Xposed modules don't recognize that xposed is active - Xposed General

Hi, I just installed xposed v86 for arm on my wiki pulp 4g with success, but modules don't see that xposed is active and tell me: "activate me in xposed". I tried both soft reboot and complete reboot, but nothing happened. Can someone help me? Thanks in advance

Matteo Gamba said:
Hi, I just installed xposed v86 for arm on my wiki pulp 4g with success, but modules don't see that xposed is active and tell me: "activate me in xposed". I tried both soft reboot and complete reboot, but nothing happened. Can someone help me? Thanks in advance
Click to expand...
Click to collapse
You have gone to "Modules" in the Xposed installer app and made sure to check the check boxes for each module and then rebooted?
Sent from my SCH-R220

mattzeller said:
You have gone to "Modules" in the Xposed installer app and made sure to check the check boxes for each module and then rebooted?
Click to expand...
Click to collapse
Of course Yes, here Is the screen:

Matteo Gamba said:
Of course Yes, here Is the screen:
Click to expand...
Click to collapse
I figured you did, I just wanted to make sure. Post the log from Xposed so we can see where the problem possibly is
Sent from my SCH-R220

mattzeller said:
I figured you did, I just wanted to make sure. Post the log from Xposed so we can see where the problem possibly is
Click to expand...
Click to collapse
Here you are:

Matteo Gamba said:
Here you are:
Click to expand...
Click to collapse
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Sent from my SCH-R220

mattzeller said:
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Click to expand...
Click to collapse
My device Is pure aosp, not touchwiz. Wiko uses MyOS that include only a Launcher. I'll try v85 and v84 and i'll Save logs. Thanks for helping me

mattzeller said:
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Click to expand...
Click to collapse
I tried even v72 but dont work, modulez dont work.

Matteo Gamba said:
I tried even v72 but dont work, modulez dont work.
Click to expand...
Click to collapse
Have you checked the thread for your particular device?
Sent from my SCH-R220

mattzeller said:
Have you checked the thread for your particular device?
Click to expand...
Click to collapse
My device isn't present

Matteo Gamba said:
My device isn't present
Click to expand...
Click to collapse
After doing a Google search for Wiko Pulp 4G Xposed, the very first link has a write up on XDA to install TWRP AND Xposed
http://forum.xda-developers.com/general/general/guide-wiko-pulp-4g-pulp-fab-4g-root-t3436580
Sent from my SCH-R220

mattzeller said:
After doing a Google search for Wiko Pulp 4G Xposed, the very first link has a write up on XDA to install TWRP AND Xposed
http://forum.xda-developers.com/general/general/guide-wiko-pulp-4g-pulp-fab-4g-root-t3436580
Click to expand...
Click to collapse
Already tried it, it's the v86 version. It don't work :/

Related

Not Working on My Honor2 Stock 4.2 EMUI ROM

Xposed is not working on My Huawei Honor2 Stock 4.2 EMUI ROM. Log is also attached
Did you reboot? If so, check the Xposed logs.
GermainZ said:
Did you reboot? If so, check the Xposed logs.
Click to expand...
Click to collapse
I did reboot. Log is also attached
binoj.6066 said:
I did reboot. Log is also attached
Click to expand...
Click to collapse
Search before posting and check the FAQ first next time. Here's your answer.

[Solved] Center clock on stock(based) roms

Is this possible? Specially for virginity rom because its one hell of a rom but i cant seem to do it. Xposed/gravity box doesnt work for some reason, i cant do anything related to clock with any xposed module. Anyone knows why or has any ideas?
heithered said:
Is this possible? Specially for virginity rom because its one hell of a rom but i cant seem to do it. Xposed/gravity box doesnt work for some reason, i cant do anything related to clock with any xposed module. Anyone knows why or has any ideas?
Click to expand...
Click to collapse
Try xblast tools module instead
I remember trying it with no luck but will try again soon. Thanks though.
mauam said:
Try xblast tools module instead
Click to expand...
Click to collapse
Tested xblast tools with stock, no luck. Also tries android theme engine but that didnt work either. Any other ideas?
Edit: ok made it work. Thanks!
heithered said:
Tested xblast tools with stock, no luck. Also tries android theme engine but that didnt work either. Any other ideas?
Edit: ok made it work. Thanks!
Click to expand...
Click to collapse
try gravity box
Ahmed.ragab said:
try gravity box
Click to expand...
Click to collapse
No, you try reading first post
​
heithered said:
No, you try reading first post
Click to expand...
Click to collapse
haha didn't see that
Ahmed.ragab said:
​
haha didn't see that
Click to expand...
Click to collapse
Heh
Since xblast tools solved my problem i edited the title.
heithered said:
Heh
Since xblast tools solved my problem i edited the title.
Click to expand...
Click to collapse
good to hear

