Database Develop

[Q] Firmware Upgrade Failure

Hello
I have tried to update my Galaxy Mini's firmware using Samsung Kies. Kies just shut down once the progress bar for the download reached 100%, it never installed it. I have tried using the Emergency Recovery Code but the same thing happens. The phone will no longer do anything - turn on or off. It just looks like there is power - the screen appears to be backlit.
Any advice you can offer would be greatly appreciated!
Thanks

Sorry I should have also said it's an S5570!

put your phone into download mode
it may look like phone--!--computer instead of yellow triangle
then just flash a four package firmware with the help of odin multi downloader

[Q] Galaxy Ace stuck on boot logo.cant enter recovery mode.flash via odin nothing hap

please help me! Galaxy Ace s5380 stuck on boot logo, i try to use the HOME + Power but i cannot enter to recovery mode, and i also try to flash it through Odin... with S5830DXKPB firmware asian...then the download logo is color yellow?? is that right or it must be color light blue? then also nothing happen still stuck on the boot logo saying galaxy ace... but i noticed that after it was flash the 1st logo appears is galaxy ace.. but when i remove it and reset the phone the first logo is samsung???i also notice that com port mapping has the only box that has color,. i think that on its top the bigger box must have color too when i connect my phone.. and it can only have color when it saids pass!!! PLEASE GIVE ME SOLUTIONS!!! tnx in advance! i can go to download mode that is color yellow logo... but still after i finish flashing via odin nothing happens../[ like i said the red circle means the upper box is loading but not having color... the blue box means it is the box that has only color... PLEASE HELP! see attachments

UP for this thread...
i can still go to download mode.. but when i flash it to odin... when it was finished the phone is stuck up in galaxy ace logo?? what should i do???

booeramis said:
UP for this thread...
i can still go to download mode.. but when i flash it to odin... when it was finished the phone is stuck up in galaxy ace logo?? what should i do???
Click to expand...
Click to collapse
PDA -> CODE* file
EFS -> empty !!!
PHONE - > MODEM* file
You have flashed modem file as EFS.
Try download mode (VOL down + MENU + POWER).

PDA,PHONE,EFS fixed... but still stuck!!!
ive done what youve said... but stuck on galaxy ace boot.... i try to charge my ace then i noticed that its going to overheat... and whenever i try to charge in it boots in galaxy ace boot... then i also noticed that when the 1st time i fixed my ace through this firmware... i get some black screen(absolutely no power on scree but has light on keypad)... does this firmware does not compatible with my phone?? i do have flash it again because i noticed the black screen problem... then i got this stuck on galaxy ace problem!!!

booeramis said:
ive done what youve said... but stuck on galaxy ace boot.... i try to charge my ace then i noticed that its going to overheat... and whenever i try to charge in it boots in galaxy ace boot... then i also noticed that when the 1st time i fixed my ace through this firmware... i get some black screen(absolutely no power on scree but has light on keypad)... does this firmware does not compatible with my phone?? i do have flash it again because i noticed the black screen problem... then i got this stuck on galaxy ace problem!!!
Click to expand...
Click to collapse
try to flash the full package which is XXKPH download it and flash..
cooper = cooper v1
pda = code
phone = modem
boot = appboot
csc = multi csc
leave efs empty..
flash it and i am sure it will be ok..
this is the only step i followed when flashig..appboot will only included on the flashing if and only if the phone is on stuck and bootloop problem..

mizukage said:
try to flash the full package which is XXKPH download it and flash..
cooper = cooper v1
pda = code
phone = modem
boot = appboot
csc = multi csc
leave efs empty..
flash it and i am sure it will be ok..
this is the only step i followed when flashig..appboot will only included on the flashing if and only if the phone is on stuck and bootloop problem..
Click to expand...
Click to collapse
is it ok even i flash the russian firmware XXKPH?? im from the philippines... so you said that i should not put appboot?? do i need or not? im stuck on boot galaxy ace??? im confused???

Use a latest version of Odin...
Go to samfirmware and download a rom which suits you...
Flash it and there should be no Problem

Ace s5830 stuck
~PAIN said:
Use a latest version of Odin...
Go to samfirmware and download a rom which suits you...
Flash it and there should be no Problem
Click to expand...
Click to collapse
Hi, I've downloaded Odin and the appropriate firmware to install. My phone was set to download (Orange/yellow text) but an error appears on pc stating 'an unnamed file was not found.'
Please help and provide guidance for a novice to Android.
Many thanks.

paulscarbs said:
Hi, I've downloaded Odin and the appropriate firmware to install. My phone was set to download (Orange/yellow text) but an error appears on pc stating 'an unnamed file was not found.'
Please help and provide guidance for a novice to Android.
Many thanks.
Click to expand...
Click to collapse
Do post the screenshot so we know more about what we are looking at.

