No LTE on 5.1.1 - S6 Active (Outside US) - Galaxy S6 Active

I am running 5.1.1. G890AUCU3BOJE in the Bahamas with BTC sim.
I cannot get LTE service, only 4G.
Network type set to LTE/GSM (PRL).
Tried my sim card on friends S6 Active running 5.0.2 and LTE works fine.
Any solutions?

Check the APN settings

rmc16 said:
Check the APN settings
Click to expand...
Click to collapse
Yes did that. All apn settings matched.
Seems the phone won't recognise the network as LTE only Hsupa

is0lde said:
I am running 5.1.1. G890AUCU3BOJE in the Bahamas with BTC sim.
I cannot get LTE service, only 4G.
Network type set to LTE/GSM (PRL).
Tried my sim card on friends S6 Active running 5.0.2 and LTE works fine.
Any solutions?
Click to expand...
Click to collapse
Have you tried go into the dialer and dial *#*#4636#*#*
From there click on device information and you try change it to LTE only or LTE/WCDMA? Or just slideload to android 6.0?

ted presley said:
Have you tried go into the dialer and dial *#*#4636#*#*
From there click on device information and you try change it to LTE only or LTE/WCDMA? Or just slideload to android 6.0?
Click to expand...
Click to collapse
Yes, tried those settings, and sideloaded to 6.0, with no change. still stuck on 4g.

is0lde said:
Yes, tried those settings, and sideloaded to 6.0, with no change. still stuck on 4g.
Click to expand...
Click to collapse
What speeds are you getting? Some devices may say 4G but are getting LTE speeds.

Tutsumi said:
What speeds are you getting? Some devices may say 4G but are getting LTE speeds.
Click to expand...
Click to collapse
Testmy.net results are 7 Mbps DL and 1.8 Mpbs UL
Speedtest gave 7.6 Mbps DL and 2.5 Mbps UL
I think I should be getting double that if I was on LTE..?

BTC's LTE band is B17, which could not supported by S6 Active.
https://www.frequencycheck.com/carriers/btc-bahamas

Related

[Q] is there any way to keep the phone from using LTE?

my phone is unlocked and i use tmobile service..
they just switched on LTE in my area.. and its working great.. i assigned a new APN (fast.t-mobile.com) and i get upwards of 18Mbps.. but..
in my house.. the LTE signal is 1 bar.. most of my calls go straight to VM and i sometimes dont get texts for hours..
in my house the 4g signal which was the default before is 3 to 4 bars.. i never had a problem receiving calls and texts when its on 4g.
so it seems now they have LTE service the phone favors that no matter what the signal is..
i cant find any options in the settings to turn off LTE and just use 4g.
i guess you can disregard this question.. i installed CM10.2 and it has the option to only use WCDMA instead of LTE..
this fixes my issue
aarons6 said:
i guess you can disregard this question.. i installed CM10.2 and it has the option to only use WCDMA instead of LTE..
this fixes my issue
Click to expand...
Click to collapse
On stock MR do :settings>more>mobile networks>network type
Mister_Simon said:
On stock MR do :settings>more>mobile networks>network type
Click to expand...
Click to collapse
no the original firmware did not have the option to select GSM/WCMA/LTE only.
the CM10.2 has 3 options.
WCDMA/LTE
GSM/WCDMA/LTE
GSM/WCDMA only.
along with a use 2g network only check box..
aarons6 said:
no the original firmware did not have the option to select GSM/WCMA/LTE only.
the CM10.2 has 3 options.
WCDMA/LTE
GSM/WCDMA/LTE
GSM/WCDMA only.
along with a use 2g network only check box..
Click to expand...
Click to collapse
"On stock MR"

