Enabling LTE Band 5 on XT1092, can it be done? - X 2014 Q&A, Help & Troubleshooting

If I convert my XT1092 to XT1095 using fastboot and the XT1095 stock marshmallow image & modem, will Band 5 be enabled?
Have anyone tried this with success or failure?
Kindly advise..
Thanks in advance

So I'm just answering my own question..
I went ahead and tried it. It doesn't work.
Converting XT1092 to XT1095 or 1097 including using the respective modems, the phone doesn't detect any cellular network

Related

HELP! I might have bricked the radio

I flashed
TMO_Retail_XT1053_5.1_LPA23.12-15.222.21.15.ghost_row.Retail.en.US
and XT1058_GHOST_RCICA_5.1_LPA23.12-15_cid14_CFC.xml
today, both get no signal and IMEI is "0"
It happened before when I was flashing RETAIL-XT1058_BR_5.1-222.21.7-BR and I fixed it by flashing (NON-HLOS, fsg, motoboot) from ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF.xml
When I tried to do the same thing today, I get the error
downgraded security version
update sbl3 failed
Do anyone know how to fix this?
I use ATT in US.
I am not sure about my phone model. I believe I picked US Celluar Factory Unlocked phone, but it writes Model: xt1053 at back
You should've only flashed what's for your model only. If it says xt1053 in the back of the phone, only I repeat ONLY flash official firmware that is only for your phone. If you flash a different models firmware, then it causes hard brick. Since you flashed 5.1, there is no possible way to downgrade at the moment. And if it was uscc, it would say xt1055. I know because I have one.
Sent from my Moto X using Tapatalk
flash manually tmo retail xt1053 rom thats for you phone.
days ago i flashed brazil retail radio on top of my xt1053 with official stock US OTA 5.1 and got imei 0 as well. fixed it downloading tmo retail rom and flashing that radio only (NON-HLOS.bin and fsg)
Sent from my XT1053 using Tapatalk

No internet/data after 5.1 update us cellular xt1093

if i update to 5.1 ota i lose internet data i had to go back to previous version 5.02.
Anyone know how to fix this on 5.1 us cellular moto x?
bump
yunior597 said:
if i update to 5.1 ota i lose internet data i had to go back to previous version 5.02.
Anyone know how to fix this on 5.1 us cellular moto x?
Click to expand...
Click to collapse
I just flashed the 5.1 pure edition over my XT1097 and everything is working great because the update has the bands of almost all the major carriers. If you update and you lose signal, data or IMEI just flash the modem of your original version and everything should work.
juliospinoza said:
I just flashed the 5.1 pure edition over my XT1097 and everything is working great because the update has the bands of almost all the major carriers. If you update and you lose signal, data or IMEI just flash the modem of your original version and everything should work.
Click to expand...
Click to collapse
the problem is xt1093 is cdma and no other rom works with it.
yunior597 said:
the problem is xt1093 is cdma and no other rom works with it.
Click to expand...
Click to collapse
did you flash the XT1093 firmware 5.1 and you lose signal? weird, because is the official for you model
http://www.filefactory.com/file/1fib372p0cbv/VICTARA_USC_XT1093_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
I flashed the XT1093 version months ago over my 1097 because was the first to get 5.0.2 and stuck at "registering phone, please wait", what I did was to dirty flash over different version.
I understand that CDMA supports diffrentes bands but as I said, if you lose signal after the 5.1 update just try to flash the modems of the 5.0.2 or 5.0 of the XT1093
yes i flashed the original one... i even ota updated it.... seems to be problems with that version. not losing signal, only cant connect to data/internet.
Flash modem files from motorolas own stock image, worked for me
Sent from my XT1095 using XDA Free mobile app

