Related
As the title says guys, i cant put my x8 to flashmode ... when Im pressing the back button , and im pluging in my phone to computer , the Green flashmode diod its not appearing ... a also cant connect my x8 to computer even though i installed latest PCC. Yes i did full wipe and also install another ROM but it doesnot help Really guys please help me with my problem because im running out of ideas what to do ..
Did You install drivers from Flashtool folder?
And - does Your x8 recognize the charger? Cause maybe USB port is damaged.
i did install Gordon's Gate..
Well when i plug in the cable my x8 is charging ..
i also tried to connect my brother x8 to the computer but the same thing happens , i cant enter flashmode and i cant see my sdcard ..
oh yea i forgot to add that the same cable its working on my other computer but not working on this one ;(
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
sidkota said:
You have to keep the back button pressed and then plug the usb cable, and release the button when green light appears...
Maybe this helps!
Click to expand...
Click to collapse
yes thats exactlly what im doing , yesterday it was working perfectly but now it does not . But the key is that the green light its not appearing.I don't know what is the cause of that.
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
sidkota said:
Sounds like something terrible!
Can't the x8 be flashed while in recovery mode? Once this happened to my tab, it wasn't going to flash mode, luckily it flashed in recovery(cwm) mode also!
Click to expand...
Click to collapse
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Bolussimo said:
Did You try to reset Your PC? On my PC sometimes USB ports doesn't work, but after rebooting computer everything is working
Click to expand...
Click to collapse
i did 3 times
proadi96 said:
OK thanks i will try this one thanks you know now i just want to flash to stock so i can see if the connection with computer will work or not
EDIT: its not working unfortunately
Click to expand...
Click to collapse
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
sidkota said:
try bootloader mode also!
---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------
and as u mentioned earliep that it is working on your other pc, try deleting the drivers and the device too, from the device manager, use the show hidden devices option, find ur x8, and delete the drivers! Then try again!
Click to expand...
Click to collapse
OK i tried to look for the drivers but as far as i can see they are not there.Hey does PCC still installs the drivers automatically? because some time ago i remember it was , it was actually saying ''installing drivers'' or something like this , but now i downloaded the newest version and there is only install bar , not any other as it was in previous versions ... maybe thats the cause that i dont have proper drivers?
I have this problem too week ago. I tried to connect and disconnect the usb. Didnt work. When i checked again, usb port on my computer didnt mount my usb cable correctly.
thanks for the thanks......
Sent by my sexy orange W8 using XDA app...................
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
proadi96 said:
Thats actually what i do step-by-step :
1.Plug in cable to my computer
2.Then Plug in cable to my phone
3.In this moment there should pop up notification that says that the phone is connected with computer , and it asks if you want to share sd card or something like this
4.But unfortunately id does not pop up and my computer does not recognize the phone
5.Help...
Click to expand...
Click to collapse
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Pull out all usb connect to pc, uninstall all usb port driver , from system manager, restart pc. plug in you phone.
Sent from my thumb using my eyes
biscoitu said:
Hi proadi, try to remove all drivers of USB remembered devices using USB-View, and then, plug it again and see what happens.
The program is attached on the msg.
PS: Remove all the remembered drivers instead of only the SEMC or such thing
Cheers,
b1s
Click to expand...
Click to collapse
everything is falling apart because it stopped working even on my laptop ;/ I removed all the drivers by the program you provided , Now i will restart my PC and see if its working or not
and PS. I dont have original cable for my x8 ! But it was working and now its not ..
Hallo I'm New on Xda and i am having a problem with my htc One m7
I recently Unlocked my phone with Htcdev.com and i installed Twrp.
Then i was using Cyanogenmod for some time but decided to go back to stock.
Then there was not a problem but till a week ago it started to get in a loop.
It would be on at the home screen for like 10-20 seconds then rebooted.
i solved it by clearing cache today i had the same problem and tried the same thing only it didnt worked.
now i want to put a diffrent rom on my phone but there is a problem fast boot doesnt recognize usb
i have tried everything drivers diffrent usb port 2.0 ( i Have windows 7 )
I am searching for like 4 hours for the solution so i thought why not make my own thread.
So if anyone has a Idea no mather what please and i mean PLEASE HELP ME!!!
Drakkisath said:
Hallo I'm New on Xda and i am having a problem with my htc One m7
I recently Unlocked my phone with Htcdev.com and i installed Twrp.
Then i was using Cyanogenmod for some time but decided to go back to stock.
Then there was not a problem but till a week ago it started to get in a loop.
It would be on at the home screen for like 10-20 seconds then rebooted.
i solved it by clearing cache today i had the same problem and tried the same thing only it didnt worked.
now i want to put a diffrent rom on my phone but there is a problem fast boot doesnt recognize usb
i have tried everything drivers diffrent usb port 2.0 ( i Have windows 7 )
I am searching for like 4 hours for the solution so i thought why not make my own thread.
So if anyone has a Idea no mather what please and i mean PLEASE HELP ME!!!
Click to expand...
