I have a XT1060 (Dev Ed), running Lollipop 5.1, it's rooted, has xposed, and TWRP. I got a notification for a system update, would it be okay for me to do the update? Or would it soft/hard brick my phone?
Asisentr said:
I have a XT1060 (Dev Ed), running Lollipop 5.1, it's rooted, has xposed, and TWRP. I got a notification for a system update, would it be okay for me to do the update? Or would it soft/hard brick my phone?
Click to expand...
Click to collapse
I'm in the same boat (although mine is not dev edition, I have unlocked the bootloader & rooted running xposed) and would love an answer!
So I attempted to install it since no one was giving me any warnings, I flashed it back to the custom recovery, and now my phone is in a bootloop.
Asisentr said:
So I attempted to install it since no one was giving me any warnings, I flashed it back to the custom recovery, and now my phone is in a bootloop.
Click to expand...
Click to collapse
You can't update if you've modified the system partition, ex. being rooted, having xposed etc.To update you need to be completely stock.
I received the same notification on my XT1060DEV. I chose to ignore it.
Anyone know what the update is for? Someone posted in the general section to "never update a rooted unlocked XT1060 ever" because it bricked it or something. My guess is they didn't know what they were doing. I've been having issues lately with my XT1060 not wanting to connect to 2.4GHz wireless networks, only 5GHz. I've tried removing apps one-at-a-time but no luck. Maybe a reset back to square one and the update is due.
Not sure what the update is for though.
So I'm unlocked and rooted on 5.1 with TWRP... but I don't have stock recovery. XT1060 verizon dev edition doesn't have a stock recovery for anything but 4.4.4. So how do I flash recovery to take the update? I'm assuming that flashing recovery from 4.4.4 is a bad idea? If so, what's the solution?
i have 2 1060s one is retail 16 gb (one daughter) the oher is 32 gig dev tooted twrp expoesd. dev daugher tried to do the update it failed and hten she rebooted. it kept tying to apply booting to recovery after 3 minutes and and failing until I removed the update form cache.
I shoul have captured it so I could examine and fix the script.
retail 16 gb updated just fine.
anybody know what this is?
if it not an image maybe we can apply the frixes directly
Mike7143 said:
Anyone know what the update is for?.......
Not sure what the update is for though.
Click to expand...
Click to collapse
Its the security update patch upto 1st April, 2016.
https://motorola-global-portal.cust...detail/a_id/110538/p/30,6720,8696/reg/1417809
I'm on completely stock 5.1 ROM but I have TWRP 2.8.7.0, Xposed installed. So in order for OTA to succeed I'll have to undo all the modifications including the removal of Xposed? The other changes I've made to the system are the removal of some of the Motorola bloatware.
The trick is now to get the right SBF from Motorola.
Yeah to take the ota you gotta go back to stock. Honestly, I ended up just dong a factory reset, downloaded a marshmallow ROM for my xt1060, and that was that!
Mike7143 said:
Yeah to take the ota you gotta go back to stock. Honestly, I ended up just dong a factory reset, downloaded a marshmallow ROM for my xt1060, and that was that!
Click to expand...
Click to collapse
Marshmallow?!
So far it's not to bad.
What do you mean by Marshmallow update!? This is just a security update so it should still be Lollipop.
Asisentr said:
So I attempted to install it since no one was giving me any warnings, I flashed it back to the custom recovery, and now my phone is in a bootloop.
Click to expand...
Click to collapse
If you are boot-looping after trying the update with TWRP, you will have to delete the update file using TWRP.
From the TWRP main menu, Choose Advanced, then File Manager.
Go into /cache, and delete the Blur_Versionxxxxblahblahblah.zip file.
That'll stop your boot loop.
Related
I have a question. Last night I went to about phone and check for an update and there it was 5.01 I selected to install it then it said it was going to restart and then banner went away and the phone never restarted. I tried checking for update again and its not there anymore plus my phone is at 5.0 . I was wondering if anyone has experienced this and what the solution was. Also If I where to update it manually will that mess anything up with my updates of were I get it from now. So for example my phone is from Motorola where does it get its updates from same place as Google play store? So I ask this because I think the people who post the updates they are for Google play edition and I don't want to turn my phone into Google play edition if its different from the Motorola version.
Thanks,
You're not alone. Several threads on this in general forum and Q&A. Consensus so far is hang tight and the update should resurface.
