Database Develop

Convert UL00 to L09 and Update to B303

Did someone try to change the firmware on any UL00 device to L09 and uptade to B303?
I changed my Location from UL00-C00B120 to UL00-C433B114 without any Problems.
If i try to change to L09-C432B114 the same way (change build.id etc.) an error appears "incompatible with current version"
Changed Build.id to L09-C432B114/B000 and then tried to update to B114/B145 without success.

Tuerkay said:
Did someone try to change the firmware on any UL00 device to L09 and uptade to B303?
I changed my Location from UL00-C00B120 to UL00-C433B114 without any Problems.
If i try to change to L09-C432B114 the same way (change build.id etc.) an error appears "incompatible with current version"
Changed Build.id to L09-C432B114/B000 and then tried to update to B114/B145 without success.
Click to expand...
Click to collapse
I think you would need to change the details in the file OEMINFO.
If you look in the forums I made a post about converting from L09 to UL00
I recently converted back from UL00 to L09

brumgav said:
I think you would need to change the details in the file OEMINFO.
If you look in the forums I made a post about converting from L09 to UL00
I recently converted back from UL00 to L09
Click to expand...
Click to collapse
change oeminfo back to dualcu/cn or leave as hw/meafnaf?

Tuerkay said:
change oeminfo back to dualcu/cn or leave as hw/meafnaf?
Click to expand...
Click to collapse
From memory I think OEMINFO needs to be hw/eu for L09
But I would need to check when I get home in about 2 hours time
You'll then need to install the CRR-L09C432B114 firmware, which will them collect OTA update to B145...then you can install the B303 MM Beta from the other forum post

brumgav said:
From memory I think OEMINFO needs to be hw/eu for L09
But I would need to check when I get home in about 2 hours time
You'll then need to install the CRR-L09C432B114 firmware, which will them collect OTA update to B145...then you can install the B303 MM Beta from the other forum post
Click to expand...
Click to collapse
OK. red your post again and searched the web for more information.
- changed OEMINFO to hw/eu
- changed ro.build.display.id=CRR-L09C432B000
- loaded the full Update.app for CRR-L09C432B114
- fully unrooted device
- flashed stock recovery
- device made some app updates and now there is a message in the notificationbar "Defect report reminders (Beta version) Prohibit any running behaviour!")
- still tried to do an local update.
- Software install failed! Incompatibility with current version

Tuerkay said:
OK. red your post again and searched the web for more information.
- changed OEMINFO to hw/eu
- changed ro.build.display.id=CRR-L09C432B000
- loaded the full Update.app for CRR-L09C432B114
- fully unrooted device
- flashed stock recovery
- device made some app updates and now there is a message in the notificationbar "Defect report reminders (Beta version) Prohibit any running behaviour!")
- still tried to do an local update.
- Software install failed! Incompatibility with current version
Click to expand...
Click to collapse
Have you done a factory reset during any of the above?

brumgav said:
Have you done a factory reset during any of the above?
Click to expand...
Click to collapse
nope not before.
tried to do a factory reset after the update failed but the facotry reset also failed.

Tuerkay said:
nope not before.
tried to do a factory reset after the update failed but the facotry reset also failed.
Click to expand...
Click to collapse
I had to do a factory reset before I could get the update to install?
You may still be on the UL00 version....check your settings to see if you have things like the permissions manager and the mobile data package details (you know the place where you can change your monthly data allowance and cycle date) because if you still have thm then your still on the UL00 firmware.
I had this happen even though my build was showing as L09.
I took the update.app from the CRR-L09C432B144 zip and placed it in the dload/ folder on the root of the device, and then when it tried to update it said not compatiable, and then asked me if I wanted to download the full package, which it did....but a factory reset was needed in the end for me.
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
Also, something else which I think I had to do was to switch off and then hold both power + and - then press the power on...This took me to a firmware update screen (before booting) where it used my wifi to download the latestest firmware....maybe you could try this....im not certain on the volume button combo...it was either just the - and power on, or just the + and power on or like i said both the + and - and power on

