proplem with flashing by odin - Galaxy S I9000 Q&A, Help & Troubleshooting

i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast

donmedo said:
i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast
Click to expand...
Click to collapse
Pull battery, replace, boot into d/l mode, and Reflash, making sure the firmware you are using has a pit file

listen brother, you need to flash a three parts official rom via odin with re-partition checked that's if you can get into download mode but if you cant you have to use a jig to get you into download mode and if it cant either then tell me to give you another method .... by the way I'm Arabian too

Here's my recovery kit, unzip , read the .txt
http://db.tt/MOGZx01S

Related

[Q] Stuck at logo screen....help

I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!
Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???
After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.
Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....
I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone
gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes
tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?
2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?
I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm
I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...
Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?
Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje
Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...

please HELP my i9001 is bricked !!!

Hi Guys,
I tried to upgrade rom from 2.3.3 to 2.3.6 got on this forum , using odin 4.43
the port was reconized and the process started but stay locked at 4/12 during 1 hour
so that I had to stop odin and shut down my i9001 from downloading mode .
now when restarting device I get icon showing a phone and a pc with yellow triangle and exclamation point in it .
Please help, what ca I do?
I made a full data+system backup using titanium on my sd card before stating the operation, could it be used ?
thanks in advance !!
Eric
Can you acces download mode? If you can, just try again with odin..
Hi,
You mean it is possible to get dowload mode , even if I got thei triangle pc phone logo ?
You should be able to get into download mode. Get the battery out of your phone and put it back after 10sec, Volume Down + Home + Power Button at the same time will get you in download mode.
It happens a lot that the flash is stuck, especially with large files. Changing USB or PC even will solve the problem.
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
ericcostes said:
thanks Shoomy !
I could get the download mode following your instruction
I will try with another another usb entry when at home .
for odin I have 2 files : one is .ops, the orther is .md5 : can you confirm I dont nead more files to get process ok till the end .
after step2 as I remember I have an odin log line telling something as " big file ..."
so that I wonder if it could work using another usb port !
Click to expand...
Click to collapse
That is fine, MD5 means "one package", so be sure to check One Package and then your .MD5 along with the .OPS and you're good to go. No need for other files.
Thanks Guys !
I could flash my phone with odin 4.43 and 2.3.6 rom .
but the only way to success after many sessions, was to uncheck box " secure OPS file" on odin screen .
thanks a lot
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
mr_guitar_eg said:
Dear All, Please help me,
my Samasung Galaxy s plus is bricked and i cannot turn it on , or even Enter the Download mode?
how can i got it back???
Click to expand...
Click to collapse
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Jaafar U.K. said:
when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
Bon courage copain!
Click to expand...
Click to collapse
That's for softbricks only, not really a brick (just something that makes people panic and think they bricked their phone ). Hardbricks are almost impossible as in: go to a service center and hope they will replace or fix your device (without any cost)...

[Q] I9000 Gingerbread 2.3.3 root gone south, plz help

Hi
I was trying to root my Galaxy with gingerbread 2.3.3.
I installed Odin3 and downloaded CF-Root-XW_NEE_JVH-v3.2-CWM3RFS put the tar in PDA on Odin, restarted my phone, put it into download mode, pluged in the USB, pressed start, and got a failure notice and that there was a Comm error.
I figured that there was not done anything to the phone since there was a comunitation error, so i unplugged the phone and tryed to start it up, but there was only a black screen with a picture of a phone...Triangle with !...and a PC sign.
I then tryed to look on the web for a clue, and someone was writing that Heimdall was so much better to use.
So i downloaded Heimdall-suite-1.3.1-win32 and opend XXJVT_Heimdall.tar in Heimdall, Connected the Phone in download mode and started the prossess, after a few moments i got error in uploading PIT and the whole thing aborted.
When i try to turn off the phone now, notting happens, not even the black screen with the triangle. Its only download mode that works.
Can someone plz help me? im lost!
If download mode works, it's should let u use odin again or not?
Don't worry. Rule of thumb: if you can get into download mode, you're fine.
Download a firmware of your choice (JVS being the newest, I've literally just flashed it). Boot into download mode and flash the firmware. You'll be back to stock. From here, you can install a custom kernel with root.
same kind of issue with me..the only difference cant get into download mode..stuck on the at&t logo..the phone keeps on flashing a white n black screen..any help?

stuck on samsung logo

hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
put your phone in download mode , and use odin to reflash a stock rom...then start again
thanks for reply. how can i reflash into stock rom is there any link where it shows the tutorial ?
thanks
nbkhan said:
hi all
got problem. i used odin for rooting my phone flash some file and now my phone is keeps getting in bootloop and stuck on samsung s gti9000 logo
can some one help me
thanks
Click to expand...
Click to collapse
Flashing Video Guide for Stock XXJVU
now another problem comes in phone is not going into download mode?
could that b cause of battery gone down to less then 20%?
Your battery should be at least 50% before flashing.
i m not sure at the moment it was 90% before. my phone was going into download mode but i did 1click downloader and instaler at&t firmware and now its not going into download mode ??
You could try this nbkhan : Download Android sdk (google it as i cant post external links in forum yet)
Extract this at the loacation c:\AndroidSDK
Connect phone to PC and Install Drivers
now go to Start > RUN > type cmd
go to this directrory " c:\AndroidSDK\tools "
now type " adb reboot download "
Your phone will reboot and will go into bootmode.
You could also consider building or purchasing a usb jig(google it)
pc does not recognize my phone.
Were you were flashing an ics rom? if so you need nexus drivers installed on your comp which can be found here : w w w.multiupload.co.uk/BUCFT8M42N
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
nbkhan said:
hi
odin dont recognize the phone when i turn on the phone or try to go to download mode just at&t logo comes on and then go blank then comes on again. my phone is not rooted or any thing. i used to root that dont rember how but after that it just dont boot. it was going into download mode before but i use odin 1 click downloader now no download mode.
Click to expand...
Click to collapse
You could try the one click unbrick from here : http://forum.xda-developers.com/showthread.php?t=1153310 , if that does not work you will have to buy/make a usb jig to force download mode.
Jigs are well worth the money, just a couple of £/$ and save your phone.

help bricked phone

Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.

Categories

Resources