Sent from my Nexus 6 using XDA Free mobile app
Factory image is still on Google website. Grab it there.
bluh5d said:
I have a question. Last night I went to about phone and check for an update and there it was 5.01 I selected to install it then it said it was going to restart and then banner went away and the phone never restarted. I tried checking for update again and its not there anymore plus my phone is at 5.0 . I was wondering if anyone has experienced this and what the solution was. Also If I where to update it manually will that mess anything up with my updates of were I get it from now. So for example my phone is from Motorola where does it get its updates from same place as Google play store? So I ask this because I think the people who post the updates they are for Google play edition and I don't want to turn my phone into Google play edition if its different from the Motorola version.
Thanks,
Click to expand...
Click to collapse
Same thing happened here, I assumed it was due to me having unlocked bootloader & custom recovery. So I just manually flashed the factory image update using ADB. Easy peasy. You can do the same.
Cheers
If I manually flash the image will it change where my future otas come from ? Like doesnt a motorola nexus 6 updates come from a different server than a google play nexus 6 ?
Same thing for me, except I was waiting to be able to charge up my phone before installing. By the time I got to a charger it was gone. I'll probably just wait for it to resurface.
Same same here. Fully stock. Is the common theme for people experiencing this that they are on VZW? I am. Tmo bought phone with VZW sim.
Fyi, rebooting and charging havent helped.
I know i can manually update, but I'm hoping to confirm that the OTA process still works correctly with my stock phone running on VZW.
Its not only VZW.. I'm T-Mobile and the same happened
SirRastusBear said:
Same thing happened here, I assumed it was due to me having unlocked bootloader & custom recovery. So I just manually flashed the factory image update using ADB. Easy peasy. You can do the same.
Cheers
Click to expand...
Click to collapse
Did you flash the 5.0.1 completely (all partitions), or did you just flash system.img to get the 5.0.1 update? I'm trying to figure out the easiest way to get from 5.0 to 5.0.1 since I'm (stock) rooted and have thus modified the system partition, so can't do the OTA.
mlevin said:
Did you flash the 5.0.1 completely (all partitions), or did you just flash system.img to get the 5.0.1 update? I'm trying to figure out the easiest way to get from 5.0 to 5.0.1 since I'm (stock) rooted and have thus modified the system partition, so can't do the OTA.
Click to expand...
Click to collapse
Flashed each separately.
Flash bootloader image
Reboot bootloader (important)
Flash radio image
Flash recovery image
Flash boot image
Flash system image (takes a while)
Flash userdata image ONLY if you want to wipe your own data
Reboot when done
Flash custom recovery
Install SuperSU from custom recovery
Reboot
Profit
Cheers
Those like me who don't want to manually flash.. I just got off the phone with Google, and apparently within 24-48 hours the update will be available again for those devices affected by this hiccup. I'll wait.
Have the VZW G2 rooted on the previous OTA update, now starting to see the nag screen to update again.
Last time, I reverted to stock and had to set up everything again from scratch. I needed root so did that but now at the same point again.
Is there an easier way to update, without having to wipe everything and start over again?
TIA
I was rooted and just installed the update. Went through fine and kept root. All my had to do was install/update xposed framework and reboot to get my modules working again. Aside from xposed I had no modified system files and stock recovery. I had not uninstalled any pre-installed apps, just have a few frozen with titanium.
How did you install the update? I tried the OTA path and it gave some hex error after the reboot
wujuyamakin said:
How did you install the update? I tried the OTA path and it gave some hex error after the reboot
Click to expand...
Click to collapse
If you find a solution would you kind enough to share? Ive been delaying my install and when i finally decided to do it, it errors.
wujuyamakin said:
Have the VZW G2 rooted on the previous OTA update, now starting to see the nag screen to update again.
Last time, I reverted to stock and had to set up everything again from scratch. I needed root so did that but now at the same point again.
Is there an easier way to update, without having to wipe everything and start over again?
TIA
Click to expand...
Click to collapse
Other than root, are you stock? If so, should be able to take ota with non issue. If you modded wifi hotspot, need to change it back for ota. Did you also install custom recovery?
wujuyamakin said:
How did you install the update? I tried the OTA path and it gave some hex error after the reboot
Click to expand...
Click to collapse
I didn't have any errors but I have no system files modded.
Thanks mhirsh, you nailed it. I had to restore the stock wifi hotspot app, do OTA update, then do the steps for wifi hotspot again.
It's actually the only root feature I've used for quite a while now. The root uninstallers I've tried have all failed to remove bloatware. I'll be looking at other root benefits to get more use out of it.
And to think I spent days restoring my phone from scratch last update ... lol.
wujuyamakin said:
Thanks mhirsh, you nailed it. I had to restore the stock wifi hotspot app, do OTA update, then do the steps for wifi hotspot again.