brumgav said:
I had to do a factory reset before I could get the update to install?
You may still be on the UL00 version....check your settings to see if you have things like the permissions manager and the mobile data package details (you know the place where you can change your monthly data allowance and cycle date) because if you still have thm then your still on the UL00 firmware.
I had this happen even though my build was showing as L09.
I took the update.app from the CRR-L09C432B144 zip and placed it in the dload/ folder on the root of the device, and then when it tried to update it said not compatiable, and then asked me if I wanted to download the full package, which it did....but a factory reset was needed in the end for me.
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
Also, something else which I think I had to do was to switch off and then hold both power + and - then press the power on...This took me to a firmware update screen (before booting) where it used my wifi to download the latestest firmware....maybe you could try this....im not certain on the volume button combo...it was either just the - and power on, or just the + and power on or like i said both the + and - and power on
Click to expand...
Click to collapse
like i already said. after changeing the oeminfo and edititing the build.prop, the factory reset always fails at 3%. i also can´t use any update.app file. tried using the update.app from the b145.zip but didn´t work either. i also don´t get an message to download the correct update.
what exactly did you write into the build.prop?
i currently have no permission manager and no mobile data manager

Tuerkay said:
like i already said. after changeing the oeminfo and edititing the build.prop, the factory reset always fails at 3%. i also can´t use any update.app file. tried using the update.app from the b145.zip but didn´t work either. i also don´t get an message to download the correct update.
what exactly did you write into the build.prop?
Click to expand...
Click to collapse
I think I wrote CRR-L09C432B114

@Tuerkay Had the same problem. Let me know if you find a fix for it... I'm searching too.

bgx said:
@Tuerkay Had the same problem. Let me know if you find a fix for it... I'm searching too.
Click to expand...
Click to collapse
tried many different things but nothing worked. Now i´m back at C433B114 until someone finds a solution.
I´m missing so many functions but i won´t change back to C00B160 because my main language isn´t supported well enough

Hi,
I am on UL00C00B160. I want to hawe european version. Is it possible to make UL00C432? If I convert to L09 will the phone still be dualsim?

Iverom said:
Hi,
I am on UL00C00B160. I want to hawe european version. Is it possible to make UL00C432? If I convert to L09 will the phone still be dualsim?
Click to expand...
Click to collapse
European version only supports 1 SIM

Loosing the DUAL SIM capability, which is the real benefit of turning a UL00 to a L09?

plantunes said:
Loosing the DUAL SIM capability, which is the real benefit of turning a UL00 to a L09?
Click to expand...
Click to collapse
The languagesupport kinda sucks for german users, if you use the chinese UL00. To have better support, i changed my location from UL00-C00B160 to UL00-C433B112. This way i have got a better language implementation but lost some features which i´m missing now. I´m not using the dual-sim function which is why there are no cons for me.
But since i have the chinese hardware, maybe it would be possible to activate the dual-sim function.
There are two lines in the Buld.prop
persist.sys.dualcards=false
ro.dual.sim.phone=false
changeing these and some other options could help maybe.

Tuerkay said:
The languagesupport kinda sucks for german users, if you use the chinese UL00. To have better support, i changed my location from UL00-C00B160 to UL00-C433B112. This way i have got a better language implementation but lost some features which i´m missing now. I´m not using the dual-sim function which is why there are no cons for me.
But since i have the chinese hardware, maybe it would be possible to activate the dual-sim function.
There are two lines in the Buld.prop
persist.sys.dualcards=false
ro.dual.sim.phone=false
changeing these and some other options could help maybe.
Click to expand...
Click to collapse
Do you have a CL00 converted into a L09?
If you do, you could change that string "ro..dual.sim.phone" into TRUE and see what happens. It would be absolutely great if that was possible!

I had the same problem than you, so i flashed Boot.img, Cust.img, Recovery.img, system.img and userdata.img (just in case), and it worked. the phone doesn't found the OTA to B145, but i'll try to update manually.

Lightofdarkness666 said:
I had the same problem than you, so i flashed Boot.img, Cust.img, Recovery.img, system.img and userdata.img (just in case), and it worked. the phone doesn't found the OTA to B145, but i'll try to update manually.
Click to expand...
Click to collapse
Flashed all files and then tried a clean update. Didn´t work. My Mate S shows the right Build and Vendor but i´m still not able to use the C432 Update.app´s.
Are you able to update manually?
Is your phone originally an L09 or UL00 device? If it´s an UL00 Mate S, could you tell me exactly what you did?