Unusual Boot Loop - No Recovery, Odin Flash Appears to Succeed but Doesnt Fix Loop

Hello,
For the past few days I've been reading up on XDA and other forums to attempt to solve my boot loop issue. I'm hoping this forum can help me.
Hardware/Locale:
AT&T S6 Edge (USA)
Android 5.1.1, Stock
G925AUCU3BOJ7 firmware version
Issue:
At some point after completing a call using a paired Bluetooth device, the phone entered and remains stuck in a boot loop, exhibiting the following behaviors:
Phone powers on when plugged in to either phone or wall outlet
Upon power on, phone attempts to boot, getting as far as the Samsung Galaxy S6 Edge screen (NOT the Samsung logo screen)
After a few seconds, the phone reboots, and repeats the pattern
No LED lights activated on the phone; no "Blue" LED, or other colors, flash at any time
...with complications/other factors:
Cannot access Recovery - pressing the standard combination of buttons (Power-Home-VolumeUp) at any/all points in the process fails to start recovery; tested procedures on my spouse's identical S6 Edge with identical firmware, and was able to start Recovery
Cannot access Safe Mode - pressing the standard combination of buttons does not cause the phone to enter Safe Mode
EDIT:
Tried Kies - claims device is Unsupported.
EDIT:
Tried Smart Switch - claims device is Unsupported.
Fixes Attempted:
Discharge the phone completely and try again - No effect; problem remains
Charge the phone using a different wall charger, USB cable, or even laptop as power source - No effect; problem remains
Boot to Download Mode and flash G925AUCU3BOJ7 stock firmware obtained from XDA in combinations of 1) Just AP, 2) AP + BL, and 3) AP, BL, CP, and CSC - Appears to flash successfully, based on ODIN behavior, but No effect; problem remains
Boot to Download Mode and try previous versions of stock firmware for my device obtained from XDA - Same behavior as above
Were there not currently a blizzard raging outside my house, I'd drive over to the AT&T store and ask for help. But there's that whole blizzard thing. Not going anywhere.
Any ideas?

wmbutler said:
Hello,
For the past few days I've been reading up on XDA and other forums to attempt to solve my boot loop issue. I'm hoping this forum can help me.
Hardware/Locale:
AT&T S6 Edge (USA)
Android 5.1.1, Stock
G925AUCU3BOJ7 firmware version
Issue:
At some point after completing a call using a paired Bluetooth device, the phone entered and remains stuck in a boot loop, exhibiting the following behaviors:
Phone powers on when plugged in to either phone or wall outlet
Upon power on, phone attempts to boot, getting as far as the Samsung Galaxy S6 Edge screen (NOT the Samsung logo screen)
After a few seconds, the phone reboots, and repeats the pattern
No LED lights activated on the phone; no "Blue" LED, or other colors, flash at any time
...with complications/other factors:
Cannot access Recovery - pressing the standard combination of buttons (Power-Home-VolumeUp) at any/all points in the process fails to start recovery; tested procedures on my spouse's identical S6 Edge with identical firmware, and was able to start Recovery
Cannot access Safe Mode - pressing the standard combination of buttons does not cause the phone to enter Safe Mode
EDIT:
Tried Kies - claims device is Unsupported.
EDIT:
Tried Smart Switch - claims device is Unsupported.
Fixes Attempted:
Discharge the phone completely and try again - No effect; problem remains
Charge the phone using a different wall charger, USB cable, or even laptop as power source - No effect; problem remains
Boot to Download Mode and flash G925AUCU3BOJ7 stock firmware obtained from XDA in combinations of 1) Just AP, 2) AP + BL, and 3) AP, BL, CP, and CSC - Appears to flash successfully, based on ODIN behavior, but No effect; problem remains
Boot to Download Mode and try previous versions of stock firmware for my device obtained from XDA - Same behavior as above
Were there not currently a blizzard raging outside my house, I'd drive over to the AT&T store and ask for help. But there's that whole blizzard thing. Not going anywhere.
Any ideas?
Click to expand...
Click to collapse
Wish i Could Help..anyways found an article
http://thedroidguy.com/2015/09/gala...n-download-mode-other-charging-issues-1049588

Hi. Did you find the solution / explanation for this situation?