Moto X 2014 XT1092 RETDE

Hi Guys,
I am desperate. Despite I tried the roms below (originally provided by Motorola) I cannot connect to the EE phone provider in Uk!! I am using a TIM sim too and both were working ok with the previous version. Always same message SIM card not present or not enabled.
I tried:
RETDEALL_XT1092_5.0_LXE22.46-19_cid7_CFC.xml.zip
VICTARA_RETDE_XT1092_5.1_LPE23.32-25.1_cid7_CFC.xml.zip
RETDE-XT1092-STOCK-5.1.zip
VICTARA_RETEU_XT1092__5.1_LPE23.32-25.1_cid7_CFC.xml.zip
using the guidelines below:
motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
I remember that in About settings I was RETDE, do you know from where/which stock factory image I can use??
Thanks in advance
Fabio

No signal after Android 6.0 update

A few details:
First, I'm running 100% stock everything. However, this issue has also happened on Cyanogenmod 13, and both Motorola support and my carrier aren't very helpful, telling me to clear the cache which obviously hasn't worked.
I did an OTA update from Android 5.1 and I get no signal at all now. I have no idea why this is, it only seems to occur on Android 6.0.
What model is your device? Have you tried just flashing the modem files for your device?
Red_81 said:
What model is your device? Have you tried just flashing the modem files for your device?
Click to expand...
Click to collapse
Apologies, I should add this as an edit. Model number says Moto X (2nd Generation), System version 24.11.18.victara_tmo.tmo.en.US tkpca. Not sure what else you need, modem files have been reflashed but still no luck Out of ideas.
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
md07 said:
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
Click to expand...
Click to collapse
It worked on the 5.1 FW that I flashed though, and doesn't work on any version of 6.0. I flashed the FW provided by Moto on here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images (Moto X (2nd Gen) Pure Edition: L-5.1-LPE23.32-21.3 TMO)
(And yes I have reflashed the modem)
I had this issue too with the OTA I received on xt1092 EU. I reflashed the modem with 5.1 fw, while keeping everything else on 6.0 fw. Worked for me, might work for you too. Good luck.
I have the same issue, on what I had thought was an EU xt1092. I uploaded the xt 1095 5.1 stock files to it a while ago and rooted and it has been fine. Did Marshmallow original OTA yesterday and it's lost cell signal. Some more investigation shows the imei of the phone to a be a AU variant! Wasn't expecting that. Reflash to xt1095 stock 5.1 bought service back again. Have tried a few different modem files, But I can't get signal with 6.0. Any ideas? Or any magic modem files . I also can't sideload the EU 6.0 OTA, it fails with signature problems.
I'm experiencing the same problem. I received the OTA a few days before Christmas, and now I'm still without signal. Just tried flashing Android 5.0 modem partition (from Motorola), but it didn't work.
My phone is the XT1097, but everywhere I searched said that the XT1097 and XT1095 were the same phone. I'll try flashing the modem partition from the 5.1 recovery image, I'm just waiting for Motorola to give me access to it.
EDIT: and yes, I flashed 5.1 from Motorola and it worked like a charm. Then OTA came and it messed up my phone's signal.
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
RockyTV said:
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
Click to expand...
Click to collapse
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
TobeXtobes said:
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Click to expand...
Click to collapse
You need the xt1092 modem. However there is more than one xt1092. Do you have reteu, retes, or retde?
Sent from my XT1095 using Tapatalk
AGISCI said:
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
Click to expand...
Click to collapse
My XT1097 is from Brazil, no carrier, bought it directly from Motorola's site. The weird thing I've found is that the update version has retbr in its name.
EDIT: fixed it. Found a thread that had the retail images for XT1097. Downloaded the Brazil version and flashed the modem. It works now.
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
TobeXtobes said:
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
Click to expand...
Click to collapse
In fastboot run:
fastboot getvar all
It should tell you what the phone truly is.
Sent from my XT1095 using Tapatalk
Ah, ro.carrier says reteu
TobeXtobes said:
Ah, ro.carrier says reteu
Click to expand...
Click to collapse
Ok, here is the full 6.0 for reteu:
http://www.filefactory.com/file/6q0pj4hr2sh5/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Use the commands in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
That should get you back on the correct modem for your phone. Or if you want just flash everything in this zip to be 100% stock 6.0 for the reteu model.
Sent from my XT1095 using Tapatalk
Thank you, I think I might flash the whole thing back to stock with that and start again.
As a bit of a newb here, the fastboot system system.img command isn't working for this chunked image. What is the system image command for sparse, or the quickest way to rechunk them together. I've been searching but I have come up with about 15 different methods!
By the way, flashing the modem files from that image worked. Thank you but I would still like to go back to stock.
Same issue signal drop after upgrading to 6
i am having the same issue after upgrade to 6. Signal drops a lot. Works fine when connected to 3g or 4g networks, but drops to 2g networks. What could be the reason.