{{GUIDE}}DEBUGGING Xposed Installation

Here you are..many of you had issues installing XPOSED on your LOLLIPOP device..Let me give you a short guide on the installation process
This guide is not made by me
All credits goes to @faslane
Thank him for this
Thanku @rovo89 for making Xposed work on ART
Thanku all devs and members who participated on the DISCUSSION thread who helps us solve the issues on our devices
I am starting the thread because many of you have issues in installing and enabling the framework..and its tiresome to search for the solution on the DISCUSSION thread
So let's start
NB:Make a Nandroid Backup before making changes
Don't blame me for broken devices
Download both the apk and the Zip from http://forum.xda-developers.com/showthread.php?p=58828974
1) Install the APK
2) Install SELinuxModeChanger from Play Store. Link:https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en
3) Start SELinuxModeChanger and switch to permissive.
4) Flash the ZIP through recovery (TWRP recommended)
5) Start the XPOSED UI and choose soft reboot option.((It might show that Xposed is not active but it works anyway))
6.Download any working module and test
This works on most of the devices and give it a try..This might solve your issue for good
NB:For Nexus 5 and some other devices you may need to have a soft reboot after every boot/reboot for the XPOSED to work properly
I've also posted it several times in its respective thread. So people WOULD search. Its the least they can do since I took the time to write it and helped a few hundred people at least.
faslane said:
I've also posted it several times in its respective thread. So people WOULD search. Its the least they can do since I took the time to write it and helped a few hundred people at least.
Click to expand...
Click to collapse
I have seen them posting again and again on the thread thats why I made this
And I have already mentioned you in the thread..So no issues
I just tried to help a few people that's all
vaisakh7 said:
I have seen them posting again and again on the thread thats why I made this
And I have already mentioned you in the thread..So no issues
I just tried to help a few people that's all
Click to expand...
Click to collapse
And THANK YOU! for doing so... +1 bro! no worries at all. Glad ya did
Fas
vaisakh7 said:
.......
5) Start the XPOSED UI and choose soft reboot option.((It might show that Xposed is not active but it works anyway))
6.Download any working module and test
[/COLOR][/SIZE][/FONT]
This works on most of the devices and give it a try..This might solve your issue for good
Click to expand...
Click to collapse
Lots of people aren't aware that xposed might not read selinux as permissive because of the kernel settings /bootsequence
Perhaps add something like this:
7. Most likely you'll have to repeat Nr 5 every time you boot/reboot your device to keep xposed working.
Or make a note on Nr 5:
To get xposed to work: a soft reboot needs to be done after every boot/reboot in order for xposed to read selinux as permissive.
Hello, this thread is the most helpful (on the official I don't understand for be honest)
But what can I have to do with the second files in the op (XposedBridgeApi-20150213.jar) for the apk and the zip I know what I have to do but with this last....
Thanks
dkonect said:
Hello, this thread is the most helpful (on the official I don't understand for be honest)
But what can I have to do with the second files in the op (XposedBridgeApi-20150213.jar) for the apk and the zip I know what I have to do but with this last....
Thanks
Click to expand...
Click to collapse
You won't need the file((XposedBridgeApi-20150213.jar)).It is for MODULE builders.
You have nothing to do with that file unless you're a dev and is planning to work on that :thumbup:
Don't type in thanks..for that you have a thanks button :thumbup:
Tapped from my furious ZR
I have that problem, LinuxMode automatically changed to enforcing without me. ;cc
Example after reboot.
Rygiel98 said:
I have that problem, LinuxMode automatically changed to enforcing without me. ;cc
Example after reboot.
Click to expand...
Click to collapse
You should do a soft reboot after every hard reboot for the framework to work
Tapped from my furious ZR
Yea, i must do soft reboot after every normal reboot. Is there a way to don't this? ;/
Rygiel98 said:
Yea, i must do soft reboot after every normal reboot. Is there a way to don't this? ;/
Click to expand...
Click to collapse
No :thumbdown:
You will have to do this until @rovo89 makes a new build
Tapped from my furious ZR
Is this not compatible with Moto X (ghost)? After flashing file and installing .apk, Installer shows app_process active -- andn XposedBridge.jar active 61. Any advice? Thanks.
jeraspie28 said:
Is this not compatible with Moto X (ghost)? After flashing file and installing .apk, Installer shows app_process active -- andn XposedBridge.jar active 61. Any advice? Thanks.
Click to expand...
Click to collapse
That means Xposed active.
Install a module and soft reboot :thumbup:
Tapped from my furious ZR
vaisakh7 said:
That means Xposed active.
Install a module and soft reboot :thumbup:
Tapped from my furious ZR
Click to expand...
Click to collapse
Still says Xposed not active. What's throwing me is 'app_process active --' as in 0 or null. All the screen shots I've seen show something like 20. SE Linus mode is set to Permissive.
jeraspie28 said:
Still says Xposed not active. What's throwing me is 'app_process active --' as in 0 or null. All the screen shots I've seen show something like 20. SE Linus mode is set to Permissive.
Click to expand...
Click to collapse
20??
Then probably you have the wrong version installed..
The XposedBridgeApi should show 61.
Tapped from my furious ZR
vaisakh7 said:
20??
Then probably you have the wrong version installed..
The XposedBridgeApi should show 61.
Tapped from my furious ZR
Click to expand...
Click to collapse
What should 'app_process' number show?
jeraspie28 said:
What should 'app_process' number show?
Click to expand...
Click to collapse
-- --
Tapped from my furious ZR
When I flash the zip xposed says it's still not active and the models still won't work any suggestions?
mrgwap said:
When I flash the zip xposed says it's still not active and the models still won't work any suggestions?
Click to expand...
Click to collapse
What device?
Stock rom?
Which firmware??
Tapped from my furious ZR
Nexus 6 crdroid with Franco kernel
---------- Post added at 05:25 AM ---------- Previous post was at 05:23 AM ----------
vaisakh7 said:
What device?
Stock rom?
Which firmware??
Tapped from my furious ZR
Click to expand...
Click to collapse
Nexus 6 crdroid Franco kernel Android 5.0.2

