Database Develop

Convert UL00 to L09 and Update to B303

Did someone try to change the firmware on any UL00 device to L09 and uptade to B303?
I changed my Location from UL00-C00B120 to UL00-C433B114 without any Problems.
If i try to change to L09-C432B114 the same way (change build.id etc.) an error appears "incompatible with current version"
Changed Build.id to L09-C432B114/B000 and then tried to update to B114/B145 without success.

Tuerkay said:
Did someone try to change the firmware on any UL00 device to L09 and uptade to B303?
I changed my Location from UL00-C00B120 to UL00-C433B114 without any Problems.
If i try to change to L09-C432B114 the same way (change build.id etc.) an error appears "incompatible with current version"
Changed Build.id to L09-C432B114/B000 and then tried to update to B114/B145 without success.
Click to expand...
Click to collapse
I think you would need to change the details in the file OEMINFO.
If you look in the forums I made a post about converting from L09 to UL00
I recently converted back from UL00 to L09

brumgav said:
I think you would need to change the details in the file OEMINFO.
If you look in the forums I made a post about converting from L09 to UL00
I recently converted back from UL00 to L09
Click to expand...
Click to collapse
change oeminfo back to dualcu/cn or leave as hw/meafnaf?

Tuerkay said:
change oeminfo back to dualcu/cn or leave as hw/meafnaf?
Click to expand...
Click to collapse
From memory I think OEMINFO needs to be hw/eu for L09
But I would need to check when I get home in about 2 hours time
You'll then need to install the CRR-L09C432B114 firmware, which will them collect OTA update to B145...then you can install the B303 MM Beta from the other forum post

brumgav said:
From memory I think OEMINFO needs to be hw/eu for L09
But I would need to check when I get home in about 2 hours time
You'll then need to install the CRR-L09C432B114 firmware, which will them collect OTA update to B145...then you can install the B303 MM Beta from the other forum post
Click to expand...
Click to collapse
OK. red your post again and searched the web for more information.
- changed OEMINFO to hw/eu
- changed ro.build.display.id=CRR-L09C432B000
- loaded the full Update.app for CRR-L09C432B114
- fully unrooted device
- flashed stock recovery
- device made some app updates and now there is a message in the notificationbar "Defect report reminders (Beta version) Prohibit any running behaviour!")
- still tried to do an local update.
- Software install failed! Incompatibility with current version

Tuerkay said:
OK. red your post again and searched the web for more information.
- changed OEMINFO to hw/eu
- changed ro.build.display.id=CRR-L09C432B000
- loaded the full Update.app for CRR-L09C432B114
- fully unrooted device
- flashed stock recovery
- device made some app updates and now there is a message in the notificationbar "Defect report reminders (Beta version) Prohibit any running behaviour!")
- still tried to do an local update.
- Software install failed! Incompatibility with current version
Click to expand...
Click to collapse
Have you done a factory reset during any of the above?

brumgav said:
Have you done a factory reset during any of the above?
Click to expand...
Click to collapse
nope not before.
tried to do a factory reset after the update failed but the facotry reset also failed.

Tuerkay said:
nope not before.
tried to do a factory reset after the update failed but the facotry reset also failed.
Click to expand...
Click to collapse
I had to do a factory reset before I could get the update to install?
You may still be on the UL00 version....check your settings to see if you have things like the permissions manager and the mobile data package details (you know the place where you can change your monthly data allowance and cycle date) because if you still have thm then your still on the UL00 firmware.
I had this happen even though my build was showing as L09.
I took the update.app from the CRR-L09C432B144 zip and placed it in the dload/ folder on the root of the device, and then when it tried to update it said not compatiable, and then asked me if I wanted to download the full package, which it did....but a factory reset was needed in the end for me.
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
Also, something else which I think I had to do was to switch off and then hold both power + and - then press the power on...This took me to a firmware update screen (before booting) where it used my wifi to download the latestest firmware....maybe you could try this....im not certain on the volume button combo...it was either just the - and power on, or just the + and power on or like i said both the + and - and power on