T Mobile Setup/Down Speeds

So i took out the Sim from the Iphone 6 im returning and popped it into this bad boy. Curious as to how you guys are setting up the phone so you get the correct LTE speeds. Im barely getting 9down whereas my gf's galaxy in the same room is getting 20+ down. wonder if i did anything wrong
It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.
dew.man said:
It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.
Click to expand...
Click to collapse
Nah something is def wrong. Phone is barely usable without wifi. What APN settings are you guys using for tmo?
fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.
ikon8 said:
fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.
Click to expand...
Click to collapse
Thats what i been running. Could it have something to do with the sim? Was i supposed to get a sim for an unlocked phone? Urrgh so frustrating
That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.
ikon8 said:
That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.
Click to expand...
Click to collapse
shes got a galaxy s4 so that wont work. however i still got the iphone 6 around. when i put the sim in that phone i get regular LTE speeds.
Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.
ikon8 said:
Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.
Click to expand...
Click to collapse
These Are my options under preffered:
wcdma only, gsm only, wcdma (preffered)/gsm and 4g(preffered)/wcdma/gsm. i dont see lte in the list
per your test, when I switch to LTE only in phone options the I lose all bars and signal totally craps out.
So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.
ikon8 said:
So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.
Click to expand...
Click to collapse
negative. just all bars gone and a big red x. you have this phone on t mobile also? did you do the us firmware update?
Yea, I'm using tmo. My phone is running 23.0.A.2.105
I got 2.93 maybe which one is 105??
I was worried during my first day of owning the phone because my Z1c showed LTE above the bars and now this Z3c shows 4G. I was worried that 4G != LTE.

Sprint HTC One unlocked to GSM Data problems

Hello, I have gsm unlocked my sprint htc one and I'm now using Metro PCS network. Calls and Text work just fine but, when it comes to mobile data it runs super slow and I have no clue why. Any help appreciated.
AFloness said:
Hello, I have gsm unlocked my sprint htc one and I'm now using Metro PCS network. Calls and Text work just fine but, when it comes to mobile data it runs super slow and I have no clue why. Any help appreciated.
Click to expand...
Click to collapse
Check your APN settings in Settings > Mobile Data > Access Point Name to see if they match these: http://unlockandrepair.com/metropcs-internet-mms-settings-for-android/
The other thing is that the Sprint HTC is primarily a CDMA phone with GSM cabability and the GSM bands may not get you fast data. For instance Sprint LTE band is 1900 whereas T-Mobile's LTE bands are 700, 1700/2100.
:0
Yeah I'll give those APN settings a shot, I'm using T-Mobile's apn settings. Yeah I had read about the radio frequencies , when I first unlocked my phone to gsm no network providers other than Sprint would show up ... So I flashed a T-Mobile radio through twrp.
AFloness said:
Yeah I'll give those APN settings a shot, I'm using T-Mobile's apn settings. Yeah I had read about the radio frequencies , when I first unlocked my phone to gsm no network providers other than Sprint would show up ... So I flashed a T-Mobile radio through twrp.
Click to expand...
Click to collapse
The bands are hard wired into the phones, the Radio you flashed just enhances the bands capabilities but can not add bands.
Oh I did not know that. Imma try out the settings.
AFloness said:
Oh I did not know that. Imma try out the settings.
Click to expand...
Click to collapse
i am having the same issues but with a different provider. i installed a custom rom now it shows 3G and H but it moves no faster than GPRS/EDGE. anyone?

No LTE?

