Related
Q&A for CM-12.0 (LP) UNOFFICIAL nightly builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM-12.0 (LP) UNOFFICIAL nightly builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is this a unified build for all carriers?
network issues with xt1093 uscc
great rom! everything seems to work smoothly. the only issue i have had is trying to connect to my network. Do i need to configure the APN to my carrier or is there something i am missing? i installed correctly using TWRP, factory reset, flash zip, cleared dalvik, reboot,....
I'm assuming we'll lose the moto things like active display and the phone talking when at home and on the road?
network issues with xt1093 uscc
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.
NOOBSABOT said:
Well i flashed back to stock and had the same network issues with my stock rom. i found a number to re-register on the uscc network. it took like 15 seconds on an automated line and everything was setup, could make calls out, receive calls, texts, data,...etc.
I tried to reflash the newest nightly (01/16/2015) and setup the network using the same number from before. Had to change the network config file and modify the APN to my network. the config was LTE/CDMA/GSM auto (PRL) (prior to that it was set to LTE/GSM auto (PRL)) that put me into roaming long enough to dial the setup number. the setup went fine but after it finished......Nothing. i couldnt even force roaming in the network config.
I am thinking this is a modem firmware issue. I dont have an logcat files (working on that now). i tried to flash the stock modem firmware after flashing the nightly but didn't help
Still an awesome rom and would love to get networking running for this device.
Click to expand...
Click to collapse
I think that the radio is broken on the last couple of nightlies across many different devices. Try an older version and see if you have better luck.
i'm on stock 5.0 rooted xt1092
doing nandroid and flashing last build this evening.
flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?
michyall said:
flashed and no problems found, but have no more root permissions, do i have to re-root using chainfire?
Click to expand...
Click to collapse
Did you enable it in developers options?
matt99017d said:
Did you enable it in developers options?
Click to expand...
Click to collapse
Yes sir. I've solved fastbooting again CF. Maybe after format you loose root permissions.
No Network
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.
CrepuscularSoul said:
I've flashed several of the nightlies (both early and most recent) and none of them have a network connection. I've tried factory resets, cache wipe, the usual and no luck. Is there a specific baseband version I need to be on or any APN tweaks I need to do?
[edit] I have the tmo pure edition fwiw.
Click to expand...
Click to collapse
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
---------- Post added at 01:31 PM ---------- Previous post was at 12:38 PM ----------
CrepuscularSoul said:
I'm pretty sure that's what I'm on. System is 22.21.11.victara_tmo.en.US, build LXE2246-11, and Baseband MSM8974_4125.184.08.27.01R
If that's not the latest let me know and I'll grab the updated ones and flash those through fastboot and try again. If they are is there anything I could grab with the syslog app or adb that might help in figuring it out?
Click to expand...
Click to collapse
Got it. The APN protocol for fast tmobile com in my stock rom was IPV6, and when I flashed this it was IPV4. Changing that got my data connection working.
crpalmer said:
I don't do anything special on tmo pure edition. I installed the official LP update so I am on the latest baseband (which I recommend using).
Click to expand...
Click to collapse
I have the T-Mobile pure and left the base as 4.4.4 and flashed cm12. Signal is awesome as are the transfer rates.
I've tried liquid and slim with the same results.
How will the battery? Better or worse than stock?
Works in XT1097, right?
I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?
loic5032 said:
I did a clean flash on my xt1092. On reboot I get a screen that says encryption failed, with a button to do factory reset. Doing factory reset just brings me back to this same screen. I don't even think that my storage is encrypted on stock. Any help?
Click to expand...
Click to collapse
you have to go into TWRP, then WIPE then Format Data. then install rom and gapps.
you will format your memory loosing everything on your phone. i used to plug an usb otg with rom and gapps files.
double tap
Can we get some double tap to wake love? That was basically my favorite thing about my oneplus one and i put cm12 on that and works great
Let me know if thats going to happen or not because i cant live without that or the moto display
I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed
michyall said:
I think double tap to wake is not an interesting feature for a phone. Sure for a tablet but for your victara not. Waking up every two touches is not a good way. Ambient display is the best way for me, as good for looking for notifications as for unlocking.
I prefer power button indeed
Click to expand...
Click to collapse
Well i mean just having the option would be nice
its personal preference and my case makes it very difficult to press the power button
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
None as of now.