Same problem
facing the same problem, did you find any solution. please help me out.

same thing happened to mine on Jan 2. Phone did its usual all night charge (so was fully charged). I used it a little that morning to check facebook etc. Laid it down, that afternoon needed to make a phone call, hit the power button and now i'm in this loop. ATT was ZERO help. To add, i have red and black lines as my background (which is usually just black) when booting up. I have done all the things you have and phone continues to cycle. This phone has been an absolute piece of poo poo. The laminate started to peel off the front at one of the corners. I keep my phone in a case and don't drop it or haven't in a long time. The camera lens is cracked, so is my sons. You can't root it. Now this...i will never own another samsung product again. I moved back to my son's old htc one ( i gave mine away ...stoopid me). This morning it had a software update (it hasn't been on in 1.5 years) so I said yes. Now it won't boot. GRRR!!!! Keep us posted. I'll do same if I figure it out.
Edit: meant to add, my blue light stays on until eventual total power drain.

Same issue
Hi Guys,
I'm facing the same issue. I tried re-flashing different roms, odin says success but i'm stuck with bootloop. I can go into only download mode, no recovery, no hard reset. I visited the samsung service center and they said that they can't help since KNOX counter is tripped: 1 (0x0500) . Were you guys able to fix this issue. ?
If anyone has a solution please share it here.

stuck in bootloop also
I am having the same problems as you guys for the last 4 days, it doesn't go into recovery mode, only thing it does is go into ODIN mode ,I have also tried flashing the stock firmware through ODIN and it passes but it's still stuck in a boot loop. Please let me know if one of you guys fixed your phone.

its same here anybody can show a guide how to fix this or jtag needed ? or need to return service?

Hi
same problem for me...

same here tired many things and cannot boot nor in recovery

Facing the same issue with my s6 edge. No safe mode, no recovery, just download mode. Also did what everyone else did. Installed the latest ROM for it. Odin looked quite happy with itself for passing the download successfully, but in my case, the phone doesn't boot loop, it just stays on the S6 edge startup screen and doesn't budge until I unplug it. Doesn't appear that the battery is charging either, even though a new one was installed recently, so I am at a loss as to what needs to be done to fix this thing and apparently so is everyone else. Hope we get some answers soon!

Any update on this issue? I assume no other solution than replacing the motherboard has been found. This phone has been only trouble for me...

gunmoule said:
Any update on this issue? I assume no other solution than replacing the motherboard has been found. This phone has been only trouble for me...
Click to expand...
Click to collapse
Apparently not! I guess that seems to be where I'm headed too, but not until the prices of motherboards come down. On ebay I'm still seeing working mobos for around $100. In my opinion, that's way to much for a phone this old.

Viking8 said:
Facing the same issue with my s6 edge. No safe mode, no recovery, just download mode. Also did what everyone else did. Installed the latest ROM for it. Odin looked quite happy with itself for passing the download successfully, but in my case, the phone doesn't boot loop, it just stays on the S6 edge startup screen and doesn't budge until I unplug it. Doesn't appear that the battery is charging either, even though a new one was installed recently, so I am at a loss as to what needs to be done to fix this thing and apparently so is everyone else. Hope we get some answers soon!
Click to expand...
Click to collapse
I used Heimdall. Download any stock rom preferably the higher version from installed rom. Unpack all the DOT.tar.DOT.md5 get the full image at least : sboot.bin system.img recovery.img boot.img param.bin flash it on download mode:
Code:
$ heimdall flash --BOOTLOADER sboot.bin --PARAM param.bin --RECOVERY recovery.img --SYSTEM system.img --BOOT boot.img
if the room version is higher, flashing bootloader is mandatory, if the rom version at the same level bootloader not neccessary. Modem is not neccessary but optional can also flash.

