lenovo k3 note directly go to recovery mode when power on - K3 Note Q&A, Help & Troubleshooting

i tried to root my phone lenovo k3 note via kingoo root and after that it doesn't turn on , it always goes to recovery mode. what to do?

ankur205 said:
i tried to root my phone lenovo k3 note via kingoo root and after that it doesn't turn on , it always goes to recovery mode. what to do?
Click to expand...
Click to collapse
Which recovery stock or custom
If stock then try to clear the data. If that doesn't work just flash stock ROM.
If custom just restore a backup. Or Just flash stock.

i am on custom recovery twrp i have same problem i can't able to flash stock rom because after press download button on spflash tool i turned off my phone and connect to pc then no process start and my phone booted in recovery mode.

Related

[Q] cannot enter recovery mode when flashed eaglesblood rom

SO here it goes....
1. Rooted phone
2. Installed Clockworkmod recovery tool
3. Flashed a lot of CM Roms.
4. Flashed eaglesblood Rom, works fine but now I cant enter recovery mode. (Power button+Vol down button)
Please help as I wanna Flash a different ROM and I really need to know how can i enter the recovery mode.
During boot when i try entering the recovery mode the phone just runs normally and switches on and doesnt enter the recovery mode..
PLEASE HELP
amarverma06 said:
SO here it goes....
1. Rooted phone
2. Installed Clockworkmod recovery tool
3. Flashed a lot of CM Roms.
4. Flashed eaglesblood Rom, works fine but now I cant enter recovery mode. (Power button+Vol down button)
Please help as I wanna Flash a different ROM and I really need to know how can i enter the recovery mode.
During boot when i try entering the recovery mode the phone just runs normally and switches on and doesnt enter the recovery mode..
PLEASE HELP
Click to expand...
Click to collapse
Rebooting in into recovery or boot loader directly from ABD For beginners:
http://forum.xda-developers.com/showthread.php?t=1853159
[HOW TO] Flashing ClockworkMod via ADB:
http://forum.xda-developers.com/showthread.php?t=1608042

always boot into cwm recovery mode

My lenovo a-7000 boot into cwm recovery mode
Last time when I restarted my phone it's goes direct into recovery mode after then whenever,i reboot my system it's get back into recovery mode.
I tried power off and manually power on by power button and factory reset but it's not fixed.
Help me to get back my a-7000
I tried key test so it's confirm that my volume buttons are working fine
Am using cwm recovery and AOSP stallion mod custom rom
installed miui 7.0 also
I installed miui 7.0 custom rom also but it's not working either
When I power on my phone it's shows miui 7 logo and the enter into cwm recovery direct
Can I reset my bootloader? Please help me someone ????
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
problem solved
Download stock recovery.zip of lenovo a7000 from xda and install it via cwm and my phone remove cwm recovery from system and add stock recovery after that I downloaded original marshmallow stock rom of a7000 put it in SF card ,rename stockrom.zip to update.zip and put a card in phone
Open stock recovery click on install updates and hurray phone automatically detect update.zip and installed
After reboot my phone got a new life it's back with pure stock rom marshmallow
baby1982 said:
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
Click to expand...
Click to collapse
Download original marshmallow stock rom of a7000 and put it in Sd card rename it to update.zip and install it via recovery 'install update'
Hope it'll help you
baby1982 said:
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lenovo-a7000/development/stock-firmware-lenovo-a7000-t3205505link of OTA stock rom and other files

[Q] How to reflash a Stock Rom back after a soft brick?