I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
radios
Gorjira said:
I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
Click to expand...
Click to collapse
Are you sure there is no LTE. I believe come of the notification icons are finicky. In other words, on mine someone it will show extremly low service bars but does not affect my phone? or data in any noticable way. Also are you in a bad service area?
What does the top right say? Have you received lte on previous devices being in the same location where you are now?
Sent from my Nexus 6 using Tapatalk
Gorjira said:
I apologize in advance if this has been addressed before. I'm running stock-rooted 5.0, stock kernel, and what I think(?) might be the radio for 5.0.1 I'm not sure... APN settings are correct and in the *#*#4636#*#* Phone Info menu I'm using LTE/GSM/CDMA Auto (PRL). Do I need to double check my radio or do something else? I'm on T-Mo with the TRULY Unlimited data plan. Any suggestions?
Click to expand...
Click to collapse
Radio for 5.0.1 ends with .04R. Do you ever show LTE in settings, see my screenshot. I've got Verizon obviously but with TMo you should get LTE too. If you have another phone stick the sim card in it and see if you get LTE in the other phone. If not could be the sim. Could be bad signal area too. FWIW TMo LTE is band 4 and soon to come band 12.
Wow. Thanks all for responses. @vvveith I am in an excellent service area LTE for miles! @zephiK Yes I used data over LTE on my Nexus 5 just fine. @jawmail Yes my radio ends with .04R. Sadly I do not have another phone nor SIM card adaptor to try your method with. Would the newer radio make my data signal fluctuate b/w 3G, H, and LTE? I understand that this is a different phone but I swapped radios on the Nexus4/5 all the time and it never hurt anything.
Gorjira said:
Wow. Thanks all for responses. @vvveith I am in an excellent service area LTE for miles! @zephiK Yes I used data over LTE on my Nexus 5 just fine. @jawmail Yes my radio ends with .04R. Sadly I do not have another phone nor SIM card adaptor to try your method with. Would the newer radio make my data signal fluctuate b/w 3G, H, and LTE? I understand that this is a different phone but I swapped radios on the Nexus4/5 all the time and it never hurt anything.
Click to expand...
Click to collapse
1) Did you get LTE on the 5.0 Radio?
2) Try setting it to LTE/GSM auto (PRL) instead
3) When you say APN is correct. Which one are you using / looking for? Ensure it is T-Mobile 4G LTE IPv6 (if its already on IPv6 try IPv4)
If worst comes to worst, go to the T-Mobile store and get a free SIM card replacement, if they don't want to give you a free SIM. Give them a call, it'll take a couple days to arrive but T-Mo employees are quite nice about giving SIM cards. Especially since you paid for a N6 which is expensive.
zephiK said:
1) Did you get LTE on the 5.0 Radio?
2) Try setting it to LTE/GSM auto (PRL) instead
3) When you say APN is correct. Which one are you using / looking for? Ensure it is T-Mobile 4G LTE IPv6 (if its already on IPv6 try IPv4)
If worst comes to worst, go to the T-Mobile store and get a free SIM card replacement, if they don't want to give you a free SIM. Give them a call, it'll take a couple days to arrive but T-Mo employees are quite nice about giving SIM cards. Especially since you paid for a N6 which is expensive.
Click to expand...
Click to collapse
1.)Yes i did and it was much more reliable.
2.)Overnight I switched b/w those two settings and kept getting the same result.
3.)I switched the APN to IPV4/6 and that seemed(?) to have solved it.
This has been going on for a couple days so I might see if I can get a new SIM.
Gorjira said:
1.)Yes i did and it was much more reliable.
2.)Overnight I switched b/w those two settings and kept getting the same result.
3.)I switched the APN to IPV4/6 and that seemed(?) to have solved it.
This has been going on for a couple days so I might see if I can get a new SIM.
Click to expand...
Click to collapse
I cannot find where set the APN don't see under More, Cellular. I can VZW where can I find the APN on N6?
parcou said:
I cannot find where set the APN don't see under More, Cellular. I can VZW where can I find the APN on N6?
Click to expand...
Click to collapse
You had it right, its under more > cellular > access point names (APN), then select your carrier.
hanano17 said:
You had it right, its under more > cellular > access point names (APN), then select your carrier.
Click to expand...
Click to collapse
For the rom I am on I don't see under cellular the option for APN. Do I have to be back to factory to see it.
Sent from mobile...excuse typos!
parcou said:
For the rom I am on I don't see under cellular the option for APN. Do I have to be back to factory to see it.
Sent from mobile...excuse typos!
Click to expand...
Click to collapse
With custom Roms its hard to say. Safest answer would be yes go to factory
Sent from my Nexus 6 using XDA Free mobile app

