No Mobile Data After Reboot on Cyanogenmod 13??? - T-Mobile LG G4

I keep having this issue with CM 13 where each time I reboot I'll have no mobile data. I had no other choice than to go to stock ROM. What causes this? Can someone find a fix for this? Is anyone else having the same issue???
Thank you for any reply.

same problem here

ale82to said:
same problem here
Click to expand...
Click to collapse
I flashed CM 13 back onto my device a few hours ago and was tinkering around with it to see if I could figure out what the deal was. I haven't figured a perfect fix, but if you turn airplane mode on and back off again, you'll have mobile data for that boot.

Ozzy0708 said:
I keep having this issue with CM 13 where each time I reboot I'll have no mobile data. I had no other choice than to go to stock ROM. What causes this? Can someone find a fix for this? Is anyone else having the same issue???
Thank you for any reply.
Click to expand...
Click to collapse
I haven't heard of a fix either. If you select the network as 3G and reboot it always has a data connection when it comes back, so it seems like an LTE issue.
I just toggle to 3G and the back to LTE and it works.

new nightly supposedly fixed the data issue, heard one guy his data option now sticks to wherever he left it. check out on main original developer section. but i'm still hesitant on flashing because I am having issues as well as many people with 20o (H811), youtube freezing but audio continuing on HD or 60fps or both. tried all CM based ROMs and several gapps, but they all with same symptoms. i guess i'll wait on snapshot or..more stable CM nightlies to release.

Related

[Q] No Network

Hey guys,
Finally found the Q&A for the milestone. Took long enough
Anywho, After installing CyanogenMod9 (Or 7. This problem's occurring on both)
I can't connect to my service provider anymore. Can't even seem to find them for that matter. Anybody else have this issue? Or can somebody help me with it?
Being able to use the update would be nice.
I am having this issue too.
My Milestone was broken (digitizer) and came back from maintenance services last week so I installed the Cyanogenmod 9 nightly build as soon as I got it. I had some problems installing CM so I just got it working a couple of days ago but it is losing the signal with the carrier in places where it used to work with the Original sbf and even with CM7.
I don't always have 0 signal bars but it can't be a problem with the carrier either.
I still haven't found a solution.
I'm using CM9 nightly build 20120627 (i think I will update to a newer version tonight)
Updating to correct baseband for your country might help. Settings - Advanced - Baseband.
mrvek said:
Updating to correct baseband for your country might help. Settings - Advanced - Baseband.
Click to expand...
Click to collapse
I've already done it. It doesn't change anything.
I have enough signal only when I'm outdoors or standing reeeeeaally close to a window.
But thank you, I think I will install CM7 and see what I can get.

[Q] Droid 3 CM10.1 No service Problems

I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the exact same problem. I went insane scouring the web for hours trying to find a single person with the same problem until I finally gave up. Does anyone know the last version that actually worked?
I also have this problem, do anyone have any idea how to fix this problem?
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had similar problems on cm10.1. I have no idea if this will work (I'm outside the US, and my phone asked me to activate the phone), but I also had no service, no data. I changed my network mode from GLOBAL to GSM/WCDMA auto. Now I have service and data (Data after applying the correct carrier apn settings)
I hope this helps you all
P.S. after this step I made factory resets without the need to do the above step again (You only need to put the correct apn settings again if your on networks other than Verizon)

Stuck on "Searching for Service" in CM 10 RC1

I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
mrinehart93 said:
I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
Click to expand...
Click to collapse
Did you lose the ability to make and place calls? And do data and texting still work?
Sent from my XT897 using Tapatalk 2
Get back into a sense ROM and in the dialer ##72786#
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
pbedard said:
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
Click to expand...
Click to collapse
This worked perfectly! Thanks a bunch!
I am also having the same problem. After flashing the latest release candidate. I lost my service and my mobile network state says disconnected now. I've tried everything so far no luck. I've gone back into my original stock nandroid and nothing. No matter what I flash to, phone has no service.
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
j_rivers said:
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
Click to expand...
Click to collapse
did so. I did not get any data whatsoever
Jaye1789 said:
did so. I did not get any data whatsoever
Click to expand...
Click to collapse
You also need to change the CDMA subscription if you're using a simcard.
sent from my m7spr using tapatalk 4
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Vember31 said:
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Click to expand...
Click to collapse
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
mrinehart93 said:
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
Click to expand...
Click to collapse
thanks so much!!! :good: this worked for me. just a heads up though - I accidentally tried this with the cm10.2 nightlies first (despite the fact that this problem exists with those nightlies too) and it ended up causing an error (com.android something continuously popping up...) but this fixed the signal problem after restart with the 10.1.3 RC2 rom.
much appreciated!

