Related
How to repair my bricked moto x xt 1052
Hi everybody...
Im new here.
I hope someone resolve it.
My moto x xt 1052 is bricked, means it is not powerup normally, no any screen displayed, no boot image, boot animation, but goes into fastboot mode sometimes on trying to go in it using hardware key pressing i.e. Power and volume down keys.
Here is the brief description what was happened......
My moto was on stock kitkat 4.4.4 for upgrading it to lollipop On 19th jan i was tried to flash cm12 over cm11 nightly as described in that thread , for that i was unlocked my bootloader, rooted it, flashed CWM touch recovery, flashed superSu zip file and flashed cm12 nightly over cm11 as described. But my device was stucked at boot logo. For resolving that issue i was flashed boot.img of prev nightly release(i.e. 1/15) through command promp using commands '' cd Downloads... cd fastboot... fastboot flash boot boot.img.
It flashesh image file successfully and device is booted successfully. I was used it till last 4days and regularly updated cm12 nightly via cmupdater.
But 4days back i was tried to remove warning message of device is ulocked bootloaded which was irritated me using same flash method and logo.bin files which was given in another thread by other members. But my BOOTLOADER IS DAMAGED and no any display was seen. I read many threads to repair it but no anyone give easy step by step guide. I was tried to repair it using motoflasher given in 1 thred. But as shown there no my device was not shown in device manager asQUSB****9** THERE is only adb interface in device manager. Also it says in motoflasher that no device was connected and output was incorrect COM port, which was refused to flash bootloader. Another thred of rescurrection of bootloader is not so easy and also download links are not useful,shows item was removed.
There is no another way, i thought bootloader is a kernel, so i was flashed zwiel kernel by same flashing method by cmd.
The problem remaims same, moto care told thay it will cost 6k for repairong which is too high. The descreltion is given in details for anyone who finds my mistakes and tell me angd give me suggestion. Xda is big deveopers forum, i know someone will help me.. So plzzz help me.
HOW CAN I REPAIR MY BOOTLOADER AND SAVE MY MOTO which will not useful then usable as a paperweight.
Have you tried to simply re flash your stock 4.4.4 firmware via fastboot since you say you can get into fastboot mode? Or rsd your 4.4.4 firmware. If you can get into fastboot mode I think you should be able to fastboot your stock 4.4.4 and be back up and running.
When in fastboot mode and phone plugged in and you type "fastboot devices" does it display a string of numbers for your device? If yes then you are good to go.
I am having a similar issue with a Sprint Moto X (1st Gen). I am able to get to fastboot mode and I have flashed the stock image for 4.4.4 using mfastboot (also re-did it using RSD lite as the boot.img gave errors using mfastboot) but the phone only still boots to a dark screen and vibrates roughly every 15 seconds.
Anyone have an idea on what else I can try? I've been scouring the boards and youtube, but haven't really come across anything on this type of issue.
Has been RDS flashing process totally completed without any errors?
The flash finishes with no errors when it goes to reboot the phone I end up at the same spot of a black screen that vibrates like its powering on then repeats every 15 seconds like its stick in a loop. Odd... I never get the smallest hint to a picture on the screen.
chousue said:
The flash finishes with no errors when it goes to reboot the phone I end up at the same spot of a black screen that vibrates like its powering on then repeats every 15 seconds like its stick in a loop. Odd... I never get the smallest hint to a picture on the screen.
Click to expand...
Click to collapse
Your symptom I'm quoting is what I've seen when a bad logo.bin has been flashed to the phone.
Can you try another? Some are in http://forum.xda-developers.com/moto-x/themes-apps/collection-moto-boot-services-t2885395
Thanks for the suggestion.
I tried a dew different logos but the end result is still the same. Vibrates on power up, no display at all and repeats until I hold the volume down and count to like 10 when the next buzz cycle would happen so I can get into fastboot mode again. I should note that I can't see anything in this screen as well. I was starting to wonder if it was the screen that was the issue but the bootloop has me thinking otherwise.
I have another one with a bad screen and a replacement is on the way. I guess I can test it on this one as well but I'm sure the result will be the same.
I took a gamble on this one thinking I could bring i back to life, I figured the last owner just soft bricked it and flashing the latest stock would override what mess they did. I'll tinker around some more if there are some other options otherwise I can just flip it for parts i guess.
If I run the fastboot getvar all I get all the phone info so it gives me hope that something can be done, I just don't know what, it seems like I keep cycling through the same few processes hoping for a different result. I even tried the power + Volume down for two minutes thing that's supposed to bring up the "other" recovery menu, but with no display, i don't know what happening.
In a last ditch effort I did a tear down and connection check for all the parts so everything has been removed and firmly re-attached, certainly was nice to do that there instead of on the one I know will work once I replace the screen, but it sucks to still come up empty handed. Sorry for the long rant, it's just been a long few days of trying to find ways to bring this phone back to life.
Solved with downgrading
Sorry for bad english.
I had same issue.
But solved prev saturday hole day.
Using manual method instead of rsd.
Make sure u properly installed adb and mfastboot. For that open cmd and type adb. It shows command lines and then mfastboot. It also shows command lines then you are ready to go. If not, google it for how to install adb and also for mFastboot
Then download proper stock firmware for ur device. unzip it, u will get files of system, boot etc. Copy all this files and paste into mfastboot folder. Open command prompt in that folder by pressing shift and right key of mouse.
