Database Develop

Not Working on My Honor2 Stock 4.2 EMUI ROM

Xposed is not working on My Huawei Honor2 Stock 4.2 EMUI ROM. Log is also attached

Did you reboot? If so, check the Xposed logs.

GermainZ said:
Did you reboot? If so, check the Xposed logs.
Click to expand...
Click to collapse
I did reboot. Log is also attached

binoj.6066 said:
I did reboot. Log is also attached
Click to expand...
Click to collapse
Search before posting and check the FAQ first next time. Here's your answer.

xposed is here

http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
go flash

Not working for me. Anyone get it to work on the N6?

Nobody with an N6 has reported it working so far in the Xposed thread. Kinda frustrating that the most important Android phone out is the only one that can't seem to get it going.

Rovo89 says, Note that this is still an alpha version and for Lollipop on ARMv7+ devices only. Please install it only if you're willing to take the risk of boot loops. Just because it's working fine and stable for me doesn't mean it will work for everyone the same way.

Sane1 said:
Not working for me. Anyone get it to work on the N6?
Click to expand...
Click to collapse
nope not here but wont be long by the looks of it

There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.

stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
See thread in n6 general. Yea you have to soft reboot to have xposed run after you are in permissive mode for selinux. Its the only way right now. If you full reboot, xposed runs before selinux is permissive

Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else

stacio88 said:
There's a second upload that works on the n6. Check the op. But it only works after a soft reboot for me, if I do a full reboot it won't work.
Click to expand...
Click to collapse
That's likely your kernel not allowing it to write to system. I could be wrong though but this happened to me on jellybean.

troyd28 said:
Would love to have it was excited now disappointed. Owell guess I'll wait it out along with everyone else
Click to expand...
Click to collapse
Works great what's up with yours

Can't find the second link that works on the nexus 6

Jeremiah_1988 said:
Can't find the second link that works on the nexus 6
Click to expand...
Click to collapse
You don't need a second link download the two files. Download selinux make sure you set permissions to permissive. Boot into recovery flash framework, boot up install xposed, reboot into recovery again install framework. If it does not active do a soft reboot in xposed
Sent from my Nexus 6 using XDA Free mobile app

What modules are actually working on our gadget please?

I got RootCloak working. To verify this I opened Soft Card before Xposed was installed and it detected root. After Xposed was installed, I then installed RootCloak, checked the box in modules, added Soft Card in the app. Then I went back to Xposed and did a soft reboot. Then I rechecked Soft Card and it worked!

marvi0 said:
What modules are actually working on our gadget please?
Click to expand...
Click to collapse
i got youtube away and gel settings there the only ones ive tried so far

Crappalinks works.

jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
brizey said:
Crappalinks works.
Click to expand...
Click to collapse
Great that's a good start at least. Haven't used exposed for so long, so got used to not having it.

jaythenut said:
Works great what's up with yours
Click to expand...
Click to collapse
Didn't install it yet. It seems to be a process besides most features I used were implemented on lollipop so I shall wait.

jaythenut said:
i got youtube away and gel settings there the only ones ive tried so far
Click to expand...
Click to collapse
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app

stafly17 said:
Any one get the app DPI settings mod to work.??? Only thing I'm interested in from closed at the moment.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
It works, but I did not get the results I wanted. It may be the way lollipop handles things, but i tried to get the tablet style settings by picking a high resolution and it worked but was all crammed in the middle. So...the xposed module works, but lollipop may give you some trouble.

{{GUIDE}}DEBUGGING Xposed Installation

Here you are..many of you had issues installing XPOSED on your LOLLIPOP device..Let me give you a short guide on the installation process
This guide is not made by me
All credits goes to @faslane
Thank him for this
Thanku @rovo89 for making Xposed work on ART
Thanku all devs and members who participated on the DISCUSSION thread who helps us solve the issues on our devices
I am starting the thread because many of you have issues in installing and enabling the framework..and its tiresome to search for the solution on the DISCUSSION thread
So let's start
NB:Make a Nandroid Backup before making changes
Don't blame me for broken devices
Download both the apk and the Zip from http://forum.xda-developers.com/showthread.php?p=58828974
1) Install the APK
2) Install SELinuxModeChanger from Play Store. Link:https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en
3) Start SELinuxModeChanger and switch to permissive.
4) Flash the ZIP through recovery (TWRP recommended)
5) Start the XPOSED UI and choose soft reboot option.((It might show that Xposed is not active but it works anyway))
6.Download any working module and test
This works on most of the devices and give it a try..This might solve your issue for good
NB:For Nexus 5 and some other devices you may need to have a soft reboot after every boot/reboot for the XPOSED to work properly