Cyanogenmod Installer and 4GLTE

Hey XDA,
Before I get a lot of flaming I want to say I did search extensively and wasn't able to find any solutions/people with the same issue. As I'm new to posting in XDA I am not new to forums so I do know how to search.
I just installed Cyanogenmod via the Installer to test it out and see if it worked on my new HTC One. I am unable to connect to 4g LTE and there is no option for this anywhere (just the general Data Enabled toggle). Anyone have a similar issue or know a fix?
I know with my older phones I would flash an non-JB modem before installing CM, but figured I didn't have to with the installer they released.
Thanks in advance for the help, loving the HTC One so far!
millsmillsmills said:
Hey XDA,
Before I get a lot of flaming I want to say I did search extensively and wasn't able to find any solutions/people with the same issue. As I'm new to posting in XDA I am not new to forums so I do know how to search.
I just installed Cyanogenmod via the Installer to test it out and see if it worked on my new HTC One. I am unable to connect to 4g LTE and there is no option for this anywhere (just the general Data Enabled toggle). Anyone have a similar issue or know a fix?
I know with my older phones I would flash an non-JB modem before installing CM, but figured I didn't have to with the installer they released.
Thanks in advance for the help, loving the HTC One so far!
Click to expand...
Click to collapse
Settings -> More -> Mobile Networks -> Network Mode
change that and you should be good to go (mine is set to LTE/CDMA/EvDO/GSM/WCDMA)
might need to disable / enable data / airplane mode / etc but just play with the settings a bit and you'll get it
(for reference i updated my radio manually, and gapps to 08/20 and using the stable milestone 1 release)(3 zips)
had some links for you but it won't let me post them sorry
Bailx said:
Settings -> More -> Mobile Networks -> Network Mode
change that and you should be good to go (mine is set to LTE/CDMA/EvDO/GSM/WCDMA)
might need to disable / enable data / airplane mode / etc but just play with the settings a bit and you'll get it
(for reference i updated my radio manually, and gapps to 08/20 and using the stable milestone 1 release)(3 zips)
had some links for you but it won't let me post them sorry
Click to expand...
Click to collapse
Unfortunately I've tried all that. I'll have to try a different radio and see if that'll do the trick.
millsmillsmills said:
Unfortunately I've tried all that. I'll have to try a different radio and see if that'll do the trick.
Click to expand...
Click to collapse
You ever get anywhere with this? I'm in the same boat.
noriyori said:
You ever get anywhere with this? I'm in the same boat.
Click to expand...
Click to collapse
I didn't. I'd constantly switch between the different CDMA/LTE choices and could sometimes connect to LTE, but I would also randomly lose service as if my radio stopped working. Went back to stock and everything was working fine so I'm sticking to that.
millsmillsmills said:
I didn't. I'd constantly switch between the different CDMA/LTE choices and could sometimes connect to LTE, but I would also randomly lose service as if my radio stopped working. Went back to stock and everything was working fine so I'm sticking to that.
Click to expand...
Click to collapse
Ah, well, I got mine working. I'm on the 4.4 google edition rom. using the nova launcher > apn, then for the settings just named it "Credo LTE" and used apn=“n.w1.ispsn" and mmsc="http://mms.plspictures.com" and type="default,mms"
all is finally working right. for whatever reason, with root and all I couldn't get the apn-config.xml to save. I put an edited file in there but it kept reverting... I also went into *#*#4636#*#* and changed the preferred network type to LTE/CDMA (auto).
hope this helps anyone on credo!

i loose network connection after time

yo,
i tried stock, cm and vanir rom but on all i lose my network connection after time and have to reboot before i get new data network login. Is there any fix or custom rom to solve it.
Currently use vanir 4.3 stable and iodak 8,5 but i keeps losing connection.
xxlocalxx said:
yo,
i tried stock, cm and vanir rom but on all i lose my network connection after time and have to reboot before i get new data network login. Is there any fix or custom rom to solve it.
Currently use vanir 4.3 stable and iodak 8,5 but i keeps losing connection.
Click to expand...
Click to collapse
this sound like the start of the problem i have. it started with the signal dropping and a reboot fixed it. after a few days i lost all signal and iv never been able to get it back. iv tried changing baseband gone back to stock changed the RIL and nothing has worked. ive pretty much given up on finding a fix.
i am seeing this problem pop up more and more i really hope someone is able to find a fix.
similar problem here. it happens if I leave wifi area without switching wifi off. Effect: high battery drain, sporadically network "locks" and broken sync (reddish network symbol in quick settings). I'm on cm 11 actual nightly,. tried other roms without success.
Fiddling with some settings, but only way to get a temporary fix: reboot to recovery, wipe cache an dalvik, reboot. Afterwards got sync and network (symbol white).
We can only guess at what the issue is, without logs
JoinTheRealms said:
We can only guess at what the issue is, without logs
Click to expand...
Click to collapse
Off corse, will prepare the device and submit next time, I run into issues...
i dunno how to make logs
and on mine it can only be fixed with a reboot
xxlocalxx said:
i dunno how to make logs
and on mine it can only be fixed with a reboot
Click to expand...
Click to collapse
No harm in searching the web and learning something new, right?
Sent from my Nexus 7 using xda app-developers app

Categories

Resources