Hello there, I owe Sparkle v(sporut device) it was running very well on CM 13(TWRP recovery 3.0.0-0). Until yesterday When i rebooted my phone but it got struck on bootloop so as usual i went to recovery and wiped data to re-flash rom but I got an error FAILED TO MOUNT '/cache' (Invalid argument) i thought its bcoz my internal storage is not mounted But when i went to Mount And pressed on select storage it showed that my Internal storage( 0 MB) and micro sd card (3280 MB)
and i was also not able to mount(select) my internal storage
and every time i try to flash or wipe something that error appears.
So pls help me out in fixing my device. (i have already tried many ways)
Thanks in advance.
Have you tried flashing the KitKat stock rom posted here with SP Tools?
SP tool? No i havent tried it
pls provide me link for it
droidenforcer said:
SP tool? No i havent tried it
pls provide me link for it
Click to expand...
Click to collapse
http://firmwarefile.com/karbonn-sparkle-v
my computer is not detecting my phone ?
+ I have downloaded mmx A1 stock rom file is it okay ?
droidenforcer said:
my computer is not detecting my phone ?
+ I have downloaded mmx A1 stock rom file is it okay ?
Click to expand...
Click to collapse
Dude you need to use driver auto installer and try switch off your phone and then pull out the battery and reput the battery inside then connect to pc via usb . Maybe then your device'll get detected .
Brother I cant find correct auto driver for SP tool and moreover i have tried by pulling out battery but it didnt worked as well as i tried meta mode I guess my sparkle v is just a paper weight now :'(
Well i found drivers And flashed mmx A1 firmware and now its not booting :,(
Is it becoz of mmx firmware?
(battery is charged)
Guys, pls help me out i'm in Serious trouble
Related
Sorry for my English I will try to explain my problem.
because Spica i Low Legacy device and I don't have time! Sorry that my Post is here.
After rooting everything was fine, but when I try to flash stock firmware somethings happen.First problem is that my PC cannot detect the phone with Odin and adb or mass storage I am 100% sure that the problem are not the drivers because I root that phone on the same PC before a week and of course I try everything on a another computer, but without success.
Download mode Odin cannot detect the phone! after many attempts to fix usb problem now the phone cannot boot , only in recovery (loop)after every start it's show recovery with message
Filesystems:
system: rfs
data: rfs
cashe: rfs
maybe system, data and cache files are erased I don't know.
recovery version is 0.1.3.b5
How can I flash stock firmware without PC. For example HTC devices can flash from SD card - Gold card, and PB99IMG.zip (I can't explain very well what I mean sorry)
Maybe the phone is usb bricked !
working..
recovery - only recovery
Download mode Volume Down + power off + camera ) - but cannot connect to PC and Odin.
not working
after flashing new costume ROM - the same thing - reboot to recovery
installed software on pc
android SDK,Kiesmini_1.0.0.10075_1,Samsung PC studio 1.5.1.10064_2,Drivers for spica on (Windows 7 x86)
really I cant find post like this !!! and sorry for my English
Hello
So my phone is completely dead. I manage to restore the lg logo and go in the CWM revovery(with Optimus Toolkit 6 in 1 v1.1.1) ,but when I try to mount mass storage my PC say that I need to Format my disk. I tryed and it didn't help. CWM recovery is by far I got,before that I used smartflash, nvlfash(10a) and Full Brick Repair (Clean & Easy)(TOOL).
This Full Brick Repair (Clean & Easy) helped me 2 days ago when my phone stuck in lg logo,but now i just stop and say bootloader(bad data).
So what should I do if nothing works for me? Is there any why or my phone is completely bricked?
I'm sorry for bad english or if I wrote something stupid. And yes I looked on forum,google,and other forums and coludn't find anything
I hope this thread won't be deleted
Thanks in advance for help
tejMa_B said:
Hello
So my phone is completely dead. I manage to restore the lg logo and go in the CWM revovery(with Optimus Toolkit 6 in 1 v1.1.1) ,but when I try to mount mass storage my PC say that I need to Format my disk. I tryed and it didn't help. CWM recovery is by far I got,before that I used smartflash, nvlfash(10a) and Full Brick Repair (Clean & Easy)(TOOL).
This Full Brick Repair (Clean & Easy) helped me 2 days ago when my phone stuck in lg logo,but now i just stop and say bootloader(bad data).
So what should I do if nothing works for me? Is there any why or my phone is completely bricked?
I'm sorry for bad english or if I wrote something stupid. And yes I looked on forum,google,and other forums and coludn't find anything
I hope this thread won't be deleted
Thanks in advance for help
Click to expand...
Click to collapse
mate,
I am not sure if the tool kit you are mentioning about. But try to use this one which works perfectly for the O2X P990.maybe it is an issue of the CWM or bootloader if you dont have the correct ROM based on your bootloader.if you have a white LG logo then you are on the old bootloader....if you have the pink LG logo, then you are on the new boot loader.you have to choose the ROM according to the boot loader you have.the other one will not work.
ALL IN ONE TOOL KIT by Spyrosk the excellent developer
Hope this helps
Well with this tool I manage to Flash New Unlocked Bootloader with cwm recovery.
I managed to get in cwm,bet when i want the mass storage it PC say it the disk must be formated. So I tryed that couple of times and it didn't help.
So what should I do? Now I'm stuck in cwm recovery :S
tejMa_B said:
Well with this tool I manage to Flash New Unlocked Bootloader with cwm recovery.
I managed to get in cwm,bet when i want the mass storage it PC say it the disk must be formated. So I tryed that couple of times and it didn't help.
So what should I do? Now I'm stuck in cwm recovery :S
Click to expand...