Framework Instaled then Boot loop

Hello,
i Have Samsung s6 SM-G925F with Android version Lolipop 5.1.1. (arm64-v8a).
i rooted My Phone => i Instaled TWRP => Backup =>then i Instaled "XtreStLite_ROM_v2.4_Deo-Mod-Edition_XXU3coi9_...." => then i Instaled Xpsed installer, it say Framework not Installed, i Download and flashed Succesfully the "xposed-v86-sdk22-arm64.zip" but the Problem i stay on Boot Loop => i do a recovery, i did this process with different ROM's.
what did i wrong?
My Goal => install the framework to download and unse the Module Mock Mock location. if this rom is not compatible with xposed then i will unse any other rom that work with it, i heared i neeeded a Deoxed ROM for my goals (fake, fake gps on Pokemons go).
any Help will be apreciated
I have the exact same issue. I would appreciate help as well.
@hisch use Wanam's version of Xposed http://forum.xda-developers.com/showthread.php?t=3180960
@zawey if you have the same phone and version of Android, you use it too
mattzeller said:
@hisch use Wanam's version of Xposed http://forum.xda-developers.com/showthread.php?t=3180960
@zawey if you have the same phone and version of Android, you use it too
Click to expand...
Click to collapse
I have the same phone but not the same version. I have 6.0.1 Can I still use it?
zawey said:
I actually have 6.0.1 Can I still use it?
Click to expand...
Click to collapse
Absolutely, take a look at the thread, works on stock 5.1 & 6 TW ROMs odex or deodex
mattzeller said:
Absolutely, take a look at the thread, works on stock 5.1 & 6 TW ROMs odex or deodex
Click to expand...
Click to collapse
Will try it right now then. Thanks for the answer. Really appreciate it
zawey said:
Will try it right now then. Thanks for the answer. Really appreciate it
Click to expand...
Click to collapse
Np, post back if it works or not
mattzeller said:
Np, post back if it works or not
Click to expand...
Click to collapse
It worked perfectly. I got it installed, my phone didn't get stuck in a bootloop and I checked Xposed Installer and it says that I have the framework. Thank you very much for the help!
zawey said:
It worked perfectly. I got it installed, my phone didn't get stuck in a bootloop and I checked Xposed Installer and it says that I have the framwork. Thank you very much for the help!
Click to expand...
Click to collapse
No problem, glad I could help

Xposed problem

I installed xposed AND it works fine ....... but when i active xposed module it takes 4 mins. to reboot my device. Normally (without active xposed module) it takes 35s to reboot.
apon123 said:
I installed xposed AND it works fine ....... but when i active xposed module it takes 4 mins. to reboot my device. Normally (without active xposed module) it takes 35s to reboot.
Click to expand...
Click to collapse
Wait for official xposed
Still_living714 said:
Wait for official xposed
Click to expand...
Click to collapse
My device is android 4.4.4 the xposed is official !!!!!!!!
apon123 said:
My device is android 4.4.4 the xposed is official !!!!!!!!
Click to expand...
Click to collapse
Disable all modules and activate one by one and see which is causing problems
Still_living714 said:
Disable all modules and activate one by one and see which is causing problems
Click to expand...
Click to collapse
ok i am trying!!!!!!!!!!!
apon123 said:
ok i am trying!!!!!!!!!!!
Click to expand...
Click to collapse
I found the provlem!!!! it is lucky patcher!!!! how can I solve it!!!!!!!
apon123 said:
I found the provlem!!!! it is lucky patcher!!!! how can I solve it!!!!!!!
Click to expand...
Click to collapse
Due to some of the capabilities of Lucky Patcher, discussing it is forbidden on XDA. Simply mentioning it is likely to get you flamed.

Categories

Resources