Note 5 N920F - Galaxy Note5 Q&A, Help & Troubleshooting

I have a note 5 n920f bought second hand. And this codes appeared on screen after one day. I don t find any firmware for n920f what can i do to get these thing out of my phone?

115dan said:
I have a note 5 n920f bought second hand. And this codes appeared on screen after one day. I don t find any firmware for n920f what can i do to get these thing out of my phone?
Click to expand...
Click to collapse
Hello!i think u have to try to install a app from play store called Phone Info,and check your info device to be shure of your phone,probably it is not an N920F.it's not released.

I made some screenshots

Do you know what are those codes on the margins of the screen?

I think it is something related with developer settings.
Go to settings > developer options.
That's a picture of how is suposed to be your settings

It should be something like a prototype or kinda, because it is made a lot earlier than the actual device

t-shock said:
It should be something like a prototype or kinda, because it is made a lot earlier than the actual device
Click to expand...
Click to collapse
I think so, i need something to get rid of those codes.

115dan said:
I think so, i need something to get rid of those codes.
Click to expand...
Click to collapse
Trying installing the CPU Z. If it has an exynos, then flash the N920C os

t-shock said:
Trying installing the CPU Z. If it has an exynos, then flash the N920C os
Click to expand...
Click to collapse
Is it safe? If something go wrong while flashing i can't revert to original firmware because it isn't one.

115dan said:
Is it safe? If something go wrong while flashing i can't revert to original firmware because it isn't one.
Click to expand...
Click to collapse
as long as they have the very same processor, you shouldnt have "any" issues. Just be sure that you will flash only the PDA/AP and not the BL CP OR CSC.
You may also make a nandroid backup by flashing a custom recovery eg. TWRP and then backup, for being "extra" secure

Related

My Samsung Captivate won't update. Getting "unregistered device"

