Tried to update my Galaxy S6 Edge, Android 5.1.1, Baseband G925AUCU3BOI2, but i'm getting this error using Odin with G925AUCU1AOCE.
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have tried different cables, different com ports and still the same problem. I was able to revert to stock rom and worked flawless with Odin, but when trying to update with the marshmallow rom it's giving me this error.
Appreciate the help. :fingers-crossed:
flash oj9 , why are u flashing oce?
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Hi, i did flash it to OJ9 now, but i'm unable to sideload marshmallow on it.
what is the problem exactly, like why are u unable to sideload?
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
I can't sideload the zip file, most of the time it states that it couldn't read the zip file, while another time it was stating to load but got the "signature verification failed" and it erases my zip file to 1kb. I've used Android Studio and Minimal ADB and in both cases have the same results.
place the zip file in the C and try again
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
kapooo3 said:
place the zip file in the C and try again
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Click to expand...
Click to collapse
Still getting the signature verification error... Damn! Really frustrating, i'm using a Windows 10 64bit edition... don't know if that might be causing the error... Need help... We don't know when the Odin files for Marshmallow might show up..
i have the same as u , what i did was move the file to c/ computer thats all , the adb got it and it worked
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Related
Beware when trying the new firmware from Taiwan if you were already on one based on the latest NZ one.
tries several times and ODIN failed just after trying to flash hidden.img
Tried several times, no luck.
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I reflashed the NZ firmware afterwards and could recover. But this is a real pain... (Obviously had to re-root, reinstall TWRP, etc...) I supposed we wont have this issue through custom ROMs
Do you have reactivation lock enabled? Seems to have been the issue for others
absinthesummer said:
Do you have reactivation lock enabled? Seems to have been the issue for others
Click to expand...
Click to collapse
Thanks. It's not enabled actually.
Sent from my SM-N910U using XDA Free mobile app
Alcibiade said:
Thanks. It's not enabled actually.
Sent from my SM-N910U using XDA Free mobile app
Click to expand...
Click to collapse
OK I think that's my fault for skimming over a bit. I thought you were asking a question not making a statement
absinthesummer said:
OK I think that's my fault for skimming over a bit. I thought you were asking a question not making a statement
Click to expand...
Click to collapse
Indeed was just warning people looking to upgrade to be careful if they don't want to waste their time
Thanks anyway!
Sent from my SM-N910U using XDA Free mobile app
This happens with the note 4 usb cable sometimes i changed to a s3 cable and it doesnt stop anymore ive done lots of odin flashing including the latest Taiwan fw
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/ i can confirm that this solution works!
Hi All
ATM I have a bootloop but can connect using Odin to flash.
I was on Nameless ROM
Having trouble finding ANY suitable roms in .md5.tar format
Any help would be great, dont wanna lose this little beauty
HB
Hamsterboy2000 said:
Hi All
ATM I have a bootloop but can connect using Odin to flash.
I was on Nameless ROM
Having trouble finding ANY suitable roms in .md5.tar format
Any help would be great, dont wanna lose this little beauty
HB
Click to expand...
Click to collapse
Would it be ok to ask a ROM DEV to make a version I could flash with Odin?
Hamsterboy2000 said:
Would it be ok to ask a ROM DEV to make a version I could flash with Odin?
Click to expand...
Click to collapse
Just download stock rom from sammobile.com, extract the .zip then flash the .tar file with odin
Thanks so much
Done alot of flashin but haven't used Odin since I rooted .
Cheers for the advice.....off to SAMMY I go
HB
Ok well everything was going great upto the last few seconds where Odin failed...
Message log was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> tz.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried repeating it but no joy.
Anyone got an idea where I go next?
Cheers
HB
Ok managed to flash Philz_touch and it looked like it's just a matter of choosing a rom on the sd card and installing just like CWM but all the roms fail saying something similar to......
"ApplyParsedPerms: lsetfilecon os /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
set_metadata_recursive: some changed failed
E: Error in /external_sd/ROMS/nameless-5.0.2-20150318-i9305.zip
(Status 7)
Installation aborted
press any key to continue"
Is there anything else I can do to get a rom on this device.
Try another ROM maybe?
Cheers for any help
HB
What version of philz are you using? You need to be using one of the latest ones Cwm 6.0.4.4 at least. I only say this because status 7 error is normally because of an outdated recovery.
Sent from my GT-I9305 using XDA Free mobile app
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Sonicboom9004 said:
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Click to expand...
Click to collapse
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
xmayhemreturnsx said:
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
I've downloaded the T-mobile 5.1.1 version because I have not found a MetroPCS version. I hope that is the version I had before.
I downloaded it from here: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387 (the first link)
EDIT: Currently going to try this out. I'll let you know if it works or not: http://forum.xda-developers.com/tmo...x-recovery-seandroid-enforcing-error-t3144011
EDIT 2: Doesn't work it just says md5 file invalid. Binary Check Failed.
EDIT 3: FIXED MY PHONE I just used the latest version of 5.1.1. Thanks for pointing me in the right direction xmayhemreturnsx. Link for the latest version for anyone else who needs help:http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Great.
A littlr more information would help us help you.
Which version of Odin, what is failing, what if any messages are Odin or the device giving you?
kvadde said:
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Click to expand...
Click to collapse
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
The only reason why you would get issues flashing a stock firmware with odin is if the firmware isn't intended for your device.
Odin is quite smart and can prevent you from bricking your device.
I try to flash this one T810XXU1BOH7_T810XAR1BOH7_HOME.tar, Now i have flash custom rom so my tab si working but cant flash to stock rom.
Sorry my bad english :/
lakingslayer said:
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you its work
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
One more with problems when having CM. Try flashing TW ROM and then run Odin with stock firmware. BTW why ur odin is not checking MD5? What file did you download?
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
hidden.img
recovery.img
sboot.bin
system.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select repartition when flashing stock rom.
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
zombiemagnet said:
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Click to expand...
Click to collapse
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Scurzmann said:
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Click to expand...
Click to collapse
thank you, I found the right stock firmware for my device
hi, im having the same problem. Where did you get your stock firmware?
theymbunman said:
hi, im having the same problem. Where did you get your stock firmware?
Click to expand...
Click to collapse
do you have the same model as mine?
I found mine at
https://galaxynote5root.com/note-5-stock-firmwares/
hope it helps
zombiemagnet said:
do you have the same model as mine?
Click to expand...
Click to collapse
I'm using N920C. We have exact problem in flashing stock rom using Odin.
theymbunman said:
I'm using N920C. We have exact problem in flashing stock rom using Odin.
Click to expand...
Click to collapse
ahhh, then you need
https://www.theandroidsoul.com/samsung-galaxy-note-5-firmware/
it has all the stock model firmware you can easily find one here
Use smart switch,I had the same problems but after connecting to smart switch it went smoothly