Phone reboots automatically and continuosly when i put the battery in it. How to fix ?
It appears when the sim is in the phone..
Related
hello
today i update my sgs in kies to froyo. After update phone shows my operator brand, next shows loong time S logo, and go to black screen. In that black screen sgs vibrate 1 time, few seconds later vibrate 3 times, and so on 1 time, 3 times..........................
download mode not work
recovery not work
PC not recognize phone
what can i do ?
Same problem here
Hi,
I was wondering if you managed to fix your problem... the same is happening to me after updating to Froyo through Kies.
Phone simply isn't working properly anymore... just like you described, strange vibration every now and then, it vibrates one time then after a while 3 times, and so on.
Thanks.
the recovery mode and download mode won't work since phone is still on.
vibrate means its restarting and starting.
so remove battery and
and put it back on
try recovery mode and factory reset : ) thats what i did hehehe
This has happened to me. What I did is remove the battery to turn off the phone. Then, I use the three button combination to enter the recovery mode. From there, I did a factory reset and Formatted the phone. It worked fine after that.
I have tried to upgrade firmware to 284, first it failed, then i reflash to 257, but the handheld can't be charge in off mode. When the charger plug in to the port, the handheld restart by itself until the home screen. Now i have succed upgrade to 284, but still there the problem. Any body know how to fix it??
mbah_man said:
I have tried to upgrade firmware to 284, first it failed, then i reflash to 257, but the handheld can't be charge in off mode. When the charger plug in to the port, the handheld restart by itself until the home screen. Now i have succed upgrade to 284, but still there the problem. Any body know how to fix it??
Click to expand...
Click to collapse
Copy that even m facing the same issue....
I'm on bootloader locked and rooted C5302 device on .284 firmware....I installed chainfire3d and the phone rebooted and went into boot loop....i was not able to turn off the phone and m not able to put the phone in flash mode to re flash the ROM.......i even tried the off button in the back but the phone is not turning off....after i press the off button the screen goes black and the phone restarts and the boot loop continues.....aftre complete battery drain and charging the phone finally got the phone working after repairing it with PC companion however now when i switch off the phone and charge the phone automatically turns itself on.....any help on this....
puneethv said:
Copy that even m facing the same issue....
I'm on bootloader locked and rooted C5302 device on .284 firmware....I installed chainfire3d and the phone rebooted and went into boot loop....i was not able to turn off the phone and m not able to put the phone in flash mode to re flash the ROM.......i even tried the off button in the back but the phone is not turning off....after i press the off button the screen goes black and the phone restarts and the boot loop continues.....aftre complete battery drain and charging the phone finally got the phone working after repairing it with PC companion however now when i switch off the phone and charge the phone automatically turns itself on.....any help on this....
Click to expand...
Click to collapse
i have fix my handheld, i reflashed it to 257 first, checked all wipe option, after that flashed again to 284 and checked all wipe option and exclude baseband, after finished it, it worked..
good
good
Last night I play some game and open game killer, suddenly my phone stuck on black screen and repeated shaking. After that, I take off battery then try torn on my phone. When put the battery to the phone, my immediately repeated shaking with black screen.
I try to fix with this option below, but won't work:
Install stock rom [phone immediately restart and repeated shaking after 3s showup emergency mode]
Go to custom recovery [phone immediately restart and repeated shaking after 3s showup custom recovery menu]
I try to fix with this option below and working, but sometimes happen again back to normally after restart a phone:
Go to emergency mode and repeatedly pressing the power button until the installation of stock rom complete.
whether software or hardware error?
how to resolve this with safe way?
Best Regards.
Wrong section Buddy ... !!!
but about that problem , its probably nothing , try to wipe/factory reset ... happend to me couple of times
sorry, for my bad thread place.[emoji13]
Hello,
My friend just brought me a I9305 lte version and it has a bootloop. I was looking for any help via many forums but most of the problems are caused by software modification problems. This phone was never modified, it had stock rom and was never rooted. Phone hanged while writing and sms and it turned of and started to bootloop.
1. Battery was removed for few hours
2. Phone was bootlooping till battery completely charged off.
3. I can't access recovery mode
4. I can access download mode for few seconds and after that phone restarts again(can't press volume up to acknowledge entering download mode only first screen appears for 2-3 seconds)
5. I can enter download mode by only holding menu + volume down.
Phone was in servce and they told that this is due to CPU issue and wanted to charge them for around 180$
6. I do not know what system version it had before.
Any ideas how to unbrick it?
If you are not able to stay in Download mode, then I would also suggest a hardware issue. Especially if no tampering has been done to the phone.
Does the phone get very hot ? such as rebooting due to overheating ?
Hi,
my Phone restarted spontaneously today and is now stuck in a bootloop. I tried to turn it off by holding the power button but that didn't work. Even when I enter the bootloader, the phone continues rebooting all the time. I only see the white htc screen for a second and then the device reboots again and again, until the battery is empty.
I didn't flash anything new before this happened. The device worked pretty well with CM 12.1 for a long time.
Is there a change to repair this? Is it a hardware issue?