Related
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed by with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding. Even I reset tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1 and status modified.
I can goto download and recovery mode. Please advice!
Click to expand...
Click to collapse
torch screen? or you mean touch screen?
iamnoo said:
torch screen? or you mean touch screen?
Click to expand...
Click to collapse
Yes, no responsed, press power button and I can't off it. Removed battery to off. Look like the digitizer was faulty. Due to flash counter = 1 and void the warranty.
Sent from my GT-P5100 using xda premium
After factory reset, I have the bootup screen as shown, , all button on screen were no responded. Please advice. Before upgraded to mb3 firmware, everything was working.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
Click to expand...
Click to collapse
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Edit: kies updated to latest, some result.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
djembey said:
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
I don't think there is any Non-Touch version of TA.... unlucky
Edited:
since your phone is running stock ROM&kernel you can try USB jig, that's the Only thing left to try to get back your warranty. In my case jig won't reset counter but I'm using Custom ROM .... Can't remember how was it on stock. TA works for sure but must be installed first, you can't use your screen so jig is your last chance. ..
Sent from my GT-I9305 using xda app-developers app
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Raistlin1158 said:
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Click to expand...
Click to collapse
Downloaded bma6 pre rooted, no changed in flash counter on download mode. Still 1. Thank for all the suggestion. Cashed closed.
Sent from my GT-P5100 using xda premium
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Raistlin1158 said:
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Click to expand...
Click to collapse
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Usb jig not worked for I9305, counter remain 1. It worked great for I9100.
Sent from my GT-P5100 using xda premium
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
ausdim said:
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
Click to expand...
Click to collapse
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
jetbruceli said:
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
In singapore samsung services was the best compared to other brand, nokie sonyErison no good. That why I stick to Samsung phone. The next was S3 lte for me. The phone on this thread was belong to friend.
Sent from my GT-P5100 using Tapatalk 2
timberwolf60 said:
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
how did u get TA work with urs no respond touch screen????
Hey guys, little bit of a problem, hope you have some ideas.
Basically, My phone has decided it wont be charging anymore, the battery charges fine in my wifes N7000, used 3/4 different charges, all work fine with hers, none which work with mine, looking inside the charging port, it appears to a little burned, theres an area which is quite black inside the port.
So, the phone is rooted and running a lightweight LSZ leak, its not returnable to samsung (and likely, my insurer) in this condition, problem is, if the phone isnt connect via USB, I wont be able to flash an official firmware via ODIN to remove the rootage.
Is it possible for me to perhaps flash an older firmware through CMW and then try and update OTA to remove root, or, am i destined to charge my battery from my missus' phone from now on?
Many thanks!
if you rooted why not use mobile odin to flash a stock firmware..
nokiamodeln91 said:
if you rooted why not use mobile odin to flash a stock firmware..
Click to expand...
Click to collapse
Good point, will this remove root as well?
Written said:
Good point, will this remove root as well?
Click to expand...
Click to collapse
yes, but if it is pro version you are using the make sure to uncheck everroot option.
treacherous_hawk said:
yes, but if it is pro version you are using the make sure to uncheck everroot option.
Click to expand...
Click to collapse
Thanks for the advice treacherous, will the lite version : http://forum.xda-developers.com/showthread.php?t=1347899
suit my needs for coming down to a non rooted stock version that I can return to a samsung support centre?
thanks!
Written said:
Thanks for the advice treacherous, will the lite version : http://forum.xda-developers.com/showthread.php?t=1347899
suit my needs for coming down to a non rooted stock version that I can return to a samsung support centre?
thanks!
Click to expand...
Click to collapse
Yes
Edit: also read thoroughly as you already have the link there are few things you would require to install for the lite version.
Under default settings of mobile odin, it will remove root. But before you go about uprooting, make sure your counter is set to 0. If no then you will need to use triangle away app and it will need root access.
nokiamodeln91 said:
Under default settings of mobile odin, it will remove root. But before you go about uprooting, make sure your counter is set to 0. If no then you will need to use triangle away app and it will need root access.
Click to expand...
Click to collapse
Thanks guys, I already run the triangle remover when i first rooted my phone and the counter is still at 0, plus i am rooted. i notice in the instructions there is some flash kernels, will I need to flash this first via CWM before using mobile odin or will Philz kernel be fine for me?
