Database Develop

[ROM][4.4.4][CM11][ARM][x32][Yureka ROM Odexed & De-Odexed]

DO NOT INSTALL THIS IF YOU HAVE UPGRADED TO THE LOLLIPOP BUILD. FOR 32 BIT RECOVERY ONLY.
YU Yureka Official Cyanogen OS Odexed & De-Odexed​
This is the official untouched YU Yureka ROM zip which can be installed from custom recoveries say CWM, TWRP, Philz etc…
Installing ROM from recovery is simpler than installing firmware from fastboot (but if you soft-bricked your phone, flashing firmware may save it yeah but don't flash kk fastboot images in lolliopop fastboot as itl hard brick the device).
Odexed vs De-Odexed?
Odexed firmware is faster and more secure, but a deodexed one gives more modification to freedom, and is the only way possible to change the look and feel of system apks (theming). In actual terms, deodexed ROMs are only slower in the first ever boot, after which they are the same speed as the former ones. Also, deodex doesn’t entail any serious security risks to your device either, and you can be rest assured that the millions of users opting for these aren’t suffering (including me).
Downloads:
Odexed ROM: (DEFAULT)
Yureka_Original_ROM_Odexed
MD5: 7D3BF824F4A0D28DD578084F132DDFD8
De-Odexed ROM:
Yureka_Original_ROM_De-Odexed
It has few Force Close's. I recommend Odexed ROM.
MD5: AE73E1D0C6353E65CD9FBDB103E8631D
How To Install:
i) Place the ROM zip in the device.
ii) Reboot to your Custom Recovery CWM/TWRP/Philz.
iii) Wipe Cache, Data and System.
iv) Install the ROM Zip .
v) No need to flash Gapps, Gapps already present in system by default.
vi) The system is unrooted as its unmodified, so you might wanna install SuperSU for root access. Download and intall SuperSU.
LINK: SuperSU
vii) Reboot.
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
SOURCE:
Device
Kernel
DISCLAIMER: I'm not held responsible if somehow something bad happens to your device. I've tested the ROM in my YUREKA/AO5510/tomato and it works.
XDA:DevDB Information
Yureka Official ROM Odexed & De-Odexed, ROM for the YU Yureka
Contributors
Shivam Kumar Jha
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery say CWM, TWRP, Philz etc.
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Odexed
Stable Release Date: 2015-02-28
Created 2015-02-28
Last Updated 2015-02-28

Screenshots:

Reserved

bro how to flash this properly....
i mean step by step

Good work...

The play store keeps crashing no matter what

sharan565 said:
bro how to flash this properly....
i mean step by step
Click to expand...
Click to collapse
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
there select the ROM you downloaded odexed/ deodexed..
Iqbal641 said:
Good work...
Click to expand...
Click to collapse
sohny said:
The play store keeps crashing no matter what
Click to expand...
Click to collapse
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..

Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse

A weird question
Will i get official OTA after installing this?? as this is stock...

sharan565 said:
Shivam Kumar Jha said:
Download the ROM odexed / de-odexed..
Copy it to your device i.e., yureka..
If u dont have a custom recovery like CWM/ Philz/ TWRP flash one.. (see instructions on there respective page)..
reboot to recovery.. ( Enable developer options and enable advanced reboot menu)
now go to wipe menu., select clean to install a new ROM .. (cache, data, system, .android should be wiped)
now select install zip..
im with cwm recovery first wipe factory reset then wipe cache then we have to format system or not
i was installed other roms only i wiped factory reset and installed rom it worked i didnt wiped cache and system
Click to expand...
Click to collapse
The updater-script has a command to mount and then format system..
so doing just factory reset is totally fine...
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
Yes you will..
just make sure the update recovery while OTA is enabled in developer options (by default it is)..
or manually install the stock recovery
Click to expand...
Click to collapse

Shivam Kumar Jha said:
Did you flash Gapp's after installing the ROM??
I'm using the de-odexed one and i never observed any kind of FC's in playstore app..
Click to expand...
Click to collapse
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?