brumgav said:
I had to do a factory reset before I could get the update to install?
You may still be on the UL00 version....check your settings to see if you have things like the permissions manager and the mobile data package details (you know the place where you can change your monthly data allowance and cycle date) because if you still have thm then your still on the UL00 firmware.
I had this happen even though my build was showing as L09.
I took the update.app from the CRR-L09C432B144 zip and placed it in the dload/ folder on the root of the device, and then when it tried to update it said not compatiable, and then asked me if I wanted to download the full package, which it did....but a factory reset was needed in the end for me.
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
Also, something else which I think I had to do was to switch off and then hold both power + and - then press the power on...This took me to a firmware update screen (before booting) where it used my wifi to download the latestest firmware....maybe you could try this....im not certain on the volume button combo...it was either just the - and power on, or just the + and power on or like i said both the + and - and power on
Click to expand...
Click to collapse
like i already said. after changeing the oeminfo and edititing the build.prop, the factory reset always fails at 3%. i also can´t use any update.app file. tried using the update.app from the b145.zip but didn´t work either. i also don´t get an message to download the correct update.
what exactly did you write into the build.prop?
i currently have no permission manager and no mobile data manager

Tuerkay said:
like i already said. after changeing the oeminfo and edititing the build.prop, the factory reset always fails at 3%. i also can´t use any update.app file. tried using the update.app from the b145.zip but didn´t work either. i also don´t get an message to download the correct update.
what exactly did you write into the build.prop?
Click to expand...
Click to collapse
I think I wrote CRR-L09C432B114

@Tuerkay Had the same problem. Let me know if you find a fix for it... I'm searching too.

bgx said:
@Tuerkay Had the same problem. Let me know if you find a fix for it... I'm searching too.
Click to expand...
Click to collapse
tried many different things but nothing worked. Now i´m back at C433B114 until someone finds a solution.
I´m missing so many functions but i won´t change back to C00B160 because my main language isn´t supported well enough

Hi,
I am on UL00C00B160. I want to hawe european version. Is it possible to make UL00C432? If I convert to L09 will the phone still be dualsim?

Iverom said:
Hi,
I am on UL00C00B160. I want to hawe european version. Is it possible to make UL00C432? If I convert to L09 will the phone still be dualsim?
Click to expand...
Click to collapse
European version only supports 1 SIM

Loosing the DUAL SIM capability, which is the real benefit of turning a UL00 to a L09?

plantunes said:
Loosing the DUAL SIM capability, which is the real benefit of turning a UL00 to a L09?
Click to expand...
Click to collapse
The languagesupport kinda sucks for german users, if you use the chinese UL00. To have better support, i changed my location from UL00-C00B160 to UL00-C433B112. This way i have got a better language implementation but lost some features which i´m missing now. I´m not using the dual-sim function which is why there are no cons for me.
But since i have the chinese hardware, maybe it would be possible to activate the dual-sim function.
There are two lines in the Buld.prop
persist.sys.dualcards=false
ro.dual.sim.phone=false
changeing these and some other options could help maybe.

Tuerkay said:
The languagesupport kinda sucks for german users, if you use the chinese UL00. To have better support, i changed my location from UL00-C00B160 to UL00-C433B112. This way i have got a better language implementation but lost some features which i´m missing now. I´m not using the dual-sim function which is why there are no cons for me.
But since i have the chinese hardware, maybe it would be possible to activate the dual-sim function.
There are two lines in the Buld.prop
persist.sys.dualcards=false
ro.dual.sim.phone=false
changeing these and some other options could help maybe.
Click to expand...
Click to collapse
Do you have a CL00 converted into a L09?
If you do, you could change that string "ro..dual.sim.phone" into TRUE and see what happens. It would be absolutely great if that was possible!

I had the same problem than you, so i flashed Boot.img, Cust.img, Recovery.img, system.img and userdata.img (just in case), and it worked. the phone doesn't found the OTA to B145, but i'll try to update manually.

Lightofdarkness666 said:
I had the same problem than you, so i flashed Boot.img, Cust.img, Recovery.img, system.img and userdata.img (just in case), and it worked. the phone doesn't found the OTA to B145, but i'll try to update manually.
Click to expand...
Click to collapse
Flashed all files and then tried a clean update. Didn´t work. My Mate S shows the right Build and Vendor but i´m still not able to use the C432 Update.app´s.
Are you able to update manually?
Is your phone originally an L09 or UL00 device? If it´s an UL00 Mate S, could you tell me exactly what you did?

