My GF was making a call with my Note5 and it popped up Process System isn't responding - OK, Wait - neither of which did anything. also it was vibrating every second or so, probably while trying to bring the system process back up and it crashing again.
Holding power didn't seem to turn it off but eventually it restarted to SAMSUNG screen, where it CONTINUES to vibrate every second and never progress.
Holding power does not shut it down.
What the heck do I do now!?
This is a relatively new phone but I bought it from some guy who I can't get back in contact with. It had been working fine for a week, rooted, running Dr Ketan rom.
edit: OK, after about 5 minutes of it vibrating at the SAMSUNG screen I tried holding power AND vol down, this (perhaps coincidentally) then rebooted it and it seemed to come up fine this time. It's a real pain not having a removable battery when something like this happens.
Related
Hi all,
Just this morning, my back button on my I9000m seems to be acting funny (Phone is only about 3 days old). When I hit it it seems to get "stuck" for a pretty good time, (i can reproduce it by hitting it twice, will get stuck most of the time on the second hit; or even when trying to back out of multiple things.. will hang).
It'll eventually "unstuck" itself after like 10-15 seconds or so..
I can force unstuck by locking and then unlocking the screen via the power button..
Have tried restarting the phone, battery pulling it... only thing left to try is to flash the bugger..
I don't think it's hardware, because it is functional, I get haptic feedback and what not.. it almost feels like its waiting to do something....
Running Stock JH2 w/ OCLF...
Help?
Build date 1007 - in service August 2010.
I've been running Pinnacle 1.2 (been on it since v1.0).
Just moments ago I've found the power button to be unresponsive. This happened after I rebooted into recovery, sticking me there for a while.
I was stuck in a recovery loop- pull batt, reinstall batt, automatic boot back into recovery.
Somewhere in the process of trying different combinations of battery pulls with cable installs and volume up/down holds (trying for download mode) I ended up finally launching the ROM, but w/o a power button all I can do is pull the battery, and the moment I do, the phone automatically wakes w/o even touching the power button (which is totally new to me).
Any input would certainly be appreciated.
My first order of business is to flash to stock (JF6, bootloaders and all if all else failed) but being that it automatically boots when the battery is installed I don't think even a jig would help...or is the beer steering me wrong?
I am confused. You can go back to stock or no?
I cannot get into download mode. The only way to power the phone off is via battery pull.
I cant flash anything from recovery because it says the power button is disabled (it is).
As I put the battery back in the phone boots immediately...I mean the at&t screen lights up my palm before I put the cover on or even flip the phone over.
Use an app from market to enter download mode? system toolbox free is one
Used Odin to go back to stock KF1 and still no power button. Now System Toolbox won't work w/o root/busybox. lol
Once my phone falls asleep I can't wake it back up.
It may seem obvious that the power button is physically broken but I don't know why the phone boots up as soon as the battery is installed...that was never the case before this issue came up.
watsa? Anyone?
Can anyone else shed some light on what would make the phone boot when the battery is inserted (happened at the same time the power button became unresponsive), essentially denying me the opportunity to get to download mode.
beyond this point I am consfused myself. I initially blamed Pinnacle and thought going back to stock might fix it which obviosly didn't happen.. It seems like your power button is always "pushed" so as soon as you pop your battery in phone reboots..
watsa said:
beyond this point I am consfused myself. I initially blamed Pinnacle and thought going back to stock might fix it which obviosly didn't happen.. It seems like your power button is always "pushed" so as soon as you pop your battery in phone reboots..
Click to expand...
Click to collapse
On a second thought if it was the case then power button should have messed up functioning of your phone even after powering on. So I am consfused more. Need a hardware expert here
I'm preparing myself to deal with my beloved phone finally letting me down after all the success we've had...it's just really bad timing as I'm currently unemployed, broke and only 13ish months into a 48 month contract.
Ok, so after a physical tear down it seems to be in the external plastic of the button itself?
After removing the outer case and reinserting the battery I noticed it did not automatically boot up. I pressed the actual power switch/button that is connected to the board and the phone then powered up. I let it finish booting and held the power button down and the power options menu popped up. I clicked Power Off and it shut down fine.
This means it certainly isn't Pinnacle ROM (never thought it was, personally), or software related at all. Now to figure out what is going on between the plastic external power button and the power switch on the board.
Edit: Nothing was there? I blew out the dust reassembled the phone and now it works fine. Weird.
Hello all,
I got this phone about a month and a half ago, and since I got it I've noticed a lot of freezing and crashing (more so after the 5.1 update).