Downloads:
Current version
Custom rom with new build.prop by yahya1054:
Download
AGISCI said:
Due to the request of various members I have started a topic here for the rom for the xt1096 verizon model with android 6.0 marshmallow. This rom was developed by @hutchjim using the xt1097 marshmallow as a base.
Installation:
To install the rom, flash the zip from a custom recovery such as TWRP/CWM/etc.
Root:
To root this rom @donslade has stated that the files for the XT1095 work for it. They can be found here: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Known issues:
Some people are experiencing an issue where it says they are roaming.
Downloads:
Main download
Mirror 1
Click to expand...
Click to collapse
What the difference between this rom and 1095 MM Rom
kaktusmaier125 said:
What the difference between this rom and 1095 MM Rom
Click to expand...
Click to collapse
This one has support for verizon cdma. It is only useful for people who use verizon service.
Sent from my XT1095 using Tapatalk
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
donslade said:
AGISCI - Thanks for creating this thread. I hope we will have participation from folks who will test and provide feedback. I also hope that hutchjim will also provide info on how this ROM was created and what changes he made.
I believe the ROM is debloated from most of the Verizon apps and installs TWRP 2.8.7 as recovery. All of the Motorola Apps are there and function as expected from my experience. My phone connected to Verizon for voice and data. I do not know what other changes were made.
My experience to date has been mostly positive with just a few issues. I'll list those in a message a bit later. For now here is my interpretation of hutchjim's installation instructions:
1. Perform factory reset/wipe. THIS WILL WIPE YOUR PHONE AND ALL DATA ON IT. Either the built in reset/wipe of using TWRP. I used TWRP 3
2. Flash ROM
3. Perform another reset/wipe. I used TWRP 3
4. Phone will boot to initial setup. Follow prompts. Hutchjim says not to setup wifi during this phase but I see no way to avoid that. I connected to my home wifi at this point and continued setup.
5. As soon as you can go into Settings go to Cellular Networks > CDMA and select RUIM. No other changes should be made in the Cellular settings. You can also go to Backup & Reset > Reset Network Settings and reset there. Verify that the CDMA > RUIM setting is still selected.
6. Reboot and verify network settings.
7. Continue setup/restore from previous backup from Google. Any apps that need updating for MM will do so during the restore.
Doing the above results in a phone running 6.0.1 which identifies itself as a XT1097. I'll post a screen shot of the ABOUT phone screens later.
To root I used the files from here:http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Flash using TWRP
1. root-boot-6.0-xt1095.zip
2. UPDATE-SuperSU-2.65.zip (there might be a newer one out there but this one worked for me. It should update later if needed)
After this I was able to install the latest Exposed framework and app, Gravity MM, XGELS and AOSPSignal icons modules with no problems.
I had been using this ROM with no real issues since last Friday. Legacystar reported that his phone was Roaming after he installed the ROM. Mine was not Roaming worked great - until this morning when it went into Roaming a couple of hours ago. Nothing I did could make it change back. I restored a backup of this ROM from Saturday but the phone is still Roaming. I've now gone back to my last 5.0 backup and will try to reinstall the ROM later when am back home. Will update then.
Here is a list of items I think we need more info on:
1. What was the base ROM for this? I think it is XT1097 based but it may be XT1095 since the XT1095 root files work.
2. What changes were made to get this to work wit the XT1096 radio and allow CDMA operation?
3. How do the Cellular settings work and how can they be improved for this ROM?
4. How to bypass the network setup screen during initial MM setup?
Hope this helps. I'll update more after work and when I reinstall the ROM. Until then I hope more testers chime in with their experiences.
Don Slade
Click to expand...
Click to collapse
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Thanks for the update. I had notice that it did say retla in the system version. Need to pay attention to the baseband info.. Based on that I don't need to upload the About Phone screens then.
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
RamAir02 said:
Very excited for this. Do gapps need to be flashed as well?
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
It's a stock rom, gapps are in it already.
Sent from my XT1095 using Tapatalk
AGISCI said:
1) It is based on xt1097, specifically on retla which is the retail latin america variant. I am not surprised that the root files for xt1095 work since the xt1097 and xt1095 are extremely similar.
2) He sent me a list of some of the changes, I will dig through the files modified to get more details on what changed.
I was sent a new version by @hutchjim, it is uploading to google drive now. Hopefully in the new version the roaming problem is fixed.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
has this new version been uploaded yet?
