when i open it it stuck on lg logo
i can't access recovery mode (i don't know why
when i make factory reset with the buttons in the phone ,after i check (yes) 2 times and apper the green broken android it;s show lg logo and stuck again
so what i do in this case???????????
You could try either flashing the .kdz file or try to press Power button for a few seconds on the broken android and see if it works.
*pull of your battery an then press all buttons you can find for about 3-5 seconds.
After that reboot your phone.
If this don't work
*There is a special program from lg, you can find this at the official website.
The only thing you had to do is:
1) install the drivers for your phone
2) open the program and connect your phone
3) if the program locate your phone you have won
4) select that you want to Undo update Errors and wait till finished
This are the solutions I used with my D405
Related
I'm trying to flash original LG .kdz rom but I cannot boot in SW Upgrade mode
what I do:
1. remove the battery
2. hold the vol down button
3. plug the USB cable.
what happens:
the LG logo is displayed and after several seconds the screen flashes (like something will start) and then the phone goes off.
I have clockwork recovery installed and custom rom .. I what to try the stock V30 ICS
ANY idea why is this happening ? and how can boot in SW Upgrade mode ??
don't remove battery and try again
be sure to install correct drivers and you should see S/W Upgrade not the LG Logo..if its still not working try it holding harder.
SOLVED
today i try to changed my rom from cm10 to ICS
first i nvflash stefan v28g with CWM and new bootloader, it successfully flash stefan rom and boot normally
second i transfer django ROM to my external sd card with change vold.fstab and flash it through CWM and successfully flash after that i reboot my phone and it is stuck on a lg logo with a unlock padlock icon with lg word with it
third now i'm trying very hard to repair my phone but it doesn't work i try to enter to nvflash mode but it doesn't work even i press it very hard and try to press it with the battery attached but it show me the same image with a padlock and lg word
can't enter to smartflash or software upgrade also
but my phone is still booting but stuck on lg logo with a padlock and lg word to it
how can i repair it i try already tried all but it is required nvflash mode
SOLUTION
ok i managed to solved it by my self
for users who can't enter nvflash, smartflash, CWM and stuck on lg logo and after you flash volume + and - here's what you need to do:
1. press volume + and volume - observe closely the screen you can see a screen that turn on and off quickly (important! don't loose your grip and keep holding the volume + and volume -)
2. press the power button and hold it for 5 seconds and you can hear a sound from your computer or a notification that their is a device that is connected
3. then nvflash
delete
delete
Hi, i try to install a custom recovery but my phone now doesnt power on.
when i try to enter in the recovery it gives me errors that say in red in top of the screen
error boot image signature
5 seconds after power is turned off for batery saving
and when i try to power on my phonr it stay with the lg logo and dont start the phone
can anyone please help me
sker100 said:
Hi, i try to install a custom recovery but my phone now doesnt power on.
when i try to enter in the recovery it gives me errors that say in red in top of the screen
error boot image signature
5 seconds after power is turned off for batery saving
and when i try to power on my phonr it stay with the lg logo and dont start the phone
can anyone please help me
Click to expand...
Click to collapse
Hi,
This should help you restore your phone to working state:
http://forum.xda-developers.com/showthread.php?t=2179126
i already have seen some tutorials where butt my problem is connect the phone with pc, when i press the power and volume down the lg gives-me the error i said and the phone turn off, so i don't know how to connect the phone with the computer ...
just downloand open europe v20a flash it with kdz flasher remove battery put usb cable while holding the volume down after you mast have install lg drivers run kdz flasher slect the kdz and press flash put the battery back and leave the phone the program will freeze is normal dont afraid and after when the phone open unlock your booltader first root it and after downloand rom manager and flash recovery through this app but is not touch recovery is normal recovery
Can't this be solveed by simply reflshing recovery?
The phone gets into s/w mode so just type from terminal
-> fastboot flash recovery "recovery.img"(change with name of img file in this case)
Obviously try with a recovery different from the one you already tried with
EDIT: I accidently posted this in the wrong forum. Im have the international version, not Verizon!
I've been trying to get CM10 on my phone and somehow i messed everything up and now i can ONLY get into download mode.
Im trying to follow this guide to get back to stock:
I. Before You Begin
This will only work using a Windows machine.
This will only work on the T-Mobile US version and versions from outside the US. Do NOT use this on AT&T or Verizon versions.
II. Install the Drivers
Download the LG ADB Drivers and install them (if you don’t already have them installed from the rooting procedure you used).