It's actually the only root feature I've used for quite a while now. The root uninstallers I've tried have all failed to remove bloatware. I'll be looking at other root benefits to get more use out of it.
And to think I spent days restoring my phone from scratch last update ... lol.
Click to expand...
Click to collapse
I tired this with no success. So i didnt delete my stock wifi hotspots (apk and odex) just renamed them. I removed my modded one and switched back to original names, rebooted, downloaded ota and it errored when it tried to install. Am i missing a step? Thanks in advance
lg g2 Verizon ota update with twrp
I have tried to do the ota Verizon update and get stuck in twrp . It won't reboot after that. I found the commands to get it to reboot on this site but it won't do the update. I'm new to all of this and still learning . please help me figure this out. Thanks
wrayzor71 said:
I have tried to do the ota Verizon update and get stuck in twrp . It won't reboot after that. I found the commands to get it to reboot on this site but it won't do the update. I'm new to all of this and still learning . please help me figure this out. Thanks
Click to expand...
Click to collapse
I couldn't get the OTA update to work until I went back to stock and unrooted. I was rooted with stock except I had performed the audio mod and the tethering mod which modified system files. Once I unrooted and factory reset to stock everything updated fine. haven't rooted again yet kind of waiting for stock lollipop OTA update to show up soon.
wrayzor71 said:
I have tried to do the ota Verizon update and get stuck in twrp . It won't reboot after that. I found the commands to get it to reboot on this site but it won't do the update. I'm new to all of this and still learning . please help me figure this out. Thanks
Click to expand...
Click to collapse
TheJuicer said:
I couldn't get the OTA update to work until I went back to stock and unrooted. I was rooted with stock except I had performed the audio mod and the tethering mod which modified system files. Once I unrooted and factory reset to stock everything updated fine. haven't rooted again yet kind of waiting for stock lollipop OTA update to show up soon.
Click to expand...
Click to collapse
You should never attempt OTA unless you are stock (having only root will be ok).
Yeah i had forgotten i had performed those mods after i rooted. Initially i thought i was just stock and rooted. Thankfully pretty easy to go back to stock.
Today my XT1068 offered me the 22.26.1.en.GB update, but it's failing to install.
The phone reboots and attempts to install the update. The progress bar gets to approximately 1/4 to 1/3 of the way across before a red triangle appears and the phone reboots back to KitKat.
My phone was rooted (using SuperSU), but I used SuperSU's built-in clean-up feature to unroot my phone before applying the Lollipop update.
The bootloader is unlocked, but the recovery is stock; I did not install a custom recovery but instead booted TWRP temporarily to install SuperSU.
I'm comfortable fiddling with adb and fastboot, and with digging around the filesystem. Any suggestions of where I can look to find any error messages which might shed some light on why the update failed? Could the failure be related to the previous rooting of my phone, or could something else be breaking the update?
@Loganberry
Have you modified /system files in any way?
If yes you have to restore them back.
If nothing helps, with unlocked bootloader it's propably much faster to just flash your stock firmware again and do ota than to search why it doesn't work.
I can confirm that ota update can be performed on rooted phone .I was thinking that is not possible but I was curious and tried.
I was on unlocked bootloader and rooted KK , german firmware 21.85.23 with instaled xposed framework and gravity box.
Update was successful without any error and for now everything work ok.
Loganberry said:
Today my XT1068 offered me the 22.26.1.en.GB update, but it's failing to install.
The phone reboots and attempts to install the update. The progress bar gets to approximately 1/4 to 1/3 of the way across before a red triangle appears and the phone reboots back to KitKat.
My phone was rooted (using SuperSU), but I used SuperSU's built-in clean-up feature to unroot my phone before applying the Lollipop update.
The bootloader is unlocked, but the recovery is stock; I did not install a custom recovery but instead booted TWRP temporarily to install SuperSU.
I'm comfortable fiddling with adb and fastboot, and with digging around the filesystem. Any suggestions of where I can look to find any error messages which might shed some light on why the update failed? Could the failure be related to the previous rooting of my phone, or could something else be breaking the update?
Click to expand...
Click to collapse
flash the GB 4.4.4 in my signature then try to update OTA again
dpdp73 said:
@Loganberry
Have you modified /system files in any way?
If yes you have to restore them back.
If nothing helps, with unlocked bootloader it's propably much faster to just flash your stock firmware again and do ota than to search why it doesn't work.
Click to expand...