Legacystar said:
has this new version been uploaded yet?
Click to expand...
Click to collapse
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
AGISCI said:
It's uploading right now, for some reason my connection is super slow today. I will post as soon as it's done uploading.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
awesome, thank you. any idea what he did to fix the roaming issue?
Legacystar said:
awesome, thank you. any idea what he did to fix the roaming issue?
Click to expand...
Click to collapse
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
AGISCI said:
He said he added a verizon app in priv-apps.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
might have been the verizon apn app
Alright, sorry for the long delay. My internet is messed up right now. I started the upload last night and left it running. I woke up to a failed upload message. I started it again and it took 5 hours to upload... anyway, I have updated the first post with the link to the new version. Please try it out and let us know if you have issues with roaming still.
I have had the roaming issue since I installed the original MM posted a few days ago but even though the R is showing by 4g it still allows me to access data through 4g. Hope I am not going to incur the financial wrath of big red. lol. I was reading this forum using it. Anyway, I want to say thanks for those putting in the work to try and figure this out and support a stock MM rom for the xt1096. I will test the new version as soon as I get it downloaded and report back if the roaming issue persists for me.
I have updated to the latest version of stock MM offered on first post and can confirm that the R roaming symbol is gone. I have rebooted several times and finished setting my phone up how I want it. The only issue I had during the process of installing and setting up this version of MM is that upon rebooting the first 2 times I had a pop up saying "Unfortunately, Verizon Login has stopped."
I rebooted into twrp and installed reinstalled the root and su zips and upon reboot the pop up went away. I guess I was wrong to assume that the order for installing the zips were 1)root boot for 1095, 2)Super SU and 3) MM Rom. After reading that in order it makes more sense to load the Rom then the root and su zips. Oh well, all is well that ends well.
Has anyone figured out how to bypass the wifi setup screen during setup?
Wrong forum.
i just loaded the new version and still getting the roaming. also having the verizon app crash on startup.
To skip WiFi setup, put sim card in on welcome screen so after boot put sim,
also roaming is gone for me but I just get data, no voice on some reboots voice aval even when it says out of service same last build.
Roaming was an issue older build new build fixed, voice still wonky for me
Hi
I have installed many of the Android 7.0 ROMS for Shamu and all of them have this annoying problem:
When I dial out I cannot hear the ring or the other person.
When I receive a call I don't often hear the other person but they may hear me.
Yes I've installed the N6 boot loader and radio and do not load any other mods, custom kernels.
I just can't figure this out. Any ideas? Is there a Android 7.0 firmware that I need to install to prepare my Shamu for Android 7?
Thanks
Aussie
I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it
Flashing Stock 7.0
aroy97 said:
I had this same problem, I had to re flash stock 7.0 and the problem was gone. No idea what caused it
Click to expand...
Click to collapse
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie
aussie1234 said:
Did flashing stock 7.0 re-lock bootloader? Were you able to unlock the phone?
Thanks
Aussie
Click to expand...
Click to collapse
Flashing stock does not relock the bootloader.
Didn't work
Ok I flashed stock 7.0 using Wugfresh's tool.
But still when I use the phone I can't hear who is on the other end.
Really odd!
Anyone have any suggestions?
Thanks
Aussie
I'm having the same issue on a stock Nougat phone as well. The problem appeared a few days ago out of the blue. The only band aid fix I've found is the sound about app and force assigned the mic and earpiece functions.
Sadly, this doesn't address the main issue in the first place.
none
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
USMC retired said:
Why are you using Wugfresh? Plug the phone in the computer and when it communicates with the phone tap the menu bar that says it's charging, when you open that tick allow files/folders, the second option. Then put your files on the root of internal storage, wipe the entire system then flash your rom, you don't need Wugfresh.
If you lose your data who cares, just set the phone up again and you should be good to go, this is much more dependable as I use to use Wugfresh, you do know how to get into recovery and install that way? You will want to do a full wipe, then flash
Click to expand...
Click to collapse
If you need anything else you can PM me
I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.
stevew84 said:
I didn't realize there was a thread on this already.
I'm using Pure Nexus and the other end would go silent for about 5 seconds and then come back...so that's a bit different than what you guys are experiencing.
Click to expand...
