Beware when trying the new firmware from Taiwan if you were already on one based on the latest NZ one.
tries several times and ODIN failed just after trying to flash hidden.img
Tried several times, no luck.
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I reflashed the NZ firmware afterwards and could recover. But this is a real pain... (Obviously had to re-root, reinstall TWRP, etc...) I supposed we wont have this issue through custom ROMs
Do you have reactivation lock enabled? Seems to have been the issue for others
absinthesummer said:
Do you have reactivation lock enabled? Seems to have been the issue for others
Click to expand...
Click to collapse
Thanks. It's not enabled actually.
Sent from my SM-N910U using XDA Free mobile app
Alcibiade said:
Thanks. It's not enabled actually.
Sent from my SM-N910U using XDA Free mobile app
Click to expand...
Click to collapse
OK I think that's my fault for skimming over a bit. I thought you were asking a question not making a statement
absinthesummer said:
OK I think that's my fault for skimming over a bit. I thought you were asking a question not making a statement
Click to expand...
Click to collapse
Indeed was just warning people looking to upgrade to be careful if they don't want to waste their time
Thanks anyway!
Sent from my SM-N910U using XDA Free mobile app
This happens with the note 4 usb cable sometimes i changed to a s3 cable and it doesnt stop anymore ive done lots of odin flashing including the latest Taiwan fw
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/ i can confirm that this solution works!
Related
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Hi!
When i got the same result, the solution was simple: put my phone to download mode
remal said:
Hi!
When i got the same result, the solution was simple: put my phone to download mode
Click to expand...
Click to collapse
probably a very stupid question but "Download mode" means to enable the "USB Debuging" or am i totally off?
No, it is by turning your phone off, holding volume down, home and power on until you see a yellow triangle. That is download mode.
Don't try it if you have no idea what you are doing. Also, your download mode may not work which might mean it needs to be fixed.
Sent from my GT-I9000 using XDA App
I think it is better to read first (HOW TO section): http://forum.xda-developers.com/showthread.php?t=723596
That is the point: "Several batches of phones that were sold have the download-mode button combo disabled (VolumeDown+Home+Power or alternatively Home+Power on some phones). Check if the download-mode combo works BEFORE flashing!"
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
i guess your three button download mode works..what you can do at this point is to download a stock rom...if the rom is only a tar file, place it on the PDA with repartition unchecked and no pit file...after flashing the stock rom, flash the CF Root with unchecked repartition and no pit...place the CF Root tar file on the PDA...that's it...place darky's in your sdcard and flash via CWM
Also make sure no part of Samsung Kies is running (use ctrl alt del and check for it running in the background) as I tried odin after using Kies and had this problem until checking this and rebooting
Sent from my GT-I9000 using XDA App
Thnx for all the responses.
@ jaju123
So that's called download mode, did not know that, ive been there before just did not know that it was called DL Mode
never mind, thnk you, i have now FW 2.2.1...
now the next step is the CF Root and after that i will become darky
always think before you act, is a good thought to take with you from this piont in your quest for the darky !
That is to late.. ive already become darky.though i miss my danish t9 dictionary with samsung/gingerbread keyboard.. The once in the market are not the best.. Is it possible to take out a t9 dictionary from a standard samsung FW and put it in the darky i use now
Sent from my GT-I9000 using XDA App
Same issues
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
hafees89 said:
Hi there,
I'm look the solution for this everywhere. I got no idea which one I'm wrong.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have been try around a week. I'm using KH3_modem_s2_+_ODIN\modem.bin. Izzit correct? Plz do help me
Click to expand...
Click to collapse
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
speedin said:
Hi
I have now for couple of hours tried to find a solution.. did not suceed. So i hope someone has time to help a bit.
Firstly i've tried to "CF-Root" my galaxy S, but i got the message below.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I thought maybe it is because of my firmware, so i tried to change the firmware with odin, but got the same message..
I have found people with the same problem, but no answers, so i'm begging for help cause i want to go "darky"
Any known solution to the above?
thanx.
Click to expand...
Click to collapse
Just shutdown your laptop or computer
Triskite said:
had the same issue... in case you are still curious, I got it working by unplugging and replugging the usb cable (with odin running)
Click to expand...