Then boot your moto into fastboot mode by pressing power and volume down key for a seconds. If u will not get in to fastboot mode try for many times unless u get it. I will get it after trying half hour.
Connect ur device to pc and run commans given in the following link. http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
End with-- fastboot adb reboot. It will reboot ur device.
Enjoy.
Thanks for the steps, I feel like I have done that already save for the few end steps with the oem commands.
So I flashed the print image using that guide and it still vibrates every 15 seconds and no display. I grabbed the retail file from the motorola site (oddly enough they only have TMO on the file name for some reason) and I flash this and it doesn't vibrate every 15 seconds, but still no display... Maybe in the end the display is bad after all...
Like mentioned before, I already have one coming in black for the one that works for sure...so I guess I'll test it on this one as well. Just wish it was as easy to disconnect/connect as my Nokia Lumia was, that took less than 10 minutes!
So, in the end it was the display afterall. I ended up getting another replacement screen as I really did not feel like attaching it and detaching it (yeah, I'm lazy sometimes). After setting up the new screen I plugged it in to charger and what do you know, battery at 0% then the motorola bootloader unlock screen after 5 or so minutes.
Now I have two phones, lol. One screen came without the speaker on the to fro some reason... And I think I just messed up my main phone removing the frame to add in that piece so lint and such doesn't get into the phone so easily... Dang it!
Edit - Yep, now it has a nice rainbow line display across the bottom where the navigate soft button would be... Guess I have to get one more screen!
could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app
sadik2112009 said:
could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
Go to the General Forum there's a dedicated thread with official roms for your particular model. Use download the ROM and flash through rsdlite. Always make a backup since it will wipe your internal storage clean.
Sent from my XT1058 using Tapatalk
sadik2112009 said:
could you please help me??
Iam using moto x XT1052 indian retail model...Many days b4 I have installed 5.1 brazalian lollipop backup via twrp but now i wanna come back to stock rom 4.4.4 kitkat via rsd lite..will it work or will my phone will brick bcoz of degrading process from 5.1 to 4.4.4??
plzz answer me if yes plz tell me the method to come back to kitkat
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
If you installed 5.1 by using one of the TWRP backups, and did NOT flash the leaked OTA zip files, then you should have only touched /system and /boot partitions.. in that case, it would be safe to flash 4.4.4.
thank u so muchh......
KidJoe said:
Your symptom I'm quoting is what I've seen when a bad logo.bin has been flashed to the phone.
Can you try another? Some are in http://forum.xda-developers.com/moto-x/themes-apps/collection-moto-boot-services-t2885395
Click to expand...
Click to collapse
thank you so much... this post saved my moto x...... i am facing this issue from last 15 days. so many pages visited but nothing help, but, after doing this it rebooted. may god bless you!:angel::angel::angel::angel:
Having same problem.
Please help if anyone can!
I can't resolve it by Fastboot in cmd.
I also tried typing mfastboot in all commands.
Having same problem.
Please help if anyone can!
I can't resolve it by Fastboot in cmd.
dont display anything
not charging not boot not start anything
Travisdroidx2 said:
Have you tried to simply re flash your stock 4.4.4 firmware via fastboot since you say you can get into fastboot mode? Or rsd your 4.4.4 firmware. If you can get into fastboot mode I think you should be able to fastboot your stock 4.4.4 and be back up and running.
When in fastboot mode and phone plugged in and you type "fastboot devices" does it display a string of numbers for your device? If yes then you are good to go.
Click to expand...
Click to collapse
I have a moto x of my friend xt1053, dont not what he has done with it.
but
it is in Encryption Unsuccessful Condition.
When I connect to pc. Windows show that motorola xt1053 is connected. device manager shows MTP device under portable devices.
Mototrola USB drivers have been installed successfully.
I can not boot xt1053 into fastboot mode or recovery. Neither by adb/fastboot nor by buttons. (volume down + Power).
adb devices command does not show any numbers as it normally does when device is connected.
how get it back to working condition. any expert to help or happen to be in the same boat?
Moto G XT1068 stuck in "Warning bootloader unlocked" screen! Need help! Please.
Hello community, how are you? Well, my Moto G XT1068 is stuck in the screen "Warning bootloader unlocked" and I do not know how to retrieve it. I tried already reinstall the original firmware but nothing! During the installation process no error is shown but the system does not restart any of foma. I tried to install TWRP for installing a custom ROM and also did not work.
I've read all the other posts on this problem are the forum and have not found a solution.
The problem seems to be this: apparently the installation via fastboot works, however, to reset the machine the problem persists.
Someone please kindly help me? Thankful already!
Here is the solution of Warning bootloader unlocked. Check this out
https://www.youtube.com/watch?v=fOrNYmhmsJ8
Hello...im new here
Im with a xt1064 with bootloader unlocked, i can start on fastboot and flash a new rom with adb, the problem is:
It stucks on warning bootloader, i can't access recovery or any of the options on fastboot because it goes to warning bootloader message and still there until battery runs out.
Ps: i can flash a new rom without problem, but when the device reboot, it stills on warning. Is there any way to solve this? Thanks and sorry for the bad english.
ur able to into fastboot thats good try restoring to original stock firmwire and than if it goes succesful try to try the procedure again.. mayb u missed some step or so?
Sent from my Moto G 2014 using Tapatalk
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????
I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution
Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..
koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:
How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.
my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.
How did you resolve this problem.
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?