My phone is originally an L09, but i broke it in UL00C00, can't get back to L09, recovery don't boot, flash via fastboot lead to freeze at boot

Huawei P8 Lite ALE-L02 Stock rom

hey guys, my phone is bricked, i have the l-02 version and i can't seem to find the right stock rom i mistakenly flashed it with a custom rom 6.0 and it did not completely update instead it gets stuck on the huawei logo and i really need the right stock rom, all the ones i have tried keep failing saying update failed. i have tried almost everything, its new so i never got my usb debug on, i dont have my IMEI number but i am desperate:crying::crying::crying::crying::crying:

kayphanga said:
hey guys, my phone is bricked...
Click to expand...
Click to collapse
Dude I have just purchased the ALE-L02 and before I update and root it I want to extract the firmware file for people like you.
If someone can help you will be in luck.
Build Number: ALE-L02C183B120
Country: New Zealand
Vendor: 2Degrees
EMUI: v3.1
Vince

2Degrees appears to have disable the dual sim feature. Any clue as to the easiest way to undo that? I assumed that all P8 lite models were dual sim, but it appears that the firmware differs.

I think to have dual SIM you need to flash another vendor to the phone. This could mess your phone up though if done incorrectly.
I don't know how to do it but I'm pretty sure that's what people have done.
Why do people want dual SIM?

vinyc3 said:
I think to have dual SIM you need to flash another vendor to the phone. This could mess your phone up though if done incorrectly.
I don't know how to do it but I'm pretty sure that's what people have done.
Why do people want dual SIM?
Click to expand...
Click to collapse
Maybe because they want to have 2 SIM cards lol? I have one sim card from my company and the other one is personal

Rebrand to RNE-L21C432 Oreo

Good morning, maybe not the place to ask this but I would like to know if any of you could help me to do the rebrand to RNE-L21C432. I have already done the Rebrand from RNE-L03C25 to RNE-L23C605 and it works without problems (4G, camera and everything), but when I try to RNE-L21C432 4G does not work and if I apply a patch that appears on the internet it appears with 3 gb of ram etc.

acostmisa said:
Good morning, maybe not the place to ask this but I would like to know if any of you could help me to do the rebrand to RNE-L21C432. I have already done the Rebrand from RNE-L03C25 to RNE-L23C605 and it works without problems (4G, camera and everything), but when I try to RNE-L21C432 4G does not work and if I apply a patch that appears on the internet it appears with 3 gb of ram etc.
Click to expand...
Click to collapse
How are you rebranding it, using what tool?

ante0 said:
How are you rebranding it, using what tool?
Click to expand...
Click to collapse
I am flashing the OEMINFO that I found on this website https://forum.xda-developers.com/ma...other-development/oeminfo-collection-t3762385 and I am using the HWOTA to install the system but I see the errors that I mentioned in my first post. I read that the problem could be that that OEMINFO is from android 7 and I'm trying to do the rebrand in android 8. Thanks for asking.

acostmisa said:
I am flashing the OEMINFO that I found on this website https://forum.xda-developers.com/ma...other-development/oeminfo-collection-t3762385 and I am using the HWOTA to install the system but I see the errors that I mentioned in my first post. I read that the problem could be that that OEMINFO is from android 7 and I'm trying to do the rebrand in android 8. Thanks for asking.
Click to expand...
Click to collapse
Why not use the ones included in HWOTA8?
https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115

ante0 said:
Why not use the ones included in HWOTA8?
https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
Click to expand...
Click to collapse
I had used it before and it did not work properly when I flashed the rom, but I'll try again and let you know if it works. Thank you.

