Related
well,
got my SGN2 today and now i need a good protector
also seen several cracked glasses so far so i'm also looking into glass protectors
so far i have a simple cheap as hell ebay dry screen protector but i want some thing better
i never used wet protectors before but thats also an option
iakovl said:
well,
got my SGN2 today and now i need a good protector
also seen several cracked glasses so far so i'm also looking into glass protectors
so far i have a simple cheap as hell ebay dry screen protector but i want some thing better
i never used wet protectors before but thats also an option
Click to expand...
Click to collapse
i'm not a materials expert but i think screen protectors will only prevent scratches, not cracks. ( i think someone explained the difference between hardness and toughness in a different thread)
anyway, the forum favorites are spigen, and a new one called just like glass. search for em, plenty of threads talk about them.
if you want crack protection, what you're hunting for is a good case...and considering your history, i'd say go for the otterbox defender.
seen the threads on them... right now the JLG looks good
my main problem is what type to buy, not the brand (also an issue but lesser one)
DRY vs WET vs GLASS, thats the issue
as for cracks... never killed a screen (S1, S2 , Note1...) but i see people who does and also as i see it the new gorilla 2 glass is... well... not that good
Mode of installation doesn't really tell you much about the screen protector.
Zagg/bse/ghost armor/etc are all wet install, just like jlg but they are completely different categories of screen protector.
swyped all these spelling errors from my galaxy note 2
Go with JLG. No problem with the spen and it dont feel like rubber on your finger. The only thing is the rainbow effect but it just happen for me with the screen off.
Realook is the best. http://www.ebay.com/itm/REALOOK-Sam...046765?pt=PDA_Accessories&hash=item3a7bea296d
Again, everyone's opinion varies.
The best surface is glass; if you want to glide your fingertips on a oem like silky smooth surface. Glass also has endurance, unlike polymers, one glass protector can last the life of your phone; and yet remain virtually undetectable.
I am using xgear, the voyager 2 to cover my gnote..and I must say...it has garnered blatantly covetous stares along with many serendipitous glances. It's as though I'm running round in my birthday suit.
I'll never skin my baby with plastic. ....I'd rather go..naked!
Ok..ok..enough phone perv..spigen has apparently also finally decided to show some note 2 love......
Sent from my SAMSUNG-SGH-I317 using Xparent Blue Tapatalk 2
vizographic said:
The best surface is glass; if you want to glide your fingertips on a oem like silky smooth surface. Glass also has endurance, unlike polymers, one glass protector can last the life of your phone; and yet remain virtually undetectable.
I am using xgear, the voyager 2 to cover my gnote..and I must say...it has garnered blatantly covetous stares along with many serendipitous glances. It's as though I'm running round in my birthday suit.
I'll never skin my baby with plastic. ....I'd rather go..naked!
Ok..ok..enough phone perv..spigen has apparently also finally decided to show some note 2 love......
Which case are you using with the glass protector?
Click to expand...
Click to collapse
All you need is a case, in my humble but accurate opinion glass protectors are useless. It's like putting a black bra on a White Ferrari.
Wouldn't the bra protect you car?
swyped all these spelling errors from my galaxy note 2
finalhit said:
Wouldn't the bra protect you car?
swyped all these spelling errors from my galaxy note 2
Click to expand...
Click to collapse
Not really the best of analogies, but yeah, for most of the stuff the "Ferrari" would go through, the "bra" would protect it and I'd rather have the bra be damaged and replaced later. Unless it's a collision, in which case of course, no amount of bras will protect the car.
Of course we all would prefer them without the bra, but most times, the bra is necessary to keep them in prestine shape, especially in the long run, so whenever the bra is taken off, they will still looks nice and perfect.
+1 for JLG!! been wonderful for me, & great DEV!! Just do a search!
[/QUOTE]Which case are you using with the glass protector?[/QUOTE]
I've just been using an oem flip cover. Not much protection away from carpeted floors or a coat pocket am afraid. I'm considering some real world protection myself.
The glass sits just to the inside of the phones metal band. It adds .4mm and the glass edge is beveled.