Click to collapse
have you tried reflashing your radio? Maybe try flashing a MM radio as well
Just wanted to chime in, I think this is actually more of a VoLTE/HD issue. It happens to my N6 that's still on MM. Sometimes the dialtone/ring is there, other times it's not. Would love to know of there's a fix!
Found a fix..
Hello all.
I found a fix to Shamu+Nougat ROM problem when I am called I do not hear the other person and vice versa.
To install Factory Nougat from Google: https://developers.google.com/android/nexus/images
FIRST backup your phone (contacts, files, pics, movies etc) as this will totally erase EVERYTHING!
When you are on the Factory Images for Nexus Devices page click "backed up to your Google Account" then go click 'back' on your browser and click on 'Acknowledge' to see the list of Factory Nougat ROMS for Shamu come up on the right.
Download the Android 7.0 Factory ROM for Shamu/Nexus 6.
Do not flash this stock ROM using Wugfresh's tool. Instead follow precisely the 'Flashing Instructions' on the page https://developers.google.com/android/nexus/images. Allow the phone to reboot and fully set up. Restart the phone again.
Then use Wugfresh to Root the phone and also to install custom recovery (I already have unlocked bootloader).
Now, nothing against Wugfresh Tool (I do not know why the flashing method above works better) as Wugfresh has saved my phone many times.. Its just that Googles recommended flashing instructions worked best.
Now I use the phone and not only do I hear the caller and they hear me I have much better reception (Australia). Yes I did previously flash latest radio but the above method seemed to improve my Shamu 100%.
What I have not done yet is flash a custom ROM in case the problem re-appears. But my phone is rooted and unlocked so I can install other mods that work with Nougat.
Hope this works for you.
Cheers
Aussie
Another Fix Part 2
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie
aussie1234 said:
Hi
I stumbled on another method that has seemed to work:
Ensure you have unlocked bootloader.
Flash Tupacs Android 6.0 MOB31H ROM from http://forum.xda-developers.com/nexus-6/development/rom-rooted-deoxeded-fast-stable-t3252922
(*Note I used his MOB31E Android 6.0 ROM so I am presuming current MOB31H will work).
Credit to this ROM goes to tupac4u as I am not a Developer.
I then flashed SuperUser but did not flash a custom kernel.
Setup the ROM as usual.
Selected Settings - About Phone - System updates and let the phone install the Android 7 OTA update. Be aware its a 878Mb download.
Let the update download and fully install. I had TWRP recovery and the update still installed fine.
After installation fully completed I enabled Developer Options and USB Debugging.
Then using WugFresh's excellent tool http://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 I applied Root and Custom Recovery.
I also flashed Radio 5.39R which I found works best.
Now my phone works very well and (for now) now I can hear the caller and they can hear me.
Cheers
Aussie
Click to expand...
Click to collapse
Has there been a listed fix for people who haven't rooted their nexus?
Every Pie Rom I've installed with the February Update, kills my WIFI. It comes and goes, it's not stable. Check it guys, CHECK IT.
JJ5150 said:
Every Pie Rom I've installed with the February Update, kills my WIFI. It comes and goes, it's not stable. Check it guys, CHECK IT.
Click to expand...
Click to collapse
Strange, i'm running Ressurection Remix with no problems at all. Maybe you should check/reflash your radio?
Wisse said:
Strange, i'm running Ressurection Remix with no problems at all. Maybe you should check/reflash your radio?
Click to expand...
Click to collapse
Resurrection Remix is still UNOFFICIAL. Last version is 02/09. February OFFICIAL Security Update was Updated February 16-19, and all the PIE ROMS that are OFFICIALLY Updated with this update KILL THE WIFI.
Thanks tho.
I am using pixel experience and there isn't any problem I encountered
SAPTADIP MALAKAR said:
I am using pixel experience and there isn't any problem I encountered
Click to expand...
Click to collapse
May I ask what model number you have?
I'm running AEX 6.3 and my wifi is perfectly fine.
JJ5150 said:
May I ask what model number you have?
Click to expand...
Click to collapse
Hey , I am using Moto G5s plus and the model number is XT1804.
SAPTADIP MALAKAR said:
Hey , I am using Moto G5s plus and the model number is XT1804.
Click to expand...
Click to collapse
I'm on XT1806
I was presented with a workaround... Disable WIFI scanning in settings. Fixes Wifi drops. NO DICE. Totally unstable wifi.
