Related
Hi all. My Xperia X8 is no more able to recognize SIM cards. I have miniCM10, bootloader unlocked successfully many months ago. Previously it was working fine, but after remove/reinsert the battery now the phone cannot recognize any SIM (I have tried 3 different SIM cards). Further the phone fails in adding new APNs.
I have searched in this forum, and in other threads seems that the problem is caused by a bad bootloader unlocking. But in my case the unlock went fine, it just worked for many months continuously. What I have to do? I have already tried factory reset and format partitions from recovery. I have also reinstalled miniCM, but nada. Should I try to reinstall kernel or change ROM/kernel?
Thank you in advance
elvis91 said:
Hi all. My Xperia X8 is no more able to recognize SIM cards. I have miniCM10, bootloader unlocked successfully many months ago. Previously it was working fine, but after remove/reinsert the battery now the phone cannot recognize any SIM (I have tried 3 different SIM cards). Further the phone fails in adding new APNs.
I have searched in this forum, and in other threads seems that the problem is caused by a bad bootloader unlocking. But in my case the unlock went fine, it just worked for many months continuously. What I have to do? I have already tried factory reset and format partitions from recovery. I have also reinstalled miniCM, but nada. Should I try to reinstall kernel or change ROM/kernel?
Thank you in advance
Click to expand...
Click to collapse
had u flash to stock firmware?
sometimes it work
but dont forget to insert sim card while flashing or unlock
BlackRabbit1703 said:
had u flash to stock firmware?
sometimes it work
but dont forget to insert sim card while flashing or unlock
Click to expand...
Click to collapse
Should I relock my bootloader before flashing stock firmware?
elvis91 said:
Should I relock my bootloader before flashing stock firmware?
Click to expand...
Click to collapse
nope
u can directly flashing the stock firmware
it will automatically relock
Thank you. How to flash stock firmware? Simply using Sony PC Companion?
Flashtool: http://forum.xda-developers.com/showthread.php?t=986697
Eclair 2.1: http://www.mediafire.com/download/6ih3g9ui4skm4sr/E15i_2.1_X8.rar << IDK if this has 015 basebands. :S
edit: found another one
http://www.mediafire.com/download/dexa4ulyx018s8o/eclair2.1.7z
-HuntDX- said:
Flashtool: http://forum.xda-developers.com/showthread.php?t=986697
Eclair 2.1: http://www.mediafire.com/download/6ih3g9ui4skm4sr/E15i_2.1_X8.rar << IDK if this has 015 basebands. :S
edit: found another one
http://www.mediafire.com/download/dexa4ulyx018s8o/eclair2.1.7z
Click to expand...
Click to collapse
The second one probably is broken, when I try to flash the procedure doesn't start.
The first one is not a single .ftf file, but they are many .sin files. How to use them with flashtool?
Does exist other links to stock firmware?
elvis91 said:
The second one probably is broken, when I try to flash the procedure doesn't start.
The first one is not a single .ftf file, but they are many .sin files. How to use them with flashtool?
Does exist other links to stock firmware?
Click to expand...
Click to collapse
hahah LOL
just download from my signature
and watch my video
click here
-HuntDX- said:
Flashtool: http://forum.xda-developers.com/showthread.php?t=986697
Eclair 2.1: http://www.mediafire.com/download/6ih3g9ui4skm4sr/E15i_2.1_X8.rar << IDK if this has 015 basebands. :S
edit: found another one
http://www.mediafire.com/download/dexa4ulyx018s8o/eclair2.1.7z
Click to expand...
Click to collapse
BlackRabbit1703 said:
hahah LOL
just download from my signature
and watch my video
click here
Click to expand...
Click to collapse
Ok, flashed stock ROM, but the sim is not working too. Probably because my phone is SimLocked and this sim is from a different operator, I guess. Should I re-unlock the bootloader (i.e. remove sim-locking)?
elvis91 said:
Ok, flashed stock ROM, but the sim is not working too. Probably because my phone is SimLocked and this sim is from a different operator, I guess. Should I re-unlock the bootloader (i.e. remove sim-locking)?
Click to expand...
Click to collapse
I've read some thread that explain this
about simlocked for x8
maybe u can search dude
sorry I forgot the link
Im having an issue in my Moto x (xt1095) . I tried unlocking bootloader while updating to android 5.0 and once i done i found an issue that my IMEI is showing unknown. I tried various ways of flashing back stock rom from motorola website and stuff. Everything in the phone is fine except my IMEI showing unknown and no network data.. Can anyone please help me ?