I've also posted it several times in its respective thread. So people WOULD search. Its the least they can do since I took the time to write it and helped a few hundred people at least.

faslane said:
I've also posted it several times in its respective thread. So people WOULD search. Its the least they can do since I took the time to write it and helped a few hundred people at least.
Click to expand...
Click to collapse
I have seen them posting again and again on the thread thats why I made this
And I have already mentioned you in the thread..So no issues
I just tried to help a few people that's all

vaisakh7 said:
I have seen them posting again and again on the thread thats why I made this
And I have already mentioned you in the thread..So no issues
I just tried to help a few people that's all
Click to expand...
Click to collapse
And THANK YOU! for doing so... +1 bro! no worries at all. Glad ya did
Fas

vaisakh7 said:
.......
5) Start the XPOSED UI and choose soft reboot option.((It might show that Xposed is not active but it works anyway))
6.Download any working module and test
[/COLOR][/SIZE][/FONT]
This works on most of the devices and give it a try..This might solve your issue for good
Click to expand...
Click to collapse
Lots of people aren't aware that xposed might not read selinux as permissive because of the kernel settings /bootsequence
Perhaps add something like this:
7. Most likely you'll have to repeat Nr 5 every time you boot/reboot your device to keep xposed working.
Or make a note on Nr 5:
To get xposed to work: a soft reboot needs to be done after every boot/reboot in order for xposed to read selinux as permissive.

Hello, this thread is the most helpful (on the official I don't understand for be honest)
But what can I have to do with the second files in the op (XposedBridgeApi-20150213.jar) for the apk and the zip I know what I have to do but with this last....
Thanks

dkonect said:
Hello, this thread is the most helpful (on the official I don't understand for be honest)
But what can I have to do with the second files in the op (XposedBridgeApi-20150213.jar) for the apk and the zip I know what I have to do but with this last....
Thanks
Click to expand...
Click to collapse
You won't need the file((XposedBridgeApi-20150213.jar)).It is for MODULE builders.
You have nothing to do with that file unless you're a dev and is planning to work on that :thumbup:
Don't type in thanks..for that you have a thanks button :thumbup:
Tapped from my furious ZR

I have that problem, LinuxMode automatically changed to enforcing without me. ;cc
Example after reboot.

Rygiel98 said:
I have that problem, LinuxMode automatically changed to enforcing without me. ;cc
Example after reboot.
Click to expand...
Click to collapse
You should do a soft reboot after every hard reboot for the framework to work
Tapped from my furious ZR

Yea, i must do soft reboot after every normal reboot. Is there a way to don't this? ;/

Rygiel98 said:
Yea, i must do soft reboot after every normal reboot. Is there a way to don't this? ;/
Click to expand...
Click to collapse
No :thumbdown:
You will have to do this until @rovo89 makes a new build
Tapped from my furious ZR

Is this not compatible with Moto X (ghost)? After flashing file and installing .apk, Installer shows app_process active -- andn XposedBridge.jar active 61. Any advice? Thanks.

jeraspie28 said:
Is this not compatible with Moto X (ghost)? After flashing file and installing .apk, Installer shows app_process active -- andn XposedBridge.jar active 61. Any advice? Thanks.
Click to expand...
Click to collapse
That means Xposed active.
Install a module and soft reboot :thumbup:
Tapped from my furious ZR

vaisakh7 said:
That means Xposed active.
Install a module and soft reboot :thumbup:
Tapped from my furious ZR
Click to expand...
Click to collapse
Still says Xposed not active. What's throwing me is 'app_process active --' as in 0 or null. All the screen shots I've seen show something like 20. SE Linus mode is set to Permissive.

jeraspie28 said:
Still says Xposed not active. What's throwing me is 'app_process active --' as in 0 or null. All the screen shots I've seen show something like 20. SE Linus mode is set to Permissive.
Click to expand...
Click to collapse
20??
Then probably you have the wrong version installed..
The XposedBridgeApi should show 61.
Tapped from my furious ZR

vaisakh7 said:
20??
Then probably you have the wrong version installed..
The XposedBridgeApi should show 61.
Tapped from my furious ZR
Click to expand...
Click to collapse
What should 'app_process' number show?

jeraspie28 said:
What should 'app_process' number show?
Click to expand...
Click to collapse
-- --
Tapped from my furious ZR

When I flash the zip xposed says it's still not active and the models still won't work any suggestions?

mrgwap said:
When I flash the zip xposed says it's still not active and the models still won't work any suggestions?
Click to expand...
Click to collapse
What device?
Stock rom?
Which firmware??
Tapped from my furious ZR