I got a Samsung Captivate from someone off ebay. I tired running the update through my phone, but of course you can't. It fails at 50%. So I tried to through Kies Mini. Every time i try to, I get Firmware Version: Unregistered Device. It recognizes what phone it is and it recognizes my phone number. I registered the phone on the samsung website, still nothing. Did soft reset, factory restored the phone, and followed the instructions Samsung gave me for Kies Mini. And I don't know if my phone is rooted or not. I'm thinking that may be the possibility. If it is, how can I unroot it?? This is what my phone says in "About Phone":
Model Number: SAMSUNG-SGH-I897
Firmware Version: 2.1-update1
Baseband Version: I897UCJF6
Kernel Version: 2.6.29 jetaek.lee(at)sep-11 #2
Build Number: ECLAIR
I had to put (at) because xda said i can't put outside links in a post because I'm new?? It is the at symbol though.
I don't know if you can tell if the phone is rooted on not through that. But I would really like to get my phone updated soon. I was really looking forward to the Flash Player and the GPS getting fixed since I travel a lot.
Your phone seems already modified. Look at kernel. That is why you got problem when updating via kies. And i bet that phone is rooted already. Or seller unroot when he/she post to sell and kernel it self, it is not a stock kernel, it is a custom kernel.
Sent from my GT-P1000 using XDA Premium App
nodosx said:
Your phone seems already modified. Look at kernel. That is why you got problem when updating via kies. And i bet that phone is rooted already. Or seller unroot when he/she post to sell and kernel it self, it is not a stock kernel, it is a custom kernel.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
how do i bring it all back to stock?? is there anything i can do to the phone to make it like i just pulled it out of the box??
Check and see if you are rooted, I don't think you are, download "busybox installer" from the market and run it. Unless you are rooted it will fail.
Not quite sure if that if a custom kernel actually, I'll look it up.
In the mean time look up how to boot into recovery, if it's blue with 4 options it's stock recovery
If any other color and more options that is clock work mod recovery.
most if not all custom kernels come with clockwork so if you have stock recovery it's most likely a stock kernel.
I'm thinking maybe the original owner used odin one click to restore it to stock and jf6 is the way early version and some newer phones won't even run that so it may no longer be supported by samsung?? Just a theory...
it's blue with 4 options. but i talked to a samsung rep and he thought it was odd that my build number only said ECLAIR and didnt have a number. but i guess he was lazy and didnt look into it.
Did u ever check your product code?
Enter - *2767*4387264636#
Under PCode its suppose to say: SGH-I897ZKAATT
echelonMCRhartgrenade said:
Did u ever check your product code?
Enter - *2767*4387264636#
Under PCode its suppose to say: SGH-I897ZKAATT
Click to expand...
Click to collapse
woah no it doesnt. it says SGH-I897ZKATMB. what does this mean??
Don't worry it wasn't your fault . Probably from the previous owner. When u flash some custom roms it can change your product code for some reason. Samsung Mini Kies also checks this before it updates your phone. If one letter is off it won't update your phone
is there a way i can get it back to normal??
Yes!! U can . But the bad part is that its kinda tricky .
Check out this thread: http://forum.xda-developers.com/showthread.php?t=880223
echelonMCRhartgrenade said:
Yes!! U can . But the bad part is that its kinda tricky .
Check out this thread: http://forum.xda-developers.com/showthread.php?t=880223
Click to expand...
Click to collapse
ugh i was looking at that and i was hoping you wouldnt send me that link :/ lol
BB_THA_NAME said:
ugh i was looking at that and i was hoping you wouldnt send me that link :/ lol
Click to expand...
Click to collapse
Lol!! . There is a video though but its the IMEI number. It still applies to the same folder though .
http://www.youtube.com/watch?v=JqLK_2I-SBM
well my .02 is: STOCK SUCKS​
learn how to flash a custom rom and you will have a billion times the performance/options/control than you would even think of on stock. and it would be easier than worrying about using kies.
^^^^
That is actually true! Trust us! A custom rom is wayyy better than stock
BB_THA_NAME said:
woah no it doesnt. it says SGH-I897ZKATMB. what does this mean??
Click to expand...
Click to collapse
The phone was unlocked and used on T-Mobile.
Sent from my SAMSUNG-SGH-I897 using XDA App
bornjamerican said:
The phone was unlocked and used on T-Mobile.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That just means somebody had flashed a T-Mobile based rom that edited the product code. Check your IMEI in Settings>About Phone to see if it starts with "000" or if it starts with the number 3. If 000 are the first numbers of your IMEI, then you could have a lemon due to a corrupted EFS. I have had the issue myself.
Just an FYI, make sure NOT to post your full IMEI anywhere ever.
A normal IMEI will start with the number 3. EFS is a special area on your phone which stores encrypted info about how the phone identities itself on the network. It is where the product code and IMEI are stored. If EFS is corrupted, your phone will give incorrect IMEI info to the network and eventually you will see bad stuff happen like loss of data connectivity and stuff like that.
ou812bkewl said:
That just means somebody had flashed a T-Mobile based rom that edited the product code. Check your IMEI in Settings>About Phone to see if it starts with "000" or if it starts with the number 3. If 000 are the first numbers of your IMEI, then you could have a lemon due to a corrupted EFS. I have had the issue myself.
Just an FYI, make sure NOT to post your full IMEI anywhere ever.
A normal IMEI will start with the number 3. EFS is a special area on your phone which stores encrypted info about how the phone identities itself on the network. It is where the product code and IMEI are stored. If EFS is corrupted, your phone will give incorrect IMEI info to the network and eventually you will see bad stuff happen like loss of data connectivity and stuff like that.
Click to expand...
Click to collapse
There is any way to get the original imei without having a copy of original rom ???
shaheerali said:
There is any way to get the original imei without having a copy of original rom ???
Click to expand...
Click to collapse
Look at this. It's the reply I posted in the Q&A version of your issue. Give the link I provided a shot.
shaheerali said:
There is any way to get the original imei without having a copy of original rom ???
Click to expand...
Click to collapse
try my thread....will definitely fix your product code...some have mixed results with the IMEI being restored/corrected but anytime my imei was corrupted the generic this always restored both my imei and prod code
http://forum.xda-developers.com/showthread.php?t=881162
echelonMCRhartgrenade said:
Yes!! U can . But the bad part is that its kinda tricky .
Check out this thread: http://forum.xda-developers.com/showthread.php?t=880223
Click to expand...
Click to collapse
Thanks, this worked for me I am now able to update to 2.2 using kies mini