III. Download the Necessary Files
Download the stock firmware for you specific device here and save it to your desktop (look for it in step 1 of the original post and make sure to choose the firmware file for your specific device version).
Download the LG Mobile Support Tool to your desktop, install it, and then close it once it opens automatically.
Download the FlashTool to your desktop (it’s the .zip file after clicking on that link).
IV. Unroot the LG G2
Turn off the G2 by holding down the power button and keeping it held down until the screen goes black, then continue to hold it for a few seconds after it goes black to make sure it shut down.
Plug the G2 into the computer via the USB cable while holding Volume Up at the same time to put it into download mode.
Right-click the FlashTool .zip file and select Extract All.
Double-click UpTestEX.exe from inside the newly extracted folder.
In the R&D Test Tool window, select the following for each option listed:
Select Type – 3GQCT
PhoneMode – DIAG
Select KDZ file – Click this and select the .kdz file we downloaded in the previous section.
Click Normal web upgrade test.
Click Upgrade Start in the new popup window that appears.
Select Republic of Korea and English for the Country and Language window that appears after that.
Click OK.
When it finished flashing and is all done, turn off the phone and then turn it back on by holding down Power and Volume Down until a screen comes up.
Select Reset (this will finish erasing everything off the device and bringing it back to stock).
Click to expand...
Click to collapse
I get to step where i click upgrade start but i dont get any window where im supposed to select language.
Instead LG Mobile Support Tool starts up and nothing happens.
I dont understand what im doing wrong. Please help me. :/
Kleivis said:
EDIT: I accidently posted this in the wrong forum. Im have the international version, not Verizon!
I've been trying to get CM10 on my phone and somehow i messed everything up and now i can ONLY get into download mode.
Im trying to follow this guide to get back to stock:
I get to step where i click upgrade start but i dont get any window where im supposed to select language.
Instead LG Mobile Support Tool starts up and nothing happens.
I dont understand what im doing wrong. Please help me. :/
Click to expand...
Click to collapse
Have you tried updating the united device drivers?
Sent from my VS980 4G
Do you still have a custom recovery? This happened to me, the same thing actually!
What I had to do was hold Volume Down and Power button until the LG logo shows up, then release ONLY the Power button while still holding the Volume Down button, then press the Power button again.
Or if this doesn't work,
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release both buttons and hold it down again.
You will see a screen that says something like: Hard reset/ factory reset. Just follow the steps stated on screen until it boots you into recovery.
For me it took me to my recovery screen, where I just flashed a older ROM onto it. I then later flashed a recovery file.
It does take me a few times to get into that.
If that doesn't work, I don't know.
Thank you,
Stephen
hiddenfive said:
Do you still have a custom recovery? This happened to me, the same thing actually!
What I had to do was hold Volume Down and Power button until the LG logo shows up, then release ONLY the Power button while still holding the Volume Down button, then press the Power button again.
Or if this doesn't work,
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release both buttons and hold it down again.
You will see a screen that says something like: Hard reset/ factory reset. Just follow the steps stated on screen until it boots you into recovery.
For me it took me to my recovery screen, where I just flashed a older ROM onto it. I then later flashed a recovery file.
It does take me a few times to get into that.
If that doesn't work, I don't know.
Thank you,
Stephen
Click to expand...
Click to collapse
Praise Jesus for this...I about had a heart attack. I have been rooting and installing custom ROMs since the G1...never had any issues. Was in a boot loop and could not get back into recovery for anything.
Nothing!
I rooted then attempted to installl TWRP... the phone turned off then turned on with the android ! icon... it shut off a few mins later. Now, all I get is the buzz and a black screen. LG Mobile Support Tool nor my computer will even recognize the device. Am I truly bricked beyond repair?
Hey, xda-developers !
Here I will write everything I'd done with me phone that have put it into bootloop.
First I dropped it into shower. I qucikly put it out, and dried. It was working till the noon. Then after I was putting my phone into sleep (power button) it was hanging, and I had to pull the battery out and turn it on again. After several resets, I decided to do factory reset, and Install CM11 again, but I wasn't able to pass the "language choose" screen - my screen wasn't recognizing the bottom part of the screen. I mean I could choose my language but I couldn't click "next". Then after restart my phone is stuck at lg logo.
What I tried to do:
Install official LG .KDZ - still LG logo
Recover and update software with LG mobile support tool - still LG logo
I can't turn on my phone without being pluged in charger, I can't get into recovery, I only can get S/W UPDATE.
Do you have any thoughts how I can fix my phone?