sohny said:
NO I did not flash gapps
I am using the de-odexed rom and playstore was already present, should i flash gapps?
Click to expand...
Click to collapse
Doesnt matter wont work

sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update

Is this modified?
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude

sohny said:
Doesnt matter wont work
Click to expand...
Click to collapse
try flashing CM11 gapps..
sanjeev7 said:
Will i get official OTA after installing this?? as this is stock...
Click to expand...
Click to collapse
AndroTech said:
I guess you will get OTA update but not able to install as the recovery should be stock to install the OTA update
Click to expand...
Click to collapse
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
fastboot -i 0x1ebf flash recovery recovery-s.img
Click to expand...
Click to collapse
[OPTIONAL]To re-lock your boot loader:
fastboot -i 0x1ebf oem lock
Click to expand...
Click to collapse
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
nikhilchandhra said:
I mean to ask is this rom modified from stock? if yes are few bugs solved like the headset bug? Atleast a single bug solved would be great, any ways good work dude
Click to expand...
Click to collapse
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..

Headset Bug
Shivam Kumar Jha said:
try flashing CM11 gapps..
Exactly..
FOR OTA Updates:
Download fast-boot tools.
Link: FastBoot Tools.
Download Stock Recovey.
Link: recovery-stock.img
Extract fastboot tools and place the stock recovery in it.
Power off your yureka phone.
Hold Volume Up and connect data cable to your computer.
Your device will be in fastboot mode.
In the fastboot folder in your computer, hold shift and right click.
Click on "Open Command Window here".
Type
[OPTIONAL]To re-lock your boot loader:
The process will finish within 5 seconds.
Disconnect USB and power on your yureka.
Your device is now ready to receive OTA updates!
Nope its not at all modified..
I''l prepare a custom one using the deodexed ROM as base like this one Link
Which headset bug?? tell me more about this as i did'nt face any headset issue, just one minor issue in AudioFX app..
Click to expand...
Click to collapse
The headset bug which some times irritates me to the peaks, the audio routing isnt perfect in stock, i.e even after connecting a headset the sound comes from the speaker and it can be only solved by restarting the mobile. Even though it detects the headset, when i remove the headset the audio will be still routed to headset, i.e no sound from speaker. Again a restart is needed to solve this problem. Is this problem solved? and no headset icon on connecting a headset, any way i use a third party app for that. Is this issue solved in this rom? Do say it.
---------- Post added at 11:56 AM ---------- Previous post was at 11:36 AM ----------
Could some one give me the link of the gapps for odexed rom? Thanq

sanjeev7 said:
Will i get official OTA after installing this??...
Click to expand...
Click to collapse
Shivam Kumar Jha said:
.....Your device is now ready to receive OTA updates!....
Click to expand...
Click to collapse
even if we're running stock de-odexed rom? or do we have to get back on odexed rom?
Shivam Kumar Jha said:
....I''l prepare a custom one using the deodexed ROM as base...
Click to expand...
Click to collapse
please do. and, try and keep it as slim as possible.
i'm sure there are folks who don't use much of g00gle stuff anyway.

problem in deodexed rom
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.

problems in de-odexed
gokuss1234 said:
As sohny mentioned in deodexed rom I'm getting messages that playstore, themes and cm account are stopped working. Flashing gapps didnt solved it.
Click to expand...
Click to collapse
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.

dalvi.nishant9 said:
I'm facing the same problems.
get messages that services have stopped working.
Also play store force closes everytime.
Please find a fix for this.
Click to expand...
Click to collapse
yeah i checked as it wasnt deodexed properly..
cant help this one now as im lollipop now .. cant revert back to x32 kitkat..
y dont u guyz update to lollipop as well?? make d most of ur hardware with x64 lollipop

Zuk Z2Pro Android 7 Version

Hi All,
Was finally able to get a hold of the Android 7 version for Zuk Z2pro, at this point it's in the development phase, looks pretty stable as of now, it's just been an hour since I installed it, Got it from the Chinese site ( Landlord ) a little tough to figure out the content on the site, but the ROM is in English.
I tried flashing it with the Stock Recovery but didn't work , went back to 2.3.044 and then flashed the TWRP ( Chinese Version ) Did a dirty flash, and all the sensors {Heart Rate, UV Sensor, Pedometer, Proximity, etc } seem to be working fine. The file is available in a Baidu link, and it takes a lot of time to download.
The ROM now supports themes but as of now i see only 4 inbuilt themes and no black themes. But inbuilt themes uses nice icons to make it look simple and neat. I shall post pics of the screens. Settings now show the lab features directly to play around with fake location( never got it working though ). As of now calls and Volte working fine. Haven't been successful in making video calls over LTE with Zui Roms.
Need some help in getting a cloud storage to upload the file.
If someone could help me, would be happy to upload it for the benefit of the community. Again ***** Please do install it at your own risk, make sure you backup in TWRP before you flash this ROM , the size is 1.6 GB. ***** All thanks to the Chinese forums BBS.lenovomobiles.