acostmisa said:
I had used it before and it did not work properly when I flashed the rom, but I'll try again and let you know if it works. Thank you.
Click to expand...
Click to collapse
Do note that you first need to rebrand to C432, then update to the same firmware you have installed.
Else you end up with a frankenfirmware, or half broken
So first rebrand and flash using HWOTA8, then same cust update

ante0 said:
Do note that you first need to rebrand to C432, then update to the same firmware you have installed.
Else you end up with a frankenfirmware, or half broken
So first rebrand and flash using HWOTA8, then same cust update
Click to expand...
Click to collapse
I did the rebrand and I'm in rne-l21c432 8.0.0.336 but I do not have a 4g signal on my cell phone that's one of the problems I had when I tried it

acostmisa said:
I did the rebrand and I'm in rne-l21c432 8.0.0.336 but I do not have a 4g signal on my cell phone that's one of the problems I had when I tried it
Click to expand...
Click to collapse
Can you post Settings - About screenshot?
And censor out IMEI

ante0 said:
Can you post Settings - About screenshot?
And censor out IMEI
Click to expand...
Click to collapse
https://drive.google.com/open?id=125D6ha6dYobrzVZEUeN6ORugEBpfEuuL
https://drive.google.com/open?id=19vImObL1XDr6AwRF-L-eBAc4eTG48O8O
https://drive.google.com/open?id=15U0BxXGESVIWoTSKg2nN8YbXojOtd4AX
As you can see I only have H + and here I always have 4g

ante0 said:
Can you post Settings - About screenshot?
And censor out IMEI
Click to expand...
Click to collapse
when I enter the mobile networks available and scanned manually to see 4g networks, only 3g and 2g appear. Does the oeminfo have anything to do with the 4g bands of the cell phone?

acostmisa said:
when I enter the mobile networks available and scanned manually to see 4g networks, only 3g and 2g appear. Does the oeminfo have anything to do with the 4g bands of the cell phone?
Click to expand...
Click to collapse
It shouldn't. But it does contain IMEI/MEID/IMEI2/SN (At least on phones released with Oreo).
On Mate 10, for example, HWOTA edits your own oeminfo to the target cust.
You could look into that, it runs a binary included in HWOTA that edits your oeminfo, so you could check script to see what exactly it does and try to execute it in TWRP for your device.
Just keep a backup of your own oeminfo in case anything goes wrong
HWOTA for Mate 10 download: https://mega.nz/#!oeATEQQb!qiP3mYlQQgZYlaS3dbY_QCwNJ-urTKyLQ2zKOA9KP8g
Mankindtw removed it since he believed it caused bricks, but it was actually because of firmware. (New bootloader)

ante0 said:
It shouldn't. But it does contain IMEI/MEID/IMEI2/SN (At least on phones released with Oreo).
On Mate 10, for example, HWOTA edits your own oeminfo to the target cust.
You could look into that, it runs a binary included in HWOTA that edits your oeminfo, so you could check script to see what exactly it does and try to execute it in TWRP for your device.
Just keep a backup of your own oeminfo in case anything goes wrong
HWOTA for Mate 10 download: https://mega.nz/#!oeATEQQb!qiP3mYlQQgZYlaS3dbY_QCwNJ-urTKyLQ2zKOA9KP8g
Mankindtw removed it since he believed it caused bricks, but it was actually because of firmware. (New bootloader)
Click to expand...
Click to collapse
Hello, I have been slow to respond, but I can say that 4G does not work for me with the CUST C432 (Europe), C636 (Asia) and C675 (India). I have been reading and researching and in those regions I do not use band 4 (1700/2100) for 4G, in my country my operator uses band 4 for 4g and the only CUST dual sim that works for me as I mentioned is C605, This CUST is the one used in Colombia and is for band 4 of 4g. This version does not update as fast as the C432, C635 and C675, if someone can tell me how to solve this problem I would appreciate it very much
that is the link of someone who explains that when you change cust you can lose the signal and I think that in my case I lost the 4g signal for that reason
https://forum.xda-developers.com/showpost.php?p=76056632&postcount=31

Note 9 SM-N9600 CSC Change to INS (India) for Enabling Jio VoLTE

Hi All,
Can someone please guide me to a method, if any, to change the CSC of an N9600 model CSC which is currently TGY to INS?
This is to make VoLTE work via the phone dialer instead of using the external Jio4GVoice app.
Is this possible? I know my version is the snapdragon and the Indian version is Exynos 960F or 960FD.
I want to know if the CSC file is processor specific? Can 'only CSC' be flashed via ODIN? If yes, where can i find the CSC files with fast download?
Would it trigger Knox and disable Google/Samsung Pay?