Click to collapse
Disconnected the phone from the computer then reboot the computer. Does the phone now show up in Device Manager? If not change USB cables and try again. If the computer recognizes the phone, then you can move files to the phone.
Thanks
majmoz said:
Disconnected the phone from the computer then reboot the computer. Does the phone now show up in Device Manager? If not change USB cables and try again. If the computer recognizes the phone, then you can move files to the phone.
Click to expand...
Click to collapse
I did it and now it recognise but now my problem is twrp says that there is no os how can i put a new os in it? and i can't see it in the device manager ;(
Drakkisath said:
I did it and now it recognise but now my problem is twrp says that there is no os how can i put a new os in it? and i can't see it in the device manager ;(
Click to expand...
Click to collapse
To solve the no OS part, just flash a guru reset or a nandroid backup for your device.
Hope this helps
Sent from my HTC One using XDA Premium 4 mobile app
SBColasito said:
To solve the no OS part, just flash a guru reset or a nandroid backup for your device.
Hope this helps
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That is the problem i can't flash anything because my pc doesnt recognize my phone when i try adb Devices or Fastboot
so i don't understand anything anymore. i just want this to be over with,
btw i tried installing drivers tool-kits etc but nothing worked maybe i need to use a diffrent Pc?
Drakkisath said:
That is the problem i can't flash anything because my pc doesnt recognize my phone when i try adb Devices or Fastboot
so i don't understand anything anymore. i just want this to be over with,
btw i tried installing drivers tool-kits etc but nothing worked maybe i need to use a diffrent Pc?
Click to expand...
Click to collapse
Try using a different USB cable.
SBColasito said:
Try using a different USB cable.
Click to expand...
Click to collapse
i Did still didnt worked "(
Drakkisath said:
i Did still didnt worked "(
Click to expand...
Click to collapse
I've never really experienced connecting my device to the PC won't work. Sorry.
Just buy an OTG cable and put the ROM in a USB and plug it to the OTG cable so you will be able to install the ROM. If you successfully installed the ROM try connecting your device to the PC again.
Drakkisath said:
I did it and now it recognise but now my problem is twrp says that there is no os how can i put a new os in it? and i can't see it in the device manager ;(
Click to expand...
Click to collapse
For the os issue this Frequently Asked Questions - Page 3 Ans E post will help.
If you are still connected to the computer when you are in Recovery, Device Manager will disconnect when the phone boots in bootloader or recovery.
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
Also,I can't find the device in Device Manager,neither in ADB nor Fastboot.
I tried using Windows 8.1 and 7..Same deal.
Thank you!
chris_b0ss said:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
I tried using Windows 8.1 and 7..Same deal.
Thank you!
Click to expand...
Click to collapse
Is it a M8 or a M7, because your title says M8 but you have posted in the M7 forum.
Sorry,I am quite scared.It's M7.
chris_b0ss said:
Sorry,I am quite scared.It's M7.
Click to expand...
Click to collapse
First, follow instructions given in this post to install the latest android sdk-tools and the latest htc drivers. Also make sure you don't have HTC Sync installed on your computer.
Then connect your phone to you computer with the original cable (or any other cable already known to work for data transfer - some usb cable are only providing power), reboot the phone in bootloader mode by holding vol down and power. Make sure you see the red "fastboot usb" caption on the screen, if not use vol up/down and power to select the "fastboot" menu. Once there open a command window form the android sdk-tools folder and type "fastboot getvar all". Copy/paste the ouput of this command here (except the imei and serialno).
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
With your phone in bootloader/fastboot mode, go to your windows device manager, take a screenshot of your device manager and post it here please.
The unknown device is related to my laptop.Nothing happens when I connect the phone.
chris_b0ss said:
The unknown device is related to my laptop.Nothing happens when I connect the phone.
Click to expand...
Click to collapse
Ok so its not detected at all
Might be caused by
a bad usb cable --> Try another one that you are 100% sure its working
a bad usb port on the computer (use only usb 2.0 ports btw)
a problem with the computer ---> Try another computer.
a bad usb port on the phone ---> need to replace the usb/front mic board
Might also worth to fix your laptop drivers problem. Might be causing problem if the "unknown" device is an adapter or usb controller...
Then reboot the computer.
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
chris_b0ss said:
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
Click to expand...
Click to collapse
Its hard to tell, there isn't any background info about what was done on that phone. The usb board is pretty cheap so it worth a try if you are 100% sure everything else is fine (computer, cables etc..)
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
chris_b0ss said:
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
alray said:
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
Click to expand...
Click to collapse
Sorry for the late reply,the phone is now in service,in 1-2 days they should fix the USB board,and I will get back with more info soon.
Thank you very much for your quick answers and for taking time to help me!
Good news,I've managed to unbrick it.I asked a friend with a Mac to check it out,and his Mac recognized with no problems.Installed the Os,but still,Windows can't detect it.I've tried on 2 pc's(7 and 10) with the proper drivers.Weird..
Anyway,thank you for your time @alray !