Screenshots
These are the screenshots
And you can download the file from :
https://drive.google.com/file/d/0B6GiX9_gwfCqVXVhRHcyVEdfbkU/view?usp=sharing
Make sure you backup in TWRP, Please use the Chinese version of the TWRP to flash this file,

More screenshots please ??

Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk

Bugs
raber111 said:
Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.

anupsnair said:
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.
Click to expand...
Click to collapse
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk

I'm not able to flash it via chinese TWRP. I've also tried TWRP from Emmaus. If someone can share a working recovery with this ROM I'll tell you my opinion about it. (Error 7 is the problem).

raber111 said:
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
TWRP works fine, just that I wasn't able to root it, Gapps not required, as I installed the Google sync app and the Google contacts previously on the 2.3.044 build since I did a dirty update, got the play store and the Google contacts in tact

cyBeRdUdE-9 said:
More screenshots please ??
Click to expand...
Click to collapse
Hi Cyberdude,
Is there any specific screen that u are looking for?

anupsnair said:
Hi Cyberdude,
Is there any specific screen that u are looking for?
Click to expand...
Click to collapse
Screens of any major UI changes ??

Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.

Root Zuk Z2pro Android 7
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,

anupsnair said:
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,
Click to expand...
Click to collapse
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk

lucaam said:
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk
Click to expand...
Click to collapse
Thank you Lucaam, for the benefit of the forum can you please post a link, when I flashed SU, the sim in my phone stopped working.

Here's to you the link https://download.chainfire.eu/750/SuperSU/BETA-SuperSU-v2.64-20151220185127.zip?retrieve_file=1 of to the file that I've downloaded. I flashed it after the first full boot.
Sent from my Z2 Pro using Tapatalk

syedtahir16 said:
Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.
Click to expand...
Click to collapse
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram

ikram.senguen said:
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram
Click to expand...
Click to collapse
I"m not certain about other backups. But I had a CM13 TWRP backup.
What I did was:
QFIL to 1.9. This should work irrespective of what recovery you have. This is like an absolute reset. Once this is done, let your phone reboot and load once.
Then adb reboot bootloader
In the bootloader mode -> Flash the recovery ( You will need to flash Emmaus recovery if you are going back to CM13).
Once flashed. You can wipe the data,system and cache. Install CM13 and you should be all set.
You could also wipe and restore any old CM13 Backup too. Hope this helps.

SOLVED
SOLVED: HOW? STRANGE!
i did everything exact same as at home, but somehow ..just somehow ..it didnt ****ed itself and didnt stuck on everywhere and indeed succeeded flashing every f****** rom!
so here a step-by-step (if some ever expirience same) thanks to you all which i can confirm:
1. flash 1.9.104 rom through qfil (let it boot..)
2. enable usb debuging through enabled developer settings
3. boot in fastboot (adb reboot bootloader) unlock bootloader with your unlock_bootloader.img (fastboot -i 0x2b4c flash unlock unlock_bootloader.img) right after that unlock it (fastboot -i 0x2b4c oem unlock-go) forreal
4. reboot, then enable usb debuging again and boot in fastboot again (adb reboot bootloader)
5. flash emmaus TWRP (fastboot flash recovery recovery.img) DO !NOT! USE ---> [fastboot -i 0x2b4c boot recovery.img] <--- CODE!
6. boot to TWRP, wipe data/cache/dalvik-cache (system not needed, better dont wipe system to be sure)
7. flash AICP, RR or CM13 .zip, NOT ANY OTHER (https://emmaus.pro/?dir=Zuk Z2 Pro & http://forum.xda-developers.com/zuk-z2-pro/development/rom-aicp-11-0-mm-6-0-1-unofficials-t3499283) those work for sure on emmaus TWRP
8. reboot, DONE
to every single zuk z2 pro user out there, please make sure your PC, USB PORT, USB-CABLE is working right, because even if everything seems right, under the hook its sometimes not. In my case, i knew it, but could not believe it since qfil showed me SUCCSESS in every section, the connection betweet cable and usb port was faulty, thats the only possibility. THANK YOU ALL VERY MUCH, this was one of the most HARD-BRIKS ive ever experienced, and ive been through S2, S3, S4, S5, S6, HTC ONE M7 hard-bricks.. so.. yeah!!! THANK YOU VERY MUCH :')

i try this zip on my twrp , but my phone are dead don't run anybody else
what i can do ?