URGENT HELP Stuck at Boot screen

Today I bought an ATT galaxy s6 edge for about $350, I was told it wouldn't boot past the powered by Android screen. I thought it would be an easy flash in odin. So I flaBootscreem ock 0I2 firmware and it passed successfully. But it still won't pass the Samsung logo. I've tried a few other methods people have posted. Like wipe data and cache but it still won't work. Now I feel bad that I spent the money on a paperweight. Anyone have any ideas?
Did you try to flash the latest firmware, with all 4 files via odin?
Here is the link for the latest. https://drive.google.com/file/d/0B6SkpQCi70hHY2NnZExnbThTblE/view
GayCasper said:
Here is the link for the latest. https://drive.google.com/file/d/0B6SkpQCi70hHY2NnZExnbThTblE/view
Click to expand...
Click to collapse
I tried OI2 which is what is on it. And I did flash all 4 files. I'll try the newest one. But I believe the efs file is corrupted
Ok, can you get to the recovery in the phone? Tell me if you see anywhere in the bottom "dm verify verification failed".
xhhb said:
Ok, can you get to the recovery in the phone? Tell me if you see anywhere in the bottom "dm verify verification failed".
Click to expand...
Click to collapse
Yes it does say that at the bottom. I'm in the process of trying to sell it as I don't have the time right now to deal with it. But if its something simple I can download to fix I would. As I also don't have home Internet all download are through my carrier
Oh then its really easy, reflash latest software via odin with the 4 files. In options tab make sure you select the clean efs folder and there you go my friend
SmokeyTech1 said:
Yes it does say that at the bottom. I'm in the process of trying to sell it as I don't have the time right now to deal with it. But if its something simple I can download to fix I would. As I also don't have home Internet all download are through my carrier
Click to expand...
Click to collapse
Were you able to bring it to life?
xhhb said:
Were you able to bring it to life?
Click to expand...
Click to collapse
Yes, I took it into a store and they flashed it for me. The only problem is the efs folder is corrupt and I don't have an imei number and have to manually connect to my carrier, also there's a battery drain