Can someone please provide their inputs?

abhishek.hitman said:
Hi All,
Can someone please guide me to a method, if any, to change the CSC of an N9600 model CSC which is currently TGY to INS?
This is to make VoLTE work via the phone dialer instead of using the external Jio4GVoice app.
Is this possible? I know my version is the snapdragon and the Indian version is Exynos 960F or 960FD.
I want to know if the CSC file is processor specific? Can 'only CSC' be flashed via ODIN? If yes, where can i find the CSC files with fast download?
Would it trigger Knox and disable Google/Samsung Pay?
Click to expand...
Click to collapse
I don't think this will work because the .PIT or partition file is in the CSC image. You would likely require the entire firmware image set to get the support files, frameworks for the dialer. It is not only a matter of a new CSC / region code change.

PulpoRojo said:
I don't think this will work because the .PIT or partition file is in the CSC image. You would likely require the entire firmware image set to get the support files, frameworks for the dialer. It is not only a matter of a new CSC / region code change.
Click to expand...
Click to collapse
So, just for further clarity, I don't want to trip knox or lose samsung/google pay options.
These are my original ROM files:
AP_N9600ZHU1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_N9600ZHU1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N9600ZCU1ARJ6_CP10967940_CL14505206_QB20159196_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_TGY_N9600TGY1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_TGY_N9600TGY1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT.tar.md5
I want to know if i could flash the following files in odin and still have knox and other stuff intact?
AP_N9600ZHU1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_N9600ZHU1ARJ6_CL14505206_QB20159198_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N9600ZCU1ARJ6_CP10967940_CL14505206_QB20159196_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OXM_N960FOXM2ARK2_CL14366801_QB20490073_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_N960FOXM2ARK2_CL14366801_QB20490073_REV00_user_low_ship.tar.md5
If yes, which CSC should i choose in this scenario, Home_CSC or CSC_? I don't mind a factory reset.
The only thing i'm looking for is to have the CSC changed to a multi-CSC which is the OXM version without tripping Knox and Pay features.
Would the PIT file/partition entries be different in N960F and N9600?
I have noticed the .pit file in the extracted CSC files and they have the model numbers written in it when checked with np++.
Also, would this kind of an inconsistency trip knox?

Bump. Can someone please provide me any info.

As far as I know, there isnt a way to use Snapdragon CSC on Exynos without root, so you will be out of luck, also because CSC file is signed with Samsung key, so cannot flash your own without tripping Knox

abhishek.hitman said:
Hi All,
Can someone please guide me to a method, if any, to change the CSC of an N9600 model CSC which is currently TGY to INS?
This is to make VoLTE work via the phone dialer instead of using the external Jio4GVoice app.
Is this possible? I know my version is the snapdragon and the Indian version is Exynos 960F or 960FD.
I want to know if the CSC file is processor specific? Can 'only CSC' be flashed via ODIN? If yes, where can i find the CSC files with fast download?
Would it trigger Knox and disable Google/Samsung Pay?
Click to expand...
Click to collapse
hey, put your jio sim card in sim 1 and format the phone and start it again it will enable JIO VOLTE on your phone.

samkitshah108 said:
hey, put your jio sim card in sim 1 and format the phone and start it again it will enable JIO VOLTE on your phone.
Click to expand...
Click to collapse
Seriously? Have you tried this method? Do you have an n9600 as well?
N9600 does not have the csc for India in the firmware right, how would it work even if I format the phone again?