Written said:
Thanks guys, I already run the triangle remover when i first rooted my phone and the counter is still at 0, plus i am rooted. i notice in the instructions there is some flash kernels, will I need to flash this first via CWM before using mobile odin or will Philz kernel be fine for me?
Click to expand...
Click to collapse
It is an apk file.
I think for the lite version you will need to download the odin flash kernel first. Just follow the instructions. The paid version automatically downloads it.
Thanks again guys, one final question then, if you was returning your note to the Samsung centre would you use the kies GB, ICS or JB official ROM? Considering making it the JB, what do you think?
Sent from my Nexus 7 using xda app-developers app
Written said:
Thanks again guys, one final question then, if you was returning your note to the Samsung centre would you use the kies GB, ICS or JB official ROM? Considering making it the JB, what do you think?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
you can take it to service center with JB or any of 2 older versions, does not matter.
Edit:as long as firmware is for you country and samsung has released Jelly Bean in your country.
Luckily the Netherlands has LSZ so that's what I'm going for tonight, thanks for the help gents!
Sent from my Nexus 7 using xda app-developers app
Good luck
Hi,
I'd like to install CM to my tab. I've read its quite complicated, and you can brick your device quite fast. Could anyone provide a detailed and relatively safe solution to upgrade from 2.2(!)?
Do I need to root first, and install cwm?
Thanks a lot!
Theoretically you don't need root, only need cwm.
But for 2.2, many has locked bootloader that prevents flashing non samsung signed stuff.
So you need to root to then check the bootloader if it is locked. If locked, then apply a patch. That is why root is needed.
Sent from my GT-N7100 using xda app-developers app
Can I use doomlord to root it? Or is there another way?
Sent from my GT-P1000 using xda app-developers app
onlii said:
Can I use doomlord to root it? Or is there another way?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Here is what I did:
I was on Froyo too (P1000BVJJ2, Orange France).
I rooted the Tab with z4root with no problem
Then checked if bootlooder was locked with SGT-Bootloader-Patch-v1.00.apk (from Chainfire): it was unlocked
Then flashed Overcome 4.1 (follow the guide)
Then flashed AOKP SGT7 JB-MR1 (from Stimpz0r)
Then flashed CM11 (from terenceng)
No problem at all. You can follow my steps, but don't blame me if it does not work for you !
ohtoulouz said:
Hi,
Here is what I did:
I was on Froyo too (P1000BVJJ2, Orange France).
I rooted the Tab with z4root with no problem
Then checked if bootlooder was locked with SGT-Bootloader-Patch-v1.00.apk (from Chainfire): it was unlocked
Then flashed Overcome 4.1 (follow the guide)
Then flashed AOKP SGT7 JB-MR1 (from Stimpz0r)
Then flashed CM11 (from terenceng)
No problem at all. You can follow my steps, but don't blame me if it does not work for you !
Click to expand...
Click to collapse
I'm stuck at the "root with z4root" problem. The app is freezing and not doing anything sadly. Tried to look up a solution here, on xda forums, but the last thread about z4root I found was from 2011 and its closed now.
Any other idea how to deal with 2.2?
CWM and Rooting Galaxy Tab Stock Rom
onlii said:
Hi,
I'd like to install CM to my tab. I've read its quite complicated, and you can brick your device quite fast. Could anyone provide a detailed and relatively safe solution to upgrade from 2.2(!)?
Do I need to root first, and install cwm?
Thanks a lot!
Click to expand...
Click to collapse
I will guide you..just follow it without fear.
Search and Download "CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS" using Google.
Search and Download Odin v1.7 using Google.
Switch OFF your Tab and switch it ON while holding Volume down button.It gets into Download mode.
Open the Odin application on PC and Now connect the tab to the PC. The Comment 'Added' appears on Odin. If not try other USB ports and I hope you have installed the PC~ADB drivers.
On the PDA section of Odin browse and include the 'CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS' file, do not alter anything.
Click Start, let it do it business.I will Reset automatically.
Now you have a CWM and a Rooted P1000 Tab. Play well
i root my phone then i swich off my phone but it dosnt work only show lg logo and security eror under logo and it will be off after that
what can i do?
help me please!!!
kamiar1370 said:
i root my phone then i swich off my phone but it dosnt work only show lg logo and security eror under logo and it will be off after that
what can i do?
help me please!!!
Click to expand...
