For a while I've been using the nonsense rom (provided on this forum) and it's worked fine. Just the other day however I tried turning on my phone, it would get to the boot screen with the animation of the android bot peeing on the apple logo and it would just play that animation over and over until eventually the phone turns off. I figured I just had to restart, but it was the same issue. After trying to reinstall that same rom, I had the same problem. I then tried different roms and the same issue with those, they would get to their respective boot animations and play them until the phone turns off, never going past the boot screen. The one rom that sort of worked with the cayonogenmod 12.1 rom, but the issue with that is after the boot animation, it appears to be starting the set up for the phone, but prompts me to enter a password, which I have no idea what it is. Doing a bit more research, it seems that there may be a problem with twrp and it not formatting (term?) properly.
As of right now, I've done a factory reset on the phone several times to no avail. I just need help getting this phone to work. I've tried looking at a few places and using adb, but the device wasn't found and I didn't have time to look any further because I'm busy with a project I'm working on and with moving. Some places I've looked said to put the phone into usb debug mode, which I can't do since i can't get past any of the boot screens.
Edit / Solved:
I went into twrp and instead of choosing "wipe data" i went to "format data" and that seemed to fix the problem. Although I did have an issue with the nonsense rom, it got past the boot animation, but then gave an error "unfortunately the process com.android.systemui has stopped". I instead installed the raptor rom and it's working fine.
Related
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.
Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!
I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.
I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?
Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....
Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.
Hello all. I have been in the Android root community for a little over three years, and even after tinkering with the various devices I've owned since, I cannot get my T599N to come out of its current bootloop.
A background: I had been checking some things in my settings app (running stock, rooted), and I ended up just force closing the settings app to get out of it quickly. Well, this action deleted all of my text messages, and later on it removed my notification bar and made my wallpaper go black. I ended up booting into recovery mode to try and clear the cache. After it cleared, I rebooted, and bam, the bootloop started.
Now, here's what's interesting. The phone is in a bootloop where it displays the first boot message (SGHT599N Galaxy Exhibit or whatever), and then it tries to boot into cwm recovery, displays the loading screen for that for 2 seconds, and just reboots again. I've tried installing a stock rom from ODIN with no success. The rom apparently loads onto the device but it's still in the bootloop. After this, I tried to install philz recovery to try to install a zipped rom to get the device to somehow boot. I tried to factory reset it for installing purposes, and it just reboots. The device will literally clear everything but /data, so that makes me think that it may be a file system problem. I really need to get it to work, as I am out of a phone right now.
Does anyone have any suggestions? I've tried everything I know.
Hello,
Today, while I was using my phone, it restarted itself and has been stuck at a boot loop almost entirely since then. It has successfully booted up 2-3 times but will usually restart itself within 30-45 seconds of booting and then will be stuck in a boot loop again. When it has started up its usually after it has been bootlooping for a while. I'm rooted and using xTreme Rom v2.0. I have had occasional random reboots here and there before but the phone always booted right up again without any issues. I haven't done anything with root/recovery since early September.
I've tried doing a factory hard reset without any luck. My phone booted up after I tried the hard reset and it was like the reset didn't happen. I can't boot into TWRP. I can boot into download mode and I tried to reset using kdz. It got to 100% but the the phone restarts and is back in the boot loop (then the lg flash tool gets an error and force quits). I've tried removing my sd and sim cards, I've tried swapping to a different battery, I've tried leaving the battyer out and letting the phone cool down. Nothing is working. I have noticed that when the phone is going to boot up correctly the full LG animation plays. When the phone is going to boot loop I only get a static LG Powered by android image.
Any suggestions?
Since I tried to rest using kdz I can't get past the boot loop...Device also isn't recognized when using adb
edit: It booted up once this morning and went to the initial set up screen, like the kdz worked. But about 30 seconds-a minute later the phone locked up, rebooted and has been stuck in a boot loop since.
That's weird..
So the KDZ goes through all the way successfully.
Phone does the update all apps etc.. and it still boot loops after a while?
Which ROM version are you updating it back to?
My phone just did the exact same thing. I'm also on the Extreme Rom. Everything you described is my experience too. When I use the LG tool it goes all the way through and reboots the phone but just keeps bootlooping. Did you find a fix? I've tried everything i can think of. Probably going to take it in tomorrow and get warranty on it.
rectifiercc said:
My phone just did the exact same thing. I'm also on the Extreme Rom. Everything you described is my experience too. When I use the LG tool it goes all the way through and reboots the phone but just keeps bootlooping. Did you find a fix? I've tried everything i can think of. Probably going to take it in tomorrow and get warranty on it.
Click to expand...
Click to collapse
I used the following method:
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Download the correct KDZ file to flash back to and follow the rest of the instructions. You can also look at this video tutorial. https://www.youtube.com/watch?v=zXO2SHqBiNk
The one you'll want to try is "Normal Flash"
"CSE Flash" is a full wipe that deletes all data.
Mine was weird where it told me my phone disconnected, but the progress bar was still continuing. If that happens to you, don't hit cancel, let the progress bar finish to 100%
Hi everyone! I have been suffering with this problem for 2 full days on my S10 (SM-G973F/DS) and now i just have absolutely no idea how to fix it, so I thought it was worth writing about it here.
On stock, I used one old and outdated application that made user certificates system certificates, but which worked. Having tried it on EvolutionX 5.9.1 (Android 11), it brought the phone into a bootloop. I didn’t have a backup and because in order not to go through the installation process on a new one again, I decided that I would try to delete the folders from the data partition ONLY, but after half a day of attempts, nothing happened and I started to install the rom from scratch, but then weird things began to happen: after reinstallation/factory reset, boot animation randomly started (check attached video), which either went into an endless boot, or loaded the system back, but then if boot animation started on loading then this loading become endless, and the buttons (in the system) "Reboot to recovery", "Reboot to bootloader" and etc simply turning off the phone without booting into the recovery or bootloader, and if this happened, then somewhere in 2 minutes after turning it off.
I think i tried almost everything: re-installation according to the instructions, re-installation according to the way I did it before, I even tried to install the stock, and after the recovery again and then rom, but absolutely nothing changes, I cannot use custom rom if it is up to this worked fine and everything started on the same version as I was trying to install like before, I even tried to download the rom installation file again, not installing magisk-patch in boot, installing multidisabler, even find my old backup for TWRP that has every partition, but absolutely nothing changes, maybe someone knows how to fix it?
Thanks in advance!
P.S Stock rom works perfectly (android 11), but i want to use custom anyway (also android 11)