 5.0 lollipop when something glitched and my phone wouldn't get out of bootloader mode, so i flash stock android. When it then finished and went back to 4.4.4 i tried flashed the factory images again to lock the bootloader, but it wouldn't let me because it kept saying "downgrading" or something along those lines. Now my phones sysetem version is 21.11.17.titan_retuaws.retuaws.en.Us which is the one of 5.0 when im clearly on 4.4.4. I am currently rooted with a custom recovery, any ideas on how i could possibly get back to android L?
ErikG1999 said:
any ideas on how i could possibly get back to android L?
Click to expand...
Click to collapse
Two possible ways:
A. the stock method
Download these files:
RETUAWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC.xml.zip from motofirmware.com
Blur_Version.21.11.17.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0)
Blur_Version.22.21.16.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0.1) (both from this forum)
install the first via fastboot, (ignore errors given by gpt.bin and motoboot.img), reboot
install the second via stock-recovery, reboot
install the third via stock-recovery, reboot
B.
flash The Titan Prime ROM, reboot
doppelhelix said:
Two possible ways:
A. the stock method
Download these files:
RETUAWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC.xml.zip from motofirmware.com
Blur_Version.21.11.17.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0)
Blur_Version.22.21.16.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0.1) (both from this forum)
install the first via fastboot, (ignore errors given by gpt.bin and motoboot.img), reboot
install the second via stock-recovery, reboot
install the third via stock-recovery, reboot
B.
flash The Titan Prime ROM, reboot
Click to expand...
Click to collapse
the A method doesn't work, ive tired it before. It doesn't let me relock the bootloader because it thinks im downgraded the system. I think ill try the B method. In order to instal the custom rom would i have to use a custom recovery? how would i go about doing it (P.S. XT1064 rooted with TWRP)
ErikG1999 said:
the A method doesn't work, ive tired it before. It doesn't let me relock the bootloader because it thinks im downgraded the system. I think ill try the B method. In order to instal the custom rom would i have to use a custom recovery? how would i go about doing it (P.S. XT1064 rooted with TWRP)
Click to expand...
Click to collapse
currently I BELIEVE if you have flashed MOTOBOOT.img (bootloader) from a 5.0 version you can not go back to a 4.4.4 version, but you can still run a 4.4.4 rom on a 5.0 bootloader. a locked / unlocked bootloader should not stop OTA updates. Having the wrong recovery will stop OTA installing. and mismatched bootloader / recoveries MAY cause problems.
to flash titan prime rom use TWRP (make backup 1st) place zipped tp-rom on sdcard and gapps.zip and following instruction in the rom thread
So, A method (blur versions) will always fail if you have TWRP installed, you need stock recovery that matches your rom on phone now , the 1st from moto firmware should work via mfastboot method.
ErikG1999 said:
It doesn't let me relock the bootloader
Click to expand...
Click to collapse
Why would you want to do that? There's absolutely no reason for relock.
help!!!
doppelhelix said:
Two possible ways:
A. the stock method
Download these files:
RETUAWS_XT1064_4.4.4_KXB21.85-17_cid9_CFC.xml.zip from motofirmware.com
Blur_Version.21.11.17.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0)
Blur_Version.22.21.16.titan_retuaws.retuaws.en.US.zip (Lollipop 5.0.1) (both from this forum)
install the first via fastboot, (ignore errors given by gpt.bin and motoboot.img), reboot
install the second via stock-recovery, reboot
install the third via stock-recovery, reboot
B.
flash The Titan Prime ROM, reboot
Click to expand...
Click to collapse
i did what you said and flashed the firmware and know my phone wont boot up. i can access the bootloader and twrp, please help!
ErikG1999 said:
i did what you said and flashed the firmware and know my phone wont boot up. i can access the bootloader and twrp, please help!
Click to expand...
Click to collapse
PM me, if you have some time, so we can go through the whole process step by step without overflooding this thread
ErikG1999 said:
i did what you said and flashed the firmware and know my phone wont boot up. i can access the bootloader and twrp, please help!
Click to expand...
Click to collapse
If you flashed the firmware correctly you should not have twrp.
