Database Develop

[Q] Imprinted Markings on the Screen

Hi All,
When I bought the phone it was enveloped with a sticking transparent cover (as the ones you find on new phones, at least here) and the sticker on the screen has the samsung logo and Wifi/GPS and stuff like that written on it. The thing is, when open the market or scroll down the notification, I can see the residue of those words and markings imprinted, granted it is hard to spot but very annoying.
I have been trying to capture a photo with my camera but didn't succeed so far. Anyone had this problem before? or any ideas? is it a permanent damage to the screen or those are residues that can be removed?

Haven't noticed anything like that, but I suggest you try to clean your screen.
For cleaning I used a PC LCD screen cleaning solution, spraying it on a soft, clean paper towel and rubbing the screen lightly with it, taking care not to let any liquid in the phone speaker holes or the home button. Afterwards wipe the liquid with a clean, soft, dry paper towel. Makes my screen shiny and clean as new.
If cleaning doesn't work, I suggest you get it replaced.

Ok I've managed to finally take a picture that shows what I am talking about. The white note shows the exact covers that was on my phone.
Notice the HD Amoled and the circle around it? that's the one I can still see when the screen is showing colors same as the one in the picture. I can also see (but couldn't take picture of) the words GPS, the Wifi logo and a circle (android logo) in the bottom.
any ideas? is that permanent? is there a way to remove it? people don't notice it on my phone, but since I know it is there, it's becoming more and more annoying

I didn't have those stickers on my phone...
Sent from my superior GT-N7000 using Tapatalk

Hi
I'm having the same problem. Did you get this fixed?

[Q] What happened to my screen?

Hey guys,
I recently bought a Samsung Galaxy S i9000 and the Amoled screen has some serious issues with colours. It appears that the red part of the screen is messed up and cannot display any true white anymore. This happens in download mode, recovery, even in a custom ROM. It's definitely hardware. This video should explain it:
Yes, this phone is pretty much screwed, and the home key is no longer functional at all now. However, I've fixed the rotation sensor issue, and I've thought about repurposing it at a remote for my XBMC media center
Firstly, has anyone seen this issue with the screen before, and secondly, has anyone fixed it? It may be an internal connector which is loose. Suggestions would be good, otherwise I'll just have to put up with the annoying blue tint.
Cheers!

Anyone? Is this more likely to be the panel itself or a cable? Wondering if it's fixable or maybe the connector could be corroded...

Take it apart, remove the mainboard, and clean the board with Isoprophyl-alcohol. Its a 70% alcohol, here in germany you can buy it in a pharmacy. I use a paintbrush to get electronics clean safly.
And also clean the connectors that go from the phone to the board with the alcohol. I suspect there is some kind of water damage in your phone. Samsungs are realy *****y when it comes to water. Even sweat sometimes is enough to cause problems.
To take it apart you only need to remove the 7 screws under the back cover, pull of the back and the board is just held in place by the connectors.
Try youtube if you get stuck. There are some Galaxy S disassembly videos.

Screen with Stain, can't fix

My device started last week with a stain in the screen that I can´t fix, has anybody have this happened?
It´s a yellowish mark on the top left side of the phone, haven't droped it or smashed it, or anything other than regular use, does anybody know?
Attached is an image of the mark.

My Z3 did that - then the screen started peeling off! Repaired under warranty

Proximatly sensor is bugged.

Changed phone screen , so after that screen coes black when i call and cant do ****, i think sensor is kinda buggued. When i take screen off and move finger, 5cm far from sensor it works, but when i move my finger in 2 cm far from sensor it wont work. I have no clue , hard ware of software problem.

Find proximity windows on new touch screen and paint it with black marker from inside. If it doesn't help scrape all painting from this small window to make it completely transparent and then again paint it without leaving any spot transparent. Permanent marker You can clean with some alcohol, don't use any solvent cause it can damage rest of digitizer paint.
Some year ago I had whole part like this, 15 or more screens where I had to scrape this window from painting and again paint it with black marker because factory paint was to dark and light couldn't come in. But in Your case before You scrape it first paint it cause Your can be too bright and if it doesn't help then scrape and paint.

Antoonio said:
Changed phone screen , so after that screen coes black when i call and cant do ****, i think sensor is kinda buggued. When i take screen off and move finger, 5cm far from sensor it works, but when i move my finger in 2 cm far from sensor it wont work. I have no clue , hard ware of software problem.
Click to expand...
Click to collapse
Well the best thing to do, is first determine whether the problem is a Software or a Hardware problem.
1) Factory Reset the device, if the problem persists, flash the firmware of your device via Flashtool ( BACK UP YOUR DATA FIRST ).
If the problem with the sensor still exists...
It's most likely a hardware issue and the best course of action would be to send it to Sony and hope it is covered by warranty, either way it won't be expensive to replace compared to a broken digitizer or something.

Revontheus said:
Well the best thing to do, is first determine whether the problem is a Software or a Hardware problem.
1) Factory Reset the device, if the problem persists, flash the firmware of your device via Flashtool ( BACK UP YOUR DATA FIRST ).
If the problem with the sensor still exists...
It's most likely a hardware issue and the best course of action would be to send it to Sony and hope it is covered by warranty, either way it won't be expensive to replace compared to a broken digitizer or something.
Click to expand...
Click to collapse
He changed screen, this phone is no more under warranty.

Painted it black, scratched it off and it worked, thanks a lot

Sony xz2 compact black screen?

Hello... new here searching for a sollution regarding my problem.
I recently had my xz2 compact outside in some rainy weather and afterwards my phone went black, led works and sounds work. Upon rebooting i can barely see the Sony and Android logo, and about 1 second of my startu pscreen, but only barely if i angle a flashlight at the screen, nothing is visible in normal room light.
Ive tried replacing the screen without any success.
Any ideas? I probably can recover data but I would like to get it working again.
Br

I probably found the problem on my own. Posting it here incase other people have the same problem.
It turns out there is a fuse for the backlight function. I need to replace it, however the fuse seems to be impossible to find so someone else just soldered a zero resistor instead.Ill try thatand see how that works