Database Develop

Stuck in the infamous connect phone to PC screen - Please help

HI,
I'm a complete newbie with the Android (power user in WM).
Using SGS i9000 with origin German ROM I9000XXJF3.
I was trying my first ROM reflash, but something seems to be very wrong.
This is what I did:
1. I rooted the device successfully using that guide: http://forum.xda-developers.com/showthread.php?t=728754
2. Downloaded and install from the market busybox
3. Then I followed the guide here: http://samsung-firmware.webs.com/Flash guide english.pdf .
Important, I was trying to install the ROM: I9000JPJG8 BUT with PIT 513
4. ODIN announced (on blue background ): reset, and the device returned into recovery mode (same I used for rooting the device).
5. I was trying to repeat the process, this time with PIT 512 with the same ROM.
6. It seems to successful. I saw the glowing Galaxy S, for sometime, then the device turned itself off.
Now all I get is the connect to PC (phone, orange exclamation mark & PC logos) logo.
I was trying to pull the battery out, restarted the PC, and was trying to reconnect to ODIN, but ODIN does not recognize the device.
I was trying to select in ODIN only "auto reboot", press start, but again nothing happened.
Very frustrating for a start.
Any help would be greatly appreciated.
Amir.

Shalom amir,
go back to download mode and reflash with odin (512 pit). Should do the trick.

I've experienced the same thing before. I thought I bricked the phone but that wasn't the case.
Try to reflash your SGS on another computer. This PC that you used won't be able to find your SGS anymore until you successfully flashed it.

mike.sw said:
Shalom amir,
go back to download mode and reflash with odin (512 pit). Should do the trick.
Click to expand...
Click to collapse
Hi Mike,
After numerous times, I've managed to return to downloading mode
I've achieved that by inserting the battery, while pressing vol down+power+home.
Now was able to reflash, and everything is good.
cavinsoo said:
I've experienced the same thing before. I thought I bricked the phone but that wasn't the case.
Try to reflash your SGS on another computer. This PC that you used won't be able to find your SGS anymore until you successfully flashed it.
Click to expand...
Click to collapse
I did that too, but the problem was how to return to downloading mode..
Almost had a heart attack...
Thanks anyway guys!

I have been stuck on that screen more than I like but have found this to work the best.
1 - power down the device and remove battery / usb connection
2 - connect usb
3 - hold the volume up key while moving to step 4
4 - insert battery
I end up in the download screen everytime and then must start the Ordin3 flash quickly otherwise it just hangs on the download. I appears if I start the download within 15 seconds, works like a charm.

RickCain said:
I have been stuck on that screen more than I like but have found this to work the best.
1 - power down the device and remove battery / usb connection
2 - connect usb
3 - hold the volume up key while moving to step 4
4 - insert battery
I end up in the download screen everytime and then must start the Ordin3 flash quickly otherwise it just hangs on the download. I appears if I start the download within 15 seconds, works like a charm.
Click to expand...
Click to collapse
You are SUCH A LIFE SAVER!!! I tried every other thing on xda and youtube but the above steps are the only one that worked on my vibrant. The trick is to start ODIN ASAP after step 4 and start the flash (after selecting PIT and PDA file) or it won't work if you take your time

This happemed to me too nuty phone was going ibto download mode so I just reflashed it with 2.3.4
Sent from my sgs
kernel: galaxian
Rom: jetpack

please HELP my i9001 is bricked !!!

Hi Guys,
I tried to upgrade rom from 2.3.3 to 2.3.6 got on this forum , using odin 4.43
the port was reconized and the process started but stay locked at 4/12 during 1 hour
so that I had to stop odin and shut down my i9001 from downloading mode .
now when restarting device I get icon showing a phone and a pc with yellow triangle and exclamation point in it .
Please help, what ca I do?
I made a full data+system backup using titanium on my sd card before stating the operation, could it be used ?
thanks in advance !!
Eric

Can you acces download mode? If you can, just try again with odin..

Hi,
You mean it is possible to get dowload mode , even if I got thei triangle pc phone logo ?

You should be able to get into download mode. Get the battery out of your phone and put it back after 10sec, Volume Down + Home + Power Button at the same time will get you in download mode.
It happens a lot that the flash is stuck, especially with large files. Changing USB or PC even will solve the problem.

thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !

ericcostes said:
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
Click to expand...
Click to collapse
That is fine, MD5 means "one package", so be sure to check One Package and then your .MD5 along with the .OPS and you're good to go. No need for other files.

Thanks Guys !
I could flash my phone with odin 4.43 and 2.3.6 rom .
but the only way to success after many sessions, was to uncheck box " secure OPS file" on odin screen .
thanks a lot

Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???

mr_guitar_eg said:
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
Click to expand...
Click to collapse
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...

when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!

Jaafar U.K. said:
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Click to expand...
Click to collapse
That's for softbricks only, not really a brick (just something that makes people panic and think they bricked their phone ). Hardbricks are almost impossible as in: go to a service center and hope they will replace or fix your device (without any cost)...

Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai

Firmware upgrade encountered an issue. Please select recovery mode in kies & try agai
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone

PSYCHOBOY18 said:
i was trying to root my note something happen now i cant do nothing!!!in the screen say'''
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again even kies cant conect to the phone
Click to expand...
Click to collapse
what have you tried to do to fix this already?

ICS Bad Idea!!!
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......

Sorry guys wrong post this is for Samsung captivate glide! , my mistake..
Sent from my SAMSUNG-SGH-I927R using xda premium

Firmware upgrade encountered an issue. Please select recovery in Kies and try again
This is for Samsung Galaxy Note 2 (Sprint SPH-L900) Is the website for the stock rom
rwilco12.com
stock rom: [ROM][ODIN][TAR]SPH-L900 MA7 (MA7 Modem/Kernel/ROM - Stock
Odin 3 v 1.85 (You Can Google and find it)
ok sweet so I have done this successfully. i really believe you should put this on ur first post so people dont have to do searching and can feel at ease.
1. Start ODIN 3v1.85
2. Enter Download Mode
a. Power the phone off.
b. Plug the usb cable into the computer (not the phone)
c. Hold both sides of the volume rocker down (vol up + vol down)
d. While holding those buttons down, insert the usb cable into your phone.
It may take a second or two for the screen to display with a warning. Press the Volume UP key to download a custom ROM.
3. In ODIN, click PDA and select the PDA.tar file you extracted
4. DO NOT check re-partition, Flash Lock, Phone EFS Clear, Phone bootloader update
5. CHECK Auto Reboot and F.Reset Time
6. Click Start
At the end of the process ODIN's first block will show up as YELLOW with the words PASS and your phone will reboot.
Unplug USB from your phone after first boot.
It worked for me perfectly you don't have to F.Reset

Perhaps you should try the Note 2 forums for a more informative response?

I have the same problem with my tmobile galaxy s ii, T989
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and whenever I start installing a stock room using Odin 1.85 it force close and the phone stays in the same page saying
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
Please help!

Tried everything I know and still not working
I tried two computers and everytime I start odin it forces stop
The screen is still in Firmware upgrade encountered an issue. Please select recovery mode in kies & try again
and I guess this is the download mode because I restarted it with volume up and down and pluged the usb and it turns to this screen
I downloaded odin again to make sure it runs ok and also tried it in my wifes phone and it runs with no problem
It is one of two cases, ether the phone is completely dead or the files I am using to be installed are not the correct ones
I tried the files on this post:
http://forum.xda-developers.com/showthread.php?t=1414341
Please tell me what to do
I really need the phone...

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

s3 mini does not turn on!!

Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)

Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu

Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!

Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....

When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further

Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.