hi,
unfortunately my research through the forums did not give me the answers to following question:
is there any list or overview about the baseband number show in the devices info and the referring carrier, e.g. i have two moto x's showing:
1.) xt1060 vzw 4.4.4 212.55.26.ghost_verizon.Verizon.en.US showing MSM8960PRO_BP_2323.038.123.00R
2.) xt1058 rogers 4.4.4 212.44.26.ghost_row.Retail.en.EU showing MSM8960PRO_BP_2323.031.111.00R (flashed the xt1052 FXZ over the original xt1058)
by now i could not manage to find any resource connecting these informations with the system version, modell or the like ...
I flashed
TMO_Retail_XT1053_5.1_LPA23.12-15.222.21.15.ghost_row.Retail.en.US
and XT1058_GHOST_RCICA_5.1_LPA23.12-15_cid14_CFC.xml
today, both get no signal and IMEI is "0"
It happened before when I was flashing RETAIL-XT1058_BR_5.1-222.21.7-BR and I fixed it by flashing (NON-HLOS, fsg, motoboot) from ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF.xml
When I tried to do the same thing today, I get the error
downgraded security version
update sbl3 failed
Do anyone know how to fix this?
I use ATT in US.
I am not sure about my phone model. I believe I picked US Celluar Factory Unlocked phone, but it writes Model: xt1053 at back
You should've only flashed what's for your model only. If it says xt1053 in the back of the phone, only I repeat ONLY flash official firmware that is only for your phone. If you flash a different models firmware, then it causes hard brick. Since you flashed 5.1, there is no possible way to downgrade at the moment. And if it was uscc, it would say xt1055. I know because I have one.
Sent from my Moto X using Tapatalk
flash manually tmo retail xt1053 rom thats for you phone.
days ago i flashed brazil retail radio on top of my xt1053 with official stock US OTA 5.1 and got imei 0 as well. fixed it downloading tmo retail rom and flashing that radio only (NON-HLOS.bin and fsg)
Sent from my XT1053 using Tapatalk
I have sprint version of moto X (it's XT1056) , i unlocked it and i'm using it on gsm carrier . it's Bootloader unlocked.
I'm trying to convert it on EU version (1052) , i've flashed XT1052 stock lollipop rom with RSDLite , but i've lost IMEI/Baseband, after that i've recovered them with flashing fsb and nhlos files from sprint official kitkat rom.
So , this is a part where i need help, isn't there any way to flash 1052(in my case) official rom with working baseband and phone functions?
Hi all.
I've been trying to get my Moto X (XT1053, Asia Retail) to stock. I flashed a ROM for the US accidentally, a while ago. Now, I've lost my IMEI (*#06# says 0). Fastboot is still able to display the correct IMEI(3*********). Anyone has the stock ROM that shipped on the Indian version? I tried one but the bootloader won't downgrade.
tech_master said:
Hi all.
I've been trying to get my Moto X (XT1053, Asia Retail) to stock. I flashed a ROM for the US accidentally, a while ago. Now, I've lost my IMEI (*#06# says 0). Fastboot is still able to display the correct IMEI(3*********). Anyone has the stock ROM that shipped on the Indian version? I tried one but the bootloader won't downgrade.
Click to expand...
Click to collapse
@Uzayr @Megatron007 guys please help stuck with same issue
Flash the correct factory image for your phone. XT1053 is not asia retail, it's US GSM.
XT1052 is Asia Retail.
A few details:
First, I'm running 100% stock everything. However, this issue has also happened on Cyanogenmod 13, and both Motorola support and my carrier aren't very helpful, telling me to clear the cache which obviously hasn't worked.
I did an OTA update from Android 5.1 and I get no signal at all now. I have no idea why this is, it only seems to occur on Android 6.0.
What model is your device? Have you tried just flashing the modem files for your device?
Red_81 said:
What model is your device? Have you tried just flashing the modem files for your device?
Click to expand...
Click to collapse
Apologies, I should add this as an edit. Model number says Moto X (2nd Generation), System version 24.11.18.victara_tmo.tmo.en.US tkpca. Not sure what else you need, modem files have been reflashed but still no luck Out of ideas.
