Hi,
My Gear Live is stuck at 5.0.1. How do I update it? Any help?
newToGearLive said:
Hi,
My Gear Live is stuck at 5.0.1. How do I update it? Any help?
Click to expand...
Click to collapse
Factory reset it and leave it charging. The update will begin. Also if you need to root use the tool in the development forum
Sent from my SM-N910T3 using XDA-Developers mobile app
I had a developer version on my watch. Watch reset didn't do anything. I did attempted to flash it, but obviously didn't get something right and at this point my watch showing green android with red thanks on top and asking to sideload a file.
You will need to sideload the stock rom now. If you search the entire forum the answers are there. I am very busy or I would be able to help you out more.
Sent from my SM-N910T3 using XDA-Developers mobile app
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
http://forum.xda-developers.com/showthread.php?t=3355974
Sent from my SM-N910T3 using XDA-Developers mobile app
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
http://forum.xda-developers.com/showthread.php?t=2846696
Sent from my SM-N910T3 using XDA-Developers mobile app
Related
Never thought I would have to make this kind of thread... But anyway. I was going to update to 4.3. So I updated to the new firmware. That ran fine and I figured I should wipe my phone. When I got to twrp I noticed the buttons weren't working. So I shut down and restarted normally. Phone boots up fine, but the screen still isn't working. Then I noticed that twrp had a new version. So I download that, but flashing from fastboot doesn't work. It gets to writing recovery then fails(remote: not allowed). I am s-off. SO CONFUSED
tldr: phone screen is not working, can not update to twrp 2.6.3.0 to flash a 4.3 rom
Downgrade tp firmware to 1.29...will send link.
Sent from my HTCONE using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
http://forum.xda-developers.com/showthread.php?p=46225907
Sent from my HTCONE using XDA Premium 4 mobile app
---------- Post added at 12:46 PM ---------- Previous post was at 12:46 PM ----------
Just the touch panel firmware.
Sent from my HTCONE using XDA Premium 4 mobile app
I am getting the "maximum roll-out exceeded" message on my device, so I tried to plug in the gear to my computer, and update via Kies. However, when I plug in my gear, Kies does not stop searching for new gear firmware. Kies will recognize that a gear is plugged into the computer, but it does not display the current Gear firmware verson, and the line that is supposed to display the latest firmware version only says "searching..."
Has anyone else had this problem, and if so, was anyone else able to fix the problem?
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
brookfield said:
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
It appears that I have version 2.6. I tried Kies 3, it told me that the gear was not supported, so I went back to 2.6, where I had the searching problem
I just saw a note in another thread about installing a latent version of Kies to allow for support of devices that are not running newer versions of firmware. Going to give that a shot. I'll post my findings shortly.
---------- Post added at 07:45 PM ---------- Previous post was at 07:17 PM ----------
The earlier version of Kies found the device and updated the firmware to MK7. All is working well now!
Thanks to everyone!
I'm on Kies 2.6 & W8.1 But kies not seeing my gear, usb debugging is on
CISPhD said:
I just saw a note in another thread about installing a latent version of Kies to allow for support of devices that are not running newer versions of firmware. Going to give that a shot. I'll post my findings shortly.
---------- Post added at 07:45 PM ---------- Previous post was at 07:17 PM ----------
The earlier version of Kies found the device and updated the firmware to MK7. All is working well now!
Thanks to everyone!
Click to expand...
Click to collapse
Might you have a link to that other thread?
I didn't have to turn on debugging on my gear for it to work on my windows 8.1 machine
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
brookfield said:
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
The gear runs an earlier version of android hence the issue.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
colts187 said:
I didn't have to turn on debugging on my gear for it to work on my windows 8.1 machine
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
The gear runs an earlier version of android hence the issue.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Do you or anyone have kies 2.7?
Ta
Can't find Kies 2.7
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
pls help i was trying to root my gn3 sm-n900a but i dont know what happened the phone is giving me errors like unfornately direct pen input has stopped
Use the restore to MJ5 thread in the general section to get a fresh start.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 06:34 AM ---------- Previous post was at 06:33 AM ----------
You could also try a factory reset first.