Some examples:
-I try unlocking the phone from active display and the screen goes black. The only way to get out of it is to hold the power button to restart.
-Sometimes the phone freezes on the lock screen randomly, and when I pick up the phone to look at it, the time is wrong and I can't physically unlock the phone, only turn the screen on and off, leading to me having to hold the power button down to shut off and restart.
-When on some apps, like twitter for example, the phone freezes, and I cannot do anything except turn off the screen by pressing the power button. When I try waking the phone, it stays black or sometimes theres a flash of the screen I was on before, and then it goes black again. Only thing I can do here is hold the power button down until "Power Off" shows up on the screen, and I press that to shut the phone off.
Today I cleared the cache, and since then the phone has froze once, causing me to do a hard reset. What should I try next? Any idea what the problem could be?
Thank you for the help.
I have pretty much the exact same thing going on. It started last night... I first noticed I had some charging issues where the phone wasn't charging very quickly after the battery died (after a day of heavy use). I let it sit for awhile, then it booted up, and it showed the motorola splash screen. It gets all the way to the lock screen, although I'm unable to unlock the phone. The screen goes dark. It appears to still be getting texts and the like- although this screen blackness issue makes it so I can't unlock the phone. The one thing I can do is hold down the power button and turn it off. I've tried loading fastboot and doing a factory reset, although nothing appears to happen and it boots the same way. The other thing about it is that it appears to be running hot- way hot. Any ideas? I'm running stock rom, Verizon network, just updated to 5.1 when it came out last week.
Hi all,
Putting up this post because I am at my wits end! I have had my Galaxy Tab S2 now for about a month. Just recently I would be using it and it would seem to start lagging a bit, and then without warning it would basically either power cycle, or just freeze and power off. Upon restarting, everything would go as per normal, and then after a few minutes it would happen again.
Went through the process of backing everything up so I could factory reset. This was a strange experience. The files would begin transferring to the backup media, and then the process would freeze, and the power cycle happen again. What made it strange was that if I kept touching the screen, the transfer would continue. Leave it to its own devices and it would freeze and power down or power cycle. Anyways, managed to get what I could off it. On to a factory reset.
Ensuring it was off, I pressed the power and volume up buttons, ending up with a screen with the android robot. Then it shows a screen with the android robot on its side and an exclamation mark above it. Finally to the recovery screen. Here things got a bit hinky too. I would use the volume up/down keys to move through the options available, and then found that the up/down buttons became unresponsive. Frustrated I touched the screen a couple of times and what do you know, the selected choice would move according to what volume button pressed. OK that's weird, and what do you know, after a while it reboots irregardless of choice.
Finally managed to get it to factory reset, wipe everything and on start launch into the setup procedure. "Yay" thought I, "Nay" thought the tablet. Now i'm stuck with a tablet that gets about halfway through the process, freezes, then reboots or powers off. Thing is, it ALWAYS seems to happen at a point in which keyboard interaction is required. I get about halfway through typing my name and snap.
So yeah I have no idea. I'm thinking it could have something to do with battery, however, this all still occurs even if it is plugged into a source. So before I go about trying to work out how to get the back off, I thought I would ask for some advice here!
Seriously, any suggestions would be greatly appreciated!
Cheers,
Chyr0n
Get a new one.
Sent from my SM-T710 using Tapatalk
Yeah, it's new and is not rooted. Why not going thru warranty and get a new one?
Sent from my SM-T810 using Tapatalk
I've got an AT&T HTC One M7. It's non-rooted and has stock firmware. Android updates from AT&T are installed when pushed. It's all pretty routine. As of yesterday evening, this phone started rebooting and won't stop.
If I leave it alone, it vibrates (normal startup notification), goes to the green on white "htc" screen for a few seconds, then goes blank and starts over. I can get to the bootloader screen, and I've gotten it to start in safe mode as well, but it always restarts again within a few seconds.
Things I've done/found:
- Holding down the volume down button while it restarts takes me to the bootloader menu, but the buttons don't seem to work correctly when I get there, and it always restarts again within a few seconds.
- I managed to start it in safe mode a few times--I think by holding volume up and volume down at the same time--but it restarted before I could do anything.
- I removed the SIM card. Same thing.
- I let it reboot until it died. As soon as I plugged it in, it started the same thing again.
I'm starting to think it's hardware failure, like the power button is constantly making contact, even though the button feels fine to the touch. Note that I get to the bootloader just by holding the volume down button. I don't have to touch the power button. I'm not certain whether that's normal. Can anyone give me any ideas or even just verify that it seems like a hardware problem?