To see if a particular case might fit, take a look at the Xgear site. They show a couple of cases they sell for the S3 that might help provide some guidance with chosing a compatible case for the N2 fitted with a glass protector. Wish I had more for you, but the bleeding edge can't be all fun and game.....
Sent from my SAMSUNG-SGH-I317 using Xparent Blue Tapatalk 2
This is the only screen protector brand I would get for my phones.
http://www.spigen.com/cell-phone/sa...note-2-screen-protector-steinheil-series.html
I personally think all these screen protectors either wet or dry are supplied by probably a dozen major manufacturers in Asia so the difference in most of them are packaging/marketing. I like dry installs, they are straightforward with less chance of screwup plus the fact you'd be exposing your $700 device with water and soap?
Something like this Korean PET based dry install, same as posted in this thread at 3x less, it's what I have for the gn2 and n7
http://www.ebay.com/itm/5-X-HD-Ultr...614247?pt=PDA_Accessories&hash=item257610fae7
If you want absolute full screen protection, but don't care about using your s pen then go spigen or zagg. If you want absolute clarity, solid protection and a smooth surface that will not get marked up by your s pen, but does not cover every square mm of your screen, then get JLG. If you just want cheapo then you got the wrong phone
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
powerwagon said:
If you want absolute full screen protection, but don't care about using your s pen then go spigen or zagg. If you want absolute clarity, solid protection and a smooth surface that will not get marked up by your s pen, but does not cover every square mm of your screen, then get JLG. If you just want cheapo then you got the wrong phone
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Uh what? I think you mean something like Invisishield. Spigen works just fine without any scratches from the SPen
Scribbled with the Note II
I use the cheap xtreme guard protectors from eBay, 4 bucks shipped for front and rear and provides a little extra grip, wet application and the s pen works great with it.
Sent from my SGH-I317 using xda premium
I would go with jlg so far is the best I have ever used easy to install feels like glass and clarity is awesome play they have great customer service
Sent from my SCH-I605 using xda premium
Greetings alls
I wanted to share my feelings about Zaggs offerings for our phones.
Original HD - Easiest to install with 0-2% dust, however after speaking to Zagg CS about a rainbow issue I was told that over time it will develop and there is nothing you can do about it. In short it goes on fine but after a few weeks you'll notice little lines going down the screen with a rainbow effect, this is how Zagg describe 'normal'
Dry HD - Great idea, works well 0-1% dust, however after installing 6 over a period of time you will notice blemishes, if you install the protector word for word on the instructions you will end up with a line on the protector where the 2nd half of the installation film peels off. In addition to this anything hard coming in contact with the screen like your fingernails, doorkeys. another phone will leave indents in the adhesive under the protector. it doesn't fade or improve over time. No rainbow effect though.
Contour Glass - hardest to install properly 5-10% dust, these seem the best solution, however i bought one and found that the screen has no adhesive which didn't impress me. then the issues start to align it properly if the alignment is out by a fraction then the edges of the screen are far less responsive, not good at all. Because the lack of adhesive on the screen you get the obvious impression that there is a gap which looks horrid too. I've had the protector on and off so many times because the adhesive isn't great and lets dust in, defeating in part the point of a protector.
All Zagg products are expensive and don't work perfectly and i'm starting to think there is no solution for curved phones.
Well thats horrible news... I was waiting patiently for the ZAGG curved protector to be released and now its not got good reviews... at $55 for it I can't justify the price on a chance.
Yeah unfortunately zagg is thebbest option but there not all that either.
Sent from my SM-G935F using Tapatalk
LBTaylor1984 said:
Yeah unfortunately zagg is thebbest option but there not all that either.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Zagg is not the best option currently, there are so many sp options out
Please show me an option that works, I've spent over 200 quid on protectors, nothing has been a long term solution.
Sent from my SM-G935F using Tapatalk
LBTaylor1984 said:
Please show me an option that works, I've spent over 200 quid on protectors, nothing has been a long term solution.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
If the amazingthing screen protector didn't work for me, I was going to go for liquid shields case friendly protector. $7.85 shipped from them direct or ebay has them but more expensive. Tried skinomi but it pulled up with case, and that was before they offered case friendly
I've used Zagg HD dry and yeah it gets blemishes & has orange peel but nothing that stops clarity. It stays put with either samsung view cover led case, PDair holster case and spigen wallet case. If it ever gets to the point where blemishes interfere with clarity then I'll return it for another. I also used Zagg glass on htc M8 - brilliant and Zagg films on iphones 3-4. On that experience I'd stand by Zagg. Just my 4 cents worth
Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.
Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.
hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.
Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.
Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/
asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.
I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.
jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Any you can recommend about $20 and under?
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
I'm using the i-blason tempered glass.
Under $20, it's still on, doesn't interfere with the screen.
It's still going to collect fingerprints and smudges due to the oils in our skin, but it wipes off easily.
jellyhead said:
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
Click to expand...
Click to collapse
thats becuz the neoflex is a rubber 3m film, not plasti-glass. i honestly like Spigen Neoflex screen protector. only downfall is using the pen on it leaves lines where youve drawn .. but cant be felt by your touch
Sent from my SM-N950U using XDA-Developers Legacy app
mlock420 said:
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Click to expand...
Click to collapse
I've never seen this warning before on anything from Amazon.
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Somebody got a knock off, I read. The screen protector he got was plastic instead of glass.
Sent from my SM-N950U using XDA-Developers Legacy app
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Oh wow that sucks but for some reason YouTubers recommend this for s8 and note 8 idk man it looks promising but yeah that warning I've never seen before
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
I have been buying the RhinoShield stuff for my stuff and its held up really well for me.
rhinoshield.io is where you'll find it.. (I havn't logged in long enough that I forgot my account info :/ )
edit: found my login info so now I can add the link:
https://rhinoshield.io/collections/samsung-galaxy-note-8
Plus, nobody else's stuff has any evidence that even suggests it actually works.
I havn't tried it for the note8 but I came by this thread while I was researching if anyone had so figure I'd mention it. It is expensive to get the whole kit (screen protector, bumper, and in this case rear glass protector), but I found it worth it..
I have a cheapo '2.5D' glass and its doing well. Touch response is worse mind.
There is a speaker hole at the top; this needs covering with a bit of tape or you wil get dust between the screen and the protector.
bonerp said:
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
Click to expand...
Click to collapse
I purchased a relatively inexpensive TG protector. While it exhibits many of the drawbacks of TG protectors that aren't full-adhesive (i.e. all of them except the Whitestone Dome), it doesn't have quite the "rainbow effect" that I've seen with other protectors.
Its real downside, though, is its slickness ... I need a more paper-like surface to better control the s-pen. Just the tiniest bit of friction would help. I'm thinking that I may have to go to a film protector rather than TG to get that, though. Does anyone else have this issue with TG protectors?
eglesiaw said:
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Click to expand...
Click to collapse
Ever since the introduction of the edge curved screen (and I have owned the lot) I have never found a decent screen saver. It is a subject on every forum here on XDA and concerning all the Samsung edge models.
I have taken recommendations only to find them useless. Some use a glue, some have a dotted appearance after application some just suck period!
I used a partial screen saver once that just covered the centre of the screen but even that proved awful. Even used Samsungs own on the Note 7 and though that was not glass it also was horrible.
If any peer here does find a working screen protector PLEASE let us know.
Ryland
Whitestone is the best.
I like the Spigen NeoFlex, it's been great so far for me. Went on easily, hasn't peeled off the corners/edge (and I use the Spigen Tough Armor case) and after the 12 hours to settle on the screen it looks great and writing on it with the s-pen feels good too. My personal opinion and the only one I've tried so far on my Note 8
faded03cobra said:
Whitestone is the best.
Click to expand...
Click to collapse
Can the Whiitestone be removed once it's been glued to the Screen?
yes
I got the Bodyguardz glass protector sold to me at the AT&T store (lazy me). The guy installed it and it's ok. Glass protectors have an innate problem in that they sometimes don't transmit touches to the touchscreen itself. This one is no different but it does fit well. And it has a lifetime free replacement policy. I'll keep it to protect my screen.
Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono
Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.
A spigen tempered glass is my all time favorite screen guard.
niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.
This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.
With the bubbles settling behind, a lot of little dust has been captured.
I also notice grainy-ness. I'm likely going to ditch it and just go naked...
I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.
I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.
I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.
I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.