My phone is originally an L09, but i broke it in UL00C00, can't get back to L09, recovery don't boot, flash via fastboot lead to freeze at boot

P9 Lite (VNS-l21 single SIM) CUSTC change

Yesterday I figured to debrand my VNS-l21. Everything is fine, updated manualy to latest ROM B130. But, CUSTC has changed from C02 (Vodafone EU) to C900 (Global). In P7 thread there someone posted small update.app file (around 18 kb, http://forum.xda-developers.com/ascend-p7/help/p7-l10-defect-report-reminders-t2952124) that after flashing will change the CUSTC back to C432 (EU open market).
Have someone idea where to get this file for VNS-l21?

Ghouless said:
Yesterday I figured to debrand my VNS-l21. Everything is fine, updated manualy to latest ROM B130. But, CUSTC has changed from C02 (Vodafone EU) to C900 (Global). In P7 thread there someone posted small update.app file (around 18 kb) that after flashing will change the CUSTC back to C432 (EU open market).
Have someone idea where to get this file for VNS-l21?
Click to expand...
Click to collapse
Heyho,
u can do this also on the VNS-L21.
Hope i could help u
Regards,
Sebastian

k1ll3r8e said:
Heyho,
u can do this also on the VNS-L21.
Hope i could help u
Regards,
Sebastian
Click to expand...
Click to collapse
Nice work with the toolkit Years before I had unlocked & rooted every of my smartphones but, last two years I need to work with some apps that recognizing rooted device and won't work (bank app etc.). So if there no chance to change the region back to C432 without rooting the device, I will stay on that Global CUSTC (after two days of deep testing, there's no problem with it). Maybe later someone will do that update.app file or will be included in future update ROM.
Thread that I'm talking about http://forum.xda-developers.com/ascend-p7/help/p7-l10-defect-report-reminders-t2952124

Ghouless said:
Nice work with the toolkit Years before I had unlocked & rooted every of my smartphones but, last two years I need to work with some apps that recognizing rooted device and won't work (bank app etc.). So if there no chance to change the region back to C432 without rooting the device, I will stay on that Global CUSTC (after two days of deep testing, there's no problem with it). Maybe later someone will do that update.app file or will be included in future update ROM.
Thread that I'm talking about http://forum.xda-developers.com/ascend-p7/help/p7-l10-defect-report-reminders-t2952124
Click to expand...
Click to collapse
Heyho,
THX for ur warm words and the hint
-
About the build id, the only problem which happened to me while i was on the Asia build is, that u don't get any updates...
About the update.app, i just downloaded the file u linked me, i'll have today a look at it. Maybe we can produce such an file also for our L21/L31.
Regards,
Sebastian

k1ll3r8e said:
Heyho,
THX for ur warm words and the hint
-
About the build id, the only problem which happened to me while i was on the Asia build is, that u don't get any updates...
About the update.app, i just downloaded the file u linked me, i'll have today a look at it. Maybe we can produce such an file also for our L21/L31.
Regards,
Sebastian
Click to expand...
Click to collapse
First, if you can build that update.app for l21/l31, it would be amazing, because that will be BIG help for everyone who want only to debrand our P9 Lite's without lose warranty or brick it.
Second, nice to have there someone, who taking care of this phone :good:

Hello dear developers...Recently I bought a used Huawei p9 lite vns-l21c150b106 single sim...It is cosmote branded and I want to debrand it cause I found out by searching that there are several updates such as b150...When I try to update my phone it says that has the latest updates...I wanted to ask if there is a way to debrand it and return to official Europe stock rom without void my warranty...I found a way in the internet through local update via sd card but I don't find the stock rom Europe(I live in Greece)for my single sim vns-l21...I found only vns-l21c432b160 which is for dual sim...I think that vns-l21c150b160 must be for my single device,i suppose that the difference is c150 and c432...any solution please???

