Database Develop

[Q] HELP! Really Serious Problem On My SGT gt-p1000

Recently i rooted my Samsung Galaxy Tab(SGT) GT-p1000 that was brought from Singapore using the oneclickroot method.
My problem began when i heard about using heimdall to flash custom ROMS on the SGT. So i downloaded the Heimdall files and used heimdall frontend to attempt to root my SGT. Before that i had already used the zadig files to install the samsung composite USB driver. However as i boot my SGT into download mood, i accidentally pressed start to flash into my SGT with only the zimage and a wrongly selected Factoryfs file, These were taken from the BOCA rom I wanted to try to install.
Then i think i went into Boca's bootloader but i couldnt do anything. So i tried to reboot the device but it couldnt boot anymore. Just showed and android with an Exclamation mark. So i saw this thread http://forum.xda-developers.com/showthread.php?t=966015 and i thought that maybe i could use heimdall to flash back the default files. So i reflashed the new FactoryFS Zimage and Param.ifs provided by this new rom.
Now i can boot the phone normally into froyo 2.21, however now everytime i press the lock button the phone retarts. And everytime i try to connect to the internet using WiFi my phone restarts as well. 3g no longer works too. T_T
I can no longer connect to Kies and i tried reinstalling the drivers again but nothing would fix it. I cant use Heimdall or Odin to flash it anymore, Heimdall faced error -12 and Odin just kept trying to secure connection, but it never passes that point.
IM REALLY LOST AS TO WHAT TO DO. SOMEBODY HELP ME!!! PLEASE!

ADB
1-char

dirlan2001 said:
ADB
1-char
Click to expand...
Click to collapse
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.

rafaeker19 said:
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
Click to expand...
Click to collapse
Hmmm... Odin doesn't get connected , so ....

Probably Heimdall will also do the flash for you - Odin is just one Windows-based tool to flash that device. Heimdall should have the same features for differnt platforms (so you can use it also on MAC OSX and Linux)- give Overcome a trial - and don't forget to flash the modem, if you want a fully working device

Soft Brick GT-I8190L (Model L )

I am looking for a 3 days on this, and how to fix, but can not find solution for the L model GT-I8190. I can not get into Recovery Mode only download mode
Can anyone help me how to get back to completely Stock rom
this happened after trying to root, but the root of the files were only for the GT-I8190
This Post (http://forum.xda-developers.com/showthread.php?t=2150822) work with model L ????
I Need Help !!

XXrenan25XX said:
I am looking for a 3 days on this, and how to fix, but can not find solution for the L model GT-I8190. I can not get into Recovery Mode only download mode
Can anyone help me how to get back to completely Stock rom
this happened after trying to root, but the root of the files were only for the GT-I8190
This Post (http://forum.xda-developers.com/showthread.php?t=2150822) work with model L ????
I Need Help !!
Click to expand...
Click to collapse
Hey man
it's already a good thing you can get into download mode.
First off, you'll have to search for a stock rom for your country on Sammobile, go to this page and enter your device's information and your country: http://www.sammobile.com/firmwares/1/
Second off, you'll have to unzip/unrar the file from Sammobile, which will give you a .tar file - that right there is the stock firmware that we'll now flash onto your device again.
Third off, you should put your device in download mode and connect your S3 Mini to your computer via a micro-USB cable (if your computer doesn't recognise the phone, download Samsung Kies and that will install the correct drivers so your computer does recognise it).
Then open up Odin and put the .tar file in the 'PDA' section. Leave the other sections empty! Hit start and wait until it says that the device is all good to go. Don't disconnect the cellphone until Odin says so!

XXrenan25XX said:
I am looking for a 3 days on this, and how to fix, but can not find solution for the L model GT-I8190. I can not get into Recovery Mode only download mode
Can anyone help me how to get back to completely Stock rom
this happened after trying to root, but the root of the files were only for the GT-I8190
This Post (http://forum.xda-developers.com/showthread.php?t=2150822) work with model L ????
I Need Help !!
Click to expand...
Click to collapse
They have other methods of getting into recovery mode as well such as ADB method as i am using that method. Just search how to install adb and boot into recovery.

