dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
the problem is the phone wont recognize the simcard , everything else is normal.
Is that due to you installing a rom that does not have your network
in which case in the settings manually add your Networks details apn etc .
jje
Try see if your clockwordmod has any backups? Usually when doing changes it does make a full system backup..
If so, try restore from there, it should also restore imei
Not forgetting your backed up efs folder can be replaced if you did back it up most ignore that faq .
Mine came back with install of a new rom .
jje
areenchem said:
dear all
i have tried everything and i think i bricked my phone.
my phone have no iemi number and the firmware info are :
PDA : I9000JPJPG
Phone : Unknown
CSC : I9000OJPJPF
Odin wont recognize the download mode so i cant flash stock rom
the problem is the phone wont recognize the simcard , everything else is normal.
i have clockworkmod recovery, tried flashing different roms and radios still nothing. it also gives me baseband unkown. what should i do???
Click to expand...
Click to collapse
I had the same thing, I had to use the 3 button method and used Odin but remember that you have to have Odin running before you connect your phone to your USB connection and you should also have your phone in Download mode using the 3 button method before connecting it to your USB connection. Otherwise Odin won't recognise it, Also you need to make sure you have the phone drivers on you PC.
I just downloaded a stock firmware from samfirmware.com and that installed brought it back to how it was when I bought it. (Fully functional) and then I tried again with rooting it and lagfixing it. works fine.
The reason why mine died in the first place was because I didn't wait long enough on the first boot after the flash and I had thought it had frozen when it was really still just writing new information to the hardware so remember to be patient on the first boot after the flash.
It seems your phone Modem part is not flashed properly thus you could not retreive the IMEI from this part.
Suggestion:
Try to locate the original ROM which comes with this phone and flash it again and check if this works. From this start from zero
Couldn't you flash the modem via clockworktecovery if odin doesn't work? Much more simple if the missing modem is the problem. Modems can be found via docs thread.
Sent from my GT-I9000 using XDA App
lost IMEI
If you are not even getting Odin to connect to your phone, your bootloader must be corrupted. If the phone can get into APX mode, you can flash new bootloader and start off from there.
Connect device to Windows PC and see if Windows would detect the device to start with
Recently i rooted my Samsung Galaxy Tab(SGT) GT-p1000 that was brought from Singapore using the oneclickroot method.
My problem began when i heard about using heimdall to flash custom ROMS on the SGT. So i downloaded the Heimdall files and used heimdall frontend to attempt to root my SGT. Before that i had already used the zadig files to install the samsung composite USB driver. However as i boot my SGT into download mood, i accidentally pressed start to flash into my SGT with only the zimage and a wrongly selected Factoryfs file, These were taken from the BOCA rom I wanted to try to install.
Then i think i went into Boca's bootloader but i couldnt do anything. So i tried to reboot the device but it couldnt boot anymore. Just showed and android with an Exclamation mark. So i saw this thread http://forum.xda-developers.com/showthread.php?t=966015 and i thought that maybe i could use heimdall to flash back the default files. So i reflashed the new FactoryFS Zimage and Param.ifs provided by this new rom.
Now i can boot the phone normally into froyo 2.21, however now everytime i press the lock button the phone retarts. And everytime i try to connect to the internet using WiFi my phone restarts as well. 3g no longer works too. T_T
I can no longer connect to Kies and i tried reinstalling the drivers again but nothing would fix it. I cant use Heimdall or Odin to flash it anymore, Heimdall faced error -12 and Odin just kept trying to secure connection, but it never passes that point.
IM REALLY LOST AS TO WHAT TO DO. SOMEBODY HELP ME!!! PLEASE!
ADB
1-char
dirlan2001 said:
ADB
1-char
Click to expand...
Click to collapse
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
rafaeker19 said:
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
Click to expand...
Click to collapse
Hmmm... Odin doesn't get connected , so ....
Probably Heimdall will also do the flash for you - Odin is just one Windows-based tool to flash that device. Heimdall should have the same features for differnt platforms (so you can use it also on MAC OSX and Linux)- give Overcome a trial - and don't forget to flash the modem, if you want a fully working device
Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal
LaDjA said:
just the first time on this device).
Click to expand...
Click to collapse
since its the first time on this device, can you check IF sim card is inserted in the correct direction
Check this out! You , YES! you are an " Android ". Not your phone but U.
Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.
LaDjA said:
Yes. It is.
Might be also worth mentioning that I tried it with a few different cards, all of which work with other devices, and not with this one.
Click to expand...
Click to collapse
you can try taking it back to stock ROM , you can follow this but it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced. so best to test with Stock ROM to check if its a software or hardware problem. also try to flash without SIM card and insert after flashing and first boot.
Check this out! You , YES! you are an " Android ". Not your phone but U.
LaDjA said:
Hello.
I recently installed CM10.1.3 on my GT-I9000 running stock GB. I did everything according to the instructions (though, mind you, this was not my first time installing a ROM just the first time on this device).
When I booted and tried to set up a CM account it gave me a message saying "Insert SIM card". I tried installing the kernel again, as well as installing other ROMs (AOKP mostly).
Nothing seems to work. It will simply not recognize my SIM.
Any suggestions?
Thanks!
Tal
Click to expand...
Click to collapse
For a clean install and root, flash JVU ROM and its CF_root, as it is easy and problem free. I never had any problem with JVU
The whole procedure is given below
FLASHING JVU ROM WITH ODIN v1.85:
1. Install USB drivers for i9000 on PC (ignore if already installed) and restart computer to take effect
2. Turn off your phone and put it in download mode
by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so
continue..if not do it again...
3. Plug in Phone with USB Cable To Computer.
4. In ID:COM it should go yellow and you should see
ADDED in the message box
5. Check Re-Partition option and then Click PIT
button to select: s1_odin_20100xxx.pit file.
6. Click PDA button and select :
CODE_I9000XXJVU_xxxxx.tar
7. Click PHONE button and select:
MODEM_I9000XXJVU_xxxxx.tar
8. Click CSC button and select:
GT-I9000-CSC-MULTI-OXAJVU.tar
9. When you have all the files needed in ODIN,
Click Start and let it Run
10. Once complete you will see S logo on phone
(computer will make a few noises like connect/
disconnecting
11.Unplug the Cable to the Phone
You will see your phone working excellent. Now it's time for rooting
Procedure for rooting:
1. Power Off Phone
2. Download CF-Root kernel first.
Unzip the file to a folder. You
will get the .tar file – CF-Root-
XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
— inside the extracted folder. DO NOT extract
the .tar file (even if you see it as a zip
file, which it is not). You need to flash
the .tar file using Odin to gain root
access and install the ClockworkMod
Recovery (CWM) alongside. If you’re
getting zimage file, it means you’ve
extracted the .tar file too! — and that’s
not a right thing to do.
3. Boot your phone in Download Mode —
Press and hold volume down+HOME
+POWER keys together.
4. Open Odin now. Connect your phone to PC now. You’ll notice “Added! !” message in the Odin’s message box in the bottom left.
5. On Odin, click the PDA tab and select the .tar file you got in step 2 — CF-Root-XX_OXA_JVU_2.3.6-v4.3-
CWM3RFS.tar
6. Make sure “Re-Partition” checkbox is not selected. Leave the “Auto Reboot” and “F. Reset Time” checkboxes selected.
7. Click the Start button on Odin to flash the CF-Root kernel. After the CF Root is installed, phone will restart automatically. When you see the PASS written in top left box, you can remove the cable.
8. Your phone is rooted now. That surperuser app is there! The CWM app is also there, and
clockworkmod based recovery has
been installed too. Now you enter the custom ROM world without worries. Enjoy!
PIT File DOWNLOAD Iink: www.mediafire.com/download/v2rub40k1bvccj4/s1_odin_20100512.pit
ODIN 1.85 download link:
www.mediafire.com/download/82latn22s1kl7w2/andromint-Odin3-v1.85.zip
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
CF_root download link:
download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
If you don't have USB drivers, then download below
Samsung USB drivers:
www.mediafire.com/?hzlnda0l5t8qyes
xsenman said:
it sounds like you may have hardware problem, if that fails as sim contacts can get broken or damaged too and can be replaced.
Click to expand...
Click to collapse
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)?
xsenman said:
you can try taking it back to stock ROM , you can follow this
Click to expand...
Click to collapse
In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Rohitdahiya said:
XXJVU Download link:
(password: samfirmware.com)
hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Click to expand...