No problem with me too.. using pixel experience on xt1804
I'm using havoc os in my XT1806 and everything is working great, also most people don't have your problem, you should restore your stock ROM backup and try to clean flash any pie ROM, this is not the devs fault.
Juancasa14 said:
I'm using havoc os in my XT1806 and everything is working great, also most people don't have your problem, you should restore your stock ROM backup and try to clean flash any pie ROM, this is not the devs fault.
Click to expand...
Click to collapse
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
prophetgamer said:
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
Click to expand...
Click to collapse
Hi ! Don't be afraid, if you follow every step correctly you shouldn't have any problems, if you already unlocked your bootloader you should flash the latest version of TWRP if you want to root your phone, you can't use gcam unless you do it because you need to enable cam2api by adding a specific line to the build.prop.
If you decide to root it, just flash the treble version of TWRP and then flash the latest version of magisk, then you'll be able to modify your build.prop !
Ask me if you need any help
Juancasa14 said:
Hi ! Don't be afraid, if you follow every step correctly you shouldn't have any problems, if you already unlocked your bootloader you should flash the latest version of TWRP if you want to root your phone, you can't use gcam unless you do it because you need to enable cam2api by adding a specific line to the build.prop.
If you decide to root it, just flash the treble version of TWRP and then flash the latest version of magisk, then you'll be able to modify your build.prop !
Ask me if you need any help
Click to expand...
Click to collapse
hello again, I tried to make a backup of the system image but it always says backup failed, I already made the wipe data to decrypt, but it did not work
prophetgamer said:
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
Click to expand...
Click to collapse
prophetgamer said:
hello again, I tried to make a backup of the system image but it always says backup failed, I already made the wipe data to decrypt, but it did not work
Click to expand...
Click to collapse
You don't need to backup the system image, just backup system, data and boot, and also persist and efs just in case you lose your IMEI. Are you using treble TRWP?
I got the T-mobile REVVLRY+ today, and naturally, I wanted to put the stock motorolla firmware on it. Partly to see if I could, partly to get rid of the T-Mobile bloat and see what Motorola features T-Mobile had removed.
Everything went swimmingly, I have PPW29.98-107 installed, I even have WIFI Calling. What I did lose, however, is VoLTE. I did use TWRP to perform a backup before flashing, so I tried restoring it to get a better look at how VoLTE works in the T-Mobile firmware. This is where things got hairy. I stupidly only backed up boot, system, and data. When I use TWRP to restore them, I get stuck in a boot loop. The built in boot loop fix in TWRP didn't help.
1. Any ideas on getting as close to stock as I can with only the boot, system, and data partitions?
2. Does anyone have access to a REVVLRY+ that would be willing to do a full backup that I may try to restore?
*Edit* SO I used the code *#*#4636#*#* and VoLTE provisioned is enabled, so maybe I do have VoLTE?
*Edit 2* Google Pay doesn't work, even after locking the bootloader. The device says that the operating system has been modified. Still trying to get it to restore.
FOUND IT!
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
BanterJSmoke said:
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
Click to expand...
Click to collapse
Where did you find it at? I would like to know because I'm trying to port Lineage OS to this phone. However, once I unlock the bootloader, I won't have an OS to use for it and i'll be screwed.
serris-chan said:
Where did you find it at? I would like to know because I'm trying to port Lineage OS to this phone. However, once I unlock the bootloader, I won't have an OS to use for it and i'll be screwed.
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/lake/official/TMO/
HOW to
Hi, I just picked up the Revvlry+. Do you have step by step to install the Stock Moto firmware? I miss some of the features of the Moto. Also, was it easy to restore the TMO firmware just in case?
did you make any progress into the volte research? im on a unlocked xt1965-2 and using metro but i dont get volte in any of the stock roms or custom roms. i have tried flashing the modem from the stock tmo rom which didnt really do anything. i will probably try to flash the entire tmo rom tonight and see if it boots. im thinking if i get volte in the tmo rom and backup the persist, vendor and efs. then if i restore them onto a working cutom rom with volte enabled, volte should work.
i have also read about different scenarios in where you have to install workarounds to enable volte on treble roms. like installing the ims.apk to route the calls to volte and flashing a volte enabler to inject the correct files into the vendor partition.
my other device is a moto g5 plus which has numerous volte issues when switching between stock and custom roms or between different versions of android.