x1123 said:
I used Heimdall. Download any stock rom preferably the higher version from installed rom. Unpack all the DOT.tar.DOT.md5 get the full image at least : sboot.bin system.img recovery.img boot.img param.bin flash it on download mode:
Code:
$ heimdall flash --BOOTLOADER sboot.bin --PARAM param.bin --RECOVERY recovery.img --SYSTEM system.img --BOOT boot.img
if the room version is higher, flashing bootloader is mandatory, if the rom version at the same level bootloader not neccessary. Modem is not neccessary but optional can also flash.
Click to expand...
Click to collapse
I tried through the GUI of Heimdall, but it never actually flashes anything. It says it's "Beginning Session....." waits for a couple minutes and then releases the device. The SM-G925T I have has these files in the tar file when unpacked.
boot.img
cache.img
cm.bin
modem.bin
recovery.img
sboot.bin
system.img
Could you show me what the syntax would look like in the CMD for these files?
Ex. $ heimdall flash --BOOTLOADER sboot.bin --RECOVERY recovery.img --SYSTEM system.img --BOOT boot.img etc. etc.
Clayton
NEW INFO:
I tried to flash just the recovery to see if it would install, but Heimdall in the cmd does the same thing as the GUI.
Initializing connection....
Detecting device....
Claiming interface....
Setting up interface....
Initializing protocol....
ERROR: Failed to send data! Releasing device interface....
MORE INFO: (About 30 minutes later)
I tried a different version of ODIN, (3.10) and I was able to successfully load G925TUVS6FRC1_G925TTMB6FRC1_G925TUVS6FRC1_HOME.tar, but it just sits at the Samsung Galaxy S6 Edge screen forever like it did before. Not sure what to do at this point. Any other suggestions would be welcomed!

My Tab S2 T715 stuck on a bootloop

Hi everybody,
Can you help me ?
What happens :
1°) Root my tablet with CF-autoroot (smt715_cf-autoroot.tar) => Seems to be ok, as SuperSU update binaries.
2°) Update Recovery with TWRP_3.0.0-1_sm-t715.tar => Seems to be ok.
3°) In recovery, I made a backup, just in case. The backup seems to be ok, I had a confirmation that I could reboot.
4°) Reboot => Bootloop.
I can't enter in recovery mode anymore.
I can enter in download mode.
=> I tried to flash with the official ROM : T715XXU2APB2_T715OXA2APB2_T715XXU2APB2_HOME.tar.md5 => Useless
=> I tried to restore my tablet with Samsung Smart Switch => Useless
=> I tried to flash PIT (GTS28LTE_EUR_OPEN.pit) => Useless...
I don't know what to do now...
Thanks for your help

Stating useless doesn't help.
You to be more descriptive as to what happens.
Your next step should be to reinstall twrp and boot to recovery then see which partitions you can mount.

When I say "Useless", it means that nothing change. I'm still stuck with the endless "Samsung" logo.
I tried to reinstall twrp with ODIN. It's working as at boot, I can see "recovery is not seandroid enforcing" in red.
If I flash the recovery partition with the official recovery from samsung, the red line disappears.
But in any case, I still can not restart in recovery mode :/

Anathorn said:
When I say "Useless", it means that nothing change. I'm still stuck with the endless "Samsung" logo.
I tried to reinstall twrp with ODIN. It's working as at boot, I can see "recovery is not seandroid enforcing" in red.
If I flash the recovery partition with the official recovery from samsung, the red line disappears.
But in any case, I still can not restart in recovery mode :/
Click to expand...
Click to collapse
What I meant was you need to be more specific with details if what happens when flashing.
Try and flash the stock firmware with the PIT file, check the repartition option.

ashyx said:
Try and flash the stock firmware with the PIT file, check the repartition option.
Click to expand...
Click to collapse
Ok, I just did it : See file "odin_1.png"
PASS ! See file "odin_2.png"
And just after the reboot, still stuck, and can't enter in recovery mode ("Home, Volume up and Power button" does nothing)
See file IMG_20160428_224728.jpg

When I boot in download mode, it's write :
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-T715
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Secure Download : Enabled
KNOX WARRANTY VOID: 1
RP SWREV: B:2 K:0 S:0
Click to expand...
Click to collapse
When I execute Samsung Smart Switch, the software identify my phone as :
PDAB2
CSCA1
PHONEB2 (XEZ)
Click to expand...
Click to collapse

I don't know if this can help, but I just print the pit of my tablet with heimdall
(cf attached file)

Same problem with my tab S2 T815
It is in bootloop please help tried every thing it is not going to recovery mode what to do now?

I've had the same issue with mine for a full day. S2 T810. I've flashed stock firmware, was able to get in and factory reset, but still sits at Samsung log until I unplug it and let it drain the battery dead. I flashed T810XXU2CPD9_T810XARCPE1_HOME. Anyone try any others, maybe an older firmware?