Click to collapse
The password doesn't match, or so peazip says. I can't get the file to extract.
Thank a lot, guys, for all your efforts.
LaDjA said:
But the hardware was functioning perfectly well before I flashed. Why would flashing a ROM damage my SIM contacts? (or any hardware, for that matter)? In this guide, when I am trying to download the PIT file, it wants me to log in with my google\facebook account. Something about that smells fishy. Are you sure it's reliable enough? Alternatively - could you provide a different download link for the file?
Click to expand...
Click to collapse
I assume you have a software issue, that's why I asked you to revert to Stock ROM after you confirmed the SIM card was not inserted the wrong way round. , only IF the sock ROM also gave you that result than you need to consider hardware, as I have not heard of anyone having this issue after flashing CM 10.
AS for PIT file its in 4Shared site, all they would require is you should be a member and register with them ( you can do that with any name and password) the ROM site is FileRio, there you should only use free download button , clicked a number of times ( same button) for download to begin, both uploads were by me, so its virus free. I will upload pit file to the thread asap as its very small file.
EDIT: already uploaded PIT File to thread uploaded 3 PIT files in a package used for i9000, only use 512
Check this out! You , YES! you are an " Android ". Not your phone but U.
Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?
LaDjA said:
Hey. Thanks again.
One more problem, and it's a big one:
Odin won't respond to my device. No yellow rectangle, or any kind of response...
What can I do to make it realize that it's there?
Click to expand...
Click to collapse
the guide to solve such problems is right on top (begining) of that thread
Note:- It's assumed that you can and know how to connect your Phone to PC with USB cable . If you do not know, first install Samsung USB drivers on your PC/Laptop, than enable USB debugging on your phone by settings menu>Developer options> tick USB Debugging. After this use only Samsung USB cable and plug it into your phone micro USB port and to your PC USB Port. ( Always use the Back USB port on PC as some ports may not connect well enough for flashing ROM's. )
If unable to connect your phone to PC for any reason, refer to this guide
Click to expand...
Click to collapse
Check this out! You , YES! you are an " Android ". Not your phone but U.
I tried everything in that guide, and it still the same.
Might be worth noting that the computer totally does recognize the device. I mean, I can access the internal SD from the computer, when the phone is on. It's just that when I connect it in download mode, Odin doesn't respond.
Might also be worth to stress that I used Heimdall to flash the recovery, when I did it. Could it be related to why I can't use Odin now?
And another thing regarding my main issue - could the "Insert SIM" message be a modem thing?
The password for XXJVU is samfirmware.com
If you are still unable to open this, then download XXJVU by Google searching and then try. This is the best way to get rid of the problem.
If you are able to go to download mode, install USB drivers for Samsung and restart PC . Now exit the Kies program and its related services from your PC. If you are using windows, you may find the tray icon and exit by right clicking. Now run Odin and flash.
If you are not able to go to download mode then search "homemade usb jig" and use the jig method described in those threads.
I'm trying to download the XXJVU again. Will see how goes.
I am able to go to download mode. So that's not it. I also don't have Kies installed on my computer, so that's also not it. I installed a few different Samsung drivers, and did the whole process a few times. The computer always recognizes the phone, but Odin doesn't.
I don't get why I can't delete stuff, if I accidentally posted twice. Anyway - feel free to disregard this one. Sorry for spamming..
OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?
LaDjA said:
OK. Managed to open the XXJVU.
Still have the problem with Odin not paying attention to my phone being there. Do you think it might be a problem with dl mode, that I should try fix with a jig (the phone does act LIKE it in dl mode - yellow triangle and all...)?
Click to expand...
Click to collapse
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
You seem to be having strange problems. I assume you pressed the correct combo keys ( as shown in image on that thread) and you did not get download mode ( this could be due to ) you don't have an i9000 but a different version of Galaxy S? or your keys are not functioning or you have a wrong bootloader
Click to expand...
Click to collapse
You assume correctly - I did use the correct combo. And the battery says I have an GT-I9000. I think that's only the int'l version, isn't it?
xsenman said:
so use this methods & tool from PC to boot into download mode after you are sure you have an i9000 international version by checking under the battery. just to give you an idea , read this
Odin will only connect when phone is in Download mode, so as you mentioned you have NO problem with drivers and PC, its only your phone not being able to enter download mode.
Click to expand...