Dual Sim Management

Hi I have the Dual Sim Version of the p9. Everything is working well with both Sims except I can not disable the second Sim. But this is essential for me since I want to disable my work Sim when I leave the office. Huawei Website says one has to use the Dual sim Manager...which my phone has not Installed. Tried it with an app from the play Store but found out p9 is not yet supported by the App.
Any ideas?
Thanks in advance

It should be in the settings menu standard.
Sent from my EVA-L19 using XDA-Developers mobile app

Hi, I read that too. The thing is I don't have the Dual Sim section in the settings.
Edit:
I´m confused: I just read that dual sim version is L19 only. But I have L09 (bought on amazon)... but both sims working fine... only the managing setting is missing.
I get two IMEI numbers when using *#06#
What is going on here?

What do you have L19 or L29?

as edited in the post before : Confusingly I have L09 but both sim cards are working like a charm, only the setting does not show up

very interesting can you try nfc? L19 dont have nfc and dual sim L09 have nfc and single sim.
May be someones flash L09 rom your L19 phone.

master' said:
very interesting can you try nfc? L19 dont have nfc and dual sim L09 have nfc and single sim.
May be someones flash L09 rom your L19 phone.
Click to expand...
Click to collapse
I can confirm: NFC not working.
That phone was bought via amazon but the merchant was in hong kong. So maybe they took the chinese L19 and flashed the european L09 version.
In this case I won´t be able to activate the dual sim management setting I guess.
Damn! This is bad.

No not bad, you can flash L19C432Bxxx full version with dload method very easy. Look the warehouse topic
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v52786/f1/full/update.zip extract UPDATE.APP to sd card dload folder shutdown phone and vol+ vol - power buttons, all 3 press same time. Wait and you will see upgade your phone.

sure I can do that, but since this is half a work phone now I didnt wanted to root or flash anything since there are company certificates installed. I guess if I flash there are no OTA updates possible?

This method is official, no need unlock bootloader or root. There is dont reason will ota update but i dont sure.

master' said:
This method is official, no need unlock bootloader or root. There is dont reason will ota update but i dont sure.
Click to expand...
Click to collapse
thanks man, I will give it a try!

Did it help?

We know that the L19 doesn't have inter-band carrier aggregation for lte-a/4g+, what happens if you turn an L19 into a L09, do you guys think it could work?

hanniSK said:
Did it help?
Click to expand...
Click to collapse
I was on a business trip until yet, didnt have time to try it.
noki57oo said:
We know that the L19 doesn't have inter-band carrier aggregation for lte-a/4g+, what happens if you turn an L19 into a L09, do you guys think it could work?
Click to expand...
Click to collapse
does this mean LTE won´t work for me on L19?

oldswe said:
does this mean LTE won´t work for me on L19?
Click to expand...
Click to collapse
No, LTE will work, but if you happen to be using 4G+ (or LTE+, or LTE-A, or whatever you want to call it) in Europe, this means that i am right, and you can trade sim managment for better 4G. Because the EVA-L19 has limited 4G+ capabilities (note: not 4G capabilities).

master' said:
No not bad, you can flash L19C432Bxxx full version with dload method very easy. Look the warehouse topic
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v52786/f1/full/update.zip extract UPDATE.APP to sd card dload folder shutdown phone and vol+ vol - power buttons, all 3 press same time. Wait and you will see upgade your phone.
Click to expand...
Click to collapse
That didn´t work. I extracted update.app to dload folder. pushed the 3 buttons on startup. It said its updating emui and afterwards optimizing the system. But the phone is still L09.
Any hints?
Thanks in advance!

How to install Dual SIM CardManager.
Your phone must be rooted. Use filemanager with root access, for example Root Browser, ES File Explorer, Solid Explorer.
Go to directory root - system - hw_oem - EVA-L09 - xml.
Open file unstall_apk.xml using text editor, delete text /system/app/HWCardManager.apk; and save.
Open file APKInstallList.txt and insert text /system/app/HWCardManager/HWCardManager.apk and save.
Permissions must be -rw-r--r--.
Reboot phone and Dual SIM CardManager will be installed.
If you want to change the model number and build number:
Go to directory root - cust - special_cust - EVA-L09 - hw - eu
Open file local.prop using text editor, change in ro.build.display.id, ro.build.description and ro.buid.fingerprint EVA-L09 to EVA-L19. Save.
Permissions must be -rw-r--r--.
Reboot phone.
Your phone is now identified as EVA-L19, but the customization is EVA-L09. This is not a problem, it works very well.

