Database Develop

HEEELP !!! My Galaxy Tab freeze in Samsung logo !!!!

Please help me !!!!
My glxy Tab P1000 work fine !!!
I try to upgrad to 2.3.3 by using firmware P1000JPJPC, using odin 1.7
In the first, i use P1_EUR.pit and i use "Re-Partition" ( the flash process is aborted – fail !!!)
I retry by using "P1_add_hidden.pit and i use "Re-Partition" ( The flash process success – pass) the tab restart in recovery and show error !!! in restart the tab is freeze in glaxy logo !!!!
I try many firmware (differente region and version) an all "PIT" fliles the sam result !!! freeze !!!
I use ROTO-JME for p1000 and the same result !!!!!
I try to remove battry, and not any result !!!
Please help me !!!! i read may tuto in this forum and other and i use many solution, not result !!!!!
For information, the tab is put in download mode !!! (no problem)
HEEEEEEEEEELP !!!

I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE

hope you solve your problem buddy

omr911 said:
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
Click to expand...
Click to collapse
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!

Did you wipe all things?
Which errors do you have in recovery mode?

dynamitor said:
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Click to expand...
Click to collapse
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time

gtUser1000 said:
Did you wipe all things?
Which errors do you have in recovery mode?
Click to expand...
Click to collapse
after flash firmware P1000JPJPC, thi error

Try installing Overcome ROM. It's one of the best.
Go here and follow the guide http://p1000.teamovercome.net/?page_id=64
The guide is very well done and easy to follow. Just make sure you don't skip anything. All the needed files are there.
Good luck and keep us posted how it went.
Sent from my GT-P1000 using XDA Premium App

did you edit a file or the zipfile?
May you have damaged the zip or the config file, it looks like it isnt linux conform anymore.
if you didnt change anything you should try to redownload it or use a rom like the overcome ones.

May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps

omr911 said:
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
Click to expand...
Click to collapse
I wait, wait and ait few hors !!! teh same problem !! freeze !!!

Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck

ayong chia said:
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
Click to expand...
Click to collapse
I start from a Froyo, and i folow tuto from overcom step by step, the problem, is after restart !!! after download and flash "001001-GB-Stock-Safe-v5.zip" with "gt-p1000_mr.pit", the tabs show error in picture 01, no the same error show in tutorial from overcom !!!!
In overcom tuto, the install update is successfully !!! in my tab, the istall updte is aborted !!!! show the picture !!!!
After, the tab freeze in galxy tab logo !!!!!

tupo05 said:
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
Click to expand...
Click to collapse
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!

dynamitor said:
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
Click to expand...
Click to collapse
Hummm That's weird man. Are you sure you are following all the steps in the tuto ? Including the part about bootloader and some possible patch ? Because that could be the problem you are having. Just read the guide carefully please and try again.

thanks for your help my friends, i finaly repir my galaxy tab !!!
the solution :
i flash my tab with this firmware "P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5" and "gt-p1000_mr.pit"
aftern no error in recovery !!! and the tab start normaly !!! and after i try to reflash my phone with "001001-GB-Stock-Safe-v5.zip" for teste only !!! after no errore in recovery !!! I noticed the first firwmare are repair my tab !!!!
i find this stock firm in this thread :
http://forum.xda-developers.com/showthread.php?p=18410689
and link for this firmare is :
http://www.multiupload.com/IVKH1NMW7C
and I hope that my experiences and your posts will help others!

Glad to hear that you are up and running dude.
Sent from my GT-P1000 using XDA Premium App

Problem my phone is stuck on download mode.

I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.

Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full

JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.

Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje

Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?

grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck

grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .

ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent

grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download

Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.

grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .

@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.

dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.

@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.

help Bootloop problem !

I have my s3 (i9305) with a boot loop problem .
It can be booted to download mode or recovery mode .
But I cannot flash it and something wrong in recovery mode with the photo below .
Can anyone help ?

tommyvca said:
I have my s3 (i9305) with a boot loop problem .
It can be booted to download mode or recovery mode .
But I cannot flash it and something wrong in recovery mode with the photo below .
Can anyone help ?
Click to expand...
Click to collapse
I would go to sammobile.com and download the stock rom for your region. Unpack the .zip file then flash the .tar file via odin

noppy22 said:
I would go to sammobile.com and download the stock rom for your region. Unpack the .zip file then flash the .tar file via odin
Click to expand...
Click to collapse
It is not work . It get fail using odin . Nand write start , then failed,

tommyvca said:
It is not work . It get fail using odin . Nand write start , then failed,
Click to expand...
Click to collapse
Sorry to say but it sounds like you have nand corruption. I have heard of people using a pit file to get around the problem, but I don't know much about repartitioning. You could try searching xda or googling pit files or nand write fail, but to my knowledge you may need a new motherboard. You could just take it to a service centre and see how much it will cost. Good luck

noppy22 said:
Sorry to say but it sounds like you have nand corruption. I have heard of people using a pit file to get around the problem, but I don't know much about repartitioning. You could try searching xda or googling pit files or nand write fail, but to my knowledge you may need a new motherboard. You could just take it to a service centre and see how much it will cost. Good luck
Click to expand...
Click to collapse
I have tried to flash pit . It also stcuks . Really no way to fix it ?