Click to collapse
I will try the ADB solution tomorrow. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Thanks!
LaDjA said:
. But doesn't the fact that the phone displays the download mode screen say that it is indeed in that mode? (because it does display it, as I mentioned above). I mean - is it possible that the phone seems like it is in download mode, when it's actually not?
Click to expand...
Click to collapse
hmm, i got the impression that you are not getting the download mode display , if it does than it is in download mode, so now you need to check your Odin3 download, what version are you using , try and download again and always use fresh Odin3, meaning, if it had a problem or even when no problem restart it a fresh. And best install Samsung USB drivers again ( link on that thread), if that did not solve it.
Check this out! You , YES! you are an " Android ". Not your phone but U.
I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.
LaDjA said:
I tried both versions that from here (i.e. v1.83 and v1.85). I'm not really doing anything else with Odin, so there's nothing to restart.
I also tried uninstalling and installing the drivers a few times, using a few different installation files, and by letting windows figure out on its own which drivers to install.
Non of it changed the result.
Click to expand...
Click to collapse
this is weird, anyway since heimdall is possible, right? try and download a heimdall rescue kit from MY Android collections and try flashing , if the phone boots you can also install Mobile Odin from playstore to flash stock ROM too.
Check this out! You , YES! you are an " Android ". Not your phone but U.
hello m8's
Long story short: my beautiful international version GT-I8910 has died on manual update of firmware. I have never tried to update to other rom's, custom or no custom, i never tried USB Debugging, recovery or anything else. The phone is stuck at : see picture 1, i am not able to get into recovery, in kies update i'm beeing asked for recovery code, only can acces Download Mode. I'v tried another stock rom from sammobile.com, i've tried every wipe etc. On Odin i got this error: see pic. 2. In Download Mode somewere in the left down corner i had "HW REV : 0x5""
Ooo..and Odin give my FAIL.see pic 3
Guys..i'm crying..please help...
are you flashing the correct firmware from sammobile, if not will fail, try a different usb port & make sure fone is recognised in "ID:COM" window & flash as pda
i'm flashing the correct rom...in odin it says Added...at sistem.img write give me Fail error... (
LE: 1) Is there a way to do a full system, app and file backup using adb commands? 2) Is it possible to enable USB Debugging via methods using adb commands?
alex1982 said:
hello m8's
Long story short: my beautiful international version GT-I8910 has died on manual update of firmware. I have never tried to update to other rom's, custom or no custom, i never tried USB Debugging, recovery or anything else. The phone is stuck at : see picture 1, i am not able to get into recovery, in kies update i'm beeing asked for recovery code, only can acces Download Mode. I'v tried another stock rom from sammobile.com, i've tried every wipe etc. On Odin i got this error: see pic. 2. In Download Mode somewere in the left down corner i had "HW REV : 0x5""
Ooo..and Odin give my FAIL.see pic 3
Guys..i'm crying..please help...
Click to expand...
Click to collapse
Bring to the Samsung Service Center, and pay for it.
Hi,
After install TWRP from Odin my Note 9 was stay on bootlop 'Samsung Logo' and restarting, i can't go to Download Mode and Recovery but phone only restarting bootloop.
It happend after install wrong twrp files (\twrp-3.3.1-1-star2qltechn.img.tar) i have select on Odin "Rebooting"
What's going now? Regards Thank you for help
Recovery and Download doesn't work, i can't going to him.... only restarting *****
VIDEO: https:// streamable.com/k242c
You may have to try restore stock firmware using odin. Did u try this method to get into download mode? Disconnect the USB cable from ur phone but keep the cable plugged into your computer. Then hold down Bixby+Vol Down and then plug the usb cable in.
Its not possible but before install wrong twrp i has selected options "Nand erase" and "Auto Rebooting"
OK...
Not to be a ****, but.....
Welcome to Bricksville, population - you...
IF, and it's a big if, you can get your hands on a download mode dongle it might, not 100% sure, but just might get you into download mode if you haven't deleted the bootloader completely...
You will need a micro-usb to usb c dongle as well...
I haven't tried this on my Note 9 but it might work...
Then you should be able to flash stock rom (make sure it is your stock rom with matching CSC and everything) through ODIN, DON'T tick NAND erase as this might/will delete your IMEI (if you haven't done so already)...
Good luck...