Click to collapse
What did you used to root your phone? What android was running?
kamiar1370 said:
i root my phone then i swich off my phone but it dosnt work only show lg logo and security eror under logo and it will be off after that
what can i do?
help me please!!!
Click to expand...
Click to collapse
Downgrade/flash a GB ROM (v20x) x=any ROM and your bootloader is unlocked and you can root and flash custom ROMs. You had ICS installed I guess. This does have a locked bootloader and cant be rooted properly. At least u cant install a custom recovery like CWM or something similar.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Downgrade/flash a GB ROM (v20x) x=any ROM and your bootloader is unlocked and you can root and flash custom ROMs. You had ICS installed I guess. This does have a locked bootloader and cant be rooted properly. At least u cant install a custom recovery like CWM or something similar.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry to disagree but you can install CWM from Rom Manager and can be acces with the phone off ( Volume Plus + G key)
JoKeR[RO-VL] said:
Sorry to disagree but you can install CWM from Rom Manager and can be acces with the phone off ( Volume Plus + G key)
Click to expand...
Click to collapse
Wrong. If you install cwm or whatever other recovery and have the v30 (ICS) bootloader on your phone, it will say: SECURITY ERROR. Which means you are softbricked. If you have the v20 bootloader, it will work, since this bootloader is unlocked by default. That the recovery is accessible via this button combination is true however.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Wrong. If you install cwm or whatever other recovery and have the v30 (ICS) bootloader on your phone, it will say: SECURITY ERROR. Which means you are softbricked. If you have the v20 bootloader, it will work, since this bootloader is unlocked by default. That the recovery is accessible via this button combination is true however.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
Man, I was on V30B stock (now on izs v2) and i could install CWM via Rom Manager and acces it from phone turn off with the key combo. But I have a problem....maybe you know the solve for it. I can't downgrade from ICS, not even with SFT. I can flash ROMs above ICS(JB , KK) but when I try to install a Froyo or GB (stock or custom rom based on GB) i get a bootloop.
JoKeR[RO-VL] said:
Man, I was on V30B stock (now on izs v2) and i could install CWM via Rom Manager and acces it from phone turn off with the key combo. But I have a problem....maybe you know the solve for it. I can't downgrade from ICS, not even with SFT. I can flash ROMs above ICS(JB , KK) but when I try to install a Froyo or GB (stock or custom rom based on GB) i get a bootloop.
Click to expand...
Click to collapse
I already read about your issue and also read about that problem more often, but we never found a solution to that problem... Seems like buggy/read-only storage. Maybe contact a LG dev, hope they can help you. But trust me, if you have CWM running, no matter how you boot in it, you have the GB or even Froyo Bootloader(uboot/xloader, dont remember which one it was exactly...)
But if you had the v30 (ICS) you would see a security error. Did you once maybe install a 2nd init ROM, which allows to boot two different ROMs? If you dont know what I am talking about, I can try to find it. I think it was a ROM by BPaul.
But OT END here. Lets discuss this in your thread.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
I already read about your issue and also read about that problem more often, but we never found a solution to that problem... Seems like buggy/read-only storage. Maybe contact a LG dev, hope they can help you. But trust me, if you have CWM running, no matter how you boot in it, you have the GB or even Froyo Bootloader(uboot/xloader, dont remember which one it was exactly...)
But if you had the v30 (ICS) you would see a security error. Did you once maybe install a 2nd init ROM, which allows to boot two different ROMs? If you dont know what I am talking about, I can try to find it. I think it was a ROM by BPaul.
But OT END here. Lets discuss this in your thread.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
Ok I'll wait for your reply in my thread
Sent from my LG-F180K using XDA Free mobile app
My device galaxy s3 19305 lte is brick. It won't boot up even after I flash the original firmware from sammobile. So I was told that the bootloader is damage. I probably damage it when I was trying to root. The phone only boot and get stuck in the Samsung logo. Please please can anyone point me to a thread where I can repairs the bootloader? Thanks
Da Legend said:
Sent from my LG-F180K using XDA Free mobile app
My device galaxy s3 19305 lte is brick. It won't boot up even after I flash the original firmware from sammobile. So I was told that the bootloader is damage. I probably damage it when I was trying to root. The phone only boot and get stuck in the Samsung logo. Please please can anyone point me to a thread where I can repairs the bootloader? Thanks
Click to expand...