Follow this link and scroll down to question 13.
http://forum.xda-developers.com/showthread.php?t=2876769
Sent from my XT1095 using Tapatalk
grneyez said:
Follow this link and scroll down to question 13.
http://forum.xda-developers.com/showthread.php?t=2876769
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Before messing with partitions are you 100% certain you flashed the exact factory firmware back to your phone? If you used firmware from any other model it will boot up but you will experience the exact problem you are having due to an incompatible modem(radio) file.
btw you can verify the model # of the phone as it is laser etched on the bottom(albeit very small).
Issue is cleared!!!
Thank you so much for your help . I have uploaded the wrong firmware and thats why the issue was repeating. Everything seems to be fine now.
Just one more thing ... can you please help how do i relock the bootloader ?
Relock the bootloader
Can you please tell me how to relock the bootloader?
Steve-x said:
Before messing with partitions are you 100% certain you flashed the exact factory firmware back to your phone? If you used firmware from any other model it will boot up but you will experience the exact problem you are having due to an incompatible modem(radio) file.
btw you can verify the model # of the phone as it is laser etched on the bottom(albeit very small).
Click to expand...
Click to collapse
Hi,
I flashed my beautiful smartphone with CyanogenMod, then I decided to go back to stock. During this latest step I forgot to backup the EFS folder (I was neither knowing its existence!) and now it is corrupted (in About I have a Baseband unknown). How to fix? Is there a solution? Is there any hacker here??
Thanks a lot
Fabio
mrfabio80 said:
Hi,
I flashed my beautiful smartphone with CyanogenMod, then I decided to go back to stock. During this latest step I forgot to backup the EFS folder (I was neither knowing its existence!) and now it is corrupted (in About I have a Baseband unknown). How to fix? Is there a solution? Is there any hacker here??
Thanks a lot
Fabio
Click to expand...
Click to collapse
Try flashing the stock radio. You didn't tell us your model/carrier so I could not link the firmware you need.
Sent from my XT1095 using Tapatalk
AGISCI said:
Try flashing the stock radio. You didn't tell us your model/carrier so I could not link the firmware you need.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hi, thanks a lot for your answer.. I have a retde XT1092 and restoring to stock using the Motorola guidelines didn't solve... I opened a thread also in the Motorola forum:
https://forums.motorola.com/posts/bc9598199a?commentId=992184#992184
Especially these didn't solve:
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
from:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
That is the wrong firmware. The xt1095 has a different radio. You need the radio from this file:
http://www.filefactory.com/file/3oippfwh4oil/VICTARA_RETDE_XT1092_5.1_LPE23.32-25.3_cid7_CFC.xml.zip
The instructions are the same. Just use this ones radio.
Sent from my XT1095 using Tapatalk
AGISCI said:
That is the wrong firmware. The xt1095 has a different radio. You need the radio from this file:
http://www.filefactory.com/file/3oippfwh4oil/VICTARA_RETDE_XT1092_5.1_LPE23.32-25.3_cid7_CFC.xml.zip
The instructions are the same. Just use this ones radio.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yes I know that URL ! I always restored from there using XT1092, tried with kitkat 5.0 and 5.1 without any success ...
Well if that didn't work, then I assume it is either your PDS partition that is corrupt, or a hardware failure. If you didn't backup your PDS partition there is no hope to fix it yourself. You will have to most likely bring it to a service center to get it fixed.
Sent from my XT1095 using Tapatalk
Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!
Kevin_Desousa said:
Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!
Click to expand...
Click to collapse
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yep, I wiped them both as per usual. If it helps, I can still access fastboot and recovery.
If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk
xKroniK13x said:
If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22. I forgot which version I had before I tried rooting, but I do know it was android 5.1.
Kevin_Desousa said:
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22
Click to expand...
Click to collapse
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)
Kevin_Desousa said:
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)
Click to expand...
Click to collapse
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1
Kevin_Desousa said:
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1
Click to expand...
Click to collapse
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk
xKroniK13x said:
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up
Kevin_Desousa said:
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up [emoji14]
Click to expand...
Click to collapse
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk
xKroniK13x said:
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."
Kevin_Desousa said:
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."
Click to expand...
Click to collapse
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.
Kevin_Desousa said:
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.
Click to expand...
Click to collapse
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?
Kevin_Desousa said:
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?
Click to expand...
Click to collapse
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I did flash the Canadian firmware to my knowledge. RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml?