Lte issue on usa version

Hi guys!
Im having this issue. *#*#4636#*#* when i dial this code it let me access to select what type of network i want. So i want to force to use LTE Only, but the signal get lost, not signal anymore. But when i change it to lte/gsm its works again. I know i have lte in the area but i cant get it in that way. Can anyone ccan try that and reports back if let u chanche the network? Thanks.
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Hi guys!
Im having this issue. *#*#4636#*#* when i dial this code it let me access to select what type of network i want. So i want to force to use LTE Only, but the signal get lost, not signal anymore. But when i change it to lte/gsm its works again. I know i have lte in the area but i cant get it in that way. Can anyone ccan try that and reports back if let u chanche the network? Thanks.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
i change my networks all the time, without issue. if i put lte only, i get lte only. but cant make phone calls on it, so i use lte/gsm. if you dont have an lte signal, it will not connect to lte only.
simms22 said:
i change my networks all the time, without issue. if i put lte only, i get lte only. but cant make phone calls on it, so i use lte/gsm. if you dont have an lte signal, it will not connect to lte only.
Click to expand...
Click to collapse
Thanks.. But u get data working on lte only???
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Thanks.. But u get data working on lte only???
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
yup, no issues. tmobile here.
simms22 said:
yup, no issues. tmobile here.
Click to expand...
Click to collapse
Im on claro puerto rico. Ure version is 5.0.1?
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Im on claro puerto rico. Ure version is 5.0.1?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
no, im on 5.0.2, but that wont make any difference.
I have an issue where my Nexus 6 will boot with LTE, but once it looses from getting/making a call it cannot regain it.
TopHATTwaffle said:
I have an issue where my Nexus 6 will boot with LTE, but once it looses from getting/making a call it cannot regain it.
Click to expand...
Click to collapse
Which company ?
Sent from my Nexus 6 using XDA Free mobile app
Bestplayer55 said:
Which company ?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
T-Mobile. Let the device sit overnight and it got LTE back. So it seems either the LTE radio in this device is terrible compared to my Note 3, or it just won't attempt to get back onto LTE all that often. Or my Devices LTE radio is messed up.
TopHATTwaffle said:
T-Mobile. Let the device sit overnight and it got LTE back. So it seems either the LTE radio in this device is terrible compared to my Note 3, or it just won't attempt to get back onto LTE all that often. Or my Devices LTE radio is messed up.
Click to expand...
Click to collapse
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
aa_chow said:
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
Click to expand...
Click to collapse
if its not connecting to lte when you set it to lte only, then you either dont have lte around when you set it or its an extremely weak signal.
aa_chow said:
Telus Canada. XT1103.
Mine would stay on H+ after a call for a long time. I sometimes "force" it to connect to LTE by toggling cellular data and off in settings. Or a reboot.
Have tried the *#*#4636#*#* menu to change to "LTE only", but won't even connect to LTE in this case.
This feels like a software issue. Clearly it's not a network or hardware issue, since it can connect to LTE.
Click to expand...
Click to collapse
Unfortunately, it depends a lot on where you are. The office building that I am in is very bad for LTE, signal at my desk is -100dbm, if I go outside it switches up to around -60 to -70dbm. If I choose 3G as the preferred network, sitting in exactly the same location the signal goes to -75dbm 19 au. If I am at my apartment, the LTE signal is much stronger there. This of course effects the battery life also. I am not sure if there is a way to default which LTE band is used since I think Telus only uses band 4 for LTE but I am not familiar with how the phone determines which band to use or if it keeps scanning all of them.
simms22 said:
if its not connecting to lte when you set it to lte only, then you either dont have lte around when you set it or its an extremely weak signal.
Click to expand...
Click to collapse
No, where I was testing it, LTE was strong. I also had a Nexus 5 right beside it, and it had no problem acquiring a full signal.
With the Nexus 6, after a reboot or the data toggle, it acquired LTE, again almost full signal.
So I decided to just leave it alone and use it as normal without worrying about LTE or H+. I did not toggle data or reboot, just leave it as is. I just observe. After a few days, it seems better in that it will be connect to LTE a short while after a call, and behaves like how I expected it to like on the Nexus 5.
Of course, immediately after a call, it will stay on H+. If I really wanted LTE right then, I just toggle the data on/off from settings (not by setting to "LTE only" in *#*#4636#*#* menu).
aa_chow said:
So I decided to just leave it alone and use it as normal without worrying about LTE or H+. I did not toggle data or reboot, just leave it as is. I just observe. After a few days, it seems better in that it will be connect to LTE a short while after a call, and behaves like how I expected it to like on the Nexus 5.
Of course, immediately after a call, it will stay on H+. If I really wanted LTE right then, I just toggle the data on/off from settings (not by setting to "LTE only" in *#*#4636#*#* menu).
Click to expand...
Click to collapse
Ugghh lte data is hardly showing now went into dialer typed in code...it wont let lte only stick when i reboot is goes back to lte/gsm (auto)? Im on tmobile
Btw whats usa band? Thanks

Categories

Resources