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
md07 said:
what is "tkpca" end of system version? Telus ? And this FW is for T Mobile XT1095. I guess your phone is XT1097. Maybe you flashed wrong FW before update . You should flash right FW or you can flash only modem to get signal back
Click to expand...
Click to collapse
It worked on the 5.1 FW that I flashed though, and doesn't work on any version of 6.0. I flashed the FW provided by Moto on here:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images (Moto X (2nd Gen) Pure Edition: L-5.1-LPE23.32-21.3 TMO)
(And yes I have reflashed the modem)
I had this issue too with the OTA I received on xt1092 EU. I reflashed the modem with 5.1 fw, while keeping everything else on 6.0 fw. Worked for me, might work for you too. Good luck.
I have the same issue, on what I had thought was an EU xt1092. I uploaded the xt 1095 5.1 stock files to it a while ago and rooted and it has been fine. Did Marshmallow original OTA yesterday and it's lost cell signal. Some more investigation shows the imei of the phone to a be a AU variant! Wasn't expecting that. Reflash to xt1095 stock 5.1 bought service back again. Have tried a few different modem files, But I can't get signal with 6.0. Any ideas? Or any magic modem files . I also can't sideload the EU 6.0 OTA, it fails with signature problems.
I'm experiencing the same problem. I received the OTA a few days before Christmas, and now I'm still without signal. Just tried flashing Android 5.0 modem partition (from Motorola), but it didn't work.
My phone is the XT1097, but everywhere I searched said that the XT1097 and XT1095 were the same phone. I'll try flashing the modem partition from the 5.1 recovery image, I'm just waiting for Motorola to give me access to it.
EDIT: and yes, I flashed 5.1 from Motorola and it worked like a charm. Then OTA came and it messed up my phone's signal.
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
RockyTV said:
Just flashed the 5.1 image modem, and it still doesn't work. Any ideas?
Click to expand...
Click to collapse
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
TobeXtobes said:
I have 5.1 modem files from moto for the xt 1095 and they haven't worked for me .
StillBrilliant, did you have the 1092 modem files or the 1095 ones? If you have 1092 is there any chance you can post them.
Click to expand...
Click to collapse
You need the xt1092 modem. However there is more than one xt1092. Do you have reteu, retes, or retde?
Sent from my XT1095 using Tapatalk
AGISCI said:
The modems from xt1095 and xt1097 are not the same. Which xt1097 do you have?(country and carrier)
Click to expand...
Click to collapse
My XT1097 is from Brazil, no carrier, bought it directly from Motorola's site. The weird thing I've found is that the update version has retbr in its name.
EDIT: fixed it. Found a thread that had the retail images for XT1097. Downloaded the Brazil version and flashed the modem. It works now.
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
TobeXtobes said:
I thought mine was a reteu, but not so sure now.... Imei listed it as an Australian phone! (I bought it from someone who reviews tech) I am in the UK, but now not so sure which modems I need!
Click to expand...
Click to collapse
In fastboot run:
fastboot getvar all
It should tell you what the phone truly is.
Sent from my XT1095 using Tapatalk
Ah, ro.carrier says reteu
TobeXtobes said:
Ah, ro.carrier says reteu
Click to expand...
Click to collapse
Ok, here is the full 6.0 for reteu:
http://www.filefactory.com/file/6q0pj4hr2sh5/VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml.zip
Use the commands in fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
That should get you back on the correct modem for your phone. Or if you want just flash everything in this zip to be 100% stock 6.0 for the reteu model.
Sent from my XT1095 using Tapatalk
Thank you, I think I might flash the whole thing back to stock with that and start again.
As a bit of a newb here, the fastboot system system.img command isn't working for this chunked image. What is the system image command for sparse, or the quickest way to rechunk them together. I've been searching but I have come up with about 15 different methods!
By the way, flashing the modem files from that image worked. Thank you but I would still like to go back to stock.
Same issue signal drop after upgrading to 6
i am having the same issue after upgrade to 6. Signal drops a lot. Works fine when connected to 3g or 4g networks, but drops to 2g networks. What could be the reason.