I was browsing the xda threads and saw this thread: http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693 where it states: "IMPORTANT. From 5.1 update, the modems included on the update are FULLY compatible with all models, XT1097, 1092 and 1093 and all carriers ,so, you don't have to worry about losing IMEI, signal or data." So, should I be able to flash the brazilian xt1097 firmware and have the proper radios installed from this thread: http://forum.xda-developers.com/moto-x-2014/general/ota-android-marshmallow-6-0-final-t3248315 ?
i updated my moto x 2014 (XT1095) to the current marshmallow and after a successful update , now i dont get any signal and when i check my imei too i get this (0) thus the number zero. please can some one help me out. any help is appreciated. i attached some images of it.
thanks.
branzy said:
i updated my moto x 2014 (XT1095) to the current marshmallow and after a successful update , now i dont get any signal and when i check my imei too i get this (0) thus the number zero. please can some one help me out. any help is appreciated. i attached some images of it.
thanks.
Click to expand...
Click to collapse
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
md07 said:
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
Click to expand...
Click to collapse
please am having unlocked bootloader. i have attached images .
please any help ?
branzy said:
please any help ?
Click to expand...
Click to collapse
Hi i had that problem so i fastboot flash my baseband it solved everything....
hutchjim said:
Hi i had that problem so i fastboot flash my baseband it solved everything....
Click to expand...
Click to collapse
what baseband version did u flashed ?
branzy said:
what baseband version did u flashed ?
Click to expand...
Click to collapse
You have to flash the one for the xt1095.
Sent from my XT1095 using Tapatalk
AGISCI said:
You have to flash the one for the xt1095.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
please can u send me a link where i can find modems to flash ?
You need to Google your modle of phone.they are image files k
branzy said:
please can u send me a link where i can find modems to flash ?
Click to expand...
Click to collapse
http://www.filefactory.com/file/5d66szhobgmx/VICTARA_TMO_XT1095_5.1_LPE23.32-21.6_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Mine does show imei but it's not getting any signal.
I have an Xt1097 converted to xt1095 like 6 months ago, and i didn't have this issue for the lollipop 5.1 update. Weird. What should i do?
AGISCI said:
http://www.filefactory.com/file/5d66szhobgmx/VICTARA_TMO_XT1095_5.1_LPE23.32-21.6_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
i will download and feedback you.
md07 said:
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
Click to expand...
Click to collapse
i got the box and when i looked on it it shows XT1094 not XT1095 so i think if i get XT1094 stock rom and flash it might work .
branzy said:
i got the box and when i looked on it it shows XT1094 not XT1095 so i think if i get XT1094 stock rom and flash it might work .
Click to expand...
Click to collapse
Correct you need the modem for the xt1094 to get it working again.
Sent from my XT1095 using Tapatalk
AGISCI said:
Correct you need the modem for the xt1094 to get it working again.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
currently the phone is running on a firmware (4.4.4) which is xt1095 . will i have to flash the whole xt1094 firmware or i should just flash the modem ?
branzy said:
currently the phone is running on a firmware (4.4.4) which is xt1095 . will i have to flash the whole xt1094 firmware or i should just flash the modem ?
Click to expand...
Click to collapse
Just the modem will get you signal again.
Sent from my XT1095 using Tapatalk
AGISCI said:
Just the modem will get you signal again.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
ok then i have to search for the modem to flash on it . please you can also send links corresponding to the modem .
thanks.
i have a quick question , now that the phone is on kitkat 4.4.4 can i flash a modem of 5.0 or 5.1 to get the signal working (xt1094)?
You can try, it might work.
branzy said:
i have a quick question , now that the phone is on kitkat 4.4.4 can i flash a modem of 5.0 or 5.1 to get the signal working (xt1094)?
Click to expand...
Click to collapse
I have recently rooted, my device. Thanks to CF. But in the whole bunch of flash coding, just make sure you are not flashing your modems. Below are the commands I had avoided while flashing the rom.
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
Now, in case of yours, you can try to flash with modem of 5.0 or 5.1 but I would recommend to go-ahead with 4.4.4 since that was original.
Incase if you failed to find it, then try with 5.0 or 5.1
ashishcw said:
I have recently rooted, my device. Thanks to CF. But in the whole bunch of flash coding, just make sure you are not flashing your modems. Below are the commands I had avoided while flashing the rom.
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
Now, in case of yours, you can try to flash with modem of 5.0 or 5.1 but I would recommend to go-ahead with 4.4.4 since that was original.
Incase if you failed to find it, then try with 5.0 or 5.1
Click to expand...
Click to collapse
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
which means that if i ignore this code it could get my signal back previously ?