I tried to Flash Custom Rom to my Huawei Mate S. Now phone does not on. So i want to go back to Stock Rom.. Can any one please give me Stock Rom.. and.. can i use Sp Flash tool?
I think That You had better use Sp tool because it is simple and Huawei Mate S Stock Rom is MTK Device
1. you shouldnt charge your device up to 50%
2. enable USB debugging and developer.
3, remove battery and connect your phone to PC
4.Download tool Sp and Stock Rom
5, Open SP tool. Locate the file catter.
6. Click the Download icon Then it will start Flashing
Download required files
Related
hi friends
i rooted and unlocked my xperia sp bootloader to install a custom rom(cyanogenmod).Now i need to get back my stock rom
Thing that I done to get stock firmware:
1. I download a stock firmware (ftf file) and flash it via flashtool.But failed several times and no suitable solution in any forums, So please help me guys.
More Informations(Actual condition of my phone when flashing)
1. My phone has unlocked bootloader at that time
2. My phone has Root Permission while flashing
Problem:
the problem showned is "system.sin error " when flashing.
pls help me friends.........
Use Flashtool v0.9.18.6.
The newer versions don't support Xperia SP.
1-Download this file (cant post it but in youtube type "Update your Xperia SP to Android 4.3 - Using Flashtool" and the frimware is not 12.1.a.1.207) and paste it in the C:\flashtool\frimware
2-Make sure your device is powered off
3-Open flashtool and press the lighting button and select flashmode
4-Select the frimware that you have downloaded
5-A window will pop-up until sometime
6-When the window pops-up,while holding the volume down button connect your device to your PC
7-And wait until the process to finish
8-There you go
Note: You can flash other stock frimwares too.
Note 2: This won't lock your bootloader! It will only flash the stock rom and unroot the device.
Did it helped? Hit the thanks button!
While Installing TWRP I formatted a Flash with Auto Flash Format option
and now device is not starting !
urvish015 said:
While Installing TWRP I formatted a Flash with Auto Flash Format option
and now device is not starting !
Click to expand...
Click to collapse
Now u have to Flash the stock rom again via sp flash tool
But how it can be possible ?( in bricked/totally dead phone )
User Sid said:
Now u have to Flash the stock rom again via sp flash tool
Click to expand...
Click to collapse
But how it can be possible ?( in bricked/totally dead phone )
urvish015 said:
But how it can be possible ?( in bricked/totally dead phone )
Click to expand...
Click to collapse
It is possible, If Ur phone goes dead or got soft bricked after flashing ROM/Recovery then u can able to Recover or fix it by using SP Flash tool
In hard bricked it is not possible......nd u mention that u r flashing TWRP then ur phone got dead it means it is a soft brick....
Method to Flash Stock Rom with SP Flash Tool...
1- Download Stock Rom==
Link== https://drive.google.com/file/d/0B5os0Tgr4idrN3pfRmgxNE9FWFE/view
2 Install Lenovo Drivers in ur pc and also keep in mind that u have VCOM Drivers installed on ur pc
Extract the zip file and flash the stock rom with sp flash tool
U can watch this video if u r not familiar with Sp Flash Tool...
https://www.youtube.com/watch?v=UxW17gEBY_M
If u feel any prblm jst ask...happy to help u
Scatter File is INVALID !
First of ALL
Thank U very much ! :laugh:
it is showing Scatter file is INVALID !
CHECK these screenshots !
Scatter File Error >> https: //ibb.co/ cj7JUQ (remove all spaces)
Scatter File Location >> https: //ibb.co/ eMq59Q (remove all spaces)
and .... phone getting loop of connected to pc and disconnected.( as i can hear sounds from PC)
urvish015 said:
First of ALL
Thank U very much ! :laugh:
it is showing Scatter file is INVALID !
CHECK these screenshots !
Scatter File Error >> https: //ibb.co/ cj7JUQ (remove all spaces)
Scatter File Location >> https: //ibb.co/ eMq59Q (remove all spaces)
and .... phone getting loop of connected to pc and disconnected.( as i can hear sounds from PC)
Click to expand...