Click to collapse
reefuge said:
flash the GB 4.4.4 in my signature then try to update OTA again
Click to expand...
Click to collapse
Yeah, I'd forgotten about Busybox and a couple other apps which modifed /system. Reflashing from scratch was the easier option.
I flashed GB 4.4.4 as advised and the Lollipop update then applied without any problems. Thanks for the assistance.
Hi
I've run into a problem while trying to update my Moto X (gen 1) XT1053 from 4.4.4. to 5.1. through standard OTA update. Here is the scenario:
- My phone is not unlocked or rooted, nor does it have modified firmware of any type. It is a fully stock XT1053 purchased directly from Motorola in the US that I have not tinkered with in anyway
- My phone downloaded and applied the update on Saturday morning and after the first section of the install rebooted. It sat at the screen with the M and "powered by android" at the bottom and vibrated once, then the screen went off, the same screen came back on and the phone vibrated again. Then an Android on it's back with a red exclamation and "Command" was shown.
- I figured out how to get into the recovery menu and wiped the cache, rebooted and no change. I then attempted to factory reset the phone, it did this but again no change.
- I spoke with a Motorola chat representative who was unable to help but I managed to follow some instructions on this forum to enter the fast boot menu, download and re-flash android stock 4.4.4 using RSDlite and get the phone working again.
- The phone attempted to apply the 5.1 update again yesterday and encountered the same issue again.
Would anyone have any ideas about what could be going wrong with the update process? Or ways that I can go about getting this to install correctly. The motorola rep seemed to think it was to do with my carrier, but as it was downloaded over wifi can this be the case?
If not, would anyone know how to stop android from continously prompting me to update to 5.1? I'm happy to remain on 4.4.4. if it means the phone will still remain functional.
Thanks in advance for your help.
Did you try going to settings and about phone, update
Sent from my Nexus 4 using Tapatalk
Correct, the update was applied through settings > about phone > system update
Delta117nz said:
Would anyone have any ideas about what could be going wrong with the update process? Or ways that I can go about getting this to install correctly. The motorola rep seemed to think it was to do with my carrier, but as it was downloaded over wifi can this be the case?
If not, would anyone know how to stop android from continously prompting me to update to 5.1? I'm happy to remain on 4.4.4. if it means the phone will still remain functional.
Thanks in advance for your help.
Click to expand...
Click to collapse
If you prefer to stay with a working 4.4.4 then you can try disabling some apps related to the OTA, like I think Motorola OTA used to be there although I don't see it now in 5.1, or Motorola Update Services, which now looks like you can't disable but anything you can't disable you can try unchecking "Show Notifications", and so on. if you check around the forum you'll find something that works.
On the other hand if you want to try to get 5.1 working you could try applying the OTA from recovery. while on 4.4.4 you download the OTA (see this post http://forum.xda-developers.com/showpost.php?p=61304089&postcount=864 ) and then boot into stock recovery and choose to apply update from sd. hopefully it will work that way. ***Be aware however that by going from your failed 5.1 update back down to 4.4.4 as you said you did, you have put your phone at risk of bricking when you try to go back up to 5.1. since you've already tried it once, you might be willing to try it again, but just know that there is that risk and its on you if it bricks and you lose your working 4.4.4
Oh and you do have another option, you can stay on 4.4.4 until Motorola releases the whole 5.1 firmware or someone managed to get it, then you can flash 5.1 firmware with rsdlite like you did with 4.4.4
dtg7 said:
If you prefer to stay with a working 4.4.4 then you can try disabling some apps related to the OTA, like I think Motorola OTA used to be there although I don't see it now in 5.1, or Motorola Update Services, which now looks like you can't disable but anything you can't disable you can try unchecking "Show Notifications", and so on. if you check around the forum you'll find something that works.
On the other hand if you want to try to get 5.1 working you could try applying the OTA from recovery. while on 4.4.4 you download the OTA (see this post http://forum.xda-developers.com/showpost.php?p=61304089&postcount=864 ) and then boot into stock recovery and choose to apply update from sd. hopefully it will work that way. ***Be aware however that by going from your failed 5.1 update back down to 4.4.4 as you said you did, you have put your phone at risk of bricking when you try to go back up to 5.1. since you've already tried it once, you might be willing to try it again, but just know that there is that risk and its on you if it bricks and you lose your working 4.4.4
Oh and you do have another option, you can stay on 4.4.4 until Motorola releases the whole 5.1 firmware or someone managed to get it, then you can flash 5.1 firmware with rsdlite like you did with 4.4.4
Click to expand...