tommyvca said:
I have tried to flash pit . It also stcuks . Really no way to fix it ?
Click to expand...
Click to collapse
What odin you're use? Try with: Odin3_v3.09, with this: I9305XXUFNL1_I9305LUXFOB1_LUX
or
Download and install other recovery like: TWRP
and try to flash: This zips (attention: you lose all files from internal memory)
(try this method first time)
hmm.

please help big problem

Hi guys
I flashed a wrong modem file in recovery and
my phone(i9070) dosnt power on
I flashed a frimware but my phone error setup wizard stoped
and also in recovery error cant mount efs
And cant mount boot cause
And cant mount boot log
Please help me i dont what to do
Telegram.me/reza2999

Try this: http://forum.xda-developers.com/showpost.php?p=43324021&postcount=9

this dosent worked for me
please help

REZADEZ said:
this dosent worked for me
please help
Click to expand...
Click to collapse
Cant you go in download mode ?

no need to worry
1. boot your phone in the download mode.
2. Flash your stock rom(can be downloaded from sammobile) with the help of odin in your pc.
3. Good Luck.

mohitsaladiya said:
1. boot your phone in the download mode.
2. Flash your stock rom(can be downloaded from sammobile) with the help of odin in your pc.
3. Good Luck.
Click to expand...
Click to collapse
I do it several times but it dosent work

Plzzz note 9 bricked efs

I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]

Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?

willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
I used a tool to fix baseband the tool reboot my phone into download mode and flash something
i try to boot my phone it get bootloop i try flash stock rom still bootloop
i flashed combination file still bootloop
i think the tool did something to efs partition

Did you complete a backup with TWRP?

willhemmens said:
did you complete a backup with twrp?
Click to expand...
Click to collapse
no i didint flash twrp my device not rooted

devil499 said:
no i didint flash twrp my device not rooted
Click to expand...
Click to collapse
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk

Good luck dude when the mention above most really suck having a bricked note 9

jaylence said:
You shouldn't have used any tool.
You could have easily recovered your unknown baseband by simply flashing your stock firmware.
Retry flashing the Stock firmware. But this time, do a wipe cache partition, wipe data/factory reset in recovery mode first.
Use the latest stock firmware that is available for your country/CSC.
If you can find a pit file, include that in odin flash with the stock firmware. Put a checkmark on the "repartition" option.
It's normal for the device to take 5-10 minutes or more during the initial boot.
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
i have done that but didnt worked
plz help me
i didint find pit file for my device
n960f

HtcOnekid said:
Good luck dude when the mention above most really suck having a bricked note 9
Click to expand...
Click to collapse
i found this post https://forum.xda-developers.com/ga...ide-fix-n950f-efs-failed-to-mount-dm-t3831184
i beg you can you plz help understand it
Extract Stock firmware AP file (rename .md5 to .tar)
this i cant understand wich should i rename or what i do
Rename dqmdbg.img to efs.img (or smallest image must be smaller than 8000 KB). Extract Dqmdbg.img.lz4 so it’s just “Dqmdbg.img” and then rename it to efs.img and put that one in a tar. Other option is downloading a file that’s already made this way if your bootloader is binary 4, Saves you trouble of extracting / renaming: http://www.mediafire.com/file/589wuc...f/efs.tar/file (if you download this file just move onto number 3)
Add file new efs.img into tar archive.
Flash tar as AP file in odin + download mode
Reboot download mode
Flash Combination with odin + nand erase option on Edit: suggest you to flash stock rom first and oem unlock, don't need to wait for 7 days if imei is 0000 skip combination step
Device Should boot into Factory binary
Use IME to restore imei using *#06# (or imei 0000 in stock rom) Edit: This step is not required if efs backup is restored successful
Your device should have dm-verify failed in recovery due to drk error
Continue drk bypass for dm verify error below to continue

willhemmens said:
Make you post readable for everyone using the dark theme and you might get more response.
What exactly did you flash with Odin and what happened, other than it didn't work?
Click to expand...
Click to collapse
What? I'm using desktop. Is there a different view on mobile?

Bricked Note 9 due to efs
devil499 said:
I try to use sam fix tool to get my baseband (unknown) and sim cad imei fixed
i use the tool and choose baseband fix it boot into donwload mode and flash something
after that my note 9 stuck bootloop
i flashed stock frimware using odin and didnt work
i flashed combination file and also got bootloop
i can go to download mode
but whatever i do my phone stuck bootloop
plz need help plz guys
BUT I MADE A EFS BACKUB USING SCRIPT CMD IT CREAT A FLASH FILE CAN BE FLASHED USING ODIN VIA AP
BUT I CAN ACCESS IT RIGHT NOW BECASE I HAVE IT IN MY WORK
IS THAT ABLE TO HELP ME FIX THE PROBLEME[/COLOR]
Click to expand...
Click to collapse
I have the same problem with my note 9. Im looking if anyone can provide me with efs file of N960F Binary 3 so i can get it unbricked again.
I found this website but it has efs files for binary 1 and 2 not 3. Will it still work if i use binary 2 efs?
//frpdone.com/efs-mdm-samsung/
Did u find a solution?