Hi to everyone! Can anyone explain me how to reflash a Stock Rom (6.0.1 or 7.0) back after a soft brick? I mean, once I accidentially installed an OTA update over rooted Android 7 with TWRP recovery, so after restarting the phone got TWRP bootloop and did not enter in the fastboot mode. Tried to reflash a nandroid backup (ResurrectionRemix-M-v5.7.4-20160920-seed) and clean installation of the following Roms:
[TWRP] General Mobile 4G Android 6.0.1 MOB30Q Stock ROM
[TWRP]General Mobile 4G Android N 7.0 NRD90R Stock ROM
cm-13.0-20160930-UNOFFICIAL-seed
ResurrectionRemix-M-v5.7.4-20160920-seed
cm-14.0-20161003-UNOFFICIAL-seed
omni-7.0-20161017-seed-HOMEMADE
but none of them helped. Is there a workaround on making the phone enter in the fastboot mode? Or can I reflash Stock Recovery 6.0.1 MOB30Q or Stock Recovery 7.0 NRD90R via TWRP to get clean installation of the Android 6.01. or 7?
If you want to keep twrp in your phone i don't know how i can help you, but otherwise you could search the stock bootloader etc and then flash it via adb/fastboot in the commandprompt on your computer. After that reboot to bootloader and then flash the rest of the files.
snrfie said:
If you want to keep twrp in your phone i don't know how i can help you, but otherwise you could search the stock bootloader etc and then flash it via adb/fastboot in the commandprompt on your computer. After that reboot to bootloader and then flash the rest of the files.
Click to expand...
Click to collapse
The problem was - I could not enter into the adb/fastboot mode due to TWRP bootloop. That was a result of the OTA flashing over custom root and recovery. So I could neither recover my backup nor flash any custom or stock roms (flashing of custom or stock roms goes ok but restart results in TWRP bootloop).
I'm sorry, but i don't think i could help you with that. However with my huawei honor holly it was able to flash things if i removed the battery and disconnected it from the usb cable, then pressed volume down and power and put sptool in flashmode. When i connected it it would immediately start in fastboot mode but kind of basic. I don't know how to achieve immediate flashing after connecting to computer with adb/fastboot commands. Hope this helps.
snrfie said:
I'm sorry, but i don't think i could help you with that. However with my huawei honor holly it was able to flash things if i removed the battery and disconnected it from the usb cable, then pressed volume down and power and put sptool in flashmode. When i connected it it would immediately start in fastboot mode but kind of basic. I don't know how to achieve immediate flashing after connecting to computer with adb/fastboot commands. Hope this helps.
Click to expand...
Click to collapse
So, my experience in solving this problem was like this: I started Install MOB30Q.bat from images folder (starting INSTALL_Android N 7.0 September Update.exe could not help), got a message waiting for device and gave a reboot on the phone already connected to PC (in TWRP mode). Flashing process started with some errors, but the main thing - phone got flashed with a Stock Rom over the exisitng Custom one.
There is a workaround on a Russian forum but that's a quite complicated method requiring a modified USB cable.
The other way is to flash 5.1.1 Stock Rom as it is adviced on the same forum but that's a Swift stock rom so I did not risk.
you did not mention what your device is! am i correct to assume that it is a gm 4g android one? if it is, then search and download for a stock rom that is flashable via fastboot.
with your device, remove the battery to force it to switch off, assuming you still have a bootloop as you said. refit the battery and then switch the phone to fastboot mode by pressing vol-down+power on. the rest is already a standard process to flash the stock rom via fastboot. this procedure guarantees that everything in your phone is erased to be replaced by the stock rom you just flashed.

THE Phone stuck at boot logo

yesterday i have flashed twrp recovery to my lenovo a7000 and rooted the phone ..
but bt worng i 've wiped every think via twrp recovery ..
then i tried to power up the phone then i still stuck at the boot logo .
then i tried to flash the stock rom via sp flash tool but it didn't work because when i connect the phone to the usb cable " while the power off " it starts and stock at the boot logo again ..
i still have the twrp recovery on phone but i can't flash the stock rom . what shuld i do ?
mohamed khaled OK said:
yesterday i have flashed twrp recovery to my lenovo a7000 and rooted the phone ..
but bt worng i 've wiped every think via twrp recovery ..
then i tried to power up the phone then i still stuck at the boot logo .
then i tried to flash the stock rom via sp flash tool but it didn't work because when i connect the phone to the usb cable " while the power off " it starts and stock at the boot logo again ..
i still have the twrp recovery on phone but i can't flash the stock rom . what shuld i do ?
Click to expand...
Click to collapse
Flash a custom ROM using twrp.first download the ROM in PC or another mobile which has sd card. Then copy that ROM using ADB push commands or just insert a memory card with Rom in it. Then instll through TWRP

T719 UK

Hello. I have a Samsung tab S2 T719 that is perma stuck in bootloop. Originally the recovery mode was working but i probally messed that up aswel by flashing some TWRP custom recovery.. it now bootloops even when i turn it on in recovery mode. I am not sure if the tablet has USB debugging on.. also, I just tried to flash another stock nougat firmware on to it via odin and it passed but when i turn it on it has the same bootloop issue. Is there anything i can do to it ? the tablet is in brilliant condition physically and it would be a shame to sell it for parts or bin it >_< Regards
You need the correct recovery mode before ROM. After flashing TWRP, go to TWRP, backup EFS, format data, then flash ROM. Don't boot after flashing TWRP, just go directly from download mode to recovery mode
sarjarim said:
You need the correct recovery mode before ROM. After flashing TWRP, go to TWRP, backup EFS, format data, then flash ROM. Don't boot after flashing TWRP, just go directly from download mode to recovery mode
Click to expand...
Click to collapse
I flashed a working TWRP now and thats all dandy and it works and then i followed ur steps and after i flashed the rom i tried to turn it on and it continues the endless bootloop after it says ''installing applications''... it did exactly the same with all roms i tried.
Could u try another ROM, if it's still bootloop then maybe hardware problem.

Categories

Resources