teamg123 said:
Hey man
it's already a good thing you can get into download mode.
First off, you'll have to search for a stock rom for your country on Sammobile, go to this page and enter your device's information and your country:
Second off, you'll have to unzip/unrar the file from Sammobile, which will give you a .tar file - that right there is the stock firmware that we'll now flash onto your device again.
Third off, you should put your device in download mode and connect your S3 Mini to your computer via a micro-USB cable (if your computer doesn't recognise the phone, download Samsung Kies and that will install the correct drivers so your computer does recognise it).
Then open up Odin and put the .tar file in the 'PDA' section. Leave the other sections empty! Hit start and wait until it says that the device is all good to go. Don't disconnect the cellphone until Odin says so!
Click to expand...
Click to collapse
But when I place a Stock Rom, the screen gets stuck on Samsung Galaxy SIII mini GT-I8190L

serophia said:
They have other methods of getting into recovery mode as well such as ADB method as i am using that method. Just search how to install adb and boot into recovery.
Click to expand...
Click to collapse
To achieve with ADB mode I need to install some application on android?
when I searched about it, the tutorials show before installing an application

You install onto computer and use the command prompt in windows to boot to recovery just search how to install adb. It can get confusing to download and install it might take a bit of time.
Sent from my GT-I8190 using xda app-developers app

There is no PIT Partition (ODIN)

Hi, guys.
Yesterday I tried to do something with the data in the EFS folder, it seems that I had a problem and unknowingly restart the terminal and suddenly when trying to start (and since) instead of the common logo of SGS3 mini GT-i8190 and background and letters in white, appears to me the first image; So when you try to start normally, like when I try to enter recovery mode (had installed TWRP) and when I connect it (off) the USB or charger.
All I can do (thankfully, but not as far as right now), I can enter download mode; but I can not flash anything because when I connect it to ODIN on windows, and try to flash ROMs or TWRP, it appears to me the second image.
I used the PIT file for my model (GT-i8190) and the option to Re-Partition in Odin but ODIN several minutes remains unanswered and at the end of the process I throws FAIL showing me what the third picture, not get proceed. Maybe I'm using a PIT file does not match my phone, it's weird.
Also attached file them as file ". pit" I use to try to repartition.
Please do not say it can be my USB cable or USB port PC or mobile, I know you are well.
What can I do?, Please, I need help!!!

CrashOverride93 said:
Hi, guys.
Yesterday I tried to do something with the data in the EFS folder, it seems that I had a problem and unknowingly restart the terminal and suddenly when trying to start (and since) instead of the common logo of SGS3 mini GT-i8190 and background and letters in white, appears to me the first image; So when you try to start normally, like when I try to enter recovery mode (had installed TWRP) and when I connect it (off) the USB or charger.
All I can do (thankfully, but not as far as right now), I can enter download mode; but I can not flash anything because when I connect it to ODIN on windows, and try to flash ROMs or TWRP, it appears to me the second image.
I used the PIT file for my model (GT-i8190) and the option to Re-Partition in Odin but ODIN several minutes remains unanswered and at the end of the process I throws FAIL showing me what the third picture, not get proceed. Maybe I'm using a PIT file does not match my phone, it's weird.
Also attached file them as file ". pit" I use to try to repartition.
Please do not say it can be my USB cable or USB port PC or mobile, I know you are well.
What can I do?, Please, I need help!!!
Click to expand...
Click to collapse
Now I think your product code (Product code : GT-I8190) in download mode is blank, right? So you tried to flash a pit file via Odin and it fail.
Hmm ... try to flash the pit file with a other Odin version. If it also give you a FAIL message then you can only send your phone back to Samsung center for repair it.

CrashOverride93 said:
Hi, guys.
Yesterday I tried to do something with the data in the EFS folder, it seems that I had a problem and unknowingly restart the terminal and suddenly when trying to start (and since) instead of the common logo of SGS3 mini GT-i8190 and background and letters in white, appears to me the first image; So when you try to start normally, like when I try to enter recovery mode (had installed TWRP) and when I connect it (off) the USB or charger.
All I can do (thankfully, but not as far as right now), I can enter download mode; but I can not flash anything because when I connect it to ODIN on windows, and try to flash ROMs or TWRP, it appears to me the second image.
I used the PIT file for my model (GT-i8190) and the option to Re-Partition in Odin but ODIN several minutes remains unanswered and at the end of the process I throws FAIL showing me what the third picture, not get proceed. Maybe I'm using a PIT file does not match my phone, it's weird.
Also attached file them as file ". pit" I use to try to repartition.
Please do not say it can be my USB cable or USB port PC or mobile, I know you are well.
What can I do?, Please, I need help!!!
Click to expand...
Click to collapse
The disorded image is probably because of a corrupted param partition. That's where the bootimages are.
Flash param attached in this post. http://forum.xda-developers.com/showthread.php?t=2030282 as PDA.