Android The Greek said:
If you flashed the firmware correctly you should not have twrp.
Click to expand...
Click to collapse
ya i dun goofed, i fixed it now its all good
Hi, I have a Moto G 2nd Gen XT1064 running 4.4.4 KK (21.11.23). I rooted, unlocked the bootloader and installed TWRP. I'm really confused about how I go about getting the 5.0.2 OTA update my phone says is available. I tried downloading it 3 times and after I clicked to install it the phone powers off and then puts me in a bootloop while still on KK. I wonder why that is? So then I install the backup I made in TWRP and it gets me out of the bootloop.
Anyway, is it still possible to use the phones built-in OTA update service somehow or do I need to flash an OTA update using recovery? I read through maybe a dozen threads here but I couldn't figure it out(and I always thought I was a tech savvy guy ) If anybody can help me in any way I'd be extremely grateful!
TWRP is the problem, not the unlocked bootloader. You need to use stock recovery to install an OTA, not a custom recovery
Download your firmware version, extract the recovery.img and install using fastboot
http://motofirmware.com/files/category/38-titan/
thisisjason said:
TWRP is the problem, not the unlocked bootloader. You need to use stock recovery to install an OTA, not a custom recovery
Download your firmware version, extract the recovery.img and install using fastboot
http://motofirmware.com/files/category/38-titan/
Click to expand...
Click to collapse
How to do that can u elaborate the steps after downloading this ??
tharmor said:
How to do that can u elaborate the steps after downloading this ??
Click to expand...
Click to collapse
The same way you flashed TWRP.
Extract the .zip and put the recovery.img wherever you need it to do this:
Code:
fastboot flash recovery recovery.img
Thank you so much ThisIsJason, I flashed the recovery.img for my firmware I downloaded off motofirmware.com then I let my phone download the OTA and when I clicked to install this time it worked. Thank you so much cuz I was really frustrated and I just couldn't for the life of me figure out what I needed to do so your suggestion is very much appreciated.
Tharmor, this is what I did:
I checked my phone to see what firmware I had, look in the settings menu, then in "about phone" and I think it'll list your firmware there. Then go to the website ThisIsJason mentioned, and download your phones firmware (mine was 21.85.23 for the XT1064 model). Then what I did was I unzipped the recovery.img file into my fastboot folder, then I put my phone in recovery mode and plugged in the usb cable and started the fastboot program. Then I copy and pasted
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
into the program, hit Enter and it flashed the recovery.img to my phone. Then I unplugged the usb and booted the phone back up normally, I went into settings menu, then "about phone" and then I think at the top of the next menu clicked an option about software updates. So I let the phone download the update and then clicked to install it and viola, it worked a charm.
Xt1068 kxb21.85-23
I can not find the stock moto firmware for XT1068 KXB21.85-23. Any idea where I can download it from?
ABShak3 said:
I can not find the stock moto firmware for XT1068 KXB21.85-23. Any idea where I can download it from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295
But you NO longer need to use .23 to update , there is a directly fastboot flashable Lollipop 5.0.2 for XT1068 at above link.. NOTE this is for XT1068 only
reefuge said:
http://forum.xda-developers.com/moto-g-2014/development/windows-tool-moto-g-2014-xt1068-dual-t2983295
But you NO longer need to use .23 to update , there is a directly fastboot flashable Lollipop 5.0.2 for XT1068 at above link.. NOTE this is for XT1068 only
Click to expand...
Click to collapse
Thanks. But I just need to flash stock recovery to update to lollipop.Will this do the trick or will I need to unlock bootloader again?
ABShak3 said:
Thanks. But I just need to flash stock recovery to update to lollipop.Will this do the trick or will I need to unlock bootloader again?
Click to expand...
Click to collapse
the lollipop there in post #7 is the same as the lollipop you want to OTA.........
but below is thread for recovery you want .23
bootloader only need to be unlocked for upgrades or custom not stock
Both custom and stock kitkat recoveries here in .14. .23 .27
cutom can be temp booted
Stock Must be installed
http://forum.xda-developers.com/moto-g-2014/development/recovery-images-install-recovery-images-t2987246