Did you use the Moto G7 Plus TWRP? I just picked up a Revvlry+ and I'm looking to root to install lawnchair or pixel launcher as a system app.
successfully unlocked the bootloader of my t-mobile revvlry which is a rebranded moto g7 i did it using this method but i'm going to be a little cautious on rooting unless i know it's safe and won't brick i could use some help with this https://www.androidinfotech.com/root-moto-g7-plus-pie/ i have the revvlry not the plus i want to try multirom installer and install ubuntu touch on it but i don't want to screw up my only phone but the only way i can try it is if i had root permissions to do so to install linux tried userland but i couldn't get unity desktop to work i'd rather have full root instead of fakeroot update: i was able to boot twrp before but now it doesn't work i think my firmware updated cause now when i run fastboot boot twrp.img nothing happens and i end up with remote failed reboot the phone and it goes directly to recovery with the only option is to do a factory reset
ghostdogg49504 said:
successfully unlocked the bootloader of my t-mobile revvlry which is a rebranded moto g7 i did it using this method but i'm going to be a little cautious on rooting unless i know it's safe and won't brick i could use some help with this https://www.androidinfotech.com/root-moto-g7-plus-pie/ i have the revvlry not the plus i want to try multirom installer and install ubuntu touch on it but i don't want to screw up my only phone but the only way i can try it is if i had root permissions to do so to install linux tried userland but i couldn't get unity desktop to work i'd rather have full root instead of fakeroot update: i was able to boot twrp before but now it doesn't work i think my firmware updated cause now when i run fastboot boot twrp.img nothing happens and i end up with remote failed reboot the phone and it goes directly to recovery with the only option is to do a factory reset
Click to expand...
Click to collapse
Are you saying with a Tmobile Revvlry, you were able to just go to the Motorola bootloader unlock page, paste your unlock codes, and presto as if it was just a normal Moto phone? If so, that is awesome!
I am thinking of swapping my Moto G7 Play with a Revvlry because of the 3gb RAM and NFC (the size of the G7 Play is perfect, I don't want to be forced to carry around a giant phone), but would love to flash the stock Moto G7 Play ROM over the Tmobile version. Not sure I'm willing to risk it, but if anyone has tried, I'd love to hear about it.
Logged into my account for this. Sorry if this is a little offtopic, but I want to see if this phone is compatible(or rather, how compatible it is) not only with Stock ROMs, but also with custom ROMs. For those REVVLRY owners, what have been your experience with this?
ultracoolguy said:
Logged into my account for this. Sorry if this is a little offtopic, but I want to see if this phone is compatible(or rather, how compatible it is) not only with Stock ROMs, but also with custom ROMs. For those REVVLRY owners, what have been your experience with this?
Click to expand...
Click to collapse
Phone works great with stock ROMs. I haven't tested out any custom ROMs, but I do have root on my REVVLRY.
tri_cchan said:
Phone works great with stock ROMs. I haven't tested out any custom ROMs, but I do have root on my REVVLRY.
Click to expand...
Click to collapse
nice man
Relocking Bootloader
Would I do the OEM lockbootloader command to lock it back
Can confirm flashing Moto g7 play firmware on T-Mobile revvlry. Caveat, you can no longer take OTA's and NFC is broken. Also can be bootloader unlocked through the Moto website.
Wouldn't you need to flash the G7 plus firmware for NFC to work?
guitardoc64 said:
Wouldn't you need to flash the G7 plus firmware for NFC to work?
Click to expand...
Click to collapse
That makes sense, the SD632 is NFC capable however I'm on the G7 play not the plus (I know, I know wrong forum)
I can't get the stock rom to work. It just bootloops every time. I tried all 3 versions. Any ideas?
Hey friends, would one of you kind sould who own the Revvlry+ be kind enough to post this Wallpaper?
Thanks in advance!
BanterJSmoke said:
I found a repo of firmware that has the TMO firmware! flashing now!
I can't share the external link yet.
Click to expand...
Click to collapse
Did you manage to restore it with firmware? Because I have a bootloop and I'm looking for a solution
quiet boy
I just solved the problem I had like 4 crazy hours with solve bootloop, the problem that I commanded automatic flash, not flashing the vendor partition and then flashed the manual vendor partition
mfastboot flash vendor vendor.img and ready
edit:
for users with Revvlry+ variant (XT1965-T) use this Flash.bat