Thanks for the Tutorial but rooting is nit an option since this is a business phone.

Used P9 - Missing Stock Apps

Hello everyone!
I just bought an used P9 (EVA-L19) in pristine condition. It arrived with the nougat update but it is missing all Huawei apps. I don't think I really mind not having those (less bloat, hurray!), but I really want at least the camera app! What should I try? This thing is full stock (unrooted), and I'd rather keep it that way... Should I just flash the full stock firmware? HiSuite claims my phone is up to date, but I've got no idea how to check what build my current firmware is.
Thanks!

Oooh... the build seems to be NRD90M "test-keys", which appears to be an old beta build from my googling. Do I have to go back to MM and then upgrade to Nougat? Hopefully I can do all that without a custom recovery...

You have an intermediate firmware.
Search here the B378 for C432 if you want the european version (wich is working fine; some other last updates may have some problems - for example, with B383 me and others have problems with the battery).
Where are you from ??

Shymmy said:
You have an intermediate firmware.
Search here the B378 for C432 if you want the european version (wich is working fine; some other last updates may have some problems - for example, with B383 me and others have problems with the battery).
Where are you from ??
Click to expand...
Click to collapse
I'm from Brazil, but I know for a fact this phone isn't brazilian. It comes with a bunch of stuff written in spanish rather than portuguese, and a warranty certificate citing a bunch of spanish-spekaing latin american countries. I'm browsing through the forums and trying to find out what is my Cust yet. But thanks for the response.
Also, if I have to flash something, is it better to stick with Nougat or is Marshmallow more hassle-free?
(I've attached a screenshot of the status screen from Huawei P9 Tool, this is all the data I could gather so far)

I can't read the screenshot ...
On the "About the phone - Version number" what do you have ??
For example, mine has EVA-L19C432B378, where:
-EVA-L19 is the phone model (P9 dual sim);
-C432 is the european version;
-B378 is the firmware version.
Also, you can read that thread too ... https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400

Shymmy said:
I can't read the screenshot ...
On the "About the phone - Version number" what do you have ??
For example, mine has EVA-L19C432B378, where:
-EVA-L19 is the phone model (P9 dual sim);
-C432 is the european version;
-B378 is the firmware version.
Also, you can read that thread too ... https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400
Click to expand...
Click to collapse
All it says on "Version number" is "NRD90M test-keys". I've read that thread, but to downgrade you need a ROM, and without knowing my Cust ID I'm not sure which ROM I should get.
The screenshot shows my serial number (XVV7N16425001010), the model (EVA-L19 - Dual Sim 32GB Rom 3GB RAM) and a weird build string (eng.jenkin.20161230.130431)

absynte said:
Hello,
do you have dual sim , or single sim and NFC ?
Dual sim: EVA-L19 ou L29
Single sim and NFC EVA-L09 (Européan version)
Click to expand...
Click to collapse
Dual SIM EVA-L19 - No idea if I've got NFC or not. Can't find anything NFC-related on the menus, but it might be that I do not know where to look. Long time Windows Phone user here, just migrated back to Android :laugh:

absynte said:
NFC is an connectivity option.
If you don't have, you have dual sim
Click to expand...
Click to collapse
It does have dual SIM, and is the EVA-L19. So no NFC then. Does it help? I'm currently looking for debranding guides because I can't find what branding this phone originally had.

Oooh well... so far:
1- *#*#2846579#*#* doesn't work (nothing happens), can't enable Manufacturer mode for DC Unlocker
2- The HUAWEI EMUI site doesn't give me a bootloader unlock code, so can't unlock the bootloader with the official method
So, so far, I can't install TWRP, so I can't flash a C432 oeminfo.bin
Also, the Rollback instructions at https://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091 fail, as the rollback intermediate firmware just fails at 5% claiming to be incompatible with my device.
Aside from blindly trying to flash random firmwares with the three button method, do you guys have ANY ideas at all? I need a rest, just wasted the whole day trying to get this damned thing fixed
Sad thing: even with a borked firmware install this is still orders of magnitude better than my old Lumia 930.
EDIT: GODDAMMIT, BLUETOOTH ALSO DOESN'T WORK!