Click to collapse
Thanks dtg7, I'll give that a try in the next day or so (updating via the recovery menu) otherwise will hold out for the 5.1 firmware and try RSDlite again.
dtg7 said:
If you prefer to stay with a working 4.4.4 then you can try disabling some apps related to the OTA, like I think Motorola OTA used to be there although I don't see it now in 5.1, or Motorola Update Services, which now looks like you can't disable but anything you can't disable you can try unchecking "Show Notifications", and so on. if you check around the forum you'll find something that works.
On the other hand if you want to try to get 5.1 working you could try applying the OTA from recovery. while on 4.4.4 you download the OTA (see this post http://forum.xda-developers.com/showpost.php?p=61304089&postcount=864 ) and then boot into stock recovery and choose to apply update from sd. hopefully it will work that way. ***Be aware however that by going from your failed 5.1 update back down to 4.4.4 as you said you did, you have put your phone at risk of bricking when you try to go back up to 5.1. since you've already tried it once, you might be willing to try it again, but just know that there is that risk and its on you if it bricks and you lose your working 4.4.4
Oh and you do have another option, you can stay on 4.4.4 until Motorola releases the whole 5.1 firmware or someone managed to get it, then you can flash 5.1 firmware with rsdlite like you did with 4.4.4
Click to expand...
Click to collapse
Worked perfectly downloading the OTA update and applying through the recovery screen. Thanks for your help
I have a Droid Turbo that is currently on version 5.1 (23.21.44) and I just recently unfroze the system update notifications for my phone because of the news of MM. I am currently rooted and have an unlocked bootloader but I don't have TWRP installed and would rather not install it for now if I don't have to.
The system update that it is trying to push to my phone isn't MM, instead it is version 23.21.49.en.US. Is it safe to just take this update while being rooted and with an unlocked bootloader? I'm also not sure how many updates I'll have to make my way through before reaching the MM update, but if there are other updates, should it also be safe to go ahead with those as well? I know I could install TWRP and flash the MM ROM that way but I would prefer to do the updates officially if it is not risking a bricked phone.
Thanks for any advice.
EDIT: I forgot to finish the title of the thread...
AirJordanTS said:
I have a Droid Turbo that is currently on version 5.1 (23.21.44) and I just recently unfroze the system update notifications for my phone because of the news of MM. I am currently rooted and have an unlocked bootloader but I don't have TWRP installed and would rather not install it for now if I don't have to.
The system update that it is trying to push to my phone isn't MM, instead it is version 23.21.49.en.US. Is it safe to just take this update while being rooted and with an unlocked bootloader? I'm also not sure how many updates I'll have to make my way through before reaching the MM update, but if there are other updates, should it also be safe to go ahead with those as well? I know I could install TWRP and flash the MM ROM that way but I would prefer to do the updates officially if it is not risking a bricked phone.
Thanks for any advice.
EDIT: I forgot to finish the title of the thread...
Click to expand...
Click to collapse
It's safe, but it will be unsuccessful until you unroot your phone and undo any other system modifications that you've done (xposed, for example). There's a huge part of the update script that checks every single file in your system partition to make sure nothing has been modified.
Ok great, thanks.
The only other modification I can think that I've made is enabling mobile Hotspot through editing a setting somewhere. Do you know if that would be affected or would need changed back?
AirJordanTS said:
Ok great, thanks.
The only other modification I can think that I've made is enabling mobile Hotspot through editing a setting somewhere. Do you know if that would be affected or would need changed back?
Click to expand...
Click to collapse
You did that by modifying /system/build.prop. That change might be okay, but I would change it back if I were you just to be safe. The change is going to be overwritten anyway once the OTA is done.
AirJordanTS said:
Ok great, thanks.
The only other modification I can think that I've made is enabling mobile Hotspot through editing a setting somewhere. Do you know if that would be affected or would need changed back?
Click to expand...
Click to collapse
It's possible it may miss overlooking that. The worst that could happen was the update just doesn't take. It fails and nothing is changed. There is a pure MM official version that you can Flash in TWRP. It will update everything, radios and all, but will not relock the bootloader. I recommend you download Titanium Backup and backup all of your apps and their data to be restored after the update. A factory reset is recommended after the update. Also, don't forget to back up all of your photos, documents, music, etc. 24.81.5 is MM. Your update was a prep for MM.
Thanks for the advice guys.
I didn't realize it but I had TWRP installed so I decided to flash a stock ROM and proceed with the OTA updates from there. The problem currently is that I'm being locked out of my phone because of the Google "verify your account" page. I reset my account password on that page and now I'm not able to log in.