Nexus 6 crdroid with Franco kernel
---------- Post added at 05:25 AM ---------- Previous post was at 05:23 AM ----------
vaisakh7 said:
What device?
Stock rom?
Which firmware??
Tapped from my furious ZR
Click to expand...
Click to collapse
Nexus 6 crdroid Franco kernel Android 5.0.2

Xposed modules don't recognize that xposed is active

Hi, I just installed xposed v86 for arm on my wiki pulp 4g with success, but modules don't see that xposed is active and tell me: "activate me in xposed". I tried both soft reboot and complete reboot, but nothing happened. Can someone help me? Thanks in advance

Matteo Gamba said:
Hi, I just installed xposed v86 for arm on my wiki pulp 4g with success, but modules don't see that xposed is active and tell me: "activate me in xposed". I tried both soft reboot and complete reboot, but nothing happened. Can someone help me? Thanks in advance
Click to expand...
Click to collapse
You have gone to "Modules" in the Xposed installer app and made sure to check the check boxes for each module and then rebooted?
Sent from my SCH-R220

mattzeller said:
You have gone to "Modules" in the Xposed installer app and made sure to check the check boxes for each module and then rebooted?
Click to expand...
Click to collapse
Of course Yes, here Is the screen:

Matteo Gamba said:
Of course Yes, here Is the screen:
Click to expand...
Click to collapse
I figured you did, I just wanted to make sure. Post the log from Xposed so we can see where the problem possibly is
Sent from my SCH-R220

mattzeller said:
I figured you did, I just wanted to make sure. Post the log from Xposed so we can see where the problem possibly is
Click to expand...
Click to collapse
Here you are:

Matteo Gamba said:
Here you are:
Click to expand...
Click to collapse
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Sent from my SCH-R220

mattzeller said:
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Click to expand...
Click to collapse
My device Is pure aosp, not touchwiz. Wiko uses MyOS that include only a Launcher. I'll try v85 and v84 and i'll Save logs. Thanks for helping me

mattzeller said:
It is showing none of your modules loading, you may need a different Xposed build. Have you checked the thread for your device? Some devices need specific Xposed builds.
Click to expand...
Click to collapse
I tried even v72 but dont work, modulez dont work.

Matteo Gamba said:
I tried even v72 but dont work, modulez dont work.
Click to expand...
Click to collapse
Have you checked the thread for your particular device?
Sent from my SCH-R220

mattzeller said:
Have you checked the thread for your particular device?
Click to expand...
Click to collapse
My device isn't present

Matteo Gamba said:
My device isn't present
Click to expand...
Click to collapse
After doing a Google search for Wiko Pulp 4G Xposed, the very first link has a write up on XDA to install TWRP AND Xposed
http://forum.xda-developers.com/general/general/guide-wiko-pulp-4g-pulp-fab-4g-root-t3436580
Sent from my SCH-R220

mattzeller said:
After doing a Google search for Wiko Pulp 4G Xposed, the very first link has a write up on XDA to install TWRP AND Xposed
http://forum.xda-developers.com/general/general/guide-wiko-pulp-4g-pulp-fab-4g-root-t3436580
Click to expand...
Click to collapse
Already tried it, it's the v86 version. It don't work :/

How to hide Xposed framework?

I tried playing a game called Valkyrie Connect but it won't let me because I have Xposed. So how do I hide this "Xposed framework bridge"? I've tried SudoHide and No Device Check. None of them worked

SudoHide is only to hide root I think. You tried to hide root and disable Xposed in XposedInstaller app from DVDandroid? After playing game you can enable it again with the switch.
Sent from my S7.

ANRC

nomani7UP said:
ANRC
Click to expand...
Click to collapse
Wow it works! Thanks a bunch. You made my day :laugh::good:

nomani7UP said:
ANRC
Click to expand...
Click to collapse
thanks! it worked on mine too

Can you tell me please how ANRC worked and the steps that you made? My mail is [email protected] for tell me how.Thanks in advance

It seems Valktrie Connect just disabled all forms of play from an emulator. Is there anyway to get around this? ANRC doesn't seem to work.

newuser156 said:
Wow it works! Thanks a bunch. You made my day :laugh::good:
Click to expand...
Click to collapse
how to use ANRC????

ArtsEn said:
how to use ANRC????
Click to expand...
Click to collapse
You download it from the xposed repository, install and open, tap on an app from the list, choose a mode and tap launch. Done

newuser156 said:
You download it from the xposed repository, install and open, tap on an app from the list, choose a mode and tap launch. Done
Click to expand...
Click to collapse
yeah, but it freezes at a blank white screen