Click to collapse
try this. http://forum.xda-developers.com/showthread.php?t=1975274
it unbricks your device automatic just follow the instructions
you will get on new Bootloader and cwm 6.x.x also cm10 will be your opperating system.
but if you dont bacup you data anyhow your data will be lost.
I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)
tejMa_B said:
I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)
Click to expand...
Click to collapse
Try another USB cable.
Sent from my LG-P990 using xda premium
tejMa_B said:
I did but this happens every time and I've tryed many times.
I can't post picture because I'm new but it says:
failed nverror 0y120002
command failure: create failed(bad data)
Click to expand...
Click to collapse
did you install the nvflash driver?
GUYS!!!! read again, he is stuck IN cwm, he wants to connect to USB mass storage... now I assume he wants to copy a rom into the external SD card, but he can't do it (obviously) because PC can't recognize the phone (but he is a noob, he doesnt know that).
Now to continue your quest you CANT connect you phone to your windows PC until you install a rom, to install a rom you need to have a file compressed in .zip in your microSD card, you need to remove your microSD card from your phone and use an USB adapter and plug it to your PC and copy a rom to your microSD card and insert it to your phone and now in CMW flash the rom (flash means intalling) and you're done , if you can't do it then download a stock rom in KDZ or FLS format, to flash your rom, but I seriously suggest you do the first recommendation, flash the rom with nvflash.
If you get stuck again don't forget to ask, some will want to help and reply :good:
Hello ned help..
rm-1030 flashing rom 2.1.0.12 complete Done
i have two version
RM1013_059V788_2.1.0.12 and
RM1013_059V786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059V78 always stuck at rm1013_2.1.0.13_user_NON-HLOS.bin
and shown error dialog "failed using firehouse protocol"
need help..
ive try to redownload ROM.. but keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
maybe the firmware you downloaded is corrupted.. where did you downloaded your firmware files? I use navifirm+ but yesterday I'm trying to redownload a rom but navifirm+ seems to be not working any more..
thaks for replay,
iv downloaded from Package Majnager .. and from this seidea.com/tag/rm-1013-2-1-0-13/
its still blank screen and just detect "emerency connecivity
first download nokia-x2-tools.v.1.2.en.exe, from the tool install drivers.. then go to your "C:\ProgramData\Nokia\Packages\Products\RM-XXX" and delete all files or move it somewhere if you don't want to delete.. and replace everything with the files that you downloaded.. and run "Lunch Nokia Care Suite" as administrator.. and flash your firmware..
thaks...
I thinks its hardware problem.. coz i have 5 different firmware and already used maximal method
change folder.. remove.. redownload.. and anythink
and my phone cant detect fastboot or recovery
btw thaks
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
I have exactly same problem havent found solution yet.
I have same problem too
arisjb said:
hello ned help..
Rm-1030 flashing rom 2.1.0.12 complete done
i have two version
rm1013_059v788_2.1.0.12 and
rm1013_059v786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059v78 always stuck at rm1013_2.1.0.13_user_non-hlos.bin
and shown error dialog "failed using firehouse protocol"
need help..
Ive try to redownload rom.. But keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
Click to expand...
Click to collapse
Remove battery from device atleast 1min
Insert battery
Start device in bootloop and if not start only connect to PC
Start Nokia care suite >product software > open product> select device and flash
jepr0x1011 said:
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
Click to expand...
Click to collapse
My Nokia X2 had also give completely dead. I tried to Flash stock ROM in it via Nokia care suite and which I've even done previously however this time my phone had gone completely blank and does not even go to recovery mode. It has gone completely unresponsive. Please help me on this.
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Have you installed Lenovo's USB drivers?
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi install USB driver properly not regular driver search how root k3 on xda at this thread you got USB driver link go head or follow proper step on xda. If solution not work again let me know then I gave next procesed. T thank first you don't worry if you're phone boot .
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi mate..
Don't worry if your phone is stuck in a boot loop. Remove the battery, put it back again and connect your phone to PC with the SP tool loaded with TWRP in download(connect phone after clicking download button). This should install recovery on your phone. In case if this does not work, try other methods over the internet.
If any of the methods don't work, then download a stock ROM from needrom and flash it using SP flash tool. Note that this will erase the data stored in nvram (imei, mac, s/n). I assume that u have taken a backup before. Please do consider this as ur last step if anything does not work
Thanks and good luck...
mi 11 pro with 12.5.12 stable
sorry to ask for the second time , but suddenly the phone began to rebooting himself again and again and when im entering the twrp and try to reboot system im getting a list with a few red raws writing something about error in system .
i dont know how to stop it and i cant do anything with my phone .
please help me
the twrp is working but i cant put the rom file on my phone because the pc doesnt recognize the phone . what to do? how can i put the romon my phone and flash it? ...i think im in a situation of bootloop...
mmns said:
the twrp is working but i cant put the rom file on my phone because the pc doesnt recognize the phone . what to do? how can i put the romon my phone and flash it? ...i think im in a situation of bootloop...
Click to expand...
Click to collapse
Try to copy the ROM from the computer to USB and USB to ur phone
Hi,
i always use an USB-Stick for the ROM's to flash. Just to be sure i can see an zip to flash under every circumstances. (Except those phones which need to be flashed over USB - but the ROM is visible on the PC)
cya
Did you try to format your device?
Dip Air said:
Try to copy the ROM from the computer to USB and USB to ur phone
Click to expand...
Click to collapse
ive made it with sd card reader and didnt make it
mmns said:
ive made it with sd card reader and didnt make it
Click to expand...
Click to collapse
Can u show me the screenshot of the error? If u don't mind.