Click to collapse
I think u r selecting Wrong Scatter File coz Yesterday my phone stuck in bootloop and i downloaded the same stock file which i have provided u.....and i successfully able to fix it..Here i m giving u the full details from where u select the scatter file
1- Download the stock rom ( I already provided the link above ) File size-1.3GB
2- Extract the file u got Stock file & Sp Flash Tool
3- Open SP flash Tool, It will ask u to find scatter file (Go to folder where u have extracted the folder> Find Target Bin Folder U will Find the Scatter file there)
4- If it also not detecting the download agent then u can find it in ( Extracted folder Aio upgrade > select Allinone
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note- If u don't have VCOM Drivers in ur pc, then ur pc can't able to detect ur phone and then u can't able to flash the stock rom so Install it
I recovered my phone ! but again ....
User Sid said:
I think u r selecting Wrong Scatter File coz Yesterday my phone stuck in bootloop and i downloaded the same stock file which i have provided u.....and i successfully able to fix it..Here i m giving u the full details from where u select the scatter file
1- Download the stock rom ( I already provided the link above ) File size-1.3GB
2- Extract the file u got Stock file & Sp Flash Tool
3- Open SP flash Tool, It will ask u to find scatter file (Go to folder where u have extracted the folder> Find Target Bin Folder U will Find the Scatter file there)
4- If it also not detecting the download agent then u can find it in ( Extracted folder Aio upgrade > select Allinone
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note- If u don't have VCOM Drivers in ur pc, then ur pc can't able to detect ur phone and then u can't able to flash the stock rom so Install it
Click to expand...
Click to collapse
I have recovered my phone via my friend. but he installed "Lolipop". so i wanted to update it to marshmallow.
for that ... i have downloaded your file (1.3GB) , put it in my sd card.
for installing it in recovery mode, i have also installed new recovery mode(TWRP), but after that, i can not start my device.
ONLY Recovery mode works. whenever i start my device, logo of lenovo comes, and than disappears. ( maybe phone get started after this,becauase when i connect phone to pc in that condition, my laptop detects the device and play that sound.)
urvish015 said:
I have recovered my phone via my friend. but he installed "Lolipop". so i wanted to update it to marshmallow.
for that ... i have downloaded your file (1.3GB) , put it in my sd card.
for installing it in recovery mode, i have also installed new recovery mode(TWRP), but after that, i can not start my device.
ONLY Recovery mode works. whenever i start my device, logo of lenovo comes, and than disappears. ( maybe phone get started after this,becauase when i connect phone to pc in that condition, my laptop detects the device and play that sound.)
Click to expand...
Click to collapse
Once u Flash TWRP u can't Update stock rom Now u again bricked ur phone.............
and also the Stock file i have provided is of 5.0 nt 6.0
Sir i am new to this site and i am noob to this process kindly answer a few things.
i am using honor 3c international version and i rooted this device with kingroot do i need to unlock bootloader now ?
i tried to flash recovery there are two files in twrp recovery
folder name: H30-U10_TWRP_2.8.6.0
1. recovery TWRP_2.8.6.0_byCL file
2. MT6582_Android_scatter
when i click download button on sp flash tool and connect my device without battery my phone connect and disconnect after 2 or 3 seconds AND i also tried with battery inserted but same results
Please help me if i am doing anything wrong I want to install CynogenMod on my honor 3c
i downloaded these files. and install all the drivers.
Device Build Number: H30-U10-V100R001C900B129
SP Flash Tool version: v3 1324.0.sn177
Twrp version : H30-U10_TWRP_2.8.6.0 1.