Many thanks to you ! the flash worked very well. i had same issues here . best description ever many many thanks !!

[Recovery][EMUI 8.x][Mate 9][Unofficial]TWRP 3.2.1-0 [28/04/2018]

Disclaimer​This software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note: Currently Oreo 8.1 custom roms are not supported,only stock EMUI 8.x .
Download and Installation​
* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
Code:
fastboot flash recovery_ramdisk [filename].img --> ex: fastboot flash recovery_ramdisk twrp_mate9_0.1.img
* Restart with this command:
Code:
fastboot reboot
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Features​
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Note: There are no sources for this yet,because is based on the work of @zxz0O0 ,from Honor 9.
Contributors
**** Pretoriano80
**** @zxz0O0 - This wouldn't be possible without this guy,so big big thank to him.I used his base to make this recovery work ,so in sign of respect his nick will also be on the TWRP boot screen.Thank again buddy!
**** TeamWin project ,obviously.
**** @Tecalote - He was the main tester for this version and also he was the one that convinced me to open this thread in first place
**** @Blackball
**** Team OpenKirin - thanks for the "Oem Path wipe esclusion" code
Download links
twrp_mate9_0.1.img - initial release

Thank you for such a great project!

I am very happy with this TWRP. Everything is working so far on EMUI, Android 8.
Data wipe is possible, cause OEM Path is excluded.
Vendor.img and System.img and recovery_ramdisk can be flashed by choosing img to the related img.
Backup, restore of all shown Partitions working perfectly.
Decryption of storage if using Fingerprint /PIN is working. Full encryption support for data..
Many thanks to @Pretoriano80 for this awesome and first most complete TWRP for Mate 9 :good::good:
BTW: @Blackball had tested this TWRP for P10 Plus and it is also working on this Device (so it will run also on P10).
Many thanks for testing too :good:

This is good to know... Going to have to give this TWRP a try. So what, to decrypt data, do I just have to format data in TWRP or?

Wirmpolter said:
This is good to know... Going to have to give this TWRP a try. So what, to decrypt data, do I just have to format data in TWRP or?
Click to expand...
Click to collapse
Format data is only necessary if installing AOSP based Roms which require this (in installation guide)
But for Stock Firmware you don't need to decrypt (format) anything because encryption is fully supported
Of course, you can't install older Stock based Custom Rom which mount data in the updater-script without /dev/block/dm-0

I tried to installed on my Huawei mate using RR remix treble Rom, but It doesn't work, it just boot on the TWTP logo then boot up again.

osk4rin said:
I tried to installed on my Huawei mate using RR remix treble Rom, but It doesn't work, it just boot on the TWTP logo then boot up again.
Click to expand...
Click to collapse
We are aware of this, but this is the initial release.
It's fully working on EMUI for now.

Tecalote said:
We are aware of this, but this is the initial release.
It's fully working on EMUI for now.
Click to expand...
Click to collapse
Oh right, thanks.

Seems to work perfectly, in my case the rom doesn't even seem to be overwrite twrp upon normal boot
Thanks a lot!

osk4rin said:
Oh right, thanks.
Click to expand...
Click to collapse
If you (or anyone else) are still having/testing a custom rom, please send me /system/build.prop and vendor/build.prop.

i end up with error 255 on huawei mate 9 rooted oreo mha-l29 8.0.0.360(c567)
when i try to backup and at the beginning of twrp boot it ask me for a password

Caguayote said:
i end up with error 255 on huawei mate 9 rooted oreo mha-l29 8.0.0.360(c567)
when i try to backup and at the beginning of twrp boot it ask me for a password
Click to expand...
Click to collapse
If it's ask for password, then insert the same passwords/pin/pattern that you are using in Android, so TWRP can decrypt the internal storage.
That's the whole purpose of having a TWRP with decryption support.