No signal after "stock" rom flash

I have a SM-N9200, which is a China (inc. Hongkong) variety. In order to get Google Play, which is not available in the Chinese version, I flashed the Hong Kong version. But I have no cell signal after flash. Both roms (Chinese Mainland and Hong Kong) are designed for the same model, it should work. Does anyone have any ideas on this? Thanks in advance.
kavinzhao said:
I have a SM-N9200, which is a China (inc. Hongkong) variety. In order to get Google Play, which is not available in the Chinese version, I flashed the Hong Kong version. But I have no cell signal after flash. Both roms (Chinese Mainland and Hong Kong) are designed for the same model, it should work. Does anyone have any ideas on this? Thanks in advance.
Click to expand...
Click to collapse
You should check your APN settings and either select the correct one (if it's there) or create another one. Tap settings, Mobile networks and then Access Point Names.
MrMike2182 said:
You should check your APN settings and either select the correct one (if it's there) or create another one. Tap settings, Mobile networks and then Access Point Names.
Click to expand...
Click to collapse
It's unlikely to be a APN problem, because there is not any signal at all.
kavinzhao said:
It's unlikely to be a APN problem, because there is not any signal at all.
Click to expand...
Click to collapse
My bad I didn't think you meant it like that.. In any case I would suggest you flash back to your other stock ROM and is there some reason you can't just install the .apk files needed to run the play store?
kavinzhao said:
It's unlikely to be a APN problem, because there is not any signal at all.
Click to expand...
Click to collapse
Is your IMEI still intact?
Sent from my SM-N920T using Tapatalk
MrMike2182 said:
My bad I didn't think you meant it like that.. In any case I would suggest you flash back to your other stock ROM and is there some reason you can't just install the .apk files needed to run the play store?
Click to expand...
Click to collapse
Yes, I don't want to void the KNOX warrntary
Jammol said:
Is your IMEI still intact?
Click to expand...
Click to collapse
Yes, EFS OK.
kavinzhao said:
Yes, I don't want to void the KNOX warrntary
Yes, EFS OK.
Click to expand...
Click to collapse
Installing those files manually can't set off the Knox counter to my knowledge.
MrMike2182 said:
Installing those files manually can't set off the Knox counter to my knowledge.
Click to expand...
Click to collapse
But rooting does.
kavinzhao said:
But rooting does.
Click to expand...
Click to collapse
I didn't say to root it you said in your first post that you flashed the Hong Kong version or something so I said to go back to what you were on when you bought the phone and then use Google search for the apks and install them... Nothing root needed here.
MrMike2182 said:
I didn't say to root it you said in your first post that you flashed the Hong Kong version or something so I said to go back to what you were on when you bought the phone and then use Google search for the apks and install them... Nothing root needed here.
Click to expand...
Click to collapse
Thanks, I tried that, but the Google apps kept crashing (missing system permission?). And I have no way to fix that...
kavinzhao said:
Thanks, I tried that, but the Google apps kept crashing (missing system permission?). And I have no way to fix that...
Click to expand...
Click to collapse
There's a way to get it in there on your version but I really don't have time to get into all that but you're not bootloader locked so you should be able to figure this out pretty easily with a few searches.
MrMike2182 said:
There's a way to get it in there on your version but I really don't have time to get into all that but you're not bootloader locked so you should be able to figure this out pretty easily with a few searches.
Click to expand...
Click to collapse
Thank you, will search.

Note 5 is turn off!

Hi. When my note 5 battery was less than 80%, phone turn off. What is this problem? Please, help me for fix it. Model N920F
Someone say that android is wrong. Is it true?
Tural313 said:
Hi. When my note 5 battery was less than 80%, phone turn off. What is this problem? Please, help me for fix it. Model N920F
Click to expand...
Click to collapse
Are you with custom rom ?
Maybe. I dont know exactly.
~ IMaadh ~ said:
Are you with custom rom ?
Click to expand...
Click to collapse
I ask it. Yes, note 5 with custom rom.
Are the yes and so is or yes perhaps?
Tural313 said:
I ask it. Yes, note 5 with custom rom.
Click to expand...
Click to collapse
Did u already try clear data factory reset ?
even not fix try any other custom rom...
http://forum.xda-developers.com/note5/general/galaxy-note-5-display-note-7-rom-t3509600
If still the same flash original firmware with Odin.exe
If nothing works need to check the battery
~ IMaadh ~ said:
Did u already try clear data factory reset ?
even not fix try any other custom rom...
http://forum.xda-developers.com/note5/general/galaxy-note-5-display-note-7-rom-t3509600
If still the same flash original firmware with Odin.exe
If nothing works need to check the battery
Click to expand...
Click to collapse
how do i install twrp to note 5? please, twrp url give me.
Tural313 said:
how do i install twrp to note 5? please, twrp url give me.
Click to expand...
Click to collapse
1st check your model of your device, after download twrp and flash from Odin, do it properly it will brick your device, if you fail or stacked, flash another twrp version. If you still cnt boot, download original firmware for note 5, will be alright, and warranty will be voids if you root your mobile bro..
Check your device model in settings about something like SM-N92**** blah blah blah
https://twrp.me/devices/samsunggalaxynote5.html

FW-8.0.0] S7 EDGE SNAPDRAGON - UNIVERSAL OREO G935UUES4CRG3 July 1/2018 sec

I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw
does wifi calling work this way or no bc its the unlocked version primarily?
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?
@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.
vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip
vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.
The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it
Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.

Categories

Resources