Hello guys,
I tried updating it to MM from KitKat by simply flashing it via TWRP . The partition table got corrupted it seems. The phone doesn't boot up. No lights glowing. Initially when connected to pc, few drives were shown. Now when I connect it says the USB is unrecognized. In Mi-flash , its not getting detected. Any solutions?
http://forum.xda-developers.com/showthread.php?t=3353289
Sent from my MI 3W using XDA-Developers mobile app
---------- Post added at 03:36 PM ---------- Previous post was at 03:35 PM ----------
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=3353289
Sent from my MI 3W using XDA-Developers mobile app
Click to expand...
Click to collapse
Please do some searching...
Sent from my MI 3W using XDA-Developers mobile app
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=3353289
Sent from my MI 3W using XDA-Developers mobile app
---------- Post added at 03:36 PM ---------- Previous post was at 03:35 PM ----------
Please do some searching...
Sent from my MI 3W using XDA-Developers mobile app
Click to expand...
Click to collapse
U didn't read the whole post I guess. For me, Those drives are not showing up anymore. The device is not getting detected. It says USB cannot be recognized. On Mi Flash Tool , the device is not showing up.
what u have to do is...
1) (if the screen is blank even after power on) power on the device
2) Download SDI and connect ur phone to pc. if it connects with unknown drivers , use SDI to detect those drivers and it will take care of it
(in my case it shows some qualcomm drivers are installed)
3) if everything works fine, put ur phone in FASTBOOT MODE . (i know there is no display but u can continue pressing vol down+ power button , and there will be a detection sound in pc)
4) at this point there will be another sets of driver will get load.
5) use mi flash to refresh your device. it will show some unique character number or just COM port if SDI is used
6) use any stable fastboot rom and select "flash all' script.
7) flash it, it will normally take more time than normal and u will see weird massage during installation. pay no attention to that and don't disconnect phone if u get pissed.
8) and tadaaa...ur phone will become normal.
sid8840 said:
what u have to do is...
1) (if the screen is blank even after power on) power on the device
2) Download SDI and connect ur phone to pc. if it connects with unknown drivers , use SDI to detect those drivers and it will take care of it
(in my case it shows some qualcomm drivers are installed)
3) if everything works fine, put ur phone in FASTBOOT MODE . (i know there is no display but u can continue pressing vol down+ power button , and there will be a detection sound in pc)
4) at this point there will be another sets of driver will get load.
5) use mi flash to refresh your device. it will show some unique character number or just COM port if SDI is used
6) use any stable fastboot rom and select "flash all' script.
7) flash it, it will normally take more time than normal and u will see weird massage during installation. pay no attention to that and don't disconnect phone if u get pissed.
8) and tadaaa...ur phone will become normal.
Click to expand...
Click to collapse
the drivers got installed via windows update. tried flashing, it all worked and completed successfully. The issue now is , the screen is not powering on.
it worked like hell. Thanks a lot buddy.. Problem solved. Mine was windows 10, when I checked the settings, the connection was metered. Hence no drivers were getting installed. Once I changed it , the drivers got downloaded automatically from internet. Then came the driver signature verification, I disabled it, and everything worked fine after that. The screen wasnt powering on even after completion. Then I noticed that the Flashall.bat has to be modified,
as per the thread
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
flashed with changes applied first and then again flashed after reverting the change on the script. The process got completed, but the device wasnt powering on.
tried connecting and disconnecting the phone to pc multiple times , and it just booted up with the logo voila. Thanks a lot guys .
dittualex said:
it worked like hell. Thanks a lot buddy.. Problem solved. Mine was windows 10, when I checked the settings, the connection was metered. Hence no drivers were getting installed. Once I changed it , the drivers got downloaded automatically from internet. Then came the driver signature verification, I disabled it, and everything worked fine after that. The screen wasnt powering on even after completion. Then I noticed that the Flashall.bat has to be modified,
as per the thread
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
flashed with changes applied first and then again flashed after reverting the change on the script. The process got completed, but the device wasnt powering on.
tried connecting and disconnecting the phone to pc multiple times , and it just booted up with the logo voila. Thanks a lot guys .
Click to expand...
Click to collapse
happy to help!!
Hello guys,
Unfortunately I have only ubuntu machine. Can someone help me to solve this issue.
Thanks in Advance!
fix
http://en.miui.com/thread-243483-1-1.html
try this will surely help
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Try to press volume down + power off buttons to enter fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons. I dont know why the light but it worked for me. I used a lamp as you can see in the aatachment.
maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
mose_nd said:
Try to press volume down + power off buttons to enter fastboot mode.
Click to expand...
Click to collapse
Hes phone already booted in bootloader/fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons.
Click to expand...
Click to collapse
This trick is used for phones that refuse to power on, not for the problems described above.
alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
THAK YOU ALRAY AND MOSE, I'm too guessing that it could be the usb port, Because I tired everything which you guys have mentioned in the reply and received all negative results and I think I may have to replace my mobile usb port. Will let you know guys and again thank you so much.
alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
Okay,
Hi guys, thanks for the comments, i did try the above-mentioned procedures and nothing came out in positive and i even replaced mobile usb port still no detection another htc m7 of mine gets detect and when i use the same port and usb mine doesnt get detected what can be done ?
Thanks in advance.