abhishek.hitman said:
Seriously? Have you tried this method? Do you have an n9600 as well?
N9600 does not have the csc for India in the firmware right, how would it work even if I format the phone again?
Click to expand...
Click to collapse
i also did it my S7 Edge when i was in Israel i installed european version of oreo and csc was not INS. so when i came india and put my jio sim card it does not work bcoz of csc issue. so i put my sim card in the phone and factory reset the device and boom it worked as when u reset the device automatically download and adapts the sim card setting of that country and my VOLTE was enabled. Yes i have N9600 512 GB from HK

samkitshah108 said:
i also did it my S7 Edge when i was in Israel i installed european version of oreo and csc was not INS. so when i came india and put my jio sim card it does not work bcoz of csc issue. so i put my sim card in the phone and factory reset the device and boom it worked as when u reset the device automatically download and adapts the sim card setting of that country and my VOLTE was enabled. Yes i have N9600 512 GB from HK
Click to expand...
Click to collapse
Cool. Awesome! I'll try to do that but I need to back up a lot of stuff from this phone before I do that.
I'll report back after I have something to update.
Anything else that I need tk make sure in the process of doing a factory reset?

abhishek.hitman said:
Cool. Awesome! I'll try to do that but I need to back up a lot of stuff from this phone before I do that.
I'll report back after I have something to update.
Anything else that I need tk make sure in the process of doing a factory reset?
Click to expand...
Click to collapse
i use samsung cloud to take backup of my phone. its so easy, i just click backup on my old phone and on new phone i put my samsung id and click restore, it restore my phone to same to same as my old device including home screen, settings, calls, messages, widgets, folder wise setting, just like a copy of my old phone installs apps and everything. Hope this will help you to same some time.
How i did Factory reset was first i put JIO sim in my phone and then go to setting and click factory reset, then my whole phone was reset and the again i factory reset my phone and everything incl VOLTE was working properly and now after the update u can have both the sim cards on 4G and now it support Dual VOLTE on the phone.

samkitshah108 said:
i use samsung cloud to take backup of my phone. its so easy, i just click backup on my old phone and on new phone i put my samsung id and click restore, it restore my phone to same to same as my old device including home screen, settings, calls, messages, widgets, folder wise setting, just like a copy of my old phone installs apps and everything. Hope this will help you to same some time.
How i did Factory reset was first i put JIO sim in my phone and then go to setting and click factory reset, then my whole phone was reset and the again i factory reset my phone and everything incl VOLTE was working properly and now after the update u can have both the sim cards on 4G and now it support Dual VOLTE on the phone.
Click to expand...
Click to collapse
I just tried the factory reset just as mentioned by you but i still am not able to enable VoLTE in my phone. Are you sure you have an N9600? Can you please tell me which firmware are you currently have? Mine is N9600ZHU1ARJ6.
Still getting the same error "VoLTE is not supported by your current software version. Contact customer services for more details"
Can you please tell me what i am doing wrong?

abhishek.hitman said:
I just tried the factory reset just as mentioned by you but i still am not able to enable VoLTE in my phone. Are you sure you have an N9600? Can you please tell me which firmware are you currently have? Mine is N9600ZHU1ARJ6.
Click to expand...
Click to collapse
My firmware is N9600ZHU1ARJ3 and u put JIO sim card in Sim 1 slot. if it does not come, again factory reset the phone with sim card in the phone.

samkitshah108 said:
My firmware is N9600ZHU1ARJ3 and u put JIO sim card in Sim 1 slot. if it does not come, again factory reset the phone with sim card in the phone.
Click to expand...
Click to collapse
Yes i did that and the sim is in slot 1 only i even removed the other sim from sim 2 slot. I did reset the phone twice like you mentioned in the previous post.
What could i be doing wrong? When you say you're able to enable VoLTE, you're not using the Jio4GVoice app for calling and all right?

abhishek.hitman said:
Yes i did that and the sim is in slot 1 only i even removed the other sim from sim 2 slot. I did reset the phone twice like you mentioned in the previous post.
What could i be doing wrong? When you say you're able to enable VoLTE, you're not using the Jio4GVoice app for calling and all right?
Click to expand...
Click to collapse
i dont know what is the problem in your phone and its not starting. May be you can ask samsung or JIO helpline customer care number and ask them about the issue.

samkitshah108 said:
i dont know what is the problem in your phone and its not starting. May be you can ask samsung or JIO helpline customer care number and ask them about the issue.
Click to expand...
Click to collapse
May i know your baseband version and build number please?