Sent from my SM-N9005 using XDA Premium 4 mobile app
ramkhansingh said:
pls help i was trying to root my gn3 sm-n900a but i dont know what happened the phone is giving me errors like unfornately direct pen input has stopped
Click to expand...
Click to collapse
Just as greydiggy said, use the MJ5 restore method or just install a custom ROM.
Anyone can upload it please? I have unlocked bootloader,rooted B136 and i don't get the update. Sorry for my bad english and thank you for advance.
http://forum.xda-developers.com/showthread.php?t=3419586
Stock Rom is here.
Sent from my EVA-L19 using XDA-Developers mobile app
---------- Post added at 12:54 PM ---------- Previous post was at 12:54 PM ----------
Stock Rom is here
http://forum.xda-developers.com/showthread.php?t=3419586
Sent from my EVA-L19 using XDA-Developers mobile app
datwoelfi said:
http://forum.xda-developers.com/showthread.php?t=3419586
Stock Rom is here.
Sent from my EVA-L19 using XDA-Developers mobile app
---------- Post added at 12:54 PM ---------- Previous post was at 12:54 PM ----------
Stock Rom is here
http://forum.xda-developers.com/showthread.php?t=3419586
Sent from my EVA-L19 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank You Very Much!
Sent from my EVA-L19 using XDA-Developers mobile app
Can we flash this on a L09 variant?
No
Sent from my EVA-L19 using XDA-Developers mobile app
can i flash it for EVA-AL00C00
Hi, I've EVA-AL00C00. Can i replace it with EVA-AL19. Any version of AL19 would be great. Please let me know.
Has no one L19C432B136 or L19C432B166, I need full Rom please!
For those people who search this version also, flash L09C432B136! You end on L19...... and get OTA right after flashing!
Thanks to Sliver_1!!!!
aliensmille said:
For those people who search this version also, flash L09C432B136! You end on L19...... and get OTA right after flashing!
Thanks to Sulver_1!!!!
Click to expand...
Click to collapse
Is it possible?
Thx,
TB
I couldn't believe it, but it really works. You don't lose any files on the phone, it's like a normal update.
I keep finding references to unlocking phones that have been google locked but very little and nothing that has worked to get past the Samsung account locked setup page due to abnormal factory reset. Picked up an S6 AT&T branded for cheap cause the guy said it was Google locked. Not so, it is Samsung locked. I can bypass Google FRP but not Samsungs. Phone is running Marshmallow 6.0.1. IMEI data says it is clean and ready for activation. Serial number is not blacklisted. I can get into the phone settings but cannot change the account information. I even went to Samsung and registered a new account and this phone with the IMEI. Still wouldn't let me log in, says "processing failed." Wondering if rolling it back to lollipop would let me access or clear the Samsung account data. Any ideas would be greatly appreciated.
How did you solve the problem? I have SM-G920A and fw PDJ1 marshmallow 6.0.1
Joe_Hill said:
I keep finding references to unlocking phones that have been google locked but very little and nothing that has worked to get past the Samsung account locked setup page due to abnormal factory reset. Picked up an S6 AT&T branded for cheap cause the guy said it was Google locked. Not so, it is Samsung locked. I can bypass Google FRP but not Samsungs. Phone is running Marshmallow 6.0.1. IMEI data says it is clean and ready for activation. Serial number is not blacklisted. I can get into the phone settings but cannot change the account information. I even went to Samsung and registered a new account and this phone with the IMEI. Still wouldn't let me log in, says "processing failed." Wondering if rolling it back to lollipop would let me access or clear the Samsung account data. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
I know exactly what youre going through. Check out my post about Samsung FRP lock bypassed. kevlar62
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
monciciatko said:
How did you solve the problem? I have SM-G920A and fw PDJ1 marshmallow 6.0.1
Click to expand...
Click to collapse
kevlar62 said:
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
Click to expand...
Click to collapse
kevlar62 said:
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:59 AM ---------- Previous post was at 06:28 AM ----------
It doesn't matter what software you had then it only what you have
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:04 AM ---------- Previous post was at 06:59 AM ----------
Lmk when you're finished that
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:49 AM ---------- Previous post was at 07:04 AM ----------
Are you still working on that? Call me. It's much easier
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
3612003436
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app