10-4
Thank you for the clarification

Pretoriano80 said:
If you (or anyone else) are still having/testing a custom rom, please send me /system/build.prop and vendor/build.prop.
Click to expand...
Click to collapse
how can I get them?

osk4rin said:
how can I get them?
Click to expand...
Click to collapse
If your Phone is rooted, with Root Filemanager like FX Explorer or Mixplorer you can copy from /system/build.prop and /vendor/build.prop

Work this nougat .. ??

Tecalote said:
If your Phone is rooted, with Root Filemanager like FX Explorer or Mixplorer you can copy from /system/build.prop and /vendor/build.prop
Click to expand...
Click to collapse
I just attached the build.pro files .Using RR remix treble project

Hi, I really appreciate this recovery, just have one question: is there a way to enter the decryption pwd only once and not with every TWRP start? Would make things easier (even I understand the current way is much safer...). Thanks and respect!

_Nostromo_ said:
Hi, I really appreciate this recovery, just have one question: is there a way to enter the decryption pwd only once and not with every TWRP start? Would make things easier (even I understand the current way is much safer...). Thanks and respect!
Click to expand...
Click to collapse
No, it's designed to work like this!

Pretoriano80 said:
No, it's designed to work like this!
Click to expand...
Click to collapse
Ok, thought so, it definitely makes sense, just being a bit lazy... Thanks a lot for your prompt response, Pretoriano80! :good:

[ROM] [STOCK] [08-Mar] TWRP flashable Stock ROM [v340]

Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.

To ROOT the ROM
Flash Magisk from TWRP and you will have root access

Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......

piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.

Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen

Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available

Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do

Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app

AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...

jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269

Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST

Do these zips format internal storage or not ??

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.

aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english

arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.

.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.

Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.

.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.

TWRP not decrypting my data

I used fastboot to flash twrp-3.5.0_9-0-raphael.img. I used TWRP make a full backup to internal memory. Then I flashed xiaomi.eu_multi_HMK20ProMI9TPro_21.2.24_v12-11.zip which didn't work. So back to fastboot->TWRP to restore backup.
But it doesn't ask for my pattern anymore! All my files remain encrypted. Command line adb shell twrp decrypt fails too.
Is there a special TWRP version that can help me out? Or is it game over?

what problem did u face while flashing eu rom

Redsandro said:
I used fastboot to flash twrp-3.5.0_9-0-raphael.img. I used TWRP make a full backup to internal memory. Then I flashed xiaomi.eu_multi_HMK20ProMI9TPro_21.2.24_v12-11.zip which didn't work. So back to fastboot->TWRP to restore backup.
But it doesn't ask for my pattern anymore! All my files remain encrypted. Command line adb shell twrp decrypt fails too.
Is there a special TWRP version that can help me out? Or is it game over?
Click to expand...
Click to collapse
If possible try using oxfox to flash eu rom

Ezio553 said:
what problem did u face while flashing eu rom
Click to expand...
Click to collapse
On boot I noticed screen no longer said "Mi 9T Pro" but "Redmi", and it can only boot to "Mi-Recovery 3.0"
Ezio553 said:
If possible try using oxfox to flash eu rom
Click to expand...
Click to collapse
What is oxfox? No search results.

So it appears I made the mistake of dirty-flashing Android 11 over Android 10.
Is there any file from old ROM I can manually push back to restore the encryption key?

you are rooted via magisk?

Have you tried erasing and formatting userdata partition it might generate itself with the new encryption key you rom running

ineedroot69 said:
you are rooted via magisk?
Click to expand...
Click to collapse
No, I just flashed the ROM and rebooted. No magisk.
EDIT: I had magisk on the old/previous ROM though, if that matters.
ineedroot69 said:
Have you tried erasing and formatting userdata partition it might generate itself with the new encryption key you rom running
Click to expand...
Click to collapse
This will probably work, but I'm trying to decrypt and download my encrypted files from internal storage first.

Redsandro said:
On boot I noticed screen no longer said "Mi 9T Pro" but "Redmi", and it can only boot to "Mi-Recovery 3.0"
What is oxfox? No search results.
Click to expand...
Click to collapse
orangefox reovery and if u are storage is encrypted then u will have to format it once to decypt it