abhishek.hitman said:
May i know your baseband version and build number please?
Click to expand...
Click to collapse
baseband version N9600ZHU1ARJ3
build no. M1AJQ.N9600ZHU1ARJ3

samkitshah108 said:
baseband version N9600ZHU1ARJ3
build no. M1AJQ.N9600ZHU1ARJ3
Click to expand...
Click to collapse
ok this is a screenshot of my firmware version and other details.
Would you be kind enough to send me your phone firmware details using the phone info app?

abhishek.hitman said:
ok this is a screenshot of my firmware version and other details.
Would you be kind enough to send me your phone firmware details using the phone info app?
Click to expand...
Click to collapse
i have the same version and everything.

samkitshah108 said:
i have the same version and everything.
Click to expand...
Click to collapse
No i think you have the ARJ3 and i have the ARL3. i dont know if that makes a difference.
The thing is i'm unable to find a download for your firmware version N9600ZHU1ARJ3.
Can you please provide me a screenshot of the firmware page in Phone Info app from playstore?

P9 wifi not working after "update"

hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone

Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder

zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the phone doesn't show any update to nougat, im stock at C605B135, but i do remember that it showed an update a while ago, but not now, weird thing.
well, if i try to install with the dload method the phone says "Incompatibility with current version. Please download the correct update package"
I tried the B380 and 397, i will try the 394 that you suggest.
thanks for the help buddy, i will update the post later with the results
PD: can i download this rom from another site or this is the only one? it always fails at 60-70% and it is really slow, 3mb download, i have 30mb

zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
here are the steps that i did:
1-downloaded update.zip (just this file)
1.1 unzip it
2-put it on sd(dload folder)
3-enter download mode and try to install it
do i need to download the other files?
do i need to format my sd again? because it have some other files in it, but with the ota b135 it jus install it fine over and over again

Blackko said:
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
Click to expand...
Click to collapse
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (hence I also don't know how did you flash that D007 at the first place?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi

zgfg said:
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi
Click to expand...
Click to collapse
how can i unlock the BL? the only method that i think will work is send an email to huawei as a request for the code :/ or paying 20$ for chimera software and unlock it(i don't know if it will work anyway)
but for now im going to download all the files again for a second try and yes, im sure that's why my wifi if failing, i downloaded a ota (not full ota) with a different D007 (mine is D002) because there is not any MM rom for c605 just that one from firmware finder rewrite (desktop version)

Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
Please check older threads under the same P9 Q/A subforum (and/or in the Guides subforum) where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest his own time to search for the answers
Not specific for P9 but same for the other Huawei/Mate models (excluding the newest models released alreadyvwith Pie)
Hint: DC Unlocker or Ministry of solutions, price is not 20 but 4 or 5 Euros

zgfg said:
Please check older threads under the same P9 Q/A subforum where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest some of his own time to search for the answers
And/or in the Guides subforum.
Not only for P9 but same for the other Huawei/Mate models (excluding the newest models eleased alreadyvwith Pie
Hint: DC Unlocker or Ministry of solutions, price is not 20 vut 4 or 5 Euros
Click to expand...
Click to collapse
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?

Blackko said:
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?
Click to expand...
Click to collapse
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services

zgfg said:
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services
Click to expand...
Click to collapse
thx for the help, this is all the info i need, you know alot of this

Blackko said:
thx for the help, this is all the info i need, you know alot of this
Click to expand...
Click to collapse
Were you able to update/DLOAD now?

zgfg said:
Were you able to update/DLOAD now?
Click to expand...
Click to collapse
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone

Blackko said:
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone
Click to expand...
Click to collapse
Of course that flashing another cust without rebranding first, bricks the phone.
I just wonder how you know now that, why you didn't take time to read or ask about in advance (and I think, in previous answers I was also writing you about)
Sorry, I'm busy and cannot help you further.
There are guides on XDA, but maybe better pay for DC-Phoenix or Ministry of solutions to unbrick the phone and to install you Nougat like c432 b504

download http://download-c1.huawei.com/downlo...52&siteCode=np
Create a file dload in SD card and move file Update.app in dload .
Use method 3 Buttons To install.