absynte said:
Ok so you've got to google this or to find on xda some answers.
https://forum.xda-developers.com/p9/how-to/how-to-downgrade-nrd90m-to-marshmallow-t3541400
For exemple....2 or 3 clicks....
bye
Click to expand...
Click to collapse
I'll give the instructions of the first post a try, though they did not work for the OP.
EDIT: AAAAAND the 800mb file is downloading at 28kbps... this won't be fun

I'm not sure if it would've been better to edit the last post or add a new one, so if this is agains the rules (I've read them and couldn't find it), please inform me and I'll change things accordingly... buuuut.... IT WORKED.
The OP on the topic absynte pointed out never really posted the outcome of his issue and it looked like he never got it to work, so here is what I did:
Flashed the zip file
I flashed the zip file linked in this post through starting up with vol up + vol down + power. Exactly like the guy over there it did not solve my issue, but did uncover I had exactly the same build as him (EVA-L19C185B361 - Middle East / Asia)
Flashed the intermediate firmware
I download the correct intermediate firmware (C185B300) from here and flashed the same way. The *#*#... menu did not work (as in the menu itself didn't show up)
Flashed a MM build
I downloaded and flashed C185B180 for whatever reason (could've gone with tha latest MM build right away AFAIK). Worked great, all stock apps were there and so was bluetooth
Let the phone update itself through OTA
It updated itself to B210 (or B220, don't remember well) and then B385. Seems to be working fine, but I haven't given the battery a fair chance (constantly flashing and updating stuff) to judge its performance.
Thanks everyone for the help!

alexanrsousa said:
I'm not sure if it would've been better to edit the last post or add a new one, so if this is agains the rules (I've read them and couldn't find it), please inform me and I'll change things accordingly... buuuut.... IT WORKED.
The OP on the topic absynte pointed out never really posted the outcome of his issue and it looked like he never got it to work, so here is what I did:
Flashed the zip file
I flashed the zip file linked in this post through starting up with vol up + vol down + power. Exactly like the guy over there it did not solve my issue, but did uncover I had exactly the same build as him (EVA-L19C185B361 - Middle East / Asia)
Flashed the intermediate firmware
I download the correct intermediate firmware (C185B300) from here and flashed the same way. The *#*#... menu did not work (as in the menu itself didn't show up)
Flashed a MM build
I downloaded and flashed C185B180 for whatever reason (could've gone with tha latest MM build right away AFAIK). Worked great, all stock apps were there and so was bluetooth
Let the phone update itself through OTA
It updated itself to B210 (or B220, don't remember well) and then B385. Seems to be working fine, but I haven't given the battery a fair chance (constantly flashing and updating stuff) to judge its performance.
Thanks everyone for the help!
Click to expand...
Click to collapse
how u downgrade to MM?

spring80 said:
how u downgrade to MM?
Click to expand...
Click to collapse
I did exactly what I said in the last post: flashed C185B300 (from http://www.carbontesla.com/2016/11/downgrade-huawei-p9-nougat-marshmallow-os-middle-east-russia/), then flashed C185B180 (from http://www.carbontesla.com/2016/11/download-huawei-p9-b180-marshmallow-update-l09l19-middle-east/)

alexanrsousa said:
I did exactly what I said in the last post: flashed C185B300 (from http://www.carbontesla.com/2016/11/downgrade-huawei-p9-nougat-marshmallow-os-middle-east-russia/), then flashed C185B180 (from http://www.carbontesla.com/2016/11/download-huawei-p9-b180-marshmallow-update-l09l19-middle-east/)
Click to expand...
Click to collapse
thanks for your answer my friend , i will try and update u
---------- Post added at 01:56 PM ---------- Previous post was at 01:25 PM ----------
working my friend , but be sure to backup first because u will lost everything