CKrzacz said:
I've had the same issue with mine for a full day. S2 T810. I've flashed stock firmware, was able to get in and factory reset, but still sits at Samsung log until I unplug it and let it drain the battery dead. I flashed T810XXU2CPD9_T810XARCPE1_HOME. Anyone try any others, maybe an older firmware?
Click to expand...
Click to collapse
You don't need to flash anything to get out of the download mode. You merely need to hold the correct combination of keys for about ten seconds to turn the tablet off. But it is the SAME combination of keys used to boot into the download mode so you MUST release the keys as soon as the screen blanks or the tablet will boot right back into download. The keys, or buttons, are the Vol down, Home and Power. Also, no USB cable should be attach when you do this.

lewmur said:
You don't need to flash anything to get out of the download mode. You merely need to hold the correct combination of keys for about ten seconds to turn the tablet off. But it is the SAME combination of keys used to boot into the download mode so you MUST release the keys as soon as the screen blanks or the tablet will boot right back into download. The keys, or buttons, are the Vol down, Home and Power. Also, no USB cable should be attach when you do this.
Click to expand...
Click to collapse
Mine isn't stuck in download mode. It's stuck at the Samsung logo fading in and out.

CKrzacz said:
Mine isn't stuck in download mode. It's stuck at the Samsung logo fading in and out.
Click to expand...
Click to collapse
Same thing will turn your tablet off but you will either need to flash something via Odin or restore a backup from TWRP.
edit: The reason for your bootloop is either you flashed the wrong ROM for your tablet or failed to perform a Wipe prior to flashing.

lewmur said:
Same thing will turn your tablet off but you will either need to flash something via Odin or restore a backup from TWRP.
Click to expand...
Click to collapse
I've flashed the 5.1 and 6.0 firmware now and it still has the same result, just sits at Samsung logo forever...
Edit: I was able to get into recovery after each of these and reset.... but same result, just sits at Samsung logo.

CKrzacz said:
I've flashed the 5.1 and 6.0 firmware now and it still has the same result, just sits at Samsung logo forever...
Edit: I was able to get into recovery after each of these and reset.... but same result, just sits at Samsung logo.
Click to expand...
Click to collapse
Is the system partition accessible via twrp file manager?

Small update, it gets to android start splash screen but then EVERYTHING crashes... pic attached. Going to root and install twrp to see what happens next...

ashyx said:
Is the system partition accessible via twrp file manager?
Click to expand...
Click to collapse
Just rooted, and yes it's accessible.
---------- Post added at 04:20 PM ---------- Previous post was at 04:02 PM ----------
Update: Installed CM 12.1 to see if maybe it was a software bug... And as soon as it gets to "Android is starting..." it finishes the apps and reboots, every single time.

CKrzacz said:
Just rooted, and yes it's accessible.
---------- Post added at 04:20 PM ---------- Previous post was at 04:02 PM ----------
Update: Installed CM 12.1 to see if maybe it was a software bug... And as soon as it gets to "Android is starting..." it finishes the apps and reboots, every single time.
Click to expand...
Click to collapse
Wipe data.

ashyx said:
Wipe data.
Click to expand...
Click to collapse
Same result.

Stuck on bootscreen

Hello guys
As title says im stuck on bootscreen with "samsung galaxy m21". It happened before like 3-4 times but stopped after. Now the problem is more serious. It wont shut off, always restarts to the same point
I installed some apps from apk pure and used them for 3 days
I have unlocked bootloader no root
is it possible to save my device ?

Something similar happened with me yesterday. By the grace of almighty Allah, I managed to save my device. Wait for drain battery completely. After power off, charged it some percentage like 15%. Open Odin in your PC. On your mobile, go to download mode (press and hold both volume buttons, then connect mobile to PC by insert data cable to mobile). Flash samsung firmware by Odin. [email protected]

mehediceps said:
Something similar happened with me yesterday. By the grace of almighty Allah, I managed to save my device. Wait for drain battery completely. After power off, charged it some percentage like 15%. Open Odin in your PC. On your mobile, go to download mode (press and hold both volume buttons, then connect mobile to PC by insert data cable to mobile). Flash samsung firmware by Odin. [email protected]
Click to expand...
Click to collapse
I am facing the same issue. There was rom update installed and post that its stuck on Boot Screen. Where can I find the Samsung full rom and the latest version of ODIN that will work on the Samsung M21
Also will the phone be in warranty after I install the rom through ODIN ?

You can find latest Samsung firmware in 'samfw.com' website. Also, you can find odin in this forum and some M21 telegram channel.

kailashnj said:
I am facing the same issue. There was rom update installed and post that its stuck on Boot Screen. Where can I find the Samsung full rom and the latest version of ODIN that will work on the Samsung M21
Also will the phone be in warranty after I install the rom through ODIN ?
Click to expand...
Click to collapse
You can also use friza tool to download the firmware of any samsung phones.