Room i downloaded: H30-U10_CM-12,1_5.1_beta-1
Gapps i downloaded: Slim_normal_gapps.BETA.4.4.build.9-20150404_2
zainanjum said:
Sir i am new to this site and i am noob to this process kindly answer a few things.
i am using honor 3c international version and i rooted this device with kingroot do i need to unlock bootloader now ?
i tried to flash recovery there are two files in twrp recovery
folder name: H30-U10_TWRP_2.8.6.0
2. MT6582_Android_scatter
when i click download button on sp flash tool and connect my device without battery my phone connect and disconnect after 2 or 3 seconds AND i also tried with battery inserted but same results
Please help me if i am doing anything wrong I want to install CynogenMod on my honor 3c
i downloaded these files. and install all the drivers.
SP Flash Tool version: v3 1324.0.sn177
Room i downloaded: H30-U10_CM-12,1_5.1_beta-1
Gapps i downloaded: Slim_normal_gapps.BETA.4.4.build.9-20150404_2
Click to expand...
Click to collapse
Make sure drivers are installed properly.
After doing the sptool thing connect your phone.
Its normal it vibrates for few seconds let it be.it will automatically establish connection.
To flash recovery you need to unlock bootloader
Search code lovers thread every thing is explained there .
hassanjavaid8181 said:
Make sure drivers are installed properly.
After doing the sptool thing connect your phone.
Its normal it vibrates for few seconds let it be.it will automatically establish connection.
To flash recovery you need to unlock bootloader
Search code lovers thread every thing is explained there .
Click to expand...
Click to collapse
Sir i already rooted my honor 3c and if i need to unlock bootloader first kindly provide me a link i am new to this website and i will be very thank full to you.
zainanjum said:
Sir i already rooted my honor 3c and if i need to unlock bootloader first kindly provide me a link i am new to this website and i will be very thank full to you.
Click to expand...
Click to collapse
I am on my cell I can't provide you link.you will find code lovers thread in guides section..search
https://forum.xda-developers.com/honor-3c/how-to/guide-huawei-honor-3c-h30-u10-t2837773
Here is a link of code lover's thread
Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:
Check Antiroolback
Turn your phone to fasboot mode
Connect your Redmi Note 5 to PC with USB
Step Two
in PC go to C:\adb\
Push*shift*+ Right Click
select Open Command window here
In*CMD*write this
Quote:* ** ***fastboot devices
then write
Quote: fastboot getvar anti
Sent from my MI 6X using Tapatalk
balther said:
Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:
Click to expand...
Click to collapse
¿You tried to flash in edl mode the original rom?
martinpiriz said:
¿You tried to flash in edl mode the original rom?
Click to expand...
Click to collapse
Yes, but Mi Flash and Fastboot flash no work
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
have you tried simply miflash? is the easyest way
Yonecloud said:
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
Click to expand...
Click to collapse
Maybe you can try older version of SPflash.
I've been trying to flash stock ROM using .zip fastboot files from
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
They all seem to come in a payload format, which is not recognised by Xiaomi Flash Tool. What am I doing wrong?
Ok, I've figured it out. Here you can find the latest global ROM and Xiaomi Flash Tool
https://c.mi.com/in/miuidownload/detail?guide=2
Fasboot drivers can be downloaded from here
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
This seems to be the cleanest way of doing it
Yonecloud said:
Hello everyone, i'm trying to recovery my poco m3 pro 5g, after a failed flash a china rom,
i have a unlocked bootloader, and when i try flash thogh MIFlash tool, i get a sucess message,
but when i try to boot the system, when start show the miui logo, it crash, then return to recovery mode,
i'm tying to flash camellia_in_global_images_V12.5.3.0.RKSINXM_20220210.0000.00_11.0_in_7f8fba4c4c
i already tried use SP Flash tool, but i cannot select the scatter, i get a message saing that this scatter isn't compatible with this vesion, please update, but the SP is the latest version that i've found
any help is appreciated, (sorry for the bad english)
Click to expand...
Click to collapse
you may have a corrupted dowlnoad ... download it again and extract it with another tool some times it will help
and if you wanna use sp flashtool dont use the latest version of sp flash tools use https://spflashtools.com/windows/sp-flash-tool-v5-2208
and dont wory you will be ok it had this problem so many times