Network search error MOTO G 2014 (XT1068) Titan

My phone model is moto g 2014 (XT1068) Titan
Recently I unlocked my phone's bootloader to install official lineage OS 7.1.1, I had successfully installed it everything works fine unless the network.
I tried to search the network it says error while searching networks. I have ensured that the aeroplane mode is off, I tried to clear cache, factory reset and all other related solutions, but still the problem encounters. After that I downgraded my phone to official marshammalow version, but the problem continues, when I run the caqtest I came to know that it shows the error that "phone iccid unkonwn, sim iccicd is null, phone and sim iccicd compare error"
Also i tried to turn on voice and data radio on using *#*#4636#*#* (Because it says radio is off in information status) but that does nothing
Please help me how to fix it
sumashash said:
My phone model is moto g 2014 (XT1068) Titan
Recently I unlocked my phone's bootloader to install official lineage OS 7.1.1, I had successfully installed it everything works fine unless the network.
I tried to search the network it says error while searching networks. I have ensured that the aeroplane mode is off, I tried to clear cache, factory reset and all other related solutions, but still the problem encounters. After that I downgraded my phone to official marshammalow version, but the problem continues, when I run the caqtest I came to know that it shows the error that "phone iccid unkonwn, sim iccicd is null, phone and sim iccicd compare error"
Also i tried to turn on voice and data radio on using *#*#4636#*#* (Because it says radio is off in information status) but that does nothing
Please help me how to fix it
Click to expand...
Click to collapse
Did you try with other SIM?
Yes
Yes of course I tried other sim and also both of these sims in my phone are working fine with other devices
Please help me
vayavalla said:
Did you try with other SIM?
Click to expand...
Click to collapse
First of all thanks for your reply on my post
Please help me, I just gone through all the posts related to this, but I didn't get any solution regarding this.
Sorry, no idea
Enviado desde mi Moto G 2014 mediante Tapatalk
Got the solution
vayavalla said:
Sorry, no idea
Enviado desde mi Moto G 2014 mediante Tapatalk
Click to expand...
Click to collapse
Hey there,
I got the solution, my phone is working perfectly alright now,
Here i am explaining what i did to solve this network issue because this might help somebody who are facing the same problems related to network.
I just downloaded the official Marshmallow 6.0 stock ROM for this Indian Model Moto G 2014 XT1068 (Dual Sim)
And then connected my phone to PC in fastboot mode
And then using the mfastboot tool i did only flash NON-HLOS.bin and fsg.mbn using the command
Thats it
Note: My phone is running on Lineage OS 7.1.1 titan version and i flashed the modem files of Marshmallow Version
sumashash said:
Hey there,
I got the solution, my phone is working perfectly alright now,
Here i am explaining what i did to solve this network issue because this might help somebody who are facing the same problems related to network.
I just downloaded the official Marshmallow 6.0 stock ROM for this Indian Model Moto G 2014 XT1068 (Dual Sim)
And then connected my phone to PC in fastboot mode
And then using the mfastboot tool i did only flash NON-HLOS.bin and fsg.mbn using the command
Thats it
Note: My phone is running on Lineage OS 7.1.1 titan version and i flashed the modem files of Marshmallow Version
Click to expand...
Click to collapse
Didn't you say before that you had flashed stock?

Categories

Resources