Click to collapse
this worked for me
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Arceist Justin said:
NONE of these "solutions" worked for me. NOT even unplugging and plugging it back in
Can someone provide a *working* solution?
Click to expand...
Click to collapse
you should use old version of odin
you use new version of odin?
new version doesnt support
Tuesday, August 18, 2015
I just upgrade my Samsung Galaxy Tab 3V from 4.4.4 Kitkat to 5.0.2 (S6 ROM)
And it says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well, how can I do this???
Hello,
I purchased a Galaxy S5 SM G900A (AT&T) whose previous owner supposedly only wanted to upgrade it to Android 5.0 and then stopped working. According to him, the phone was working properly before trying to upgrade it.
I have tried almost I have found and searched here and other sites, but it seems that anything is working. I think the phone is dead.
As a last resource, I have ordered a JIG, and should have it early next week. Do you think this can help?
Please see attached images for your reference, and would appreciate if someone can help me to confirm if this can be solved or not.
Odin Log (With Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Odin Log (Without Repartition Enable)
Code:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you in advance.
Anyone?
Yep
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Shadowdemized said:
There's a type of .tar do you need to flash on Odin.. I did the same damn thing that you did ..you could talk to the Samsung and see if they'll replace it since it is a hardware feature .. I'll see if I can find something to help you out ..because I've been looking at this place for like 2 weeks now
Click to expand...
Click to collapse
Any help you can provide will be greatly appreciated.
Best regards.
Yep
http://forum.xda-developers.com/att-galaxy-s5/help/tried-downgrading-5-0-to-4-4-2-bricked-t3093826
Do you mean the stock partition thing?
Because I already try to flash that file but still getting the same error.
Yep
On no bull**** lie ur ass off to samsung .. sorry, but thts all i know for now ... or if u got some dough buy a tmobile s5 off ebay and sim unlock it. that's what I heard people been doing these days
Tried to update my Galaxy S6 Edge, Android 5.1.1, Baseband G925AUCU3BOI2, but i'm getting this error using Odin with G925AUCU1AOCE.
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I have tried different cables, different com ports and still the same problem. I was able to revert to stock rom and worked flawless with Odin, but when trying to update with the marshmallow rom it's giving me this error.
Appreciate the help. :fingers-crossed:
flash oj9 , why are u flashing oce?
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Hi, i did flash it to OJ9 now, but i'm unable to sideload marshmallow on it.
what is the problem exactly, like why are u unable to sideload?
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
I can't sideload the zip file, most of the time it states that it couldn't read the zip file, while another time it was stating to load but got the "signature verification failed" and it erases my zip file to 1kb. I've used Android Studio and Minimal ADB and in both cases have the same results.
place the zip file in the C and try again
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
kapooo3 said:
place the zip file in the C and try again
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Click to expand...
Click to collapse
Still getting the signature verification error... Damn! Really frustrating, i'm using a Windows 10 64bit edition... don't know if that might be causing the error... Need help... We don't know when the Odin files for Marshmallow might show up..
i have the same as u , what i did was move the file to c/ computer thats all , the adb got it and it worked
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!
DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?
Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!
I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset
Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!
Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!
Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.
Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?
stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.
Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.
There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016
HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
zombiemagnet said:
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Click to expand...
Click to collapse
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Scurzmann said:
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Click to expand...
Click to collapse
thank you, I found the right stock firmware for my device
hi, im having the same problem. Where did you get your stock firmware?
theymbunman said:
hi, im having the same problem. Where did you get your stock firmware?
Click to expand...
Click to collapse
do you have the same model as mine?
I found mine at
https://galaxynote5root.com/note-5-stock-firmwares/
hope it helps
zombiemagnet said:
do you have the same model as mine?
Click to expand...
Click to collapse
I'm using N920C. We have exact problem in flashing stock rom using Odin.
theymbunman said:
I'm using N920C. We have exact problem in flashing stock rom using Odin.
Click to expand...
Click to collapse
ahhh, then you need
https://www.theandroidsoul.com/samsung-galaxy-note-5-firmware/
it has all the stock model firmware you can easily find one here
Use smart switch,I had the same problems but after connecting to smart switch it went smoothly