Database Develop

stuck on samsung logo

hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks

nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
put your phone in download mode , and use odin to reflash a stock rom...then start again

thanks for reply. how can i reflash into stock rom is there any link where it shows the tutorial ?
thanks

nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
Flashing Video Guide for Stock XXJVU

now another problem comes in phone is not going into download mode?
could that b cause of battery gone down to less then 20%?

Your battery should be at least 50% before flashing.

i m not sure at the moment it was 90% before. my phone was going into download mode but i did 1click downloader and instaler at&t firmware and now its not going into download mode ??

You could try this nbkhan : Download Android sdk (google it as i cant post external links in forum yet)
Extract this at the loacation c:\AndroidSDK
Connect phone to PC and Install Drivers
now go to Start > RUN > type cmd
go to this directrory " c:\AndroidSDK\tools "
now type " adb reboot download "
Your phone will reboot and will go into bootmode.
You could also consider building or purchasing a usb jig(google it)

pc does not recognize my phone.

Were you were flashing an ics rom? if so you need nexus drivers installed on your comp which can be found here : w w w.multiupload.co.uk/BUCFT8M42N

hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.

nbkhan said:
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
Click to expand...
Click to collapse
You could try the one click unbrick from here : http://forum.xda-developers.com/showthread.php?t=1153310 , if that does not work you will have to buy/make a usb jig to force download mode.

Jigs are well worth the money, just a couple of £/$ and save your phone.

Galaxy Note fails while booting (yellow triangle)

Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s

Can you exactly give the file name, which you have used to flash PDA section? and size of it

Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888

Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...

Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.

Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated

Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium

dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium

My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?

Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.

Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...

Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium

The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?

Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?

Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.

When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers

I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.

proplem with flashing by odin

i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast

donmedo said:
i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast
Click to expand...
Click to collapse
Pull battery, replace, boot into d/l mode, and Reflash, making sure the firmware you are using has a pit file

listen brother, you need to flash a three parts official rom via odin with re-partition checked that's if you can get into download mode but if you cant you have to use a jig to get you into download mode and if it cant either then tell me to give you another method .... by the way I'm Arabian too

Here's my recovery kit, unzip , read the .txt
http://db.tt/MOGZx01S

[HELP] GT9001 OS ruined with Kies , help please

Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?

If u can access download mode than its not bricked download a stock rom flash it.....
sent from my GT-I9000 using xda premium

this is where I get stuck
http ://img706[DOT]imageshack[DOT]us/img706/8782/30950752[DOT]jpeg , sorry for the lame link I can't post outgoing links yet.
i have no idea what odin version to use or which one works, what ROM to use , all those files are from different sources i dont tink that's right

dualzo said:
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
Click to expand...
Click to collapse
use Kies recovery procedure http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html

Flash a i9001 rom using odin

so I've been trying for 5 hours to fix my semi-bricked phone and I can't do anything .... I've tried with odin 4.43 and some stock ROM-s ... but it gets stuck ... god damn it what should I do , i have no warranty ... GSM service , do they know how to fix things like these? it seems complicated
http[dots]//img18[dot]imageshack.us/img18/6763/96005243[dot]jpg ---> i get stuck with odin here
L.E
So I finally managed to fix it with AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM from sammobile , it took 8 minutes but I had to do it on my laptop. Thanks for everything guys.

Hi,
some time ago i got the same problem But don't worry it's easy to solve..
Just download this one:
http://forum.xda-developers.com/showthread.php?t=1694617
and download this one to get a stock rom:
http://forum.xda-developers.com/showthread.php?t=1032437
or i recommend the broodrom which is based on the valuepack an works just flawless on my i9001
http://forum.xda-developers.com/showthread.php?t=1696381
then copy both .zips to your external sd and then boot into recovery (press vol+ and power button.. wait 3-5sec and release.. when the android thing & a box appears press and hold the home button (the left touchbutton))
if you're now in the recovery mode, click on "install update via zip" or something like that..
then you navigate to your external sd where the 2 files are
then you install the teamwinrecovery (zip file) after that you shutdown your system (pull the battery^^)
then boot again into recovery and you will see a new recovery (it's the teamwinrecovery)
this can be controlled with your touchscreen
now you click again on "install update via zip" or something like that an navigate again to your external sd..
for that you should navigate on the tip level and open a folder called "emmc"
There you install the other zip (it's your rom) an wait until it's finished
it will reboot automatically
If you get stuck in a recovery loop you should flash the bootloader with odin.. (instructions are given in the teamwinrecovery thread)
Good Luck and sorry for my horrible English
You can send me a pm if you have questions

[Q] Galaxy Ace - Download mode and stock rom doesn't work

I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin

fernando15j said:
I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped

Thx bro
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped
Click to expand...
Click to collapse
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:

fernando15j said:
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:
Click to expand...
Click to collapse
No problem! Glad I could help

mahithm said:
No problem! Glad I could help
Click to expand...
Click to collapse
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....

info2shail2010 said:
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....
Click to expand...
Click to collapse
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped

mahithm said:
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
Click to expand...
Click to collapse
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...

info2shail2010 said:
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...
Click to expand...
Click to collapse
I'm so sorry to hear that. I suggested you that option because the user @Baracs was successful in forcing open his Ace's Download Mode using USB Jig. Here is the thread,
USB Jig for Ace
Guess it doesn't work sometimes