Click to collapse
did you try a dalvik wipe? sometimes it helps
I think you need to flash twpr (you can find it on this forum) then a full wipe, after that, try another rom (i'm using for now a 4.4.4 rom, but tried several 5.02 rom's. Was working fine only a irri noise when i was caling with somebody, think my mic is broken)I would say, try also to use odin multiflasher to reset all settings of your phone, start new from the begin, It can be a nasty problem but good to fix.
killerbee_67 said:
did you try a dalvik wipe? sometimes it helps
I think you need to flash twpr (you can find it on this forum) then a full wipe, after that, try another rom (i'm using for now a 4.4.4 rom, but tried several 5.02 rom's. Was working fine only a irri noise when i was caling with somebody, think my mic is broken)I would say, try also to use odin multiflasher to reset all settings of your phone, start new from the begin, It can be a nasty problem but good to fix.
Click to expand...
Click to collapse
I did the dalvik wipe. And I have twpr installed. The device is running 4.3 and I can't flash other rims coz i'm not rooted. Or can I?
Sent from my LG-F180K using XDA Free mobile app
Flash kitkat official stock rom with Odin .
Did many times. No luck
Sent from my LG-F180K using XDA Free mobile app
Da Legend said:
I did the dalvik wipe. And I have twpr installed. The device is running 4.3 and I can't flash other rims coz i'm not rooted. Or can I?
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
If you have TWRP, you can flash anything. Root permissions apply inside the rom, not inside a custom recovery.
If you're on the recovery, you can flash anything (that your recovery allows).
inside TWRP, find a way to wipe everything except EFS. Format /system , /cache , /data and /data/media if it shows.
daedric said:
If you have TWRP, you can flash anything. Root permissions apply inside the rom, not inside a custom recovery.
If you're on the recovery, you can flash anything (that your recovery allows).
inside TWRP, find a way to wipe everything except EFS. Format /system , /cache , /data and /data/media if it shows.
Click to expand...
Click to collapse
Are you saying that I can even upgrade my device to 4.4 kitkat? Please i just want to be sure. And does it mean that i9305 comes with an unlock boot loader?. Please please reply.
Sent from my LG-F180K using XDA Free mobile app
Da Legend said:
Are you saying that I can even upgrade my device to 4.4 kitkat? Please i just want to be sure. And does it mean that i9305 comes with an unlock boot loader?. Please please reply.
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
yes it should be possible to instal kitkat or lollipop, did that several times, but you have to be sure you're going to use the right rom's (9305 or LTE) if you don't you divice can be bricked.
Are you sure your samsung has root? please download en install root checker from the playstore, this will tell you if your samsung has root!!
i ran this rom a few days (again ihave a personal problem with my mic, on lollipop there is a noise, on kitkat or older roms not) can't find what couses the problem, sadly....
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-t3042318 link isn't availleble
follow the instructions correctly and it should work
killerbee_67 said:
yes it should be possible to instal kitkat or lollipop, did that several times, but you have to be sure you're going to use the right rom's (9305 or LTE) if you don't you divice can be bricked.
Are you sure your samsung has root? please download en install root checker from the playstore, this will tell you if your samsung has root!!
i ran this rom a few days (again ihave a personal problem with my mic, on lollipop there is a noise, on kitkat or older roms not) can't find what couses the problem, sadly....
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-t3042318
follow the instructions correctly and it should work
Click to expand...
Click to collapse
My device doesn't have root!! But i have twrp installed. I was told that I can flash from the custom recovery without root! Please reply
Sent from my LG-F180K using XDA Free mobile app
Da Legend said:
My device doesn't have root!! But i have twrp installed. I was told that I can flash from the custom recovery without root! Please reply
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
With custom rom's better always look for root on your device.
you need this:
http://download.chainfire.eu/232/CF-Root/CF-Auto-Root/CF-Auto-Root-m3-m3zh-gti9305.zip
http://techerrata.com/file/twrp2/i9305/openrecovery-twrp-2.7.0.0-i9305.tarhttp://techerrata.com/file/twrp2/i9305/openrecovery-twrp-2.7.0.0-i9305.tar
Rom: https://www.androidfilehost.com/?fid=95916177934540052 this is a lollipop good working rom
on this url: you find info for using odin to flash the proper software on your gt-i9305!
http://www.droidviews.com/root-and-install-twrp-on-galaxy-s3-gt-i9305-lte/
read carefully and do exaxt the same thing.......suc6