Huawei P40 Pro eRecovery offer EMUI 11

My previous build was ELS-N29 10.1.0.176(C432E8R6P1) and no EMUI 11 for me through regular channels (Settings/System & updates and Support App), so i decided test update through eRecovery and voilá, now I have EMUI 11 build 11.0.0.151(C432E3R6P4)
I followed these steps:
1. Boot into Recovery, USB cable connected to the device and to the PC/Charger, with device switched off press VOL+ and Power ON, maintain both pressed till you see the Recovery, then select "Update mode".
2. Select "eRecovery mode".
3. Select "Update and recover system"
4. Select "Download update and recover"
5. "Enabling Wi-Fi..."
6. "Connecting to Wi-Fi network..." select yours, add password and select "Connect"
7. If the "Downloading Package..." is EMUI 11, wait till the all process ends, in case is not, then you can cancel and restart the device.
Enjoy!!
Notes:
- Takes a little bit longer "verifying package..."
- During update you'll see "Recovering system", Do not remove the battery or storage device. !!!
- Data partition won't be wiped.
- If your are not happy with EMUI 11, because you still with Android 10, not 11 as I have expected, HiSuite_11.0.0.500_OVE offer a rollback to EMUI 10.1.0, in my case for ELS-N29 10.1.0.176(C432E8R6P1), BUT this time the data partition will be wiped.
* ATTENTION: YOU are choosing to install this firmware at your own risk.
* I do not take responsibility for any problems with your device.

Not working for me. UK on version. 182, dosnt retrieve any package info.

cmoss9946 said:
Not working for me. UK on version. 182, dosnt retrieve any package info.
Click to expand...
Click to collapse
Try without SIM card

Thank you it worked for me

kilroystyx said:
Try without SIM card
Click to expand...
Click to collapse
Thanks, But have tried that, connected to WiFi, but fails on package retrievel.

cmoss9946 said:
Thanks, But have tried that, connected to WiFi, but fails on package retrievel.
Click to expand...
Click to collapse
- USB cable connected
- Battery above 30%
Can you post a pic with error message?

worked for me as well, im from romania.

90% Battery, and on charge, WiFi connect.

cmoss9946 said:
90% Battery, and on charge, WiFi connect. View attachment 5171893
Click to expand...
Click to collapse
Any chance that your internet provider is barring to the device contact Huawei servers?
Can you check with different one?

kilroystyx said:
Any chance that your internet provider is barring to the device contact Huawei servers?
Can you check with different one?
Click to expand...
Click to collapse
Not had a problem upto now. Its no big deal, will wait until its available on Firmware Finder for ELS-LGRP4-OVS.

Working great for me

cmoss9946 said:
90% Battery, and on charge, WiFi connect. View attachment 5171893
Click to expand...
Click to collapse
same error as you, we have the one sim version it seems

@cmoss9946, @mynameisalvaro
Your firmware is customized for one service provider?
Your devices have only one SIM active because they are locked by firmware?
So, they decided disable this feature to maintained the contract, if not this FW would set you free, i think!!!

kilroystyx said:
@cmoss9946, @mynameisalvaro
Your firmware is customized for one service provider?
Your devices have only one SIM active because they are locked by firmware?
So, they decided disable this feature to maintained the contract, if not this FW would set you free, i think!!!
Click to expand...
Click to collapse
Nope, I got the firmware from firmware finder, only one SIM because of the tray, this is a different model than the international one that has dual SIM. Its just there is no emui 11 yet for our specific model I belive.

mynameisalvaro said:
same error as you, we have the one sim version it seems
Click to expand...
Click to collapse
working great without sim

cmoss9946 said:
90% Battery, and on charge, WiFi connect. View attachment 5171893
Click to expand...
Click to collapse
This is what happens once you downgraded your firmware using hisuite proxy. Software updates are now broken.

Riyal said:
This is what happens once you downgraded your firmware using hisuite proxy. Software updates are now broken.
Click to expand...
Click to collapse
Not really , it's probably because we have different phone versions than the european, my version is the one for America so no Emui 11 yet

Right.
EMUI 11 does not come for all areas at the same time. And not for all models.
In time, it will come for everyone ... probably (for the announced models)

The steps worked for me. I have the international version which is dual sim (ELS-NX9).

Riyal said:
This is what happens once you downgraded your firmware using hisuite proxy. Software updates are now broken.
Click to expand...
Click to collapse
Not really, only if you choose firmware for a different region.