xXPR0T0TYPEXx said:
Now I think your product code (Product code : GT-I8190) in download mode is blank, right? So you tried to flash a pit file via Odin and it fail.
Hmm ... try to flash the pit file with a other Odin version. If it also give you a FAIL message then you can only send your phone back to Samsung center for repair it.
Click to expand...
Click to collapse
- I can see the Product Code or Product Name in download mode. You can see it in this picture below...

tys0n said:
The disorded image is probably because of a corrupted param partition. That's where the bootimages are.
Flash param attached in this post. http://forum.xda-developers.com/showthread.php?t=2030282 as PDA.
Click to expand...
Click to collapse
Y tried to flash the PARAM file as PDA with 3 differentes versions of ODIN and nothing happended. Always the ODIN give and error (the same error, FAIL).

OK I fix my problem many thanks!!!!

CrashOverride93 said:
Y tried to flash the PARAM file as PDA with 3 differentes versions of ODIN and nothing happended. Always the ODIN give and error (the same error, FAIL).
Click to expand...
Click to collapse
I don't know..
I looked at the pit file you posted and there's nothing wrong with it.
You can't boot in any other way but download mode?

try this, not failure
If you have not already solved try this ..
good luck
http://forum.xda-developers.com/showthread.php?t=2159660

Wrong kernel installed--> no boot, bricked?

I flashed this http://forum.xda-developers.com/showthread.php?t=2253010
I didnt see the full path and i though it was compatible for all S5830, S5830i... My big mistake.
It wont boot, but when connected on pc, windows 7 recognize it as a device.
What should i do?
Should i try stock with odin in this situation? http://forum.xda-developers.com/showthread.php?t=2609021
Please some help
PS
phone is detected with ODIN (yellow)
also, should i use the drivers from windows update or the ones provided in the link above (by overwriting windows 7 drivers)?
PS2
Found this
http://forum.xda-developers.com/showthread.php?t=2717288
currently reading

gmanos007 said:
I flashed this http://forum.xda-developers.com/showthread.php?t=2253010
I didnt see the full path and i though it was compatible for all S5830, S5830i... My big mistake.
It wont boot, but when connected on pc, windows 7 recognize it as a device.
What should i do?
Should i try stock with odin in this situation? http://forum.xda-developers.com/showthread.php?t=2609021
Please some help
PS
phone is detected with ODIN (yellow)
also, should i use the drivers from windows update or the ones provided in the link above (by overwriting windows 7 drivers)?
PS2
Found this
http://forum.xda-developers.com/showthread.php?t=2717288
currently reading
Click to expand...
Click to collapse
Can you enter the Download Mode? If yes, then you can solve this by flashing stock rom back using odin. If no, then its hard-bricked and you can consult a Service Center as the last resort. Do post the result. Hope I Helped

No download mode.
Samsung authorized service couldn t do anything.
Is there a way to unbrick it with debrick image or jtag or jig?...

Yes! Go for JTAG(seems complicated but it can help u out).
Btw Samsung care can fix ur phone even if it's out of warranty.

Help required: Galaxy Tab

I've been searching XDA & Google for about 1 month but can't find a solution. I don't know why everywhere in some threads whenever somebody asks the same problem there's no reply to that question. So I decided to post this question here to try my luck...
Problem & History:
I tried to root my Samsung Galaxy Tab GT-P1000R with DoonLord V_4, it couldn't root it but left the tab with touch problem then I tried to root it with famaroot various versions, I then again tried to root it with z4root V_1.3.0, all attempts were useless, I don't know which attempt of them, made my tab unable to connect to pc even in download mode.
When I set my tab to connect to Kies or Media it shows that it's connected but PC doesn't detect it. Please help...
Tab Specification:
Samsung Galaxy Tab GT-P1000 (Rogers)
Firmware Version: GB 2.3.6
Baseband Version: P1000XXJR2
Kernel Version: 2.6.35.7 ([email protected] #2
Build Number: GINGERBREAD.XXJU2

Hi adilpal, go to the first post here http://forum.xda-developers.com/showthread.php?t=1881981

Thanks!
mr.natural said:
Hi adilpal, go to the first post here http://forum.xda-developers.com/showthread.php?t=1881981
Click to expand...
Click to collapse
Thanks for your reply but I have already gone through this post but as I mentioned problem is that PC doesn't detects it even when I put the Tab in DL mode. Is there any method to root it? So that I could use Mobile Odin to restock it.

It is an usb-driver problem and not rooting, I'm 99% sure of it. It's the PC that HAS to find the Tab first.

Hmmmm
mr.natural said:
It is an usb-driver problem and not rooting, I'm 99% sure of it. It's the PC that HAS to find the Tab first.
Click to expand...
Click to collapse
I've tried on another PC and with another USB cable but in vain. Other Smartphones connect it without any problem.

Any smartphone or the P1000 are not the same. I have had on multiple occasions that even Samsung Kies did not recognise it and had to reinstall Kies. Same for the Samsung Mobile phones drivers. And don't forget to reboot your PC after installing drivers.
Keep on trying because it is still going into download mode and logic tells it should be accessible. Does the PC give a notification like driver not found or similar?

NO.
mr.natural said:
Any smartphone or the P1000 are not the same. I have had on multiple occasions that even Samsung Kies did not recognise it and had to reinstall Kies. Same for the Samsung Mobile phones drivers. And don't forget to reboot your PC after installing drivers.
Keep on trying because it is still going into download mode and logic tells it should be accessible. Does the PC give a notification like driver not found or similar?
Click to expand...
Click to collapse
No. There's no activity in PC when I connect it. It neither shows new hardware found nor any other notification like unrecognized device etc.
BTW I have reinstalled Kies, updated it, uninstalled it, installed separate drivers for Samsung USB but no gain...

One last option, let the battery become completely empty (0% charge). Recharge and try again, it rescued my tab once after a bad flash.
That is to my knowledge the last resort.

Alas!
mr.natural said:
One last option, let the battery become completely empty (0% charge). Recharge and try again, it rescued my tab once after a bad flash.
That is to my knowledge the last resort.
Click to expand...
Click to collapse
It didn't help...

adilpal said:
It didn't help...
Click to expand...
Click to collapse
What version of windows are you on? Because windows 8 is a *****, Vista or 7 should work.
(Or GNU-Linux). And have you tried Heimdall already? http://forum.xda-developers.com/showthread.php?t=1323527
Heimdall download https://code.google.com/p/heimdall-one-click/downloads/list

Get a stock ROM and how to use Heimdall (these are old instructions so there could be newer versions available).
-----------Heimdall install instructions ------------------
1. Download Heimdall.
2. Download Microsoft Visual C++ 2010 Redistributable Package (x86) and install it. Download it here List All Devices.
5. From the USB Device list chose "Samsung USB Composite DEvice".
6. Press "Install Driver", click "Yes" to the prompt and if you receive
a message about being unable to verify the publisher of the driver
click "Install this driver software anyway".
7. Done. This only needs to be done once.
-----------How to use Heimdall-------------------------
1. Put your tab into download mode - Power off Tab, once powered down hold power and the volume down button at the same time. You will see a android digging.
2. Start Heimdall
3. Hook your tab up to your PC or MAC and you will see a progress bar. That must say Ready to get heimdall to work.
4. Find you Firmware and unzip it until you see the following files below.
(NOTE: when you first unzip your firmware it may unzip into a .tar file unzip the .tar file to get the files below.)
a. Zimage
b. FactoryFS.rfs
c. Param.lfs
d. Boot.bin
e. SBL.bin - not always included
f. cacher.rfs
g. dbdata
h. modem.bin - not always included
5. Place each of those files in their correct spot and hit start.
ONE BIG NOTE: if you use a PIT file do NOT select repartition. It might brick your tab as heimdall has a problem when selecting repartition w/ a pit file. It is ok to use the pit file just make sure repartition is unchecked.
(Use ODIN for repartition with pit)

Got it working...
Thanks buddy, I bought a half dozen of USB cables for the tab and got it working with one of them at last... I don't know but I thought it was the last way out to try different cables... And at last, I got it working after long...
Please let me know the correct way of rooting, as DoomLord v. 4 has already failed to root it. Please guide if